1.

25mm Pitch Miniature Crimping Connector (UL Listed)

DF13 Series

Type Mounting Type Mounting Height(h)

DIP 5.3mm

Straight Type
SMT 5.8mm
May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

Right Angle Type

DIP

3.6mm

SMT

■Features Correspond to Automatic Mounting

1. Miniature Size Secure the automatic plain area for the absorption
type automatic mounting machine.
Designed in the low profile at mounting height 5.8mm.
(SMT mounting straight type)
(For DIP type, the mounting height is to 5.3mm to the Straight Type
straight and 3.6mm at the right angle) Absorption area
2. Multi-contact
The double row type achieves the multi-contact up to 40
contacts, and secures 30% higher density in the mounting
area, compared with the single row type.
3. Correspond to Automatic Mounting
The header provides the grade with the vacuum absorption
area, and secures automatic mounting by the embossed
tape packaging.
In addition, the tube packaging can be selected. (Fig.1) Metal fitting
4. Integral Basic Function Despite Miniature Size
The header is designed in a scoop-proof box structure, and
Right Angle Type Absorption area
completely prevents mis-insertion.
In addition, the surface mounting (SMT) header is equipped
with the metal fitting to prevent solder peeling. (Fig.1)
5. UL Certifled

■Applications
Note PC, mobile terminal, miniature type business equipment,
and other various consumer equipment, including video
camera
Fig.1

2022.4 1
 DF13 Series●1.25mm Pitch Miniature Crimping Connector (UL Listed)

■Product Specifications
Specification
Current rating 1A/pin
UL Operating Temperature Range : -35 to +85ç (Note 1) Storage Temperature Range : -10 to +60ç (Note 2)
Rating
Specification 150V AC/DC Operating Moisture Range : 20 to 80% (Note 3) Storage Moisture Range : 40 to 70% (Note 2)
Voltage rating
UL 29.9V AC/DC
Item Specification Condition
1.Insulation Resistance 500Mø min. 100V DC
2.Withstanding voltage No flashover or insulation breakdown. 500V AC/1 minute
3.Contact Resistance 30mø max. 100mA
4.Vibration No electrical discontinuity of 1μs or more Frequency : 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.Humidity (Steady state) Contact resistance : 30mø max. Insulation resistance : 500Mø min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6.Temperature Cycle Contact resistance : 30mø max. Insulation resistance : 500Mø min. (-55ç : 30 minutes➝ 5 to 35ç : 10 minutes➝ 85ç : 30 minutes➝ 5 to 35ç : 10 minutes) 5 cycles
7.Durability (Mating/un-mating) Contact resistance : 30mø max. Tin plating : 30 cycles
May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

Gold plating : 50 cycles

8.Resistance to Soldering heat No deformation of components affecting performance. Flow : 250ç for 10 seconds
Manual soldering : 300ç for 3 seconds
Reflow : At the recommended temperature profile
Manual soldering : 300ç for 3 seconds
Note 1 : Includes temperature rise caused by current flow. ●UL File No. and Recognition
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. No. UL : E52653
Operating Temperature Range and Humidity range covers non conducting condition of
installed connectors in storage, shipment or during transportation.
Note 3 : Use without condensation on parts.
Note 4 : Information contained in ths catalog represents general requirements for this Series.
Contact us for the drawings and specifications for a specific part number shown.

■Materials/Finish
Product Part Material Finish Remarks RoHS2
Crimping Socket Insulator Polyamide Beige UL94V-0
Crimping Contact for Socket Contact Phosphor copper Tin plated or gold plated -- --
Insulator Polyamide Beige UL94V-0
Pin Header (Through hole) Contact Brass Tin plated -- --
Insulator Polyamide Beige UL94V-0
Yes
Pin Header (SMT Single row) Contact Brass Tin plated or gold plated -- --
Metal Fitting Phosphor copper Tin plated -- --
Insulator Polyamide Beige UL94V-0
Pin Header (SMT Double row) Contact Brass Tin plated or gold plated -- --
Metal Fitting Phosphor copper Tin plated -- --

■Product Number Structure

Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.

●Connector DF13 - * S - 1.25 C

q w e r t

q Series Name : DF13 e Connector Type t Connection Form / Contact Style.

w Number of Contacts S : Single row socket C : Crimping socket
r Single row : 2 to 12, 14, 15 P : Single row pin header DSA : Straight through hole
r Double row : 10, 20, 30, 40 DS : Double row socket DS : Right angle through hole
DP : Double row pin header V : Straight SMT
r Contact Pitch : 1.25mm H : Right angle SMT
●Contact
q Style Symbol e Packaging Type SCF : Socket Contact/Reel
DF13 # - 2630 SCF A Blank : Standard
G : Low insertion / extraction r Plating Type Blank : Tin plated
q w e r
w Applicable Cable Size 2630 : 26 to 30 AWG A : Gold plated
3032 : 30 to 32 AWG

2
 DF13 Series●1.25mm Pitch Miniature Crimping Connector (UL Listed)

■Single Row Socket

May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

Photo: Contact insertion

Unit : mm
Part No. HRS No. No. of Contacts A B Part No. HRS No. No. of Contacts A B
DF13-2S-1.25C 536-0001-4 2 1.25 4.15 DF13- 9S-1.25C 536-0008-3 9 10.00 12.90
DF13-3S-1.25C 536-0002-7 3 2.50 5.40 DF13-10S-1.25C 536-0009-6 10 11.25 14.15
DF13-4S-1.25C 536-0003-0 4 3.75 6.65 DF13-11S-1.25C 536-0010-5 11 12.50 15.40
DF13-5S-1.25C 536-0004-2 5 5.00 7.90 DF13-12S-1.25C 536-0011-8 12 13.75 16.65
DF13-6S-1.25C 536-0005-5 6 6.25 9.15 DF13-13S-1.25C 536-0012-0 13 15.00 17.90
DF13-7S-1.25C 536-0006-8 7 7.50 10.40 DF13-14S-1.25C 536-0013-3 14 16.25 19.15
DF13-8S-1.25C 536-0007-0 8 8.75 11.65 DF13-15S-1.25C 536-0014-6 15 17.50 20.40
Note 1 : The quantity is delivered per bag (100pcs.). If needed, please select and order the products per bag.

■Double Row Socket

Photo: Contact insertion state

Unit : mm
Part No. HRS No. No. of Contacts A B
DF13-10DS-1.25C 536-0550-2 10 10.40 5.00
DF13-20DS-1.25C 536-0555-6 20 16.65 11.25
DF13-30DS-1.25C(10) 536-0560-6 10 30 22.90 17.50
DF13-40DS-1.25C(10) 536-0565-0 10 40 29.15 23.75
Note : The quantity is delivered per bag (100pcs). If needed, please select and order the products per bag.

3
 DF13 Series●1.25mm Pitch Miniature Crimping Connector (UL Listed)

■Single Row Straight Pin Header (Through hole)

[Specific No.]
(05) : Tin plated
(25) : Tin plated, tube packaging

BTube Dimensions
5

10
●Board Through-hole Diameter : Ø0.6±0.03
May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

Unit: mm
Part No. HRS No. No. of Contacts A B Tube Packaging Quantity Part No. HRS No. No. of Contacts A B Tube Packaging Quantity
DF13-2P-1.25DSA(**) 536-0101-9 ** 2 1.25 4.15 115 DF13- 9P-1.25DSA(**) 536-0108-8 ** 9 10.00 12.90 37
DF13-3P-1.25DSA(**) 536-0102-1 ** 3 2.50 5.40 89 DF13-10P-1.25DSA(**) 536-0109-0 ** 10 11.25 14.15 34
DF13-4P-1.25DSA(**) 536-0103-4 ** 4 3.75 6.65 72 DF13-11P-1.25DSA(**) 536-0110-0 ** 11 12.50 15.40 31
DF13-5P-1.25DSA(**) 536-0104-7 ** 5 5.00 7.90 61 DF13-12P-1.25DSA(**) 536-0111-2 ** 12 13.75 16.65 29
DF13-6P-1.25DSA(**) 536-0105-0 ** 6 6.25 9.15 52 DF13-13P-1.25DSA(**) 536-0112-5 ** 13 15.00 17.90 27
DF13-7P-1.25DSA(**) 536-0106-2 ** 7 7.50 10.40 46 DF13-14P-1.25DSA(**) 536-0113-8 ** 14 16.25 19.15 25
DF13-8P-1.25DSA(**) 536-0107-5 ** 8 8.75 11.65 41 DF13-15P-1.25DSA(**) 536-0114-0 ** 15 17.50 20.40 23
Note 1 : The quantity at the specific No."05" is delivered per bag (100pcs.). If needed, please select and order the products per bag.
Note 2 : Order the tube packaging product, multiplying the tube packaging quantity.

■Single Row Right Angle Pin Header (Through hole)

[Specific No.] (**), **

(25) : Tin plated tube packaging

BTube Dimensions

●Board Through-hole Diameter : Ø0.6±0.03

Unit : mm
Part No. HRS No. No. of Contacts A B Tube Packaging Quantity Part No. HRS No. No. of Contacts A B Tube Packaging Quantity
DF13-2P-1.25DS(25) 536-0151-7 25 2 1.25 4.15 115 DF13- 9P-1.25DS(25) 536-0158-6 25 9 10.00 12.90 37
DF13-3P-1.25DS(25) 536-0152-0 25 3 2.50 5.40 89 DF13-10P-1.25DS(25) 536-0159-9 25 10 11.25 14.15 34
DF13-4P-1.25DS(25) 536-0153-2 25 4 3.75 6.65 72 DF13-11P-1.25DS(25) 536-0160-8 25 11 12.50 15.40 31
DF13-5P-1.25DS(25) 536-0154-5 25 5 5.00 7.90 61 DF13-12P-1.25DS(25) 536-0161-0 25 12 13.75 16.65 29
DF13-6P-1.25DS(25) 536-0155-8 25 6 6.25 9.15 52 DF13-14P-1.25DS(25) 536-0163-6 25 14 16.25 19.15 25
DF13-7P-1.25DS(25) 536-0156-0 25 7 7.50 10.40 46 DF13-15P-1.25DS(25) 536-0164-9 25 15 17.50 20.40 23
DF13-8P-1.25DS(25) 536-0157-3 25 8 8.75 11.65 41
Note 1 : Order the tube packaging product, multiplying the tube packaging quantity.

4
 DF13 Series●1.25mm Pitch Miniature Crimping Connector (UL Listed)

■Single Row Straight Pin Header (SMT)

■(Three-Wall/Correspond to Vacuum Absorption)
BPCB mounting pattern

1.8
May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

Note 1.Shaded area must be free of any

electrically conductive traces to
avoid contact with soldered pin
header terminations.

This pin header is a three-wall type, header has sufficiently large flat areas to allow [Specific No.] (**), **
pick-up with vacuum nozzles of automatic placement equipment. (21) : Tin plated embossed tape packaging
(51) : Gold plated embossed tape packaging

Unit : mm
Emboss
Part No. HRS No. No. of Contacts A B C D E F
Width
DF13C- 2P-1.25V(**) 536-0401-2 ** 2 1.25 4.15 7.15 5.65 1.95 2.20 16
DF13C- 3P-1.25V(**) 536-0402-5 ** 3 2.50 5.40 8.40 6.90 3.20 3.45 16
DF13C- 4P-1.25V(**) 536-0403-8 ** 4 3.75 6.65 9.65 8.15 4.45 3.10 24
DF13C- 5P-1.25V(**) 536-0404-0 ** 5 5.00 7.90 10.90 9.40 5.70 4.35 24
DF13C- 6P-1.25V(**) 536-0405-3 ** 6 6.25 9.15 12.15 10.65 6.95 5.60 24
DF13C- 7P-1.25V(**) 536-0406-6 ** 7 7.50 10.40 13.40 11.90 8.20 6.85 24
DF13C- 8P-1.25V(**) 536-0407-9 ** 8 8.75 11.65 14.65 13.15 9.45 8.10 24
DF13C- 9P-1.25V(**) 536-0408-1 ** 9 10.00 12.90 15.90 14.40 10.70 9.35 24
DF13C-10P-1.25V(**) 536-0409-4 ** 10 11.25 14.15 17.15 15.65 11.95 10.60 24
DF13C-11P-1.25V(**) 536-0410-3 ** 11 12.50 15.40 18.40 16.90 13.20 11.85 32
DF13C-12P-1.25V(**) 536-0411-6 ** 12 13.75 16.65 19.65 18.15 14.45 13.10 32
DF13C-14P-1.25V(**) 536-0413-1 ** 14 16.25 19.15 22.15 20.65 16.95 15.60 32
DF13C-15P-1.25V(**) 536-0414-4 ** 15 17.50 20.40 23.40 21.90 18.20 16.85 44
Note 1 : Please order the embossed tape packaging product according to reel number. (1000pcs/reel)

5
 DF13 Series●1.25mm Pitch Miniature Crimping Connector (UL Listed)

■Single Row Right Angle Pin Header (SMT)

■(Four-Wall/Correspond to Vacuum Absorption)
BPCB mounting pattern

1.8
May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

[Specific No.] (**), **

(21) : Tin plated embossed tape packaging
(51) : Gold plated embossed tape packaging

Unit : mm
Emboss
Part No. HRS No. No. of Contacts A B C D
Width
DF13A- 2P-1.25H(**) 536-0301-8 ** 2 1.25 4.15 7.15 5.65 16
DF13A- 3P-1.25H(**) 536-0302-0 ** 3 2.50 5.40 8.40 6.90 16
DF13A- 4P-1.25H(**) 536-0303-3 ** 4 3.75 6.65 9.65 8.15 24
DF13A- 5P-1.25H(**) 536-0304-6 ** 5 5.00 7.90 10.90 9.40 24
DF13A- 6P-1.25H(**) 536-0305-9 ** 6 6.25 9.15 12.15 10.65 24
DF13A- 7P-1.25H(**) 536-0306-1 ** 7 7.50 10.40 13.40 11.90 24
DF13A- 8P-1.25H(**) 536-0307-4 ** 8 8.75 11.65 14.65 13.15 24
DF13A- 9P-1.25H(**) 536-0308-7 ** 9 10.00 12.90 15.90 14.40 24
DF13A-10P-1.25H(**) 536-0309-0 ** 10 11.25 14.15 17.15 15.65 24
DF13A-11P-1.25H(**) 536-0310-9 ** 11 12.50 15.40 18.40 16.90 32
DF13A-12P-1.25H(**) 536-0311-1 ** 12 13.75 16.65 19.65 18.15 32
DF13A-14P-1.25H(**) 536-0313-7 ** 14 16.25 19.15 22.15 20.65 32
DF13A-15P-1.25H(**) 536-0314-0 ** 15 17.50 20.40 23.40 21.90 44
Note 1 : Please order the embossed tape packaging product according to reel number. (1000pcs/reel)

6
 DF13 Series●1.25mm Pitch Miniature Crimping Connector (UL Listed)

■Double Row Straight Pin Header (SMT)

■(Four-Wall/Correspond to Vacuum Absorption)
May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

BPCB mounting pattern

Note 1. Shaded area must be free of any electrically

conductive traces to avoid contact with soldered [Specific No.] (**), **
pin header terminations. (22) : Tin plated embossed tape packaging
(52) : Gold plated embossed tape packaging

Unit : mm
Spec No. Spec No. Emboss
Part No. HRS No. No. of Contacts A B C
(22) (52) Width
DF13EA-10DP-1.25V(**) 536-0570-0 10 12.10 5.00 8.70 ✔ ✔ 24
DF13EA-20DP-1.25V(**) 536-0571-0 20 18.35 11.25 14.95 ✔ ✔ 32
DF13EA-30DP-1.25V(**) 536-0572-0 30 24.60 17.50 21.20 ✔ ✔ 44
DF13EA-40DP-1.25V(**) 536-0573-0 40 30.85 23.75 27.45 – ✔ 44
Note 1 : Please order the embossed tape packaging product according to reel number. (1000pcs/reel)
Note 2 : The absorption cap is attached to the embossed tape packaging product.

7
 DF13 Series●1.25mm Pitch Miniature Crimping Connector (UL Listed)

■Crimping Contact
KDF13G
KDF13 1
1.5 0.15

0.8
3.7
3.3

0.9
2
0.5
7.2
May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

8
 DF13 Series●1.25mm Pitch Miniature Crimping Connector (UL Listed)
May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

BApplication Pattern
SMT Through hole SMT
(Single Row Product) (Single Row Product) (Double Row Product)
Right Angle
Straight

9
 DF13 Series●1.25mm Pitch Miniature Crimping Connector (UL Listed)

BEmbossed Carrier Tape Dimensions

KDF13C-*P-1.25V (**)
2±0.1（Ａ＜44ｍｍ）
2±0.15（Ａ≧44ｍｍ） A−A

Ø5.25 ＋0.1

1.75±0.1
5.2±0.15 （1.4）

0
Ａ

.2
12±0.1 4±0.1 2±0.5

0
0.4±0.1

3±
Ø1
Product name label

Ｃ±0.1
Ø21±0.8

（Ø80）
Ø370±2
Ｂ±0.1
A±0.3
Ａ

Ａ
May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

＋2
Ａ D 0
（D＋6）MAX
DIRECTION OF UNREELING

KDF13A-*P-1.25H (**)
2±0.1(A<44mm)
12±0.1 2±0.15(A≧44mm) A−A
1.75±0.1

4±0.1 Ａ (1.1)

0.2
4.1±0.15 2±0.5
0.3±0.1

3±
Ø1
Product name label
Ｃ±0.1

Ａ
Ａ±0.3
Ｂ±0.1

（Ø80）
Ø330±2
Ø21±
0.8

Ａ
Direction of unreeling D 0
＋2

（D＋6）MAX

KDF13EA-*DP-1.25V (**)
1.75±0.1
0 .1

13±0.1 2±0.1 A−A

.5 ＋0

4±0.1 Ａ 0.38 5.1

Ø1

2±0.5
C±0.1

Product name label

Ａ Ａ
＊

（Ø80）
Ø370±2
B±0.1
A±0.3

Ø2

＋2
D 0
0.5

1±

（D＋6）MAX
3±

0.
8
Ø1

Ａ
Unreeling direction
Unit : mm
Product Type Size No. of Contacts A B C D
2, 3 16 ––––––– 7.5 16.4
DF13C-*P-1.25V (**) 4 to 10 24 ––––––– 11.5 24.4
DF13A-*P-1.25H (**) 11 to 14 32 28.4 14.2 32.4
15 44 40.4 20.2 44.4
Note : The 13 contacts is not serialized.
Unit : mm
Product Type Size No. of Contacts A B C D
10 24 ––––––– 11.5 24.4
DF13EA-*DP-1.25V (**) 20 32 28.4 14.2 32.4
30 to 40 44 40.4 20.2 44.4

10
 DF13 Series●1.25mm Pitch Miniature Crimping Connector (UL Listed)

BPrecautions
1. Recommended Temperature
Profile (SMT)
10sec MAX
MAX 250℃
250
230℃

200

TEMPERATURE（℃）
190℃

170
May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

100

0
TIME（Sec）
60-120sec 60sec MAX
PRE-HEATING TIME SOLDERINGTIME

[Applicable Conditions]
1. Peak temperature : 250℃ max.
2. Heating area : 230℃ min. for less than 60 seconds
3. Preheating area : 170℃ to 190℃ for 60 to 120 seconds
4. Number of times : no more than 2 times
* Measurement is conducted at the contact lead part
Soldering results may change depending on conditions such as solder paste type,
manufacturer, PCB size, and other soldering materials.
Please determine all mounting conditions before use.

Note 1 : This temperature profile is a recommended value.

Note 2 : Up to 2 cycles of Reflow soldering are possible under the same conditions, provided
that there is a return to normal temperature between the first and second cycle.
Note 3 : The temperature profile indicates the board surface temperature at the point
of contacts with the connector terminals.
Note 4 : Slight variations in color of the plastic compounds do not affect form, fit or function
of the connector.
2. Recommended Screen
0.15 to 0.2mm
Thickness (SMT)
3. Board Warpage (SMT) Max 0.03mm in the connector center area, based on both connector edges
4. Recommended Manual
290±10ç for 2 seconds max.
Soldering Condition
5. Cleaning Condition Refer to Wire to board connector Use Hand book.
IPA cleaning is allowed. (Cleaning is not recommended because cleaning may change the
mating/withdrawal feeling etc. Please contact us when you use other cleaning agents.)
6. Cautions ■Be careful for the excessive scoop insertion/extraction, which will cause damage to the product.
7. Precautions Please refer to following documents in handling this product.
■Crimp quality standards (ETAD-H0895-00, ETAD-H0953-00)
■Wire to board connector Use Hand book.

11
 DF13 Series●1.25mm Pitch Miniature Crimping Connector (UL Listed)

BPrecautions
<Precautions at Time of Insertion> <Precautions at Time of Disconnection>
Align with the connector form and press down Align with the connector form and press down
continue pressing until there is a tactile click. continue pressing until there is a tactile click.

Handing Handing
Method : Lightly grasping the base the cable, press Method : Grasp the cable so that the entire cable is
the connector with your finger and insert it. pulled evenly and it out.

Insertion Angle Angle of Removal

Caution : Do not insert at an angle of 30° or greater. Caution : Do not remove at an angle of 30° or greater.
Doing so will cause contact deformation or Doing so will cause contact deformation or
May.1.2023 Copyright 2023 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

case damage. case damage.

Method : Insert with the connector parallel. Method : Remove with the connector parallel.

Parallel Diagonal Parallel Diagonal

Parallel Diagonal Parallel Diagonal

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
12 The contents of this catalog are current as of date of 04/2022. Contents are subject to change without notice for the purpose of improvements.