DESMA | TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS
MACHINE TYPE SIGMA SERIES SIGMA F SERIES SIGMA SE SERIES
MODEL SIGMA 160 SIGMA 250 SIGMA 400 SIGMA 100F SIGMA 160F SIGMA 250F SIGMA 250SE SIGMA 400SE
Clamping type Fully hydraulic Fully hydraulic Fully hydraulic Fully hydraulic Fully hydraulic Fully hydraulic Fully hydraulic Fully hydraulic
EUROMAP size indication 1600 – 850 2500 – 3400 4000 - 7000 1000 – 850 1600 – 1700 2500 – 3400 2500 – 4500 4500 – 17000
Injection unit - standard size 2A 3A 4A 1A 2A 3A 3.1A 5.2A
Injection unit - options size 1A 1A and 2A 2A and 3A 2A 1A and 3A 1A and 3A 2A,3A and 4A 3A and 4A
Injection unit - System: A - size: 2A 3A 4A 1A 2A 3A 3.1A 5.2A
Injection piston diameter mm 75 85 85 95 105 115 55 65 75 85 85 95 85 95 125 140
Injection pressure bar 2150 1670 2160 1730 2180 1820 2390 1710 2150 1670 2160 1730 2160 1730 1740 1385
Injection volume cm³ 800 1000 1600 2000 3300 4000 350 500 800 1000 1600 2000 2200 2700 10000 12500
Piston stroke mm 180 180 290 290 390 390 150 150 180 180 290 290 390 390 820 820
Injection force kN 950 950 1227 1227 1886 1886 567 567 950 950 1227 1227 1227 1227 2138 2138
Injection volume, calculated cm³/s 54 70 79 99 126 151 49 68 54 70 79 99 75 93 245 305
Screw diameter mm 35 45 55 25 35 45 45 65
Screw length L:D 10:1 10:1 10:1 10:1 10:1 10:1 10:01 14:01
Screw speed rpm 20 - 170 20 - 102 20 - 130 20 - 170 20 - 170 20 - 102 20 - 102 20 - 150
Screw, torque, maximum Nm 540 1260 1370 380 540 1260 1260 1940
Heating capacity temp. control kW 1 x 4.5 1 x 4.5 2 x 4.5 1 x 4.5 1 x 4.5 1 x 4.5 1 x 4.5 3 x 4.5
Injection unit contact force kN 50 80 80 50 50 80 80 80
Clamping unit
Clamping force (Increased) kN 1600 (1700) 2500 (2700) 4000 (4500) 1000 (1100) 1600 (1700) 2500 (2700) 2500 (2700) 4500
Transfer force kN 1600 2500 4000 1000 1600 2500 2500 4500
Transfer stroke mm Fully hydraulic Fully hydraulic Fully hydraulic Fully hydraulic Fully hydraulic Fully hydraulic Fully hydraulic Fully hydraulic
Opening force kN 38 58 93 38 38 58 58 92
Opening stroke mm 450 500 600 550 450 500 500 500
Opening speed mm/s 300 300 295 300 300 300 280 460
Closing speed mm/s 470 425 430 470 470 425 400 280
Mould height, minimum mm 100 100 180 200 100 250 100 330
Daylight distance, maximum mm 550 600 780 750 550 750 600 830
Clearance between tie bars mm 305 x 570 410 x 680 490 x 830 305 x 440 305 x 570 410 x 685 410 x 680 490 x 830
Heating platen, standard (W x L) mm 450 x 510 560 x 630 670 x 780 320 x 400 450 x 510 560 x 630 670 x 1000 670 x 1450
Optional Heating Plate mm 560 x 510 670 x 650 810 x 980 400 x 500 560 x 510 650 x 650 670 x 1000 810 x 1450
Hydraulic core lifting device
Lifting force Fixed platen extends kN 24.5 24.5 58 24.5 24.5 24.5 24.5 58
Lifting force Fixed platen retracts kN 14.5 40.2 98 14.5 14.5 40.2 40.2 98
Lifting force Mov. platen extends kN 40.2 63 98 24.5 40.2 63 63 98
Lifting force Mov. platen retracts kN 24.5 38 58 14.5 24.5 38 38 58
Stroke Lifting device Fixed platen mm 0 - 200 0 – 250 0 - 300 0 - 200 0 - 200 0 – 250 0 – 250 0 – 300
Stroke Lifting device Mov. platen mm 0 - 250 0 - 250 0 - 300 0 - 200 0 - 250 0 - 250 0 - 250 0 - 300
General data
Pump drive bar 260 (276) 250 (265) 251 (283) 263 (289) 260 (276) 250 (265) 250 (265) 283
l/min 28 41 66 28 28 41 41 103
kW 7.5 15 22 7.5 7.5 15 15 30
Total connected load kW 28 38 56 21 28 38 50 102
Machine dimension (L x W x H) mm 2460x1260x2965 2760x1305x3330 3170x1315x4005 2100x1220x3650 2320x1020x3260 3760x1300x3475 2760x1305x3330 3870x1315x4070
Oil tank capacity l 270 330 450 120 270 330 330 450
Weight with hydraulic oil kg 6000 7400 13900 4500 6000 8650 8170 17450

• Machine safety: Standard supply is conforming to IS:11016 & IS:11743.

* CE, conforming to EN 201 is offered optionally.
# With Standard heating platen. EN 201
Design and specifications are subject to change without notice or obligation. (Optional)