GANPAT UNIVERSITY
FACULTY OF ENGINEERING & TECHNOLOGY
Programme Bachelor of Technology Branch/Spec. ALL
Semester I Version 2.0.0.1
Effective from Academic Year 2022-23 Effective for the batch Admitted in July 2022
Course Code 2ES1101 Course Name Engineering Graphics
Teaching Scheme Examination Scheme (Marks)
(Per week) Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW
Credit 3 0 1 0 4 Theory 40 60 100
Hours 3 0 2 0 5 Practical 30 20 50
Pre-requisites:
Not Required
Course Outcomes:
On successful completion of this course, the students will be able to:
CO1 Prepare engineering drawings as per BIS conventions mentioned in the relevant codes.
CO2 Produce basic and intermediate geometry.
CO3 Use the knowledge of orthographic projections to represent engineering information/ Concepts and
present the same in the form of drawings.
CO4 Develop isometric drawings of simple objects reading the orthographic projections of those objects
CO5 Convert pictorial and isometric views of simple objects to orthographic views.
Theory syllabus
Unit Content Hrs
1 Introduction: 3
Importance and application of Engineering Drawing, Engineering Drawing Instruments and
uses, B.I.S code Lines, Dimensioning, Scales, basic geometrical construction.
2 Loci of Point: 4
Path of the points moving on simple arrangements and simple Mechanism, Slider Crank
Mechanism, Four bar Chain Mechanism etc.
3 Engineering Curves: 8
Construction of Conics curves by different methods, construction of cycloid, epicycloids and
hypocycloid, Involutes, Spirals and Helix.
4 Projection of Points and Straight Lines: 5
Introduction to principal planes of projections, Notation System- Points in First, Second, Third
and Fourth quadrants, Projections of line Parallel to Two and Perpendicular to one of the
principal planes, Line parallel to one and inclined to two principal planes, Line inclined to all the
three principal planes, True length of the line and its inclination with the reference planes.
5 Projection of Planes: 4
Concept of different planes, Projections of planes with its inclination to one principal plane and
with two principal planes. Concept of auxiliary plane method for projections of the plane.
6 Projection of Solids and Sections of Solids: 6
Classifications of Solids, Projections of solids like Cylinder, Cone, Pyramid and Prism with its
inclination to one reference plane and with two reference planes. Section of solids and the true
shape of the section.
7 Development of surfaces: 4
Methods of development of lateral surface of right solids, Parallel line development,
Radial line development.
8 Orthographic Projections & Sectional Orthographic Projections: 4
Principle of projection, Principal planes of projection, Projections from the pictorial view of the
object on the principal planes for View from Front View from Top View from Side using first
angle projection method and third angle projection method, Full Sectional View.
9 Isometric Projections and Isometric View or Drawing: 4
Isometric Scale, Conversion of orthographic views into isometric projection, isometric view or
drawing.
10 Conventional representation 3
Symbols for standard components such as nuts, bolts, locking devices, riveted and welded joints,
foundation bolts, piping symbol, hydraulic and pneumatic.
Practical Content
Practical, assignments and tutorials are based on above syllabus.
Text Books
1 P. J. Shah "Engineering Graphics"S. Chand & Company Ltd., New Delhi, 2014.
2 P. S. Gill "Engineering Drawing" S.K.Kataria& sons, Delhi, 13th Edition 2016
Reference Books
1 Arunoday Kumar "Engineering Graphics – I and II", Tech – Max Publication, Pune, 3rd Edition 2010.
2 N. D. Bhatt "Elementary Engineering Drawing",Charotar Publishing House, Anand, 2013.
3 R. K. Dhawan "Engineering Drawing", S.Chand& Company Ltd., New Delhi, 1997.
4 K. Venugopal "Engineering Drawing and Graphics", New Age International Publication, 5th Edition
5 T. Jeyapoovan "Engineering Drawing & Graphics using Auto CAD 2000",Vikas Publishing House Pvt.
Ltd., New Delhi, 5th Edition 2011.
6 D. A. Jolhe "Engineering Drawing with an Introduction to AutoCAD", Tata McGraw-Hill
Publishing Co. Ltd., New Delhi, 2007.
ICT/MOOCs references
1 https://www.youtube.com/watch?v=n5Ba6OtDpTU (Introduction of Engineering Graphics)
2 https://www.youtube.com/watch?v=VjvAGUkK8Nw(Loci of Point)
3 https://www.youtube.com/watch?v=pr68iKcJy3g&list=PL0onWcajDQkzkvJXJQbyNxZwyOCl5-vn0
(Engineering Carves)
4 https://www.youtube.com/watch?v=L0bkxRl1joI (Projection of Points and Straight line)
5 https://www.youtube.com/watch?v=7-
zq81tDwmM&index=2&list=PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg&pbjreload=10 (Projection
of Planes)
6 https://www.youtube.com/watch?v=9hD7q2CqAOA (Section of Solid)
7 https://www.youtube.com/watch?v=zIblZ7dt3Dk (Development of Surface)
8 https://www.youtube.com/watch?v=9UMxr7BT8CE(Interpenetration of Solid)
9 https://www.youtube.com/watch?v=f1Hdtf_iAWk (Orthographic Projection Problem)
10 https://www.youtube.com/watch?v=sSuyM60s7eA (Isometric view)
11 https://www.youtube.com/channel/UC-SJ1JrY_uAe07ljt9Yndxg/playlists (All chapter)
Mapping of CO with PO and PSO: PSO1
PSO2
PSO3
PO10
PO11
PO12
PO1
PO2
PO3
PO4
PO5
PO6
PO7
PO8
PO9
CO1 2 3 3 2 0 2 0 1 2 2 0 1 1 2 2
CO2 2 3 3 2 3 0 0 0 0 3 0 2 1 1 2
CO3 2 2 3 1 0 0 0 0 0 3 0 2 2 0 1
CO4 3 2 3 3 0 0 0 0 2 2 0 1 1 0 2
CO5 3 2 2 2 0 0 0 0 2 3 2 2 1 0 2
