High Voltage Products | Hybrid switchgear
Plug And Switch System
PASS M0S 245kV
Product information
PASS M0S belongs to Hitachi
Energy’s innovative high-voltage
hybrid switchgear family PASS
(Plug and Switch System).
PASS encloses all functions of
a complete switchgear bay in a
single module.
The hybrid design makes use of SF6 insulated metal enclosed
components such as circuit breaker, combined disconnector and
earthing switch, while the interface with other equipment within the
substation is made through composite bushings and air-insulated
busbars.
Design Key benefits of the product
PASS modules are completely factory assembled and tested ready
• Enhanced product lifetime by using double-motion self-blast
for rapid installation and energization. PASS M0S is available in
interrupter, which significantly reduces energy needed to
single busbar, double busbar, double circuit breaker and H-configu-
operate the circuit breaker
ration as well as numerous customized configurations.
• Highly flexible and customizable product
• Minimization of on-site activities by optimized packing and delivery
Hybrid switchgear comes with outstanding compactness for trans-
arrangement
mission-level substations. It provides reliable operations even in
• Reduced environmental impact with type tested leakage rate
extreme climates and in high altitude applications.
< 0.1%/y
• Disconnectors performances as per most actual IEC standards-
Induced current IEC 62271-102 Ed. 2.1 and Bus transfer IEC
62271-102 Ed. 2.1
• Maintenance friendly design
• Suitable for controlled switching applications
• Utilizes Hitachi Energy's newest generation of the well-known and
widely applied FSA operating mechanism supported by Hitachi
Energy's global service network
Plug And Switch System
PASS M0S 245kV
5
7
1. Circuit breaker
4
2 2. Double Busbar Configuration Module
1
3. Circuit breaker FSA drive
6 4. Combined Disconnector BES8 drive
3
5. Polymeric bushing
6. Local control cubicle
7. Ring core current transformer
Performance data M0S 245 kV
Rated voltage kV 245
Rated interrupting (short-circuit) current kA 50
Rated interrupting (breaking) time 2 cycles (50 Hz); 2.5 cycles (60 Hz)
Rated continuous (normal) current A 4000
Rated frequency Hz 50/60
First-pole-to-clear factor (kpp) 1.3/1.5
Rated capacitive switching class / kc C2/1.4
Rated mechanical endurance class M2
Minimum ambient temperature C -30°
Interrupter type Double-motion, self-blast
Operating mechanism type Spring
FSA Operating mechanism housing ingress
IP 65
protection rating
Local Control Cubicle housing ingress
IP55
protection rating
Applicable standards IEC & ANSI/IEEE
Bus transfer rating 2400A/350V
We reserve the right to make technical chang- We reserve all rights in this document and in the
es or modify the contents of this document subject matter and illustrations contained there-
without prior notice. With regard to purchase in. Any reproduction, disclosure to third parties
Hitachi Energy orders, the agreed particulars shall prevail. or utilization of its contents – in whole or in parts
High Voltage Products Hitachi Energy Ltd. does not accept any re- – is forbidden without prior written consent of
Hybrid switchgear sponsibility whatsoever for potential errors or Hitachi Energy Ltd.
[email protected] possible lack of information in this document.
www.hitachienergy.com 9AKK108467A8031 EN / A23