Global Mixed-mode Technology G5764

3A Step-down DC/DC
Features General Description
„ 3A Output Current The G5764 is a monolithic step-down switch mode
„ 0.15Ω Internal Power MOSFET Switch regulator with a built in internal power MOSFET. It
„ Stable with Low ESR Output Ceramic Capacitors achieves 3A continuous output current over a wide input
„ Up to 95% Efficiency supply range with excellent load and line regulation.
„ 30µA Shutdown Mode
„ Fixed 380kHz Frequency Current mode operation provides fast transient re-
„ Thermal Shutdown sponse and eases loop stabilization.
„ Cycle-by-Cycle Over Current Protection
Fault condition protection includes cycle-by-cycle cur-
„ Wide 4.5V to 28V Operating Input Range
„ Output Adjustable from 1.22V to 21.6V rent limiting, output short circuit protection and thermal
„ Available in SOP-8 (FD) Package shutdown. In shutdown mode the regulator draws
30µA of supply current. Programmable soft-start over-
Applications writes the internal soft-start for various requirement of
„ PC Monitors output power up ramp and minimizes the inrush supply
„ DSL Modems current at initial startup.
„ Distributed Power Systems
„ Pre-Regulator for Linear Regulators The G5764 requires a minimum number of readily
available standard external components. It is available
in a SOP-8 (FD) package.

Ordering Information
ORDER TEMP. PACKAGE
MARKING
NUMBER RANGE (Green)
G5764F11U G5764 -40°C to +85°C SOP-8 (FD)
Note: F1: SOP-8 (FD)
1: Bonding Code
U : Tape & Reel
Pin Configuration Typical Application Circuit

C5
10nF
G5764 INPUT
12V C1
10µF 2 1 L1
BS 1 8 SS
35V IN BS 15µH
7 3 OUTPUT
OFF ON EN LX
IN 2 7 EN R1
2.5V/3A
Thermal D1
G5764 10.5kΩ
Pad 8 5
LX 3 6 COMP SS FB
COMP 1%
C4 GND
GND 4 5 FB 10nF 4 6 R2 C2
C3 10kΩ 22µF/35V
SOP-8 (FD) C6 1nF 1% CERAMIC
OPEN R3
Note: Recommend connecting the Thermal Pad to
15kΩ
the Ground for excellent power dissipation.

Ver: 0.1 TEL: 886-3-5788833