Aluminium and Steel Jacks

▼ Shown from left to right: JHA-356, JHA-156

JH, JHA
Series
Capacity:
7 - 100 ton
Stroke:
76 - 155 mm
Maximum Operating Pressure:
700 bar

Lifting Wedge and

Machine Lifts
Ideal to lift the load the first few
centimeters. The LW-16 Lifting
Wedge requires a very small
access gap of only 10 mm.

Page: 178
• All-directional operation on 7, 15 and 35 ton JHA-series
Load Skates
• Internal relief valve to prevent overloading
For moving heavy loads easily
• Machined flat front and bottom surfaces permit flush alignment in and safely.
tight corners
• Chrome plated plungers
• Pumping handle included Page: 180
• Automatic by-pass port to prevent over-extension (JH-series).

Style Jack Stroke Model Jack Collapsed Extended Bottom Plate Plunger Pump
Capacity Number Effective Height Height Dimensions Diameter Speed
Area WxL
ton (kN) (mm) (cm2) (mm) (mm) (mm) (mm) (kg)

7 (62) 76 JHA-73 9,6 133 209 73 x 158 30,2 Single 5,0

Aluminium
15 (133) 153 JHA-156 20,3 247 401 92 x 238 41,4 Single 13,2
Jacks
35 (311) 155 JHA-356 45,6 257 412 117 x 254 54,1 Single 18,1
30 (267) 155 JH-306 38,3 254 409 95 x 242 69,9 Single 26,8
Steel
50 (445) 154 JH-506 62,1 260 414 127 x 258 88,9 2-Speed 40,8
Jacks
100 (890) 153 JH-1006 133,1 287 440 181 x 328 130,1 2-Speed 74,4

64
 Industrial Steel Bottle Jacks
▼ Shown: GBJ010A, GBJ030A, GBJ003A
GBJ
Series

Capacity:
2 - 100 ton
Stroke:
62 - 460 mm

Screw Extension Feature

Heat treated, adjustable extension
screw with cleated saddle on
selected GBJ models helps
adjusting and prevents slipping.

• Lower handle effort reduces operator fatigue

• Fully serviceable
• High-strength beam and pump linkage for long life Cylinder-Pump Sets
• Pumping handle included on all models As an alternative to
bottle jacks where the
• Safety relief valve to prevent overload operator is required
• Automatic by-pass port to prevent over-extension to stand remote from the jacking point, see our
range of cylinder-pump sets.
• Wiper seal for extended life
• Thick base material with large area for increased strength and
stability during lifting
Page: 60
• Positioning handle on 20 ton through 50 ton models.

Capacity Stroke Model Screw Min. Max. Plunger Saddle Bottom ▼ Enerpac heavy-duty bottle jacks make lifting
Number Extension Height Height diameter Diameter Dimensions loads easier.
WxL
ton (kN) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
2 (19,6) 460 GBJ002LA - 570 1030 29 - 75 x 116 10,3
2 (19,6) 105 GBJ002A 65 168 338 24 23,5 75 x 116 3,6
3 (29,4) 105 GBJ003A 65 168 338 24 23,5 75 x 116 3,7
5 (49,0) 150 GBJ005A 75 212 437 29 28,5 75 x 125 4,5
8 (78,4) 150 GBJ008A 75 219 444 37 38,0 90 x 144 6,2
10 (98,0) 150 GBJ010A 75 219 444 37 38,0 90 x 144 6,4
10 (98,0) 62 GBJ010SA 30 131 223 37 38,0 90 x 144 5,0
15 (147,0) 150 GBJ015A 75 228 453 45 45,0 112 x 163 8,8
20 (196,0) 150 GBJ020A 75 234 459 51 61,0 120 x 172 10,6
20 (196,0) 105 GBJ020SA 55 190 350 51 61,0 120 x 172 9,5
30 (294,0) 150 GBJ030A 75 242 467 58 69,0 144 x 196 15,5
50 (490,0) 140 GBJ050A - 260 400 80 80,0 165 x 214 27,0
100 (980,0) 150 GBJ100 - 300 450 110 94,0 296 x 333 87,0
All GBJ Jacks meet or exceed: ANSI, PALD, CE.

www.enerpac.com 65