Datasheet Eaton 93PM UPS 30-250 kVA

Eaton 93PM UPS

30-250 kVA

E f fi
lity ci
bi

la

en
Sc a

cy
LOWER
TCO
HIGHER
AVAILABILITY

Re
y

sil
et
en

i
f
Sa cy

Maximum energy efficiency.

Minimum operating costs.
Lowest total cost of ownership
• Up to 97% efficiency level in double conversion
mode -significant savings in operational costs.
• > 99% superior efficiency is delivered in
Energy Saver System mode (ESS).
• Maximal power and energy density ensures a compact footprint.

Highly scalable and reliable

• Scalable, modular architecture and ‘Pay as you grow’
capability minimises CapEx.
Key Applications • Eaton’s unique Hot Sync wireless paralleling and internal
redundancy ensures maximum availability and high reliability.
• Small, medium and large data centres
• Finance and banking critical infrastructure Easy deployment
• Commercial buildings and industrial complexes • Thermal management support allows for flexible installation
against the wall, in rows and in hot/cold aisle configurations.
• Healthcare
• Easy access allows fast MTTR (mean time to repair).
• Telecommunications installations
• Process control equipment Easy management
• Intelligent Power® software integrates with leading virtualisation
management systems for monitoring and managing.
• The intuitive touchscreen LCD user interface and visual data
logging provides clear information on the UPS status.
• Cyber-resilient (third party certified) connectivity.
Eaton 93PM UPS 30-250 kVA
Technical specifications
General Options and accessories
UPS output power rating 30-200 kW range (p.f. 1.0) Internal and external batteries or supercapacitors
60-250 kVA range (pf 0.9) Integrated battery breaker or external Battery breaker enclosures for rack batteries
Efficiency in double conversion mode Up to 97 % Integrated manual bypass switch and external wrap-around maintenance bypass
Efficiency in Energy Saver System (ESS)1 > 99% Top air exhaust kit for against-the wall or back-to-back installation
External paralleling capability Up to 8 units 30-150 kVA range: Bottom or rear cable access as standard. Top cable access with optional kit
160-250 kVA range: Bottom, rear and top cable access as standard
Inverter/rectifier topology Transformer-free 3-level IGBT-converter
30-200 kW (1.0pf) range: Separate battery per power module for battery redundancy and
Audible noise 3 0-60 kVA: <60 dBA easier scalability
80-250 kVA: <65 dBA
Sync control for synchronising the output of two separate UPS systems
ESS operation: <47 dBA
Power Conditioner mode
Operating Altitude 1000 m without de-rating. Max. 2000 m
Frequency converter mode
Input
Connectivity
Input wiring 3ph + N + PE
Native relay inputs/outputs 5 relay inputs and dedicated EPO
Nominal voltage and frequency rating 380 V; 400 V; 415 V 50Hz/60Hz 1 relay output
Input Power Factor 0.99 More relay contacts available as option.
Input ITHD 30 kW range: <5% Software E aton Intelligent Power Manager
40-250 kVA range: <3% Eaton Intelligent Power Protector
Soft start capability Yes Gigabit Network card Web/SNMP
Internal backfeed protection Yes (NETWORK-M2) Third party certified cybersecurity
Up to 3 optional sensors (EMPDT1H1C2):
Output
Temperature, humidity and two status inputs
Output wiring 3ph + N + PE
Industrial Gateway card Web/SNMP/Modbus RTU and TCP
Nominal voltage and frequency rating 380 V; 400 V; 415 V 50Hz/60Hz (INDGW-M2) Third party certified cybersecurity
Load power factor range 0.8 lagging – 0.8 leading Up to 3 optional sensors (EMPDT1H1C2):
Temperature, humidity and two status inputs
Output UTHD < 1.5%
Power Xpert UPS Minislot card Web/SNMP/Modbus RTU and TCP/BACnet IP
Battery
(PXGMSUPS) Optional Sensor (EMP001):
Battery type VRLA Temperature, humidity and two status inputs
Charging method Advanced Battery Management (ABM) or float Industrial Relay-MS card 5 relay outputs / 1 relay input
Temperature compensated charging Option (INDRELAY-MS)

Battery start capability Yes Compliance with standarts

Alternative backup power technologies Wet cell batteries Safety IEC 62040-1; CB certified
NiCd batteries EMC IEC 62040-2
Li-Ion batteries
Performance IEC 62040-3
Supercapacitors
RoHS EU directive 2011/65/EU
1. Additional information on ESS performance, refer to 93PM UPS Technical Specification.
WEEE EU directive 2012/19/EU

Due to continuous product imrovement programmes, specifications are subject to change without notice.

Eaton 93PM 30-250 kVA range

93PM Frame Available Ratings Rated output p.f. Internal battery Dimensions (WxDxH) Weight
93PM-50 30 kW, 40 kW, 50 kW 1 10-30 min full load runtime 560 x 914 x 1876 870 kg
93PM-60 60 kVA 0.9 10 min full load runtime 560 x 914 x 1876 870 kg
40 kW, 50 kW; scalable to 100 kW 267 kg
93PM-100 40+40 kW, 50+50 kW; N+1 Internal redundancy 1.0 560 x 914 x 1876 338 kg
80 kW, 100 kW 338 kg
60 kVA; scalable to 120 kVA 267 kg
93PM-120 60+60 kVA; N+1 internal redundancy 0.9 560 x 914 x 1876 338 kg
120 kVA 338 kg
40 kW, 50 kW; scalable to 150 kW 279 kg
80 kW, 100 kW; scalable to 150 kW 341 kg
93PM-150 1.0 560 x 914 x 1876
80+40 kW, 100+50 kW; N+1 internal redundancy 438 kg
120 kW, 150 kW 438 kg
40 kW, 50 kW; scalable to 200 kW 346 kg
80 kW, 100 kW; scalable to 200 kW 408 kg
93PM-200 120 kW, 150 kW; scalable to 200 kW 1.0 760 x 914 x 1876 471 kg
120+40 kW, 150+50 kW; N+1 internal redundancy 556 kg
160 kW, 200 kW 556 kg
60 kVA, 120 kVA, 180 kVA; scalable to 250 kVA 346 kg - 471 kg
93PM-250 120+60 kVA, 180+60 kVA; N+1 internal redundancy 0.9 760 x 914 x 1876 471 kg - 556 kg
250 kVA 556 kg

© 2022 Eaton Eaton is a registered

All Rights Reserved trademark of Eaton.
93PM01DAT Rev H,
Publication No. PS153029EN All other trademarks are property
December 2022 www.eaton.com/eaton93pm of their respective owners.