LL7835A
Metallocene Linear Low Density Polyethylene Resin
Special Characteristics : InnoPlus LL7835A is a metallocene polyethylene with hexene comonomers, without slip and
U
antiblock. This grade is a high performance grade which offer an outstanding mechanical properties and down-gauging.
Films extruded from InnoPlus LL7835A have an excellent tensile and dart impact strength properties. It is suitable for both
LT
cast mono / multilayer and blown film.
R
Typical Applications : InnoPlus LL7835A is recommended for producing the heavy duty films, cast stretch films, liners
A
Typical Properties :
PO
Properties LL7835A Unit Test Method
Physical Properties Cast film* Blown film**
LY
Melt Index (190 oC, 2.16 kg) 3.5 3.5 g/10 min ASTM D1238
M
Density 0.920 0.920 g/cm 3
ASTM D792
Melting Point 118 118 o
C ASTM D3418
ER
Vicat Softening Point 105 105 o
C ASTM D1525
Film Properties
C
Tensile Strength at Break (MD/TD) 61 / 43 45 / 40 MPa ASTM D882
O
Elongation at Break (MD/TD) 610 / 630 850 / 900 % ASTM D882
R
Tensile Modulus, 1% Secant (MD/TD) 185 / 200 230 / 250 MPa ASTM D882
PO
Dart Impact Strength 200 140 g ASTM D1709
Tear Strength (MD/TD) 210 / 400 300 / 400 g ASTM D1922
R
Haze 3.9 19 % ASTM D1003
A
Gloss (45o) 81 27 - ASTM D2457
TI
* Film made on cast film line. Film properties obtained from 25 microns film.
O
** Film made on blown film line at blow up ratio 2.5. Gloss (45o) obtained from 40 microns film while other film properties obtained from 25
N
microns film.
Processing Condition :
C
The recommended temperature setting is in the range of 160 - 180 oC for extruder and 170 - 190 oC for die zone.
O
FDA Statement :
.,
mLLDPE under the brand InnoPlus complies with U.S. FDA 21 CFR 177.1520 ( c ) (2.1) and (2.2) regulation for polyethylene
used in articles that contact food suitable for articles used for packaging or holding food during cooking.
LT
Disclaimer :
D
This Applications specified herein is for reference only and not suitable for using in the manufacturing of any products in medical and pharmaceutical sectors.
• Determination of suitability of the product for the use and purpose shall be the customer’s responsibility. Customer is obligated to inspect and test the product for such suitability.
.
Customer is responsible for appropriate, safe, legal use processing and handling of the product.
• To our best knowledge, information contained herein is true and accurate as of the date of its publication. However, we make no representations or warranties with respect to accuracy,
reliability and completeness of the information contained herein for any purpose.
• No warranties, express or implied, which extend beyond the description herein are given by us. Nothing herein shall constitute any implied warranty of merchantability or fitness for
a particular purpose.
• We assume no liability for any use of the product in combination with other materials. The information contained herein entirely relates to the product when it is not used in combination with
any third party’s materials.
Note : Properties reported here are typical values of the product, not to be considered as specifications.
PTT Global Chemical makes no representations as to the accuracy or completeness of the information contained herein.
GC Marketing Solutions Company Limited
Energy Complex Building A, 9th Floor, 555/1 Vibhavadi Rangsit Road, Chatuchak, Bangkok 10900 Tel: 66 2140 4488 Fax: 66 2140 4333 Revised Date : Oct, 2021
