Programmable transmitter

5114A
– Input for RTD, TC, mV, linear resistance, mA, and V
– 3-port 3.75 kVAC galvanic isolation
– Current and voltage output
– Universal voltage supply
– 1- and 2-channel versions
– Loop supply > 17.1 V

Advanced features
Applications
• The 5114 transmitter can be configured using the PReset
software and the Loop Link communications unit.

Application
• Jumper selectable inputs for current/voltage or temperature.
• Programmable current (0...100 mA) and voltage (0...250
VDC) inputs.
• Linearized, electronic temperature measurement.
• Conversion of linear resistance variation e.g, from solenoids
and butterfly valves or linear movements with attached
potentiometer.
• 17.1 VDC loop and 2.5 VDC potentiometer supplies.
• Automatic 4- / 3-wire or programmable 2-wire cable
compensation.
• Configurable sensor error detection including NAMUR NE43.

Technical characteristics
• Active or Passive current output and selectable voltage
output.
• Separation of circuits in PELV/SELV installations.

This page is automatically generated on the basis of information provided on www.prelectronics.com and affiliated websites. It is provided to you as a service and for information
purpose only. While we have attempted to maintain the information as accurately as possible, the page may contain errors or omissions for which we disclaim any and all liability
Environmental Conditions Current input
Measurement range....................................... 0...100 mA
Operating temperature................................... -20°C to +60°C
Min. measurement range (span).................... 4 mA
Calibration temperature................................. 20...28°C
Input resistance: Supplied
Relative humidity............................................ < 95% RH (non-cond.) unit................................................................. Nom. 10 Ω + PTC 10 Ω
Protection degree........................................... IP20 Input resistance: Non-supplied
unit................................................................. RSHUNT = ∞, VDROP < 6 V
Mechanical specifications
Voltage input
Dimensions (HxWxD)..................................... 109 x 23.5 x 130 mm
Measurement range....................................... 0...250 VDC
Weight approx................................................ 225 g
Measurement range....................................... -150...+150 mV
DIN rail type................................................... DIN 46277
Min. measurement range (span).................... 5 mV
Wire size........................................................ 1 x 2.5 mm2 stranded wire
Input resistance.............................................. Nom. 10 MΩ (≤ 2.5 VDC)
Screw terminal torque.................................... 0.5 Nm
Input resistance.............................................. Nom. 5 MΩ (> 2.5 VDC)
Input resistance.............................................. Nom. 10 MΩ (mV input)
Common specifications
Supply Output specifications
Supply voltage, universal............................... 21.6...253 VAC, 50...60 Hz or
19.2...300 VDC Current output
Fuse............................................................... 400 mA SB / 250 VAC Signal range................................................... 0...20 mA
Max. required power...................................... 2.1 W / 2.8 W (1 / 2 ch.) Min. signal range............................................ 10 mA
Load (@ current output)................................. ≤ 600 Ω
Isolation voltage Load stability.................................................. ≤ 0.01% of span / 100 Ω
Isolation voltage, test / Current limit.................................................... ≤ 28 mA
working........................................................... 3.75 kVAC / 250 VAC Sensor error indication................................... Programmable 0...23 mA
PELV/SELV.................................................... IEC 61140 NAMUR NE43 Upscale/Downscale............... 23 mA / 3.5 mA
Response time Passive 2-wire mA output
Temperature input, programmable Signal range................................................... 4...20 mA
(0...90%, 100...10%)...................................... 400 ms...60 s Load stability.................................................. ≤ 0.01% of span / 100 Ω
mA / V input (programmable)......................... 250 ms...60 s Max. external 2-wire supply........................... 29 VDC
Effect of external 2-wire
Auxiliary supplies supply voltage variation................................. < 0.005% of span / V
2-wire supply (pin 44...42
and 54...52).................................................... 28...17.1 VDC / 0...20 mA Voltage output
Programming................................................. Loop Link Signal range................................................... 0...10 VDC
Signal / noise ratio......................................... Min. 60 dB (0...100 kHz) Min. signal range............................................ 500 mV
Accuracy........................................................ Better than 0.05% of selected Load (@ voltage output)................................ ≥ 500 kΩ
range of span........................................................... = of the presently selected
Updating time................................................. 115 ms (temperature input) range
Updating time................................................. 75 ms (mA / V / mV input)
Signal dynamics, input................................... 22 bit Observed authority requirements
Signal dynamics, output................................. 16 bit
EMC............................................................... 2014/30/EU
Auxiliary voltages: Reference
voltage............................................................ 2.5 VDC ±0.5% / 15 mA LVD................................................................ 2014/35/EU
EMC immunity influence................................ < ±0.5% of span RoHS.............................................................. 2011/65/EU
Extended EMC immunity: NAMUR EAC................................................................ TR-CU 020/2011
NE21, A criterion, burst.................................. < ±1% of span
Approvals
Input specifications DNV Marine.................................................... TAA0000101
Common input specifications
Max. offset...................................................... 50% of selected max. value

RTD input
RTD type........................................................ Pt100, Ni100, lin. R
Cable resistance per wire.............................. 10 Ω (max.)
Sensor current............................................... Nom. 0.2 mA
Effect of sensor cable resistance
(3-/4-wire)....................................................... < 0.002 Ω / Ω
Sensor error detection................................... Yes

TC input
Thermocouple type........................................ B, E, J, K, L, N, R, S, T, U,
W3, W5, LR
5114A-101321

Cold junction compensation