Solid Titanium Tube Bundles
66" Diameter and 240" Long.
TITAN Metal Fabricators designs and fabricates highly corrosion resistant equipment
for the chemical, petrochemical and pharmaceutical industries. Our expertise lies in
our reputation and proven ability to design and fabricate cost effective heat
exchangers using the reactive metals tantalum, zirconium, niobium, titanium and the
high nickel alloys such as Hastelloy heat exchangers. Tantalum heat exchangers,
zirconium heat exchanger and titanium heat exchangers made from these metals
can be used with extremely corrosive fluids and last for decades if designed and
fabricated correctly. You need the confidence that your heat exchanger is not going
to have problems. We have the experience to make sure everything comes together
— budget, design, fabrication and schedule — to yield the most trouble-free
installation possible.
66" O.D. C-276 Hastelloy Heat Exchanger Loaded for Shipping.
Our heat exchanger product line includes many
variations of the shell and tube family and all
TEMA designs as follows:
42" O.D. x 24' Length Titanium Heat Exchanger
• Fixed Tubesheet
• U-bundle • Falling Film
• Packed Heat, Absorbers
Floating • Bayonet
Tubesheet • Helical Coil
• Kettle Reboilers • Immersion Coil
• Falling Film • Double Pipe
Evaporators
Titanium Heat Exchanger with Solid Titanium Heads
Ready to be Shipped Out.
a
p
a
c
i
t
i
e
s
: Diameter 8 feet
Length 50 feet
Weight 50 tons
Pressure 2000 PSI
Titanium Heat Exchanger U Tube Style
Temperature 700º F
with Solid Titanium Tubesheets
and Titanium Shell.
D
e
s
i
g
n
c
o
d
e
s
a
n
d
Tubesheet That is Tantalum Lined
Tantalum Bayonet Heat Exchanger Manufactured for Heat Exchanger Use
The reactive metals have unique properties which affect heat exchanger design. Our Project
Management staff analyzes all of these issues on every project. We have experience in all
of these critical areas:
• Material Selection • Explosion Clad Design
• Corrosion Allowance • Loose Lined vs. Clad Tubesheets
• Thin Wall Tubing • Expansion Joint Selection
• Vibration Analysis • NDT Procedures
• Tube Expansion • Helium Mass Spectrometer Procedures
• Hydrogen Embrittlement Protection • Welding and Purge Procedures
• Nozzle Design • Heat Treat Requirements
Titanium Reboiler with Custom Titanium Piping. Hastelloy Clad Tubesheet for
Chemical Processing
TITAN Metal Fabricators’ dedication to only the reactive metals has led us
to become experts in heat exchanger applications for the following
chemical and pharmaceutical processes:
•Acetic Acid •Multi-Purpose Pharmaceutical Plants
•Agricultural Chemicals •Polycarbonate Production
•Ammonium Nitrate •Nitric Acid Silicone Production
•Bromine •Sulfuric Acid Concentration
•Chlorine •Purified Terephthalic Acid
•Formic Acid •Vinyl Chloride Monomer
•Hydrochloric Acid
www.titanmf.com/
products/chemical/
chemical.htm
Before - 82% Blockage at 70 Hours After one Application of Clear Flush
of Operation and 150 Additional Hours of
Operation
The pictures show the heat exchanger before and after use of a
SuperFlush* system. The blockage became so bad that it would overheat in
normal use so you can only imagine the lost fuel before the SuperFlush was
installed. After the installation (and 1 time chemical treatment with
FlushClear) a simple 4-minute rinse (without running the engine) after each
use maintained it in the original design condition shown in the picture to the
right.
SuperFlush
The Ultimate Weapon Against Saltwater Corrosion
