Scribd
Upload
43 views1 page

I.1.12 BallVlv-1000WOG-SS316-3Way-BSPT - Continuous-1

The document describes the materials and specifications for a ball valve. The ball valve body and end caps are made of SUS 316 investment castings. It uses an RPTFE ball and seat with a SUS 316 stem. The valve has ISO 5211 mounting, blow-out proof stem design, and double stem sealing to meet TA-LUFT standards. It has a working pressure of 1000 psig at 100°F and operates from -50°F to 350°F.

Uploaded by

Mochamad Rizal Armajaya Yudha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views1 page

I.1.12 BallVlv-1000WOG-SS316-3Way-BSPT - Continuous-1

The document describes the materials and specifications for a ball valve. The ball valve body and end caps are made of SUS 316 investment castings. It uses an RPTFE ball and seat with a SUS 316 stem. The valve has ISO 5211 mounting, blow-out proof stem design, and double stem sealing to meet TA-LUFT standards. It has a working pressure of 1000 psig at 100°F and operates from -50°F to 350°F.

Uploaded by

Mochamad Rizal Armajaya Yudha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Ball Valve

Materials
No. Part Material Features
1 Body SUS 316 • Investment Castings for Body and End caps
2 End Cap SUS 316 • Various Thread Standards are Available
3 Ball RPTFE • Built-in ISO 5211 Mounting Pad for Easy Automation
• Anti-static Devices for Ball-stem-body
4 Ball Seat RPTFE
• Blow-out Proof Stem
5 Stem SUS 316
• Double Stem Sealing to Comply with TA-LUFT Requirements
6 Anti-Static SUS 316
• Positive Position Location at 90° Increments
7 Stem Seat-Ring PTFE
8 V-ring Packing PTFE
Standards
9 Bushing 50%SS + 50% PTFE
• Design: ASME B16.34, API 608
10 Gland SUS 304
• Wall Thickness: ASME B1.20.1, BS21
11 Belleville Washer SUS 304 DIN 2999/259, BSPT
12 Stem Nut SUS 304 • Pipe Thread: ASME B.201, BSPT
13 Stop-Lock-Cap SUS 304 DIN 2999/259, BSPT
14 Washer SUS 304 • Inspection and Testing: API 598
15 Handle Nut SUS 304
16 Handle Sleeve Vinyl Plastic Specification
17 Handle SUS 304 • Working Pressure: 1000 psig at 100°F (38°C)
18 Lock Device SUS 304 • Temperature Range: -50°F to 350°F (-46°C to 177°C)
19 Handle Gland SUS 304
20 Body Gasket PTFE
21 Stop Bolt SUS 304

Dimensions (mm)
Size ØDN Ød L H H1 W ØB1 ØB2 ØA1 ØA2 P Weight
¼” 8 11.0 79.0 42.0 70.0 160.0 42.0 36.0 5.5 5.5 9.0 0.70
⅜” 10 11.0 79.0 42.0 70.0 160.0 42.0 36.0 5.5 5.5 9.0 0.80
½” 15 11.0 76.0 42.0 70.0 160.0 42.0 36.0 5.5 5.5 9.0 0.65
¾” 20 15.0 86.0 49.0 77.0 160.0 42.0 36.0 5.5 5.5 9.0 1.00
1” 25 20.0 100.0 59.0 87.0 175.0 50.0 42.0 5.5 5.5 11.0 1.60
1¼” 32 25.0 124.0 65.0 93.0 175.0 50.0 42.0 5.5 5.5 11.0 2.40
1½” 40 32.0 126.0 73.2 103.0 245.0 70.0 50.0 8.5 6.5 14.0 3.50
2” 50 40.0 146.0 82.5 113.0 245.0 70.0 50.0 8.5 6.5 14.0 4.85

All information in this brochures was correct to the best of our knowledge when originally printed. ARITA reserves the right to make
change without notice to product specifications and manufacture processes given the company’s policy of continual product improvement.

I.1.12

You might also like