HEARING AID

1300 736 330 Instruction Manual Model: JH-908

www.medescan.com.au
Visit our YouTube channel for our latest easy to follow
instructional videos. Simply search for Medescan on YouTube
and subscribe to our channel for the latest products and
instruction videos.
You can also scan the QR code for instant access.

Life cycle of product is three years

1639
VER: 909G-20220120-V01

Please read this user manual thoroughly and

Designed in Australia completely before using the product.
Made in China
 7.HOW TO USE THE CHARGING CASE 16
CONTENTS 8.CLEANING 19
I.IMPORTANT SAFETY INSTRUCTIONS
V. MAINTENANCE AND CLEAN 21
1.CONTRAINDICATION
VII.HEARING AID CARE 22
2.WARNINGS
VII.TROUBLESHOOTING GUIDE 24
3.NOTICE 03
VIII.TIPS FOR BETTER COMMUNICATIO 27
II.DO NOT USE IF ANY OF THE FOLLOWING APPLY TO YOU 06 IX.TECHNICAL SPECIFICATION
III.MATTERS NEEDING ATTENTION, WARNINGS AND TIPS 07 X. ACCESSORIES LIST 29
IV.HOW TO USE YOUR DEVICE 08 XI.NORMALIZED SYMBOLS 30
1.QUICK GUIDE 09 XII.MAINTENANCE, STORAGE, AND DISPOSAL 31
2.HOW TO APPLY DOMES 10 XIII.WARRANTY 32
3.WEARING/REMOVE HEARING AID 11
4.TURN ON/TURN OFF 12
5.VOLUME ADJUSTMENT 13
6.HEARING AID CHARGING 15

-1- -2-
I.IMPORTANT SAFETY INSTRUCTIONS - Routine maintenance to keep the device clean is required.
Read all the information in this instruction manual and any other Ensure that ear domes are free of debris and moisture at all times.
literature included in the box before using the device. - Avoid shocks or dropping the product.
1. CONTRAINDICATION - Do not store or use the product in environments of high humidity
The device should not be used in the following situations: or temperature (such as sauna room), to avoid damage.
- Patients with chronic suppurative otitis media (CSOM),congenital - Batteries should be properly recycled and not disposed in the
ear atresia, or any type of ear discharge trash.
- Anyone under 36 months old - Keep the devices away from small children. Injury or damage may
result.
2. WARNINGS Warning - Do not set volume levels too high. Listening with high-output
- Keep small parts (hearing instrument, ear domes, battery or other devices for extended periods at high volume levels can cause
detachable parts) that can be swallowed out of children’s reach. further hearing damage.
Dropping, immersing in liquid, exposure to strong electromagnetic - Do not share your hearing aids with others. Using a hearing aid
fields or excessive heat will damage the hearing aids. Remove configured for someone else can result in hearing damage or injury.
devices prior to any type of X-ray, MRI, or CT scan. If parts become - Monitor for any unusual skin reaction. If you notice any allergic
stuck in the ear canal, seek medical assistance - do not attempt to reaction (itchiness, swelling, or rash), stop wearing the hearing
remove by yourself. aids and consult a medical specialist.
- Do not touch the hearing aids to any type magnet or magnetized
3. Notice Warning object. Your hearing aids are delicate electronic instruments and
- Do not use at high volume for extended periods of time - ear injury may be damaged by contact with strong magnetic fields.
can result. - Do not attempt to open or repair the devices yourself. Damage
- If you experience any pain or strong discomfort using the devices, can result and will void the warranty.
remove and consult a doctor. - Do not store your devices in a hot/humid locations. You should
-3- -4-
never leave your hearing aids near heating appliances or in direct II. DO NOT USE IF ANY OF THE FOLLOWING APPLY
sunlight. TO YOU:
- Do not leave your hearing aids in the car as inside temperatures 1) Congenital atresia of external ear or deformity of any part of the
can reach dangerous levels which could damage the devices. ear canal
- Do not use the hearing aids together with a cell phone earpiece 2) Deafness is unstable, and the degree of hearing loss often
directly - excessive noise and distortion may result. Instead, use fluctuates
via Bluetooth pairing with your cell phone. Radio wave emissions 3) Persistent headaches, dizziness, earaches, tinnitus or other
from mobile phones can cause noise in the hearing aids or result in symptoms that are not suitable for adaptation
reduced volume. 4) Sudden onset of hearing loss within the past 3 months; rapid
- Please contact the MANUFACTURER: progressive deafness; unilateral hearing loss or other acute ear
• For assistance, if needed, in setting up, using or maintaining disease;
your devices or 5) Effusion (secretions/discharge) in the ear and/or frequent
• To report any unexpected operation or events purulence (pus)
6) Central deafness (central nervous system) or non-organic
Specific warnings / statements deafness
Keep small parts away from and out of children´s reach to avoid 7) Patients with acute otitis externa and tympanitis
accidental ingestion 8) Patients with acute and chronic suppurative otitis media (in the
Warning not to use in explosive or oxygen-enriched atmospheres, as period of purulent infection)
doing so may damage the device 9) Patients who are allergic to the materials of this product
Warning that it should only be used by intended person as using
hearing aids designed for someone else may result in hearing
damage

-5- -6-
III. Matters needing attention, warnings and tips IV.HOW TO USE YOUR DEVICE
1. Do not immerse the hearing aid in any liquid. Remove the
hearing aid before swimming or bathing. After swimming or
washing, wait for the ear canal to dry before wearing the hearing
aid. 3
2. After removing the hearing aid at night, it should be placed in a
1 4
case with a desiccant if possible, protected from light, high
temperature and high humidity environment. 2
3. The external surfaces of the hearing aid should be kept clean,
and earwax in the ear domes should be cleaned out daily
4. Applicable objects: Suitable for people with air-conducting
1. Microphone
hearing loss of about 30-50dB
2. Multi-function Button
5. When you do not use hearing aids, please charge the product
(ON/OFF, Volume Control)
regularly to avoid battery damage; the recommended charging
3. Ear Dome
time interval of hearing aids is ≤28 days
4. Charging Contacts

-7- -8-
1.【QUICK GUIDE】 2.【HOW TO APPLY DOMES】
1.Charging your hearing aids Please follow these steps to mount domes, because Incorrect
* Before using your hearing aid for the first time, it is recommended dome replacement could result in the dome being left in the ear
to charging when it light in green and the green light turn off when you remove the hearing aid.
indicates charging is complete.
Step 1: Choose a suitable size ear dome.

L M S

2.Turn ON/OFF Step 2: Hold on to the end of the hearing aid and push firmly to
Long press the “Multi-function button” for three (3) seconds to Turn ensure that the dome is fastened securely.
it ON/OFF
3.Volume Adjustment 1 2
Short press “Multi-function button” to increase or decrease the
volume

Notes:
Multi-function Button After the ear dome is installed, pull the ear dome gently to see if it
(ON/OFF,Volume Control) is firmly installed and ensure the ear dome does not fall off easily.

-9- -10-
3.【WEARING/REMOVE HEARING AID】 *Note:
Notes: For comfort, always turn off your hearing aids before you 1.It may be in few circumstances that the ear dome remain
wear or remove them. attached to the auditory meatus after the hearing aid is taken out.
In that case, please ask a professional doctor to take the ear dome
3.1 Wearing hearing aid out.
Step 1: Hold the hearing aid body (hard part), place in the ear 2. Before the hearing aid is appropriately secured, it may give out
(Make sure it is in right direction like picture). the creak sound, which is a normal phenomenon. The creak sound
Step 2: Move the body slightly into auricle for holding. can be used as a reference to determine whether the hearing aid is
secured. If the hearing aid gives out squeaking, please check if it is
1 2 taken on correctly; if so, but the squeaking remains, please replace
with the other set of ear dome. When the hearing aid is not in use,
please turn it off without delay.
3. When the hearing aid is not functioning properly, please check
the “Troubleshooting Guide”. If none of the solutions work, please
contact our after-sales service team.
3.2 Removing the hearing aid
Step 1: Grasp the protruding hearing aid and remove it.
4.【TURN ON/TURN OFF】
Turn On: Long press the “Multi-function button” for three (3)
seconds and the hearing aid will be power ON with the prompt tone
of " Beep ".
Turn Off: Long press the “Multi-function button” for three (3)
seconds and the hearing aid will be power OFF with the prompt
tone of " Beep ".

-11- -12-
 1
Multi-function button
(ON/OFF,Volume Control)
4
2 5 6
5.【VOLUME ADJUSTMENT】
The hearing aid has 6 volume levels. 3
5.1 Short press “Multi-function button” to increase or decrease the
volume.(Short Press once)

5.2 When the volume is the highest, one additional pressing on the
Micro USB Cable
key will reset the volume to the lowest level, so on and so forth. The
hearing aid can automatically record the previously tuned volume
level.
1. Lip
Note: You will hear a "Beep" when you turn the volume up or down.,
2. Hearing aid charging indicator
and when the volume is adjusted to highest level, it will give out the
3. Charging case charging indicator
prompt tone of "Beep-Beep".
4. Hearing aid charging contacts pin
The hearing aid can’t automatically record the previously tuned
5. Hearing aid charging insert
volume level when the hearing aid is Low Power.
6. Micro USB connection to external power supply

-13- -14-
6.【HEARING AID CHARGING】 7.【HOW TO USE THE CHARGING CASE】
Hearing aid charging: 7.1. Please make sure that the hearing aid is in power-off state
Put the hearing aid back into the correct slot of the charging case, when charging. Plug the small Micro-USB cable tip into the USB
they will automatically charging . (Please make sure that the charging port of the Case. Plug the large USB-A end into a USB-A
hearing aid is in turn-off state when charging.) Orange light will power source such as a wall charger or your computer, close the lid
indicate hearing aids are charging. After fully charged, they will and place it steadily.
light in green and the green light turn off indicates charging is
complete.
(See details in table for Charging Indicator Changes of the
Charging Case)

7.2 The indicator light will show the charging status of the battery
Correct Wrong until the hearing aid is fully charged. When the case is charging,
the indicator shows a orange solid light, and fully charged the
indicator light will shows a solid green light will be constant and the
light turning off indicates charging is complete.

Charging Fully Charged

-15- -16-
7.3 With the hearing aids in the case, all charging will automatically Flashing Solid Orange Light
turn off when the case and hearing aids are fully charged. The case
Solid Green Light
will continue charging with or without the case lid closed but it is
recommended to close the lid when charging overnight to keep out Hearing aid Charging
Charging state charging indicator of
dust and moisture. indicator the charging case
Hearing aid 100%
Charging
(Charging 10-99%
Case is not
charging) 0-10%
Charging 100%
Case
Charging Fully Charged Charging 0-99% Flash

Charging Indicator Changes of the Charging Case

7.4 The charging process will automatically stop when the case *Note:
and hearing aids are fully charged, so the hearing aids can be 1.Charging Case Low Power: The charging case indicator will
safely left in the charger. Place it on a flat even surface away from change orange when the charging case battery drops below 10%,
exposure to moisture, dust, or extreme temperatures. please charge the case.
*Note: The fully charged case offers 3 full charging cycles for a pair 2.When the case is fully charged, the indicator will show a solid
of hearing aids. green light will be constant and the light turn off indicates charging
is complete.
3.When the hearing aid and case is not functioning properly, please
check the “ Troubleshooting Guide”. If none of the solutions work,
please contact our after-sales service team.

-17- -18-
8.【CLEANING】 8.3 Daily maintenance
8.1 Cleaning the ear domes It is important to keep your devices clean and dry. On a daily basis,
Remove any earwax buildup using the enclosed tool . Wipe clean wipe them clean using a soft cloth or tissue. To avoid potential
with a tissue or soft cloth. damage from excess humidity or perspiration, the use of a drying
8.2 Cleaning Tool: kit is also recommended.
Use a soft cloth or tissue to wipe any moisture, perspiration, or
debris from the surface of the tool.

1 2

All data in this manual, such as service time, charging time,

continuous working time, and charging times are derived from our
internal laboratory testing and meant for reference purposes only.
3 Your exact usage and times may differ depending on various
conditions and use patterns. It is a normal phenomenon to hear
some high-pitched whistling or buzzing when the hearing aid is at
a high volume level and not fitted well into the ear as a result of
mic feedback. If this occurs, lower the volume and adjust the
hearing aid within the ear. Also check to make sure you are
wearing the best size ear domes to ensure a proper fit in the ear
canal, as this may also induce some minor feedback if not snug in
the ear.

-19- -20-
V. MAINTENANCE AND CLEANING Note: Do not use alcohol or other cleaning solvents to clean the
1. Daily maintenance hook as this could damage the protective covering.
It is important to keep your devices clean and dry. On a daily
basis, wipe them clean using a soft cloth or tissue. To avoid VI. HEARING AIDS CARE
potential damage from excess humidity or perspiration, the use
of a drying kit is also recommended. - Keep your hearing aids clean. Extreme temperatures (heat or
2. Care and maintenance cold), moisture, and foreign substances can result in poor perfor-
When not in use, store in a secure area away from small children mance.
and pets. - Use the cleaning brush tool or soft cloth to clean debris from
Do not place hearing aids or charging case near high-temperature around the buttons, microphones, and charging contacts; inspect
areas such as stoves or direct sunlight. the receiver, ear tips, and charging case regularly.
Do not leave the devices in a humid place for a long time, such as - Never use water, solvents, cleaning fluids or oils to clean your
bathroom. hearing aids.
Take care not to poke the microphone holes with any sharp objects - Charging contacts should always be kept clean and dry.
to avoid damage. - Always store your hearing aids in the charging case when not in
Do not disassemble or attempt any repairs by yourself. Doing so use or cleaning.
will void your warranty.
3. Cleaning Charging Case Care
1) Cleaning the ear tips
Remove any earwax buildup using the - Keep your charger clean. Heat, moisture and foreign materials
enclosed tool. Wipe clean with a tissue or soft cloth. can result in poor performance.
2) Cleaning Tool - Using the provided cleaning brush keep the charging ports clear
Use a soft cloth or tissue to wipe any moisture, perspiration, of debris.
or debris from the surface of the tool. - Do not use water, solvents or cleaning fluids to clean the charging
ports.

-21- -22-
- Keep lid closed as much as possible to avoid dust and debris VII.TROUBLESHOOTING GUIDE
build up. SYMPTOM POSSIBLE CAUSES SOLUTIONS
- Store your charger in a clean and dry location, i.e. a dresser or Device is not charged Place charging the hearing aid
shelf rather than the bathroom or kitchen. until the indicator is lighted in
- To ensure the longest life of your rechargeable hearing aids green color.
batteries and the batteries in the charger: No Sound
Microphones are clogged Clean out any debris from the
- Fully charge hearing aids batteries every night. mic holes
Ear Domes or speaker tip Clean out any debris from the ear
are clogged domes and receiver area with the
cleaning brush
Low battery Place the aids into the Charging
Service and Repair Case for at least 1.5 hours

If, for any reason, your hearing aids and charger do not operate Volume is set too low Increase the Multi-function button
available
properly, do NOT attempt to fix it yourself. Besides possibly
causing further damage, you are likely to violate any applicable Voices are low, Ear Domes are too loose Hearing aid not inserted correctly
warranties or insurance. Should your hearing aids and charger fail very weak, into ear , wear it correctly
or unclear
or perform poorly, check the Troubleshooting Guide section for Earwax in ear dome Clean out any debris from the ear
possible solutions. If problems persist, contact us for assistance. domes and receiver area with the
cleaning brush
Hearing has changed Contact your physician to report
any sudden drop in hearing
Inconsistent Restart required Place aids in charger until
performance charging begins and remove-this
Distorted sound will power cycle your hearing aids

-23- -24-
 Incorrect orientation Ensure the USB cable is connected Low battery Connect the hearing aid to the
to the Charging Case plugged into charging case for charging
power. The Case power status
lights will flash orange to indicate The voice is very Volume is set too low Connect the hearing aid to the
Hearing aids
charging. weak and unclear charging case for charging
whistling in the
charger Charger battery depleted Reposition your hearing aids in their
Ear Domes are too loose Clean the sound port or
slots, ensuring the contact points
microphone port
are touching the charge points in
the case.
Hearing aid plays Indication for low battery Charge hearing aid
notification sound
Poor contact between Reinsert the hearing aid into the
After the hearing hearing aid and charging Hearing aid not inserted Insert hearing aid correctly into
charging case
aid is connected, case correctly into charger charger
Indicator light on
the hearing aid Hearing aid reverse Check to see if the hearing aid is hearing aid does
indicator is not lit reversed Charger not connected to Connect charger to external power
not light up when
hearing aid placed power source supply
in charging inserts Wait three hours after placing
Battery fully discharged
[Fault self-check] Possible Causes Solution hearing aid in charger, regardless
of LED behavior
project
Hearing aid failure self-checking table
The button time is too Long press the "Multi-function
short to start button" for 3 seconds, restart
[Fault self-check] Possible Causes Solution
Battery fully discharged Connect the hearing aid to the project
Hearing aid has
no sound charging case for charging Poor contact between Reinsert the hearing aid into the
After the hearing hearing aid and charging
Plugging out the mouth Clean the sound port or charging case
aid is connected, case
or microphone microphone port the hearing aid Hearing aid reverse Check to see if the hearing aid
indicator is not lit is reversed

-25- -26-
 Low battery Connect USB cable to charge - Try out different locations to find the optimal places to listen
Hearing aid - Minimize distractions
indicator lights
Dirty charging contacts Clean the contacts of the hearing
- Background noises may be frustrating at first; remember, you
are dark or dim
aid and the charger have not heard them for a while
- Let others know what you need; keep in mind that people
Charging does Hearing aid not inserted Insert hearing aid correctly into cannot “see” your hearing loss
not start correctly into charger charger - Develop realistic expectations of what your hearing aids can
and cannot do
Charging case fault self-checking table
- Better hearing with hearing aids is a learned skill combining
*Note: If the problem persists, contact your hearing care professional for desire, practice, and patience. You will learn and adjust, it just
assistance. takes a little time. Remember to be patient with yourself.

For Your Family and Friends

VIII.TIPS FOR BETTER COMMUNICATION Your family and friends are also affected by your hearing loss.

It will take practice, time, and patience for your brain to adapt to Request that they:
the new sounds that your hearing aids provide. Hearing is only - Get your full attention before beginning to speak
part of how we share thoughts, ideas and feelings. Reading lips, - Look at you or sit face-to-face
facial expressions, and gestures can help the learning process - Speak clearly and at a normal rate and level; shouting can
and add to what amplification alone may miss. actually make understanding more difficult
- Rephrase rather than repeat the same words; different words
Please review the following simple communication tips: may be easier to understand
- Minimize distractions while speaking
For You
- Move closer to and look at the speaker
- Sit face-to-face in a quiet room if possible

-27- -28-
IX.TECHNICAL SPECIFICATION Notes:
The device fulfills the provisions of the EC directive 93/42/EEC (Medi-
Model JH-908
cal Device Directive) and the Harmonize Standard as IEC 60601-1,
Output. OSPL90 Max ≤120dB+3dB IEC 60601-2-66, IEC 60118-7, IEC 60118-13, EN ISO 10993-1/-5/-10,
Sound Gain (FOG) ≤40dB+5dB EN ISO 14971, and FCC CFR 47 Part 15, Subpart B, Class B
EQ Input Noise ≤35dB XI. NORMALIZED SYMBOLS
Total Harmonic Distortion ≤10% Follow operating instructions
Frequency Range F1<350Hz,F2>3000Hz B type applied part
Working Current ≤3.5mA Disposal in accordance with Directive 2002/96/EC (WEEE)
Working Voltage d.c.3.7V CE Labeling
*Notice: The above parameter index testing is on basis of FONIX8000Hearing Aid Test This product satisfies the requirements of the applicable
System;Inspection standard: IEC 60118-7 2005, 2CC coupling cavity HA-1 European andnational directives

Manufacturer information
Item Charging Case
Date of manufacture
Charging case input voltage d.c.5.0V
Serial number
Charging case output voltage d.c.3.7V
Warning/ Danger: Improper use might cause serious injuries.
Charging case input current 20mA
Charging case output current 10mA IP code of the device: this device’s grade of against ingress of
solid foreign objects – the access probe of ≥ Ø 12.5mm shall not
Hearing aid charging voltage d.c.4.2V IP21 penetrate; the grade of waterproof is vertically falling drops shall
have no harmful effects.
X.Accessories List
Hearing aid: 1 Charging Case: 1 * Optional accessories list: Permissible storage and transport temperature and humidity
Ear Domes: 3 Manual: 1 Adapter：1
Input：100-240V~50/60Hz 0.2A Permissible operating temperature and humidity
Cleaning Tool: 1 Set
USB Cable: 1 Output：5V 1A 5W
-29- -30-
XII．MAINTENANCE, STORAGE, AND DISPOSAL 3) Keep the devices and case in following environmen-
Maintenance tal ranges: -10℃～55℃, ≤90%RH, 700-1060 hPa
1) We do not authorize any institution or individual to
maintain and/or repair the product. If you suspect that Disposal
the products may be in question, please contact us Please dispose of the device in accordance with the
immediately. directive 2002/96/EC – WEEE (Waste Electrical
2) The user must not attempt any repairs to the device and Electronic Equipment). If you have any
or any of its accessories. Please contact us for any questions, please refer to your local authority
repair needs. responsible for waste disposal.
3) Opening of the equipment by unauthorized agencies
is not allowed and will terminate any claim to warranty.
Warning: No modification of this equipment is permit-
ted.
XIII.WARRANTY
Storage
This limited warranty covers defects in material and
1) Always store your devices in the Charging Case
workmanship for a period of two (2) years from the date
when not in use.
of purchase, which includes the hearing devices,
2) Do not store or expose the devices and/or case to
charger case, and cord within the warranty period.
extreme hot/cold temperatures, moist/humid environ-
ments, or shock/vibration.
Any damage caused by improper handling and care,
-31- -32-
exposure to elements or chemicals, or unauthorized
service will not be covered by the warranty. All other
damage claims excluded. A warranty claim must be
submitted with the purchase receipt.

-33- -34-