Scribd
Upload
39 views

Basic Router Commands

The document outlines basic router and switch commands organized by command mode. It describes the different command modes including user EXEC, privileged EXEC, global configuration, line configuration, and interface configuration. It provides examples of commands used to configure core router and switch settings such as IP addresses, passwords, banners, and default gateways.

Uploaded by

Mesele Berhanu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
39 views

Basic Router Commands

The document outlines basic router and switch commands organized by command mode. It describes the different command modes including user EXEC, privileged EXEC, global configuration, line configuration, and interface configuration. It provides examples of commands used to configure core router and switch settings such as IP addresses, passwords, banners, and default gateways.

Uploaded by

Mesele Berhanu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

=================================

Basic Router Commands

=================================

Router> ---User EXEC mode exit

Router> ?

Router> enable

---------------

Router# ---Privileged EXEC mode disable, exit

Router# ?

-----------------

Router# configure terminal

Router(config)# ---Global Config mode exit, end, Ctrl+c, Ctrl+z

Router(config)# ?

-----------------

Router(config)# line vty 0 15

Router(config)# line console 0

Router(config-line)# ---Line configuration mode exit, end, Ctrl+c, Ctrl+z

Router(config-line)# ?

----------------------------

Router(config)# interface gigabitEthernet 0/0/0

Router(config-if)# ---Interface configuration mode exit, end, Ctrl+c, Ctrl+z

Router(config-if)# ?

----------------------------

Router#

Router# configure terminal

Router# show ?

Router# show running-config

Router# copy running-config startup-config

Router# ping 192.168.1.100

Router# traceroute 192.168.1.100


Router# ssh 192.168.1.100

Router# telnet 192.168.1.100

Router# debug ?

Router# clock set 07:14:00 October 15 2019

Router# reload

---------------------------------

Router(conf)#

Router(conf)# hostname R1

Router(conf)# banner motd "No unauthorized access allowed!"

Router(conf)# enable password class

Router(conf)# enable secret class

Router(conf)# service password-encryption

Router(config)# line vty 0 15

Router(config)# line console 0

Router(config)# interface gigabitEthernet 0/0/0

----------------------------------------------------

Router(config-line)#

Router(config-line)# password cisco

Router(config-line)# login

Router(config-line)# transport input all (line vty)

----------------------------------------------------

Router(config-if)#

Router(config-if)# interface gigabitEthernet 0/0/0

Router(config-if)# int g0/0 //command abbreviation

Router(config-if)# ip address 192.168.1.1 255.255.255.0

Router(config-if)# no shutdown

=================================

Basic Switch Commands


=================================

Switch> ---User EXEC mode exit

Switch> enable

---------------

Switch# ---Privileged EXEC mode disable, exit

-----------------

Switch# configure terminal

Switch(config)# ---Global Config mode exit, end, Ctrl+c, Ctrl+z

-----------------

Switch(config)# line vty 0 15

Switch(config)# line console 0

Switch(config-line)# ---Line configuration mode exit, end, Ctrl+c, Ctrl+z

----------------------------

Switch(config)# interface vlan 1

Switch(config-if)# ---Interface configuration mode exit, end, Ctrl+c, Ctrl+z

----------------------------

Switch#

Switch# configure terminal

Switch# show ?

Switch# show running-config

Switch# copy running-config startup-config

Switch# ping 192.168.1.100

Switch# traceroute 192.168.1.100

Switch# ssh 192.168.1.100

Switch# telnet 192.168.1.100

Switch# debug ?

Switch# clock set 07:14:00 October 15 2019

Switch# reload

---------------------------------

Switch(conf)#
Switch(conf)# hostname R1

Switch(conf)# banner motd "No unauthorized access allowed!"

Switch(conf)# enable password class

Switch(conf)# enable secret class

Switch(conf)# service password-encryption

Switch(config)# line vty 0 15

Switch(config)# line console 0

Switch(config)# interface vlan 1

----------------------------------------------------

Switch(config-line)#

Switch(config-line)# password cisco

Switch(config-line)# login

Switch(config-line)# transport input all (line vty)

----------------------------------------------------

Switch(config-if)#

Switch(config-if)# interface vlan 1

Switch(config-if)# ip address 192.168.1.2 255.255.255.0

Switch(config-if)# no shutdown

Switch(config-if)# exit

Switch(config)# ip default-gateway 192.168.1.1

Extra helpful commands:

=========================

Router(conf)# no ip domain-lookup //prevents miss-typed commands from being "translated..."

Router(conf-line)# logging synchronous //prevents logging output from interrupting your command
input

You might also like