Water Level Meter
More Info | Instructions | Get Quote Model 101 Data Sheet
101 P7
Water Level Meter
Model 101
For measuring the depth to water in wells, boreholes, standpipes,
and tanks, Model 101 Water Level Meters are the industry
standard for portable hand operated meters. They are sturdy,
easy to use and read accurately to 1/100 ft. or each millimeter.
There are two versions to choose from. The Model 101 P7 Water
Level Meter features a pressure-proof probe and laser marked
PVDF tape. The Model 101 P2 Water Level Meter features an
easy-to-repair probe and heat embossed polyethylene tape.
Also available, are the less expensive Model 102 and 102M
Coaxial Cable Water Level Meters for use in small diameter
tubes, and the basic Model 101B Water Level Meter (see Model
102 and 101B Data Sheets). The Model 101D Water Level
DrawDown Meter provides both depth to water and drawdown
measurements using one probe (See Model 101D Data Sheet).
Model 101 P7 Water Level Meter Features
Water Level Meter Reels Accurate: • Markings each 1/100 ft. or millimeter
• Traceable to national standards
With a stand-alone design, convenient carrying handle, and • Sensitivity adjustable to conductivity
sturdy probe holder, the standard reels are ergonomically • Probes avoid false readings in cascading water
designed for ease of use. They are robust and smooth running. Reliable: • Permanent laser markings
The battery is housed in a convenient drawer in the front of the • Non-stretch PVDF tape with stainless steel
reel, allowing quick replacement. The reels are equipped with an conductors
on/off sensitivity switch, light, buzzer, battery test button, brake Long Life: • Rugged, corrosion proof components
and a tape guide stored on the frame. • Strong, flexible tapes
• Easy to splice and repair
Flexible: • PVDF replacement tapes are interchangeable
with other meters
Water Level Meter Specifications
Operating temperature of reel: -20°C to +50°C Water Level Meter Operating Principles
Submerged operating temperature Model 101 Water Level Meters use corrosion proof stainless
-20°C to +80°C
(tape/probe): steel probes attached to permanently marked flat tape, fitted
P7: PVDF, Santoprene, ®Delrin, ®Viton, on a well-balanced reel. They are powered by a standard 9 volt
316 stainless steel battery.
Wetted materials (tape/probe):
P2: MDPE, neoprene, Delrin, The probes incorporate an insulating gap between electrodes.
316 stainless steel When contact is made with water, the circuit is completed,
Probe pressure rating:
P7: Fully submersible to depth of all tape activating a loud buzzer and a light. The water level is then
lengths determined by taking a reading directly from the tape at the top
Reel IP Rating: IP64 (dust and splash proof ) of the well casing or borehole.
P7: 100 to 5000 ft, 30 - 1500 m A sensitivity control allows the buzzer to be turned off while in
Tape lengths: cascading water, and ensures a clear signal in both high and low
P2: 100 to 1000 ft, 30 - 300 m
conductivity conditions.
®
Solinst is a registered trademark of Solinst Canada Ltd. ®
Delrin and Viton are registered trademarks of DuPont Corp.
High Quality Groundwater and Surface Water Monitoring Instrumentation
Water Level Meter
P7 Probe
The P7 Probe is submersible the full length of the tape, therefore,
you can measure total well depth in ideal conditions. The sensor
at the tip of the probe provides consistent measurements with Zero Measurement Point
almost zero displacement. The tape seal plug design allows the
probe to be quickly and easily replaced, if required. Size: 5/8” dia., 5.38” long (16 mm x 137 mm)
Weight: ~4.5 ounces (128 g)
PVDF Laser Marked Tape
The Model 101 P7 Water Level Meter uses extremely durable,
PVDF flat tape, traceable to NIST and EU measurement
standards. Each tape conductor contains 13 strands of stainless
steel, and 6 strands of copper-coated steel, making the tape
non-stretch and high in tensile strength and electrical efficiency.
The tape has a thick dog bone design that prevents adherence
to wet surfaces, and allows it to hang straight in application.
It is also easy to splice. The 3/8" (10 mm) tape comes with LM2: Feet and tenths: with markings every 1/100 ft.
permanent laser markings every 1/100 ft. or each millimeter, in LM3: Meters and centimeters: with markings every mm
lengths up to 5000 ft. (1500 m).
Polyethylene Tape
101 P2 The Model 101 P2 Water Level Meter uses high quality
polyethylene tape that reels smoothly, remains flexible and hangs
straight in the well. Heat embossed marking each millimeter or
1/100 ft. allow accurate readings. The 3/8" (10 mm) wide tapes
come in lengths up to 1000 ft. (300 m).
Seven stranded stainless steel conductors resist corrosion,
provide strength and are non-stretch. They make the tape
very easy to repair and splice. The dog-bone design reduces
adherence to wet surfaces.
M2 Feet and tenths: with markings every 1/100 ft.
M3 Meters and centimeters: with markings every mm.
P2 Probe
The P2 Probe is shielded in design to reduce or eliminate false
readings in cascading water. The probe consists of a stainless Zero Measurement Point
steel body with a neoprene heat shrink seal. It is not suitable for
submergence to any significant depth. Its simple design makes Size: 0.55" dia., 7.5" long (14 mm x 190 mm)
it easy to repair. Weight: ~7 ounces (200 g)
High Quality Groundwater and Surface Water Monitoring Instrumentation
Water Level Meter
Small Medium
Large
Power Reel X-Large
Model 101 Water Level Meter Reels
Length Options Other Options
Solinst Model 101 P7 and P2 Water Level Meters are available Carrying Case: Small and medium padded nylon carrying cases
on reels as shown below, in the following standard lengths: are available, as an optional extra. Their design has a convenient
shoulder strap, zippered front pocket, zippered top, and a
Small Reel * 100 ft. 30 m Medium Reel * 500 ft. 150 m grommet in the base to prevent moisture build-up.
* 200 ft. 60 m * 750 ft. 250 m
Power Reels: Power reels can be very useful to allow faster
* 300 ft. 100 m * 1000 ft. 300 m
Large Reel 1250 ft. 400 m
or less strenuous operation of longer lengths of tape. They are
X-Large Reel 1650 ft. 500 m available as 12V or 110V.
2000 ft. 600 m Replacement Parts: Replacement probes, tapes and other
spare parts are available.
* Polyethylene tapes are only available in these lengths
Tape Guide/Datum
A tape guide is provided with each Meter. It protects the tape
from damage on rough edges of well casing and ensures easy,
consistent measurements, regardless of who takes the readings.
It can also provide support on the casing, for small reels.
Power Winder
The Solinst Model 101 Power Winder allows ease of use when
deploying longer lengths of tape. It is lightweight and easy to
attach to the frame of small, medium and large Model 101 Water
Level Meter reels (see Model 101 Power Winder Data Sheet).
A standard drill provides power to the Power Winder, which
turns the rollers that are in contact with the reel. The drill is used
at various speeds, in forward and reverse, to turn the reel and
unwind and rewind the tape.
Solinst Canada Ltd. 35 Todd Road, Georgetown, Ontario Canada L7G 4R8 www.solinst.com
E-mail: [email protected] Tel: +1 (905) 873-2255; (800) 661-2023 Fax: +1 (905) 873-1992
July 12, 2022
