Scribd
Upload
36 views4 pages

Datacomm Cisko

The document describes the configuration of VLANs on a network switch. It shows: 1) An initial VLAN configuration with VLANs 1, 69, 1002-1005 configured. Port Fa0/10 was assigned to VLAN 69. 2) Fa0/12 was later configured as a trunk port to carry multiple VLANs. 3) VLAN 69 and the configurations on Fa0/10 and Fa0/12 were removed, returning both ports to VLAN 1.

Uploaded by

amoghakantak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
36 views4 pages

Datacomm Cisko

The document describes the configuration of VLANs on a network switch. It shows: 1) An initial VLAN configuration with VLANs 1, 69, 1002-1005 configured. Port Fa0/10 was assigned to VLAN 69. 2) Fa0/12 was later configured as a trunk port to carry multiple VLANs. 3) VLAN 69 and the configurations on Fa0/10 and Fa0/12 were removed, returning both ports to VLAN 1.

Uploaded by

amoghakantak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

1004 fddinet-default active

1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

Remote SPAN VLANs


------------------------------------------------------------------------------

Primary Secondary Type Ports


------- --------- ----------------- ------------------------------------------
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#hohconfig t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname Amogha
Amogha(config)#vlan 69
Amogha(config-vlan)#name amo
Amogha(config-vlan)#exit
Amogha(config)#^Z
Amogha#
%SYS-5-CONFIG_I: Configured from console by console

Amogha#show vlan

VLAN Name Status Ports


---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24
Gig0/1, Gig0/2
69 amo active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
69 enet 100069 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

Remote SPAN VLANs


------------------------------------------------------------------------------

Primary Secondary Type Ports


------- --------- ----------------- ------------------------------------------
Amogha#iniconfig t
Enter configuration commands, one per line. End with CNTL/Z.
Amogha(config)#int fa0/10
Amogha(config-if)#switchport mode access
Amogha(config-if)#switchport access vlan 69
Amogha(config-if)#exit
Amogha(config)#
Amogha#
%SYS-5-CONFIG_I: Configured from console by console

Amogha#show vlan

VLAN Name Status Ports


---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/11, Fa0/12, Fa0/13
Fa0/14, Fa0/15, Fa0/16, Fa0/17
Fa0/18, Fa0/19, Fa0/20, Fa0/21
Fa0/22, Fa0/23, Fa0/24, Gig0/1
Gig0/2
69 amo active Fa0/10
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
69 enet 100069 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
Remote SPAN VLANs
------------------------------------------------------------------------------

Primary Secondary Type Ports


------- --------- ----------------- ------------------------------------------
Amogha#config t
Enter configuration commands, one per line. End with CNTL/Z.
Amogha(config)#swsint fa0/12
Amogha(config-if)#switchport mode swiswitchport switchport switchport access vlan
69
Amogha(config-if)#
Amogha(config-if)#end
Amogha#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Amogha(config)#
%SYS-5-CONFIG_I: Configured from console by console

%LINK-3-UPDOWN: Interface FastEthernet0/5, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to


down

%LINK-5-CHANGED: Interface FastEthernet0/11, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to


up

%LINK-3-UPDOWN: Interface FastEthernet0/11, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to


down

%LINK-5-CHANGED: Interface FastEthernet0/11, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to


up

%LINK-3-UPDOWN: Interface FastEthernet0/11, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to


down

%LINK-5-CHANGED: Interface FastEthernet0/12, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/12, changed state to


up

Amogha(config)#
Amogha(config)#int fa0/12
Amogha(config-if)#switchport mode access
Amogha(config-if)#switchport access vlan 1
Amogha(config-if)#int fa0/10
Amogha(config-if)#switchport mode access
Amogha(config-if)#switchport access vlan 1
Amogha(config-if)#exit
Amogha(config)#no vlan 69
Amogha(config)#exit
Amogha#
%SYS-5-CONFIG_I: Configured from console by console

Amogha#
Amogha#show vlan

VLAN Name Status Ports


---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24
Gig0/1, Gig0/2
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0

Amogha#

You might also like