Page 1 HT Hardware November 2005
EntryFlex System
Page 2 HT Hardware November 2005
1
EntryFlex Hardware Peripherals
Cards
Encoder
Cards
Door devices
Locks
Wall Readers Windis
Programmers
PP
XPP
Software
Page 3 HT Hardware November 2005
1. EntryFlex Hardware: Cards
Mag. Stripe cards
Low coercity Track #3 for Onity systems
High coercity Track #1 & #2 for multiple purpose
Chip cards
2Kbits: 10 open 2Kbyte: 90 open 8Kyte : 400 open
Proxy cards
ISO 14443B 13.56 MHz Proximity technology
Page 4 HT Hardware November 2005
2
EntryFlex Hardware: Encoders
HT22I Insertion Encoder HT22M Motorized Encoder
Read/write LO-CO cards on track #3 Read/write LO/HI -CO cards on track #3
Compatible with any PMS system Read/write CHIPcards
Compatible with any PMS system
HT22IP Insert+Proxy Encoder HT22IP Mot+Proxy Encoder
Read/write LO-CO cards on track #3 Read/write LO/HI -CO cards on track #3
Read/write Prox cards Read/Write Chip cards
Compatible with any PMS system Read/write Prox cards
Compatible with any PMS system
Page 5 HT Hardware November 2005
EntryFlex Hardware: Encoders
HT22X Encoders Conections:
HT Output A-B Format (485 PC Connector
signal up to 1200m) (RS232 signal, up to 12m)
15Vdc / 1A Power Supply
Modem Output
On/Off Switch
HT Com Output (485
signal up to 1200m)
and PP Connector HT Com Output (485
Connector for parallel printer
signal up to 1200m)
Page 6 HT Hardware November 2005
3
EntryFlex Hardware: Encoders
HT22x termination resistor for 485 signal.
Used to close the circuit and stable the communication.
Used when more than one encoder is connected.
Resistor must be set to ON in the last peripheral.
HT22x CE22
Page 7 HT Hardware November 2005
EntryFlex Hardware: Encoders
HT22x Batteries:
In case of a Mains power cut or fail, 6AA Size batteries can be
used.
These batteries will maintain the Locking Plan and the Clock.
Batteries Check and Alarm on Hidden Menu.
Batteries Pack
Page 8 HT Hardware November 2005
4
EntryFlex Hardware: Encoders
HT22x Lithium Battery:
Maintains HT22i program.
In order to change the Lithium Battery, Alkaline batteries must be
charged and mains must be disconnected.
Lithium Battery
Page 9 HT Hardware November 2005
EntryFlex Hardware: Encoders
EDHT22X Display brigthness regulator
Page 10 HT Hardware November 2005
5
EntryFlex Hardware: Revalidator
Revalidator:
Used to revalidate cards (only Mag and SMART cards)
Required Power Supply:.
Standard Encoder Power Supply. 15V / 1,2A
Page 11 HT Hardware November 2005
EntryFlex Hardware: Windis
Win Distributor (H2XCMDIW):
Necessary in all installations.
Organizes data between the PC and the On –
line devices.
Able to manage up to 30 on – line devices up
to 1200m.
For more devices a repeater is needed.
Page 12 HT Hardware November 2005
6
EntryFlex Hardware: Windis
It is required in
all the installations
(no more converter cable)
Page 13 HT Hardware November 2005
EntryFlex Hardware: Windis
HTCom IN LED HTCom OUT LED
Power LED PP Connector
HTCom Output 12Vdc Power
(A B format) Supply
Repeater
HTCom Output PC Connector
Connector
Page 14 HT Hardware November 2005
7
EntryFlex Hardware: Repeater
Repeater connection:
4 wires are required to
complete the connection
between the Win Distributor
and the Repeater.
Repeater
Connector
Page 15 HT Hardware November 2005
EntryFlex Hardware: Repeater
Page 16 HT Hardware November 2005
8
EntryFlex Hardware: Locks
Electronic Lock.
Depending on the lock, different
features can be available:
Page 17 HT Hardware November 2005
EntryFlex Hardware: Wall Readers
Page 18 HT Hardware November 2005
9
EntryFlex Hardware: Wall Readers
CA22 Off - Line Control Unit:
Control unit for off - line wall readers (only one readers) Clock
and Calendar.
Manages up to 1000 guest cards.
Records last 500 openings with 250 guest cards.
Relay contact.
8 relay board connector.
Page 19 HT Hardware November 2005
EntryFlex Hardware: Wall Readers
Relay Contacts
Power Supply
Connector Electric Strike
8 Relay Board Relay
Connector
EEPROM
Reset Button
Unconditional
Opening
Wall Reader
Wall Reader Connector
Page 20 HT Hardware November 2005
10
EntryFlex Hardware: Wall Readers
CE22 On – Line Control Unit:
On - line control unit for on - line wall Anti-passback function.
readers.
Mantains operations even if the
Controlled by PC. communication with the PC is cut.
Access control in real time.
Controls cards validity, expiration,
authorizations.
Control up to 2 wall readers and doors.
Page 21 HT Hardware November 2005
EntryFlex Hardware: Wall Readers
On - line wall reader installation.
Page 22 HT Hardware November 2005
11
EntryFlex Hardware: Wall Readers
On - line wall reader: one reader, one door.
Page 23 HT Hardware November 2005
EntryFlex Hardware: Wall Readers
On - line wall reader: one door, two readers.
Page 24 HT Hardware November 2005
12
EntryFlex Hardware: Wall Readers
On - line wall reader: two doors, two readers.
Page 25 HT Hardware November 2005
EntryFlex Hardware: Wall Readers
Wall Reader Types:
Vertical Readers Horizontal Readers
Page 26 HT Hardware November 2005
13
EntryFlex Hardware: Wall Readers
Mag. stripe WR Dual WR Proxy WR
Read Mag. Stripe Cards Read Mag. & Smart Cards Read Proxy Cards
Send info to Control Unit Send info to Control Unit Send info to Control Unit
Offline & Online Write Smart Cards Offline& Online
Power : 12-24V Offline& Online Power : 12V
Power : 12V
Page 27 HT Hardware November 2005
EntryFlex Hardware: Wall Readers
Magnetic Wall Reader Dual & Prox Wall Reader
Future aplications
Reflashing conector
Clear Button
Connection with H2XIO
Connection with CA22 or CE22
Page 28 HT Hardware November 2005
14
EntryFlex Hardware: Wall Readers
LA22F Off - line horizontal wall reader:
Assembled off - line control unit and wall reader.
Frontal horizontal card insertion.
Reads only magnetic stripe cards.
8 Relay Board Connector.
Suitable for outdoors installations.
Powered with 9Vdc-24Vdc.
Page 29 HT Hardware November 2005
EntryFlex Hardware: Wall Readers
Two ways to install LA22F:
With Metal Box Flush Mounted
Page 30 HT Hardware November 2005
15
EntryFlex Hardware: 8 Relay board
Connections to control board
8 relay Board:
Conected with control Boards
Activated by authorizations
Ouputs from relays
Page 31 HT Hardware November 2005
EntryFlex Hardware: Portable programmer
Portable Programmer (PP):
Data transporter between the HT program and the locks.
Updates and Initializes the locks.
Obtains the audit trail from the locks.
Tests locks status.
Can open locks in any emergency situation.
Page 32 HT Hardware November 2005
16
EntryFlex Hardware: Portable programmer
Jack to transfer
Nine pins connector
and receive
for 485 signal (Win
information from
Dist or Encoder)
locks
Display
4 Alkaline
Batteries
Buttons (back part)
Page 33 HT Hardware November 2005
EntryFlex Hardware: Portable programmer
Testing locks with PP:
Tests Electronic Module, Memory and Electronic Parts.
Lock type (HT24, HT28).
Switches Test: Deadbolt, Handle, Privacy, Card.
Using PP on Test mode, reason for rejected card can be known:
- Not valid for this lock.
- Expired Card.
Page 34 HT Hardware November 2005
17
EntryFlex Hardware: Portable programmer
Extended portable programmer (XPP):
Transfers data between the front desk and the
locks and /or other off-line option and vice versa
Updates and initializes the locks
Obtain the audit trial from the locks
Locks audit trail on screen
Allow to open locks in emergency cases
Page 35 HT Hardware November 2005
EntryFlex Hardware: Software
LOCKING PLAN GUIDE
NETWORK
PRACTICAL EXERCISE
Page 36 HT Hardware November 2005
18
EntryFlex Network.
Insert the flag USEIPCOM in flag.ht2 file
Share the data folder from the Server
All the options in security data folder
Insert the Encoders in the Locking plan
Select the encoder in each station
Page 37 HT Hardware November 2005
EntryFlex Network.
Share the data folder from the Server
All the options in security data folder
Insert one Encoder in the Locking plan
OR
Insert 3 encoders and use USEIPCOM
flag
Page 38 HT Hardware November 2005
19
EntryFlex Locking plan guide.
Steps:
1.- General Configuration (TOOLS / GENERAL CONFIGURATION / CONFIGURATION)
2.- Cards (DATA / GENERAL CONFIGURATION/ CARDS)
3.- Areas (DATA / AREAS)
4.- Hardware Types (DATA / HARDWARE TYPES )
5.- Doors (DATA / DOORS )
6.- Users (DATA / USERS )
7.- Locking Plan (DATA / LOCKING PLAN)
8.- Encoders (TOOLS / GENERAL CONFIGURATION)
9.- Calendar (DATA / CALENDAR)
10.- Timetables ( DATA / TIMETABLES )
11.- Operators ( SECURITY / OPERATORS )
Page 39 HT Hardware November 2005
Page 40 HT Hardware November 2005
20
Page 41 HT Hardware November 2005
21
