KEY PLAN: N

3
303-6001

600
4

1365
303-6001

61110

2520

1440

545
GENERAL NOTES:
SP-20

400

400
1. THIS DRAWING IS THE PROPERTY OF - D.E.C. DYNAMIC DESIGN STUDIO, P.O.Box 79593,
COVER THEMING WITH MODERN DUBAI AND COPYRIGHT PROTECTED. IT IS FORBIDDEN TO PRODUCE IT'S CONTENTS IN
ANY FORM, EXCEPT FOR THE INTENDED PURPOSE.
CORRUGATED METAL PANELS 2. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN METERS UNLESS NOTED
OTHERWISE.
3. DO NOT SCALE FROM THIS DRAWING. ONLY WRITTEN DIMENSIONS ARE TO BE

470
FOLLOWED. MENTIONED SIZE DRAWING SET IS FULL SIZE.
4. ANY DISCREPANCIES BETWEEN ARCHITECTURAL, STRUCTURAL AND SERVICES SHALL BE
BROUGHT TO THE ENGINEER'S NOTICE PRIOR TO EXECUTION OF WORK AT SITE.
5. ALL DIMENSIONS AND LEVELS ARE TO BE CONFIRMED AND ANY DISCREPANCIES OR
ERRORS, SHALL BE REPORTED TO THE ENGINEER PRIOR TO COMMENCEMENT OF WORK.
6. ALL DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL OTHER RELEVANT
DRAWINGS, TOGETHER WITH THE SPECIFICATIONS AND GENERAL NOTES SHEET.
7. THE CONTRACTOR SHALL BE RESPONSIBLE FOR PRODUCING A COMPLETE SET OF
DETAILED, COORDINATED SHOP DRAWINGS FOR CONSULTANT'S APPROVAL PRIOR TO

1200
THE EXECUTION OF WORKS ON SITE.
8. ANY ELECTRICAL WITH SPECIALIZED DISCIPLINES REFERENCED IN THE DRAWINGS
SHALL BE THROUGH THE ENGINEER.

3935
SP-21
3 DIMENSIONAL FRAME AS SP-20
ALUMINUM PANELS COVER THEMING WITH MODERN DRAWING REFERENCES:

3995

3995
DESCRIPTION DWG. REF. NO REV.
CORRUGATED METAL PANELS

1200

5310
1200

585
11980

400

400

1990
455 400
5

1215

1000
303-6001

425 400 400 400 400 400 400 400 400 400 400 290 5385 310 400 400 400 400 400 400 400 400 400 400 415

4365

DRAWING SUBMITTAL STATUS

3365

3360

3360
A Approved B Approved as Noted

C Revise and Resubmit D Rejected

Reviewed By: Date:

0 05.10.23 SL ISSUED FOR APPROVAL

REV. DATE NAME DESCRIPTION

2 LA DECIMA QUEUE BUILDING - FRAMING ELEVATION 3 LA DECIMA - SECTION 1 4 LA DECIMA - SECTION 2 PROJECT:

REAL MADRID WORLD THEME PARK

DUBAI, UAE
PAINTED VERTICAL CORRUGATED METAL
4.8MM DIA SELF TAPPING SCREW WITH 75 MM X 35MM HORIZONTAL METAL C PANELS OF 1200MM X 3000MM TO MATCH
WASHER STUDS AT EVERY 1200MM RAL 9005 JET BLACK

PAINT FINISH ON
EXISTING ROOF - 1200

SP-20 RAL 7016

SP-21
COVER THEMING WITH MODERN 3 DIMENSIONALFRAME
ANTHRACITE GREY 35 35 X 75 MM VERTICAL METAL
CORRUGATED METAL PANELS AS ALUMINUM PANELS C STUDS AT EVERY 400MM
420 400 400

75

75
50
A B
A C
A D
A E
A A
F G
A
50 X 75 MM ANGLE SECTION CLIENT:

FIXED TO THE EXISTING WALL

+10.900 DXB PROJECT &

75
AS SUPPORT FOR FRAME

50
TOP OF STEEL MANAGEMENT SERVICES LLC
EXISTING EPS WALL
+9.035
CLADDING WITH PLASTER CONSULTANT
TOP OF STEEL
EXISTING BLOCK WALL

OPEN OF FI CE 2805 - 2808, CO NCORD TOWE R, M EDI A CI TY , D UBAI , UAE

P.O. BOX: 79593 - TEL.: 04-2989220

5 TYPICAL DETAIL SECTION 5 EMAIL: [email protected]

WEBSITE: www.decdynamicstudio.com

LEGEND: THEMING CONTRACTOR:

+5.200
HIGH LEVEL POINT CODE IMAGE DESCRIPTION

AS CONCRETE PAINT ON
SP-17 PLASTER SURFACE

PAINTED VERTICAL CORRUGATED METAL 150MM X 150MM METAL PAINT ON VERTICAL ELEPHANT GLOBAL DESIGN SERVICES LLC
CORRUGATED METAL FACADE IN
PANELS OF 1200MM X 3000MM TO MATCH CORNER PROFILE
SP-20
RAL 9005 JET BLACK
SP-17 RAL 9005 JET BLACK 150
AS CAST-IN PLACE
CONCRETE SP-21
PAINT ON METAL FRAMES AS PROJECT NO: DP13
ALUMINIUM RAL9007
35 X 75 MM VERTICAL METAL
±0.00 F.F.L STAGE:
GROUND FLOOR
C STUDS AT EVERY 400MM SHOP DRAWING
EXISTING EPS WALL CLADDING WITH

150
SP-22 SCENIC PAINTED SIGNAGE
-0.15 PLASTER DRAWING TITLE:
PAVEMENT LEVEL

75 MM X 35MM HORIZONTAL
LA DECIMA - QUEUE
EXISTING BLOCK WALL METAL C STUDS AT EVERY
1200MM BUILDING CORRUGATED
METAL PANEL
CONNECTION DETAIL
4.8MM DIA SELF TAPPING SCREW WITH
1 LA DECIMA QUEUE BUILDING - ELEVATION WASHER
DRAWING NUMBER:
PROJECT ORIGINATOR DOCUMENT FLOOR DRAWINGS REVISION
ZONE VENUE DISCIPLINE
CODE CODE TYPE LEVEL SERIES NO.

6 CORNER TYPICAL DETAIL DP13 TGE SHD RM3 303 THM 00 6002 00

SCALE: AS SHOWN DATE: 26 - 10 - 2023

PREPARED BY CHECKED PAPER SIZE DIMS IN SHEET NO.

SL VK A0 MM -- / --