GRUNDFOS DATA BOOKLET

SL1, SLV pumps

Generation C
1.5 to 15 hp (1.1 to 11 kW)
60 Hz
 SL1, SLV pumps

1. Introduction 3 11. Dimensions 90

Table of contents

Introduction 3 Auto-coupling installation 90

Applications 3 Free standing installation (without ring stand) 92
Grundfos blueflux® 4 Free standing installation (with ring stand) 94
smartdesign 4
12. Dimensions 96
2. Performance range 5 Auto-coupling installation 96
Performance range for SL1, SLV pumps 5 Free standing installation (without ring stand) 98
Free standing installation (with ring stand) 100
3. Identification 6
Type key 6 13. Accessories 102
Nameplate 6 Installation systems 102
Other accessories 103
4. Selection of product 7 Level controllers 104
Ordering a pump 7
14. Grundfos Product Center 110
5. Variants 8 Grundfos GO 111
List of variants 8

6. Construction 9
SL1 9
SLV 13
Material specification, SL1 and SLV standard 17
Material specification, SLV Q variants 18

7. Product description 19
Features 19
Operating conditions 21
Motor range 22
Pump controllers 22
Variable-speed operation 22
SL 61 R voltage variant 23
Wiring diagrams 24

8. Product range 26
SL1 pump range 26
SLV pump range 28

9. Curve charts and technical data 33

How to read the curve charts 34
Curve conditions 35
Performance tests 35
Certificates 35
Witness test 35

10. Performance curves and technical data 36

SL1.20.A25 36
SL1.20.A30 39
SL1.30.A30 42
SL1.30.A40 48
SL1.40.A40 54
SL1.40.A60 57
SLV.25.A25 60
SLV.25.A30 63
SLV.30.A30 66
SLV.30.A40 76
SLV.40.A40 86

2
SL1, SLV pumps
1
1. Introduction

Introduction
Introduction Applications
This data booklet deals with Grundfos submersible Typical applications are transfer of liquids, such as:
wastewater and sewage pumps, types SL1 and SLV. • municipal wastewater
Two types of pumps are available: • wastewater with a high content of fibers
SL1 pumps with S-tube® impeller (SuperVortex impeller)
• SLV pumps with SuperVortex (free-flow) impeller. • drainage and surface water
• domestic wastewater
• industrial wastewater
• process and cooling water.
The pumps are ideal for pumping the above liquids
from for instance:
• municipal network pumping stations
• inlet pumping stations in wastewater treatment

TM04 3597 4708 - TM04 3598 4708

plants
• primary clarification in wastewater treatment plants
• secondary clarification in wastewater treatment
plants
SL1
• stormwater pumping stations
• public buildings
• residential buildings
SLV
• factories/industry.
Fig. 1 SL1 (S-tube®) and SLV (SuperVortex) pumps

The S-tube® impeller is the only

impeller available in the wastewater
market that compromises neither
efficiency nor free passage through
the pump.

The pumps are SuperVortex or S-tube® impeller

pumps specifically designed for pumping sewage and
wastewater in a wide range of municipal, private and
industrial applications.
The pumps are made of resistant materials, such as
cast iron and stainless steel. These materials ensure
long and reliable operation.
The pumps are fitted with motors from 1.5 hp up to and
including 15 hp (1.1 to 11 kW). The motors are either
2- or 4-pole motors, depending on the motor size. The
free passage in the pumps is 2-4" (50-100 mm)
The pumps are available for:
• submerged installation on auto-coupling system
• submerged installation, free-standing.

3
 SL1, SLV pumps
1
Grundfos blueflux® smartdesign
Introduction

Grundfos blueflux® guarantees the smartdesign describes the

highest motor efficiency from functional design of our products
Grundfos. Every aspect of the that combines elegant appearance
technology driving a Grundfos with smart features, created with
blueflux® motor has been developed customer needs in mind.
to meet the actual needs of the smartdesign does not only look
application for which the pump system good; the design also makes
or solution is installed - and always installation, operation and
with an emphasis on reliability and maintenance of the product easier
efficiency. and more user-friendly.

A pump system or solution with a Grundfos blueflux® The smartdesign features of our SL1 and SLV pumps
motor has a considerably higher total efficiency than include:
comparable solutions and reduces life cycle costs • moisture-proof cable plug connection made of
substantially. The combination of motor technology, corrosion-resistant stainless steel with conductors
advanced pump design and speed control ensures embedded in polyurethane sealant
superior system control, reduced day-to-day service • stainless steel clamp connection between motor
costs and lower environmental impact. housing and pump housing for easy service.
Grundfos blueflux® represents a range of skills and • power cable incorporating wires for thermal sensors
innovative processes that Grundfos brings to motor in the motor windings
technology development. Grundfos was instrumental in
• no extra cable required for sensors in pumps with
the drafting and passing of the EuP Directive, setting
sensors
the ecodesign requirements for electric motors in the
European Union. • monitoring of operating conditions for pumps with
sensors
As a technological leader within high-efficiency motors,
Grundfos was invited to help with the technical aspects • moisture detector for continuous monitoring of
of the legislation. Grundfos was able to create political motor enclosure and automatic cut-out in case of
awareness of the huge savings potential of variable leakage
speed motors and, at a later stage, influence the • heavy-duty bearings greased for life
decision-makers to include variable-frequency drives • built for variable-frequency operation
in the new legislation. As a consequence, Europe's • smooth pump surface prevents dirt and impurities
annual power consumption will be reduced by 5 % by from sticking to the pump
2020 - about ten times more than originally planned
• self-cleaning S-tube® impeller with a long vane
before Grundfos intervened.
reducing the risk of jamming or clogging, or Super-
The Grundfos blueflux® label guarantees that the Vortex impeller with high pumping efficiency and
motor technology used is ahead of current market less downtime
standards and either meets or exceeds legislative
• explosion-proof motors for potentially explosive
requirements for motor efficiency, where these apply.
environments (FM-approved pumps)
• motor in insulation class H (356 °F (180 °C)),
enclosure class IP68 with one thermal sensor in
each phase
• temperature rise class A
• service-friendly design:
– clamp connection between motor and pump
housing
– double mechanical cartridge shaft seal
– cable connection to motor via plug.
• motor built of highly efficient components, offering
lower motor temperature and longer life.

4
SL1, SLV pumps
2
2. Performance range

Performance range
Performance range for SL1, SLV pumps
The figure below shows the performance range of SL1 and SLV sewage and wastewater pumps. It gives an overview
of the various sizes and impeller types.
Note: For information about the performance range of each individual pump, see pages 36 to 89.

H
[ft]
60 Hz
150

100

80 5

60
50

40
4 1 6

30

20
2 3
15

10

6
5

TM04 7578 2014

30 40 50 100 150 200 300 400 500 1000 1500
Q [US GPM]

2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 Q [l/s]

Pump type Curve no. Pump type Curve no.

SL1.20.A25.30 SLV.25.A25.30
SL1.20.A25.40 SLV.25.A25.40
SL1.20.A25.55 SLV.25.A25.55
1 4
SL1.20.A30.30 SLV.25.A30.30
SL1.20.A30.40 SLV.25.A30.40
SL1.20.A30.55 SLV.25.A30.55
SL1.30 2 SLV.30 5
SL1.40 3 SLV.40 6

If your required duty point exceeds the performance range above, please see the Grundfos SE, SL or S range data
booklets available online via Grundfos Product Center.

5
 SL1, SLV pumps
3
3. Identification
Identification

Type key Nameplate

The pump can be identified by means of the type
designation. The type designation is stated on the 15
nameplate of the pump. 1
2
Example SL1.30.A30.55.A.Ex.4.6.0D.A.Q.Z 16
3
R
Code Explanation Designation 4
9901063000000001 17
SL Grundfos sewage/wastewater pump Pump type 5
18
1 S-tube® impeller 6
Impeller type 19
V SuperVortex (free-flow) impeller 7
20
20 2" (50 mm) 8 21
25 2.5" (65 mm) Free spherical 9 22
30 3" (80 mm) passage 10 23
40 4’ (100 mm) 11
24

TM04 4187 0909

A25 ANSI 2.5" (DN 65) 12
25
A30 ANSI 3" (DN 80)
Pump outlet 13
A40 ANSI 4" (DN 100)
14
A60 ANSI 6" (DN 150)
Output power, P2 / 10
55 Power [kW]
55 = 5.5 hp (4.0 kW) Fig. 2 Nameplate
[] Standard
Sensor version
A Sensor version
Pos. Description
2 2-pole
Number of poles 1 Explosion protection classification
4 4-pole
[] Non-explosion-proof pump, standard 2 Thermally protected
Pump version
Ex Explosion-proof pump 3 Type designation
6 60 Hz Frequency [Hz] 4 Serial number
0J 3 x 208 V ∆, direct-on-line starting 5 Production code (year and week)
1H 3 x 460 V ∆ standard, star-delta starting Voltage code 6 Maximum ambient temperature
0L 3 x 575 V ∆, direct-on-line starting and starting
7 Maximum head
1L 3 x 575 V ∆, star-delta starting method
8 Maximum flow rate
1R 3 x 230 V ∆ / 460 V Y, direct-on-line starting
9 Rated input/output power
[] 1st generation
A 2nd generation 10 Rated voltage, D
Generation 11 Rated voltage, Y
B 3rd generation
C 4th generation 12 Frequency
[] Complete pump in cast iron 13 Country of production
Pump material
Q Cast iron pump with stainless steel impeller 14 CSA mark
[] Pump in standard range 15 FM mark
Customization
Z Custom-built pump 16 Enclosure class to IEC
Note: The pump types are not available in all variants. 17 Maximum installation depth
18 Power factor
19 Number of phases
20 Rated speed
21 Service factor
22 Full load current, D
23 Full load current, Y
24 Insulation class
25 Weight without cable

6
SL1, SLV pumps
4
4. Selection of product

Selection of product
Ordering a pump Custom-built variants
When ordering a pump, you need to take the following The pumps can be customized to meet individual
five aspects into consideration: requirements. Many pump features and options are
available for customization, such as explosion-proof
1. pump type
versions, various cable lengths or special materials.
2. custom-built variation (option)
Variants can be seen in the table in List of variants on
3. explosion-proof version page 8. For requirements or designs outside not
4. accessories included in this table, please contact Grundfos.
5. pump controller.
Explosion-proof version
Pump type The entire range is available in explosion-proof
Use the following table to identify the type of pump that versions.
best meets your needs. The table is for guidance only. The SL1 and SLV pumps have the following explosion
protection classification: Class I, Division 1, Groups C
Description SL1 SLV
and D, T4, T3, IP68.
Liquid and operation characteristics
Dry solids content up to 3 % X X Accessories
Dry solids content up to 5 % X
Relatively low content of fibres and solids X X
Depending on the installation type, accessories may
Relatively high content of fibres and solids X be required. See Installation systems on page 102 for
Relatively low number of operating hours X X selection of the correct accessories.
Relatively high number of operating hours X Note: Ordered accessories are not fitted from factory,
Applications but need to be fitted on site.
Stormwater X X
Groundwater X X Pump controller
Drainage and surface water X X
Drainage and surface water with small impurities X X
Abrasive surface water X X
Wastewater with long fibres, e.g. from laundries X X
Domestic wastewater with discharge from toilets X X
Municipal sewage X X
Sewage from commercial buildings X X
Industrial process water with fibres/solids X
Industrial process water with solids X X
Industrial process water without solids and fibres X

When you have selected the pump type, you can

identify the specific pump that best meets your needs
in Dimensions on page 96 and Type key on page 6.
The list below is a detailed description of the product

TM06 0918 1214

you get if you order the following pump:
Pump Product no
SLV.25.A25.30.2.61H.C 98634243

• pump as specified in the type key Fig. 3 Grundfos Dedicated Controls

• 49 ft (15 m) cable
Grundfos Dedicated Controls is a control system
• paint: NCS 9000N black (RAL 9005), gloss code 30, designed for installation in either commercial buildings
thickness 100 μm or network pumping stations with one to six pumps. As
• thermal switch in stator windings standard, the system comes with application-optimized
• tested according to Hydraulic Institute Centrifugal software and can be configured to meet your specific
pump test ANSI/HI 11.6:2012 Grade 3B. pumping needs.
See Performance curves and technical data for For further information about Grundfos Dedicated
selection of a standard pump. Controls, see page 22.
Note: Product-specific data for the pump can also be
found in online via Grundfos Product Center using the
product number 98634243.

7
 SL1, SLV pumps
5
5. Variants
Variants

List of variants
Motor
33 ft (10 m)
Note: When using a different cable length than the 65 ft (20 m)
Various cable lengths standard lengths (i.e. 33 ft and 49 ft), a new cable 80 ft (25 m)
cross section must be calculated 100 ft (30 m)
130 ft (40 m)
33 ft (10 m)
50 ft (15 m)
65 ft (20 m)
EMC power cables Screened power cables for variable-speed drives
80 ft (25 m)
100 ft (30 m)
130 ft (40 m)
Tests
Test at specified duty on standard impeller curve
Trimmed impeller for specified duty test*
Additional test of entire QH curve (including report) Duty points from pump performance curve
ANSI/HI 11.6:2012 grade 1B tolerance
ANSI/HI 11.6:2012 grade 1U tolerance
Different test standard Efficiency guaranteed by Grundfos
ANSI/HI 11.6:2012 grade 2B tolerance
ANSI/HI 11.6:2012 grade 2U tolerance
Test according to customer-specified duty point on
Customer-specified duty point Contact Grundfos
standard pump curve
Vibration test (including report) According to Grundfos factory quality standard
String test Contact Grundfos
Witness test Contact Grundfos
Certificates
FM-approved pump report Special Grundfos report. Contact Grundfos
Certificate of compliance with order According to EN10204 2.1
According to ANSI/HI 11.6:2012 grade
Pump certificate According to EN10204 2.2
3B and 2 and 1
Inspection certificate According to EN10204 3.1
Material specification report According to EN10204 3.1B
Material report with certificate According to EN10204 3.2 Material supplier information
Inspection certificate, Lloyd's Register According to EN10204 3.2
Inspection certificate, DNV (Det Norske Veritas) According to EN10204 3.2
Inspection certificate, Germanisher Lloyd According to EN10204 3.2
Inspection certificate, American Bureau of Shipping According to EN10204 3.2
Inspection certificate, Bureau Veritas According to EN10204 3.2
Registro Italiano Navale Argenture According to EN10204 3.2
Other third-party test certificates Contact Grundfos
Miscellaneous
Solution Customer benefits
• Resistant to acids
• Resistant to mineral oils and vegetable oils
FKM sealing (optional) Contact Grundfos
• Resistant to most solvents (toluene, petrol,
trichloroethylene etc.)
• Resistant to acids
Cable protection hose • Resistant to most oils Contact Grundfos
• Resistant to most solvents etc.
Stainless steel SuperVortex impeller according to EN
Increased wear resistance Contact Grundfos
AISI 316
• Reduced wear rate of cast iron parts
• Increased corrosion resistance
Ceramic coating of impeller and pump housing Contact Grundfos
• Beneficial in case of low number of operating
hours
Extra epoxy coating 300 μm Contact Grundfos
Top coating (black RAL9005, red RAL 3000 and other
Contact Grundfos
colors)
Special packaging Contact Grundfos
Special nameplate Contact Grundfos
Other variants Contact Grundfos
* SLV impellers can be trimmed on request.

8
SL1, SLV pumps
6
6. Construction

Construction
SL1

TM06 1071 1514

Fig. 4 Sectional drawing, SL1 pump, standard version

9
 SL1, SLV pumps
6
Construction

TM06 5983 0216

Fig. 5 Exploded view, SL1 pump, standard version

10
SL1, SLV pumps
6

Construction
TM04 2788 1009
Fig. 6 Sectional drawing, SL1 pump, sensor version

11
 SL1, SLV pumps
6
Construction

TM06 5942 0216

Fig. 7 Exploded view, SL1 pump, sensor version

12
SL1, SLV pumps
6
SLV

Construction
520

TM06 1072 1514

Fig. 8 Sectional drawing, SLV pump, standard version

13
 SL1, SLV pumps
6
Construction

198
174a

151 172
7a

76 9a

37b 108

60

153
150
102
109

59

182 153b
106
177
105
173
521
106
173a 522
157
186
159 107
193a
55
58

150a
184 187
184a
49

66
192 520
188a
61

48 92 92
92a
92a

37

37a

50

37a

194
193

155

6a
158
TM06 5983 0216

154

Fig. 9 Exploded view, SLV pump, standard version

14
SL1, SLV pumps
6

Construction
TM04 2786 2908
Fig. 10 Sectional drawing, SLV pump, sensor version

15
 SL1, SLV pumps
6
Construction

TM06 5984 0216

Fig. 11 Exploded view, SLV pump, sensor version

16
SL1, SLV pumps
6
Material specification, SL1 and SLV standard

Construction
DIN W.-Nr. /
Pos. Component Material AISI/ASTM
EN standard
6a Tubular pin, D8 x 22 A2 Stainless steel 1.4301 304
7a Blank rivet, 2.4 x 6 A2 Stainless steel 1.4301 304
9a Key Stainless steel 1.4301 304
37 O-ring NBR rubber
37a O-ring NBR rubber
37b O-ring NBR rubber
46 Seal ring, inlet NBR rubber/stainless steel 1.4301 304
48 Stator package
ASTM A48
SuperVortex impeller Cast iron EN-GJL-250 5.1301
Class 35B
49
® ASTM A48
S-tube impeller Cast iron, EN-GJL-250 5.1301
Class 35B
49c Wear ring, impeller Stainless steel 1.4301 304
ASTM A48
50 Pump housing Cast iron EN-GJL-250 5.1301
Class 35B
ASTM A48
55 Stator housing Cast iron EN-GJL-250 5.1301
Class 35B
ASTM A48
58 Cover for oil chamber Cast iron EN-GJL-250 5.1301
Class 35B
ASTM A48
59 Bearing cover Cast iron EN-GJL-250 5.1301
Class 35B
66 Washer Stainless steel 1.4436 316
76 Nameplate Stainless steel 1.4401 316
92 Clamp Stainless steel 1.4401 316
92a Screw Stainless steel 1.4436 316
102 Circlip
Shaft seal complete
Stainless steel, SiC/SiC
(rotating part of MG1/25-G60 Q1Q1PGG, stationary part of
105
MG1/25-G60 Q1Q1PGG; rotating part of BT-AR/25 BXPFF,
Carbon/ceramic
stationary part of BT-AR/25 BXPFF)
106 O-ring for shaft seal NBR rubber
107 O-ring (cover for oil chamber) NBR rubber
108 O-ring for shaft seal NBR rubber
109 O-ring for bearing cover D-end NBR rubber
118a Screw Stainless steel 1.4436 316
150a Stator housing complete with stator
153 Bearing, D-end Stainless steel
153b O-ring NBR rubber
154 Bearing, N-end Stainless steel
ASTM A48
155 Oil chamber Cast iron EN-GJL-250 5.1301
Class 35B
157 Corrugated spring (bearing D-end) Stainless steel
158 Corrugated spring (bearing N-end) Stainless steel
172 Shaft with rotor Regular iron/stainless steel 1.0570 1.4401 316
174 Earth screw, external Stainless steel
174a Washer for external earth screw Stainless steel
176 Connector set (internal part)
181 Cable with outer plug part 7G2.5 + 3 x 1
182 Screw Stainless steel 1.4436 316
186 Screw Stainless steel 1.4436 316
187 Screw Stainless steel 1.4436 316
188 Screw Stainless steel 1.4436 316
188a Screw Stainless steel 1.4436 316
190 Lifting bracket Stainless steel 1.4308 CF8M
193 Plug Stainless steel 1.4436 316
194 Gasket
198 O-ring NBR rubber
518 Transient barrier (only sensor versions)
520 Moisture switch
521 WIO sensor (only sensor versions)
522 Bracket for WIO sensor (only sensor versions) Stainless steel 1.4310 301

Material declaration:
Grey cast iron is manufactured according to EN 1561:1997.
Cast stainless steel is manufactured according to EN 10283:2010.
Conversion to other standards such as AISI/ASTM is normative, and products are not manufactured according to these.

17
 SL1, SLV pumps
6
Material specification, SLV Q variants
Construction

DIN W.-Nr. /
Pos. Component Material AISI/ASTM
EN standard
6a Tubular pin, D8 x 22 A2 Stainless steel 1.4301 304
7a Blank rivet, 2.4 x 6 A2 Stainless steel 1.4301 304
9a Key Stainless steel 1.4301 304
37 O-ring NBR rubber
37a O-ring NBR rubber
37b O-ring NBR rubber
46 Seal ring, inlet NBR rubber/stainless steel 1.4301 304
48 Stator package
316/351
49 SuperVortex impeller Stainless steel 1.4408
CF8M
49c Wear ring, impeller Stainless steel 1.4301 304
50 Pump housing Cast iron EN-GJL-250 5.1301
55 Stator housing Cast iron EN-GJL-250 5.1301
58 Cover for oil chamber Cast iron EN-GJL-250 5.1301
59 Bearing cover Cast iron EN-GJL-250 5.1301
66 Washer Stainless steel 1.4436 316
76 Nameplate Stainless steel 1.4401 316
92 Clamp Stainless steel 1.4401 316
92a Screw Stainless steel 1.4436 316
102 Circlip
Shaft seal complete
Stainless steel, SiC/SiC
(rotating part of MG1/25-G60 Q1Q1PGG, stationary
105
part of MG1/25-G60 Q1Q1PGG; rotating part of BT-
Carbon/ceramic
AR/25 BXPFF, stationary part of BT-AR/25 BXPFF)
106 O-ring for shaft seal NBR rubber
107 O-ring (cover for oil chamber) NBR rubber
108 O-ring for shaft seal NBR rubber
109 O-ring for bearing cover D-end NBR rubber
118a Screw Stainless steel 1.4436 316
150a Stator housing complete with stator
153 Bearing, D-end Stainless steel
153b O-ring NBR rubber
154 Bearing, N-end Stainless steel
155 Oil chamber Cast iron EN-GJL-250 5.1301
157 Corrugated spring (bearing D-end) Stainless steel
158 Corrugated spring (bearing N-end) Stainless steel
172 Shaft with rotor Regular iron/stainless steel 1.0570 1.4401 316
174 Earth screw, external Stainless steel
174a Washer for external earth screw Stainless steel
176 Connector set (internal part)
181 Cable with outer plug part 7G2.5 + 3 x 1
182 Screw Stainless steel 1.4436 316
186 Screw Stainless steel 1.4436 316
187 Screw Stainless steel 1.4436 316
188 Screw Stainless steel 1.4436 316
188a Screw Stainless steel 1.4436 316
190 Lifting bracket Stainless steel 1.4308 CF8
193 Plug Stainless steel 1.4436 316
194 Gasket
198 O-ring NBR rubber
518 Transient barrier (only sensor versions)
520 Moisture switch
521 WIO sensor (only sensor versions)
522 Bracket for WIO sensor (only sensor versions) Stainless steel 1.4310 301

Material declaration:
Grey cast iron is manufactured according to EN 1561:1997.
Cast stainless steel is manufactured according to EN 10283:2010.
Conversion to other standards such as AISI/ASTM is normative, and products are not manufactured according to these.

18
SL1, SLV pumps
7
7. Product description

Product description
Features Motor
The motor is a watertight, totally encapsulated motor.
Ball bearings
• Insulation class: H (356 °F (180 °C)).
The bearings are greased for life. Motor insulation fulfills NEMA MG1 part 31 as
Main bearings: regards frequency converter duty.
10 hp (7.5 kW) 4-pole, • Temperature rise class: A.
Angular contact bearing
12 hp (9.2 kW) 2-pole, • Enclosure class: IP68.
3209B.2RS.C3.SYN.
15 hp (11 kW) 2-pole:
4 hp (3 kW) 4-pole to 10 hp (7.5 kW) Angular contact bearing For motor protection and sensors, see Sensors, page
2-pole: 3208B.2RS.C3.SYN. 20.
Support bearings: Single-row deep-groove ball Power cables
bearing. Standard cable
Shaft seal
Outer cable Bending radius
Cable type diameter Fixed Free
[in. (mm)] [in. (mm)] [in. (mm)]
7 G AWG 16 0.523 (13.3) 1.25 (31.8) 1.875 (47.6)
4 G AWG 14 + 3 G 16 AWG 0.636 (16.2) 1.25 (31.8) 1.875 (47.6)
7 G AWG 14 + 3 G 16 AWG 0.811 (20.6) 1.5 (38.1) 2.25 (57.2)
TM05 0015 0511

EMC cable

Outer cable Bending radius

Cable type
diameter
[mm2] Fixed Free
[in. (mm)]
Fig. 12 Double mechanical cartridge shaft seal
4 G AWG 14 + 3 G 16 AWG
0.695 (17.7) 1.5 (38.1) 2.25 (57.2)
The shaft seal consists of two mechanical seals and screened cable

separates the motor from the pumped liquid. The standard cable length is 49 ft (15 m). Other cable
The shaft seal is a cartridge seal that enables easy lengths are available on request. See Various cable
service. lengths, page 8.
The combination of the primary and secondary seals in The number and dimension of cables depend on the
a cartridge results in a shorter assembly length motor size.
compared to traditional shaft seals. Furthermore, this
design minimizes the risk of incorrect fitting.
The primary seal is SiC/SiC and the secondary is
carbon/ceramic.

19
 SL1, SLV pumps
7
Cable entry Sensors
Product description

TM05 0016 0511

TM05 0017 0511

Fig. 13 Moisture-proof cable plug
Fig. 14 Analog water-in-oil sensor
The stainless steel plug is fastened with a union nut.
The nut and O-rings provide sealing against liquid As standard, the pump is equipped with thermal
penetration. switches in the stator windings.
The plug is filled with a polyamide material that is cast Customized analog sensor options
into the plug around the conductors of the cable to
prevent moisture from penetrating into the motor via 1. PT1000 sensor in motor windings for stator
the cable core. temperature measurements.
2. WIO (water-in-oil) sensor. The WIO sensor fitted in
Surface treatment the oil chamber of the pump monitors whether
Grundfos SL1 and SLV pumps are given the following water enters the pump from the liquid side. The
surface treatment: sensor measures the water content (0 to 20 %) in
Powder painting: NCS 9000N (RAL9005 Black) gloss the oil and converts the value into an analog current
code 30, thickness 100 μm. signal which is sent to an IO 113 sensor module. It
also sends a signal if the water content is outside
the normal range (warning), or if there is air in the
oil chamber (alarm). The sensor is fitted in a
stainless steel tube for mechanical protection.
3. Moisture switch. The moisture switch fitted in the
motor chamber monitors whether water enters the
pump. If moisture is detected in the motor chamber,
the moisture switch will trip and send a warning to
the IO 113 sensor module.

20
SL1, SLV pumps
7
IO 113 sensor module Operating conditions

Product description
The SL1 and SLV pumps are only for submerged
installation.

S1 operation

TM05 4166 2112

S3 operation

TM04 2649 2808

Fig. 15 Grundfos IO 113 sensor module

The IO 113 module is a protection module for Grundfos Fig. 16 Operation levels
wastewater pumps. It has inputs for digital and analog
pump sensors and can stop the pump if a sensor • Continuous operation S1 when the pump is fully
indicates a pump fault. IO 113 can be connected to the submerged to the top of the motor.
Dedicated Controls system offered by Grundfos and
provides advanced monitoring functions: P
Operation
• motor temperature

TM02 7776 4003

• moisture in motor
• water in oil
Stop
• insulation resistance.
t
Note: All pump versions with sensor need an IO 113
sensor module to operate properly. Modules are sold Fig. 17 Continuous operation
separately and can be found in Accessories on page
• Intermittent operation S3 with maximum 20 starts
102.
per hour when the pump is submerged to the bottom
Testing of the cable plug. The pump must run for maximum
All pumps are tested before leaving the factory. The 4 minutes and stop for minimum 6 minutes. See fig.
factory test report is based on HI 1.6 - 2000 18.
acceptance level B. Test reports are delivered with the Note: Explosion-proof pumps must always be fully
pump. submerged.
Test certificates can be ordered directly with the pump
P Max.
or separately based on the pump serial number. 4 min.
Operation
Other tests or third-party inspection certificates are

TM04 2656 2808

available on request. See Variants, page 8.
4 min 6 min
Min.
6 min.
Stop
10
10 min.
min t
Fig. 18 Intermittent operation

21
 SL1, SLV pumps
7
Pumped liquids Pump controllers
Product description

Pump Material The pumps must be connected to a control box with a

Material pH value
type variant motor protection relay with IEC trip class 10 or 15.
Cast iron impeller and pump Note: Pumps for hazardous locations must be
SL1/SLV Standard 4-10
housing
connected to a control box with a motor protection
Stainless steel impeller and cast
SLV Q 6-14 1) relay with IEC trip class 10.
iron pump housing

1) The pumps can be controlled by the following pump

For fluctuating pH values the range is pH 4 to 14.
controllers:
Liquid temperature: 32-104 °F
• Grundfos Dedicated Controls
(0-40 °C)
• SLC, Simplex Level Controller
When pumping liquids with a density and/or a • DLC, Duplex Level Controller
kinematic viscosity higher than that of water, use For further information about Dedicated Controls and
motors with correspondingly higher outputs. SLC, DLC controllers, please see page 104.
For short periods (maximum 3 minutes), temperatures
up to 140 °F (60 °C) are permissible (non-Ex versions
only). Variable-speed operation
Sound pressure All SL1, SLV pump types are designed for speed-
controlled operation to keep the energy consumption
The sound pressure level of the pump is lower than the
at a minimum.
limiting values stated in the EC Council directive 2006/
42/EC relating to machinery (the EC Machinery To avoid the risk of sedimentation in the pipes, we
Directive). recommend that you operate the speed-controlled
pump within a speed range of 30 % to 100 % and at a
flow rate above 3.3 ft/s (1 m/s).
Motor range We recommend that you use EMC cables when using
pumps with sensors because it helps prevent
Shaft power
[hp (kW)]
No of poles interference due to line noise.
1.5 (1.1) 4 For more information, please see the installation and
1.8 (1.3) 4 operation instructions of SL1/SLV pumps US-P/N
2 (1.5) 4 97640137 at www.grundfos.com.
3 (2.2) 2/4
4 (3) 2/4 Approvals
5.5 (4) 2/4
The SL1 and SLV pumps have been approved by CSA
7.5 (5.5) 4
8 (6) 2
and FM, and the explosion-proof versions hold an FM
10 (7.5) 2 type examination certificate no. 3035318.
12.5 (9.2) 2
15 (11) 2 Approval standards
The pumps are approved by CSA and FM according to
UL778, C22.2 no. 108 and FM 3600, FM3615 and
FM3615.80.

Explanation of FM approval
The SL1 and SLV pumps have the following explosion
protection classification: Class I, Division 1, Groups C
and D, T4, T3, IP68.
Standards Code Description
Explosive atmosphere is
Class I =
caused by gas or vapors
Division 1 = Area classification
FM3600 Groups C and D = Classification of gases
FM3615 Maximum surface temperatures
FM3615.80 T4/T3 = are 275 °F (135 °C) and 392 °F
(200 °C), respectively
Enclosure class according to
IP68 =
IEC 60529

22
SL1, SLV pumps
7
SL 61 R voltage variant

Product description
To standardize and help minimize part numbers and
pump versions of the SL product portfolio, Grundfos
created the 61 R voltage variant. 61 R is a dual-voltage
(230 V / 460 V), three-phase, 60 Hz, direct-on-line
(DOL) connected motor.
• Connect 230 V pumps using the low-voltage (delta)
connection.
• Connect 460 V pumps using the high-voltage (star)
connection.

TM05 7155 0613

Fig. 19 61 R, 230 V DOL wired in low-voltage (delta)

connection
TM05 7156 0613

Fig. 20 61 R, 460 V DOL wired in high-voltage (star)

connection

The 61 R voltage variant provides a large voltage

range for supply power.
Stated voltage Percentage variation Voltage range
230 V +/- 10 % 207-253 V
460 V +/- 10 % 414-506 V

23
 SL1, SLV pumps
7
Wiring diagrams
Product description

Yellow, green

TM04 6689 0710

Standard version Sensor version
Thermal switches Thermal switch and PT1000 resistor
Moisture switch Moisture switch and water-in-oil sensor
CSA-approved CSA-approved, with/without FM approval

Fig. 21 Wiring diagram, 7-core cable, direct online

Yellow, green

TM04 6690 0710

Standard version Sensor version

Thermal switches Thermal switch and PT1000 resistor
Moisture switch Moisture switch and water-in-oil sensor
CSA-approved CSA-approved, with/without FM approval

Fig. 22 Wiring diagram, 10-core cable, star/delta (Y/D)

24
SL1, SLV pumps
7

Product description
Yellow, green

TM04 6691 0710

Standard version Sensor version
Thermal switches Thermal switch and PT1000 resistor
Moisture switch Moisture switch and water-in-oil sensor
CSA-approved CSA-approved, with/without FM approval

Fig. 23 Wiring diagram, 10-core cable, direct online, star-connected (Y)

Yellow, green

TM04 6692 0710

Standard version Sensor version

Thermal switches Thermal switch and PT1000 resistor
Moisture switch Moisture switch and water-in-oil sensor
CSA-approved CSA-approved, with/without FM approval

Fig. 24 Wiring diagram, 10-core cable, direct online, delta-connected (D)

25
 SL1, SLV pumps
8
8. Product range
Product range

SL1 pump range

With 49-ft cable
Voltage
Explosion- 3 x 230 V D/ Stainless steel
Pump type Sensor* Poles Hz 3 x 208 V 3 x 460 V Y/ 3 x 575 V 3 x 575 V Y/
proof 460 V Y impeller
DOL D DOL D
DOL

[.A] [.EX] [.2] [.6] [0J] [1R] [1H] [0L] [1L] [.Q]
Yes 2 60 99034397 99030154 98634793 No
Yes
No 2 60 ** ** ** No
SL1.20.A25.30
Yes 2 60 99034398 99030117 98634714 No
No
No 2 60 99034394 99030073 98634556 No
Yes 2 60 99034401 99030155 98634794 No
Yes
No 2 60 ** ** ** No
SL1.20.A25.40
Yes 2 60 99034402 99030118 98634715 No
No
No 2 60 99034399 99030074 98634557 No
Yes 2 60 99034405 99030156 98634795 No
Yes
No 2 60 ** ** ** No
SL1.20.A25.55
Yes 2 60 99034707 99030119 98634716 No
No
No 2 60 99034403 99030075 98634558 No
Yes 2 60 99034408 99030069 98634796 No
Yes
No 2 60 ** ** ** No
SL1.20.A30.30
Yes 2 60 99034409 99030067 98634717 No
No
No 2 60 99034406 99030066 98634559 No
Yes 2 60 99034412 99030157 98634797 No
Yes
No 2 60 ** ** ** No
SL1.20.A30.40
Yes 2 60 99034709 99030120 98634718 No
No
No 2 60 99034410 99030076 98634560 No
Yes 2 60 99034415 99030158 98634798 No
Yes
No 2 60 ** ** ** No
SL1.20.A30.55
Yes 2 60 99034711 99030121 98634719 No
No
No 2 60 99034413 99030077 98634561 No
Yes 4 60 99034821 99030159 98634799 No
Yes
No 4 60 ** ** ** No
SL1.30.A30.20
Yes 4 60 99034807 99030122 98634720 No
No
No 4 60 99034779 99030078 98634562 No
Yes 4 60 99034724 99030160 98634800 No
Yes
No 4 60 ** ** ** No
SL1.30.A30.30
Yes 4 60 99034725 99030123 98634721 No
No
No 4 60 99034418 99030079 98634563 No
Yes 4 60 99034726 99030162 98634801 No
Yes
No 4 60 ** ** ** No
SL1.30.A30.40
Yes 4 60 99034727 99030125 98634722 No
No
No 4 60 99034420 99030080 98634564 No
Yes 4 60 99034728 99030164 98634803 No
Yes
No 4 60 ** ** ** No
SL1.30.A30.55
Yes 4 60 99034729 99030127 98634724 No
No
No 4 60 99034422 99030082 98634566 No
Yes 4 60 99034730 99030165 98634804 No
Yes
No 4 60 ** ** ** No
SL1.30.A30.75
Yes 4 60 99034731 99030128 98634725 No
No
No 4 60 99034424 99030083 98634567 No
Yes 4 60 99034712 99030163 98634802 No
Yes
No 4 60 ** ** ** No
SL1.30.A30.100
Yes 4 60 99034723 99030126 98634723 No
No
No 4 60 99034416 99030081 98634565 No
* An IO 113 module is required with the sensor model pump. IO modules are not included with the pumps and can be found in Accessories on page
102.
** Contact Grundfos.

26
SL1, SLV pumps
8

Product range
Voltage
Explosion- 3 x 230 V D/ Stainless steel
Pump type Sensor* Poles Hz 3 x 208 V 3 x 460 V Y/ 3 x 575 V 3 x 575 V Y/
proof 460 V Y impeller
DOL D DOL D
DOL

[.A] [.EX] [.2] [.6] [0J] [1R] [1H] [0L] [1L] [.Q]
Yes 4 60 99034822 99030166 98634805 No
Yes
No 4 60 ** ** ** No
SL1.30.A40.20
Yes 4 60 99034808 99030129 98634726 No
No
No 4 60 99034780 99030084 98634568 No
Yes 4 60 99034734 99030167 98634806 No
Yes
No 4 60 ** ** ** No
SL1.30.A40.30
Yes 4 60 99034735 99030130 98634727 No
No
No 4 60 99034428 99030071 98634569 No
Yes 4 60 99034736 99030169 98634807 No
Yes
No 4 60 ** ** ** No
SL1.30.A40.40
Yes 4 60 99034737 99030131 98634728 No
No
No 4 60 99034430 99030085 98634570 No
Yes 4 60 99034738 99030171 98634809 No
Yes
No 4 60 ** ** ** No
SL1.30.A40.55
Yes 4 60 99034739 99030144 98634730 No
No
No 4 60 99034432 99030072 98634572 No
Yes 4 60 99034740 99030172 98634810 No
Yes
No 4 60 ** ** ** No
SL1.30.A40.75
Yes 4 60 99034741 99030145 98634731 No
No
No 4 60 99034434 99030086 98634573 No
Yes 4 60 99034732 99030170 98634808 No
Yes
No 4 60 ** ** ** No
SL1.30.A40.100
Yes 4 60 99034733 99030132 98634729 No
No
No 4 60 99034426 99030070 98634571 No
Yes 4 60 99034744 99030174 98634812 No
Yes
No 4 60 ** ** ** No
SL1.40.A40.55
Yes 4 60 99034440 99030148 98634733 No
No
No 4 60 99034438 99030088 98634575 No
Yes 4 60 99034745 99030175 98634813 No
Yes
No 4 60 ** ** ** No
SL1.40.A40.75
Yes 4 60 99034443 99030149 98634734 No
No
No 4 60 99034441 99030089 98634576 No
Yes 4 60 99034742 99030173 98634811 No
Yes
No 4 60 ** ** ** No
SL1.40.A40.100
Yes 4 60 99034743 99030147 98634732 No
No
No 4 60 99034436 99030087 98634574 No
Yes 4 60 99034451 99030177 98634815 No
Yes
No 4 60 ** ** ** No
SL1.40.A60.55
Yes 4 60 99034452 99030151 98634736 No
No
No 4 60 99034449 99030091 98634578 No
Yes 4 60 99034455 99030178 98634816 No
Yes
No 4 60 ** ** ** No
SL1.40.A60.75
Yes 4 60 99034457 99030153 98634737 No
No
No 4 60 ** ** ** No
Yes 4 60 99034746 99030176 98634814 No
Yes
No 4 60 ** ** ** No
SL1.40.A60.100
Yes 4 60 99034448 99030150 98634735 No
No
No 4 60 99034445 99030090 98634577 No
* An IO 113 module is required with the sensor model pump. IO modules are not included with the pumps and can be found in Accessories on page
102.
** Contact Grundfos.

27
 SL1, SLV pumps
8
SLV pump range
Product range

With 49-ft cable

Voltage
Explosion- 3 x 230 V D/ Stainless steel
Pump type Sensor* Poles Hz 3 x 208 V 3 x 460 V Y/ 3 x 575 V 3 x 575 V Y/
proof 460 V Y impeller
DOL D DOL D
DOL

[.A] [.EX] [.2] [.6] [0J] [1R] [1H] [0L] [1L] [.Q]
** ** ** Yes
Yes 2 60
99034460 99030285 98634817 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.25.A25.30
** ** ** Yes
Yes 2 60
99034461 99030254 98634738 No
No
** ** ** Yes
No 2 60
99034748 99030181 98634580 No
** ** ** Yes
Yes 2 60
99034463 99030286 98634818 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.25.A25.40
** ** ** Yes
Yes 2 60
99034464 99030255 98634739 No
No
** ** ** Yes
No 2 60
99034749 99030182 98634581 No
** 99030429 ** Yes
Yes 2 60
99034466 99030287 98634819 No
Yes
** 99030431 ** Yes
No 2 60
** ** ** No
SLV.25.A25.55
** 99030428 ** Yes
Yes 2 60
99034467 99030256 98634740 No
No
** 99030430 ** Yes
No 2 60
99034750 99030183 98634582 No
** ** ** Yes
Yes 2 60
99034469 99030288 98634820 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.25.A30.30
** ** ** Yes
Yes 2 60
99034470 99030257 98634741 No
No
** ** ** Yes
No 2 60
99034751 99030184 98634583 No
** ** ** Yes
Yes 2 60
99034473 99030290 98634821 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.25.A30.40
** ** ** Yes
Yes 2 60
99034474 99030258 98634742 No
No
** ** ** Yes
No 2 60
99034471 99030186 98634584 No
** 99030433 ** Yes
Yes 2 60
99034477 99030291 98634822 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.25.A30.55
** 99030432 ** Yes
Yes 2 60
99034478 99030259 98634743 No
No
** 99030434 ** Yes
No 2 60
99034475 99030187 98634585 No
* An IO 113 module is required with the sensor model pump. IO modules are not included with the pumps and can be found in Accessories on page
102.
** Contact Grundfos.

28
SL1, SLV pumps
8

Product range
Voltage
Explosion- 3 x 230 V D/ Stainless steel
Pump type Sensor* Poles Hz 3 x 208 V 3 x 460 V Y/ 3 x 575 V 3 x 575 V Y/
proof 460 V Y impeller
DOL D DOL D
DOL

[.A] [.EX] [.2] [.6] [0J] [1R] [1H] [0L] [1L] [.Q]
** 99030409 98634834 Yes
Yes 4 60
99034498 99030297 98634833 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.30.A30.15
** 99030384 98634755 Yes
Yes 4 60
99034811 99030266 98634754 No
No
** 99030335 98634598 Yes
No 4 60
99034781 99030195 98634597 No
** 99030410 98634836 Yes
Yes 4 60
99034500 99030298 98634835 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.30.A30.18
** 99030385 98634757 Yes
Yes 4 60
99034813 99030267 98634756 No
No
** 99030336 98634600 Yes
No 4 60
99034793 99030196 98634599 No
** 99030404 98634824 Yes
Yes 4 60
99034823 99030292 98634823 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.30.A30.20
** 99030379 98634745 Yes
Yes 4 60
99034809 99030260 98634744 No
No
** 99030320 98634587 Yes
No 4 60
99034778 99030188 98634586 No
** 99030405 98634826 Yes
Yes 4 60
99034503 99030293 98634825 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.30.A30.30
** 99030380 98634747 Yes
Yes 4 60
99034504 99030261 98634746 No
No
** 99030321 98634589 Yes
No 4 60
99034501 99030190 98634588 No
** 99030412 98634840 Yes
2 60
99034509 99030413 98634839 No
Yes
** 99030300 98634842 Yes
4 60
99034510 99030301 98634841 No
Yes
** ** ** Yes
2 60
** ** ** No
No
** ** ** Yes
4 60
** ** ** No
SLV.30.A30.55
** 99030387 98634761 Yes
2 60
99034511 99030388 98634760 No
Yes
** 99030269 98634763 Yes
4 60
99034512 99030270 98634762 No
No
** 99030338 98634604 Yes
2 60
99034505 99030339 98634603 No
No
** 99030198 98634606 Yes
4 60
99034752 99030199 98634605 No
** 99030406 98634828 Yes
Yes 2 60
99034516 99030294 98634827 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.30.A30.80
** 99030381 98634749 Yes
Yes 2 60
99034517 99030262 98634748 No
No
** 99030322 98634591 Yes
No 2 60
99034514 99030191 98634590 No
* An IO 113 module is required with the sensor model pump. IO modules are not included with the pumps and can be found in Accessories on page
102.
** Contact Grundfos.

29
 SL1, SLV pumps
8
Product range

Voltage
Explosion- 3 x 230 V D/ Stainless steel
Pump type Sensor* Poles Hz 3 x 208 V 3 x 460 V Y/ 3 x 575 V 3 x 575 V Y/
proof 460 V Y impeller
DOL D DOL D
DOL

[.A] [.EX] [.2] [.6] [0J] [1R] [1H] [0L] [1L] [.Q]
** 99030407 98634830 Yes
Yes 2 60
99034481 99030295 98634829 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.30.A30.100
** 99030382 98634751 Yes
Yes 2 60
99034482 99030263 98634750 No
No
** 99030333 98634594 Yes
No 2 60
99034479 99030193 98634592 No
** 99030411 98634838 Yes
Yes 2 60
99034495 99030299 98634837 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.30.A30.125
** 99030386 98634759 Yes
Yes 2 60
99034496 99030268 98634758 No
No
** 99030337 98634602 Yes
No 2 60
99034493 99030197 98634601 No
** 99030408 98634832 Yes
Yes 2 60
99034662 99030296 98634831 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.30.A30.150
** 99030383 98634753 Yes
Yes 2 60
99034664 99030265 98634752 No
No
** 99030334 98634596 Yes
No 2 60
99034658 99030194 98634595 No
** 99030419 98634854 Yes
Yes 4 60
99034527 99030307 98634853 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.30.A40.15
** 99030394 98634776 Yes
Yes 4 60
99034817 99030276 98634775 No
No
** 99030345 98634618 Yes
No 4 60
99034797 99030205 98634617 No
** 99030420 98634856 Yes
Yes 4 60
99034529 99030308 98634855 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.30.A40.18
** 99030395 98634778 Yes
Yes 4 60
99034819 99030277 98634777 No
No
** 99030346 98634620 Yes
No 4 60
99034799 99030206 98634619 No
** 99030414 98634844 Yes
Yes 4 60
99034825 99030302 98634843 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.30.A40.20
** 99030389 98634766 Yes
Yes 4 60
99034815 99030271 98634765 No
No
** 99030340 98634608 Yes
No 4 60
99034795 99030200 98634607 No
** 99030415 98634846 Yes
Yes 4 60
99034532 99030303 98634845 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.30.A40.30
** 99030390 98634768 Yes
Yes 4 60
99034533 99030272 98634767 No
No
** 99030341 98634610 Yes
No 4 60
99034530 99030201 98634609 No
* An IO 113 module is required with the sensor model pump. IO modules are not included with the pumps and can be found in Accessories on page
102.
** Contact Grundfos.

30
SL1, SLV pumps
8

Product range
Voltage
Explosion- 3 x 230 V D/ Stainless steel
Pump type Sensor* Poles Hz 3 x 208 V 3 x 460 V Y/ 3 x 575 V 3 x 575 V Y/
proof 460 V Y impeller
DOL D DOL D
DOL

[.A] [.EX] [.2] [.6] [0J] [1R] [1H] [0L] [1L] [.Q]
** 99030422 98634860 Yes
2 60
99034537 99030423 98634859 No
Yes
** 99030310 98634862 Yes
4 60
99034538 99030311 98634861 No
Yes
** ** ** Yes
2 60
** ** ** No
No
** ** ** Yes
4 60
** ** ** No
SLV.30.A40.55
** 99030397 98634782 Yes
2 60
99034539 99030399 98634781 No
Yes
** 99030279 98634784 Yes
4 60
99034759 99030280 98634783 No
No
** 99030348 98634624 Yes
2 60
99034534 99030349 98634623 No
No
** 99030208 98634626 Yes
4 60
99034536 99030209 98634625 No
** 99030416 98634848 Yes
Yes 2 60
99034542 99030304 98634847 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.30.A40.80
** 99030391 98634770 Yes
Yes 2 60
99034543 99030273 98634769 No
No
** 99030342 98634612 Yes
No 2 60
99034540 99030202 98634611 No
** 99030417 98634850 Yes
Yes 2 60
99034520 99030305 98634849 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.30.A40.100
** 99030392 98634772 Yes
Yes 2 60
99034521 99030274 98634771 No
No
** 99030343 98634614 Yes
No 2 60
99034518 99030203 98634613 No
** 99030421 98634858 Yes
Yes 2 60
99034524 99030309 98634857 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.30.A40.125
** 99030396 98634780 Yes
Yes 2 60
99034525 99030278 98634779 No
No
** 99030347 98634622 Yes
No 2 60
99034522 99030207 98634621 No
** 99030418 98634852 Yes
Yes 2 60
99034670 99030306 98634851 No
Yes
** ** ** Yes
No 2 60
** ** ** No
SLV.30.A40.150
** 99030393 98634774 Yes
Yes 2 60
99034672 99030275 98634773 No
No
** 99030344 98634616 Yes
No 2 60
99034666 99030204 98634615 No
** 99030424 98634864 Yes
Yes 4 60
99034549 99030312 98634863 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.40.A40.40
** 99030400 98634786 Yes
Yes 4 60
99034765 99030281 98634785 No
No
** 99030350 98634628 Yes
No 4 60
99034548 99030210 98634627 No
* An IO 113 module is required with the sensor model pump. IO modules are not included with the pumps and can be found in Accessories on page
102.
** Contact Grundfos.

31
 SL1, SLV pumps
8
Product range

Voltage
Explosion- 3 x 230 V D/ Stainless steel
Pump type Sensor* Poles Hz 3 x 208 V 3 x 460 V Y/ 3 x 575 V 3 x 575 V Y/
proof 460 V Y impeller
DOL D DOL D
DOL

[.A] [.EX] [.2] [.6] [0J] [1R] [1H] [0L] [1L] [.Q]
** 99030426 98634868 Yes
Yes 4 60
99034552 99030314 98634867 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.40.A40.55
** 99030402 98634790 Yes
Yes 4 60
99034767 99030283 98634789 No
No
** 99030352 98634632 Yes
No 4 60
99034550 99030213 98634631 No
** 99030427 98634870 Yes
Yes 4 60
99034565 99030315 98634869 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.40.A40.75
** 99030403 98634792 Yes
Yes 4 60
99034566 99030284 98634791 No
No
** 99030353 98634634 Yes
No 4 60
99034563 99030214 98634633 No
** 99030425 98634866 Yes
Yes 4 60
99034547 99030313 98634865 No
Yes
** ** ** Yes
No 4 60
** ** ** No
SLV.40.A40.100
** 99030401 98634788 Yes
Yes 4 60
99034761 99030282 98634787 No
No
** 99030351 98634630 Yes
No 4 60
99034545 99030212 98634629 No
* An IO 113 module is required with the sensor model pump. IO modules are not included with the pumps and can be found in Accessories on page
102.
** Contact Grundfos.

32
SL1, SLV pumps
9
9. Curve charts and technical data

Curve charts and technical data

The following pages are divided into sections: Pages 36 to 89 gives the pump performance curve,
Pages 34 and 35 give a brief explanation of how to electrical and pump data.
read the curve charts and the curve conditions etc.
Performance curves and technical data

Page Pump curves Page Pump curves Page Pump curves Page Pump curves
Performance curves: Performance curves: Performance curves: Performance curves:
36 50 64 78
SL1.20.A25.30.2.--.C SL1.30.A40.40.4.--.C SLV.25.A30.40.2.--.C SLV.30.A40.20.4.--.C
Performance curves: Performance curves: Performance curves: Performance curves:
37 51 65 79
SL1.20.A25.40.2.--.C SL1.30.A40.55.4.--.C SLV.25.A30.55.2.--.C SLV.30.A40.30.4.--.C
Performance curves: Performance curves: Performance curves: Performance curves:
38 52 66 80
SL1.20.A25.55.2.--.C SL1.30.A40.75.4.--.C SLV.30.A30.15.4.--.C SLV.30.A40.55.2.--.C
Performance curves: Performance curves: Performance curves: Performance curves:
39 53 67 81
SL1.20.A30.30.2.--.C SL1.30.A40.100.4.--.C SLV.30.A30.18.4.--.C SLV.30.A40.55.4.--.C
Performance curves: Performance curves: Performance curves: Performance curves:
40 54 68 82
SL1.20.A30.40.2.--.C SL1.40.A40.55.4.--.C SLV.30.A30.20.4.--.C SLV.30.A40.80.2.--.C
Performance curves: Performance curves: Performance curves: Performance curves:
41 55 69 83
SL1.20.A30.55.2.--.C SL1.40.A40.75.4.--.C SLV.30.A30.30.4.--.C SLV.30.A40.100.2.--.C
Performance curves: Performance curves: Performance curves: Performance curves:
42 56 70 84
SL1.30.A30.20.4.--.C SL1.40.A40.100.4.--.C SLV.30.A30.55.2.--.C SLV.30.A40.125.2.--.C
Performance curves: Performance curves: Performance curves: Performance curves:
43 57 71 85
SL1.30.A30.30.4.--.C SL1.40.A60.55.4.--.C SLV.30.A30.55.4.--.C SLV.30.A40.150.2.--.C
Performance curves: Performance curves: Performance curves: Performance curves:
44 58 72 86
SL1.30.A30.40.4.--.C SL1.40.A60.75.4.--.C SLV.30.A30.80.2.--.C SLV.40.A40.40.4.--.C
Performance curves: Performance curves: Performance curves: Performance curves:
45 59 73 87
SL1.30.A30.55.4.--.C SL1.40.A60.100.4.--.C SLV.30.A30.100.2.--.C SLV.40.A40.55.4.--.C
Performance curves: Performance curves: Performance curves: Performance curves:
46 60 74 88
SL1.30.A30.75.4.--.C SLV.25.A25.30.2.--.C SLV.30.A30.125.2.--.C SLV.40.A40.75.4.--.C
Performance curves: Performance curves: Performance curves: Performance curves:
47 61 75 89
SL1.30.A30.100.4.--.C SLV.25.A25.40.2.--.C SLV.30.A30.150.2.--.C SLV.40.A40.100.4.--.C
Performance curves: Performance curves: Performance curves:
48 62 76
SL1.30.A40.20.4.--.C SLV.25.A25.55.2.--.C SLV.30.A40.15.4.--.C
Performance curves: Performance curves: Performance curves:
49 63 77
SL1.30.A40.30.4.--.C SLV.25.A30.30.2.--.C SLV.30.A40.18.4.--.C

33
 SL1, SLV pumps
9
How to read the curve charts
Curve charts and technical data

Total pump head QH curve Pump type

H = Htotal

H H
[m] [ft] SLV.30.A40.30.4
14
45 60 Hz Eff
QH HI 11.6:2012 3B [%]
12 40 50

35 45
10
Eff2 is the hydraulic
30 40 efficiency (pump)
8
25 35 Eff1 is the total
efficiency (pump +
motor)
6 20 30

15 25
4
10 20
2 Eff 2
5 15
Eff 1

0 0 10
0 50 100 150 200 250 300 350 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 v [ft/s]
P P
[kW] [hp]
3.5 P1
2.5

3.0 P2
2.0 Power curves
2.5 indicating input power
(P1) and output power
(P2) of the pump
1.5 2.0 NPSH shown
[ft] [m]
1.5 20 6
1.0
4
1.0 10
NPSH 2
0.5
0.5 0 0
0 50 100 150 200 250 300 350 Q [US GPM]
TM04 7268 1910

0 2 4 6 8 10 12 14 16 18 20 22 24 Q [l/s]
NPSH curves.
When sizing the pump,
add a safety margin of at
least 0.5 m.

34
SL1, SLV pumps
9
Curve conditions Performance tests

Curve charts and technical data

The guidelines below apply to the curves shown in the All pumps are factory tested to a Grundfos testing
performance charts on pages 36 to 89. standard that is similar to the hydraulic Institute
• Tolerances according to HI 11.6 - 2012 acceptance 11.6:2012 grade 3B. These Grundfos standard curves
level 3B. are provided with each pump. For tests according to
• The curves show pump performance with different ANSI/HI 11.6:2012 grade 3B, see Tests on page 8.
impeller diameters at the rated speed. The testing equipment and measuring instruments are
• The bold part of the curves show the recommended designed and calibrated in accordance with the
operating range. mentioned standards.
• The curves apply to the pumping of airless water at For customized duty point or other grades with 5 point
a temperature of 68 °F (20 °C) and a kinematic test certificate, please contact Grundfos in order to
viscosity of 1 cSt (1.076 (ft2/s) x 10-5). agree on terms before ordering.
• Eff: The lines show values of the hydraulic
efficiency, i.e. Eff1 is the total efficiency (pump + Certificates
motor) and Eff2 is the hydraulic efficiency (pump).
Certificates have to be confirmed for every order and
• NPSH: The curves show average values measured are available on request. See Certificates on page 8.
under the same conditions as the performance
curves.
When dimensioning the pump, add a safety margin Witness test
of at least 1.6 ft (0.5 m). It is possible for the customer to witness the testing
• In case of densities other than 133.5 ounces/gallon procedure according to Hydraulic Institute 11.6 - 2012.
(1000 kg/m3), the outlet pressure is proportional to The witness test is not a certificate and will not result in
the density. a written statement from Grundfos. The witness test
• When pumping liquids with a density higher than only guarantees that everything is carried out as
133.5 ounces/gallon (1000 kg/m3), motors with prescribed in the testing procedure.
correspondingly higher outputs must be used. If the customer wants to witness the pump
Calculation of total head performance test, such request must be stated on the
order.
The total pump head consists of the height difference
between the measuring points + the differential head +
the dynamic head.

H total = H geo + Hstat + Hdyn

Hgeo: Height difference between measuring points.

Hstat: Differential head between the inlet and the
outlet side of the pump.
Hdyn: Calculated values based on the velocity of the
pumped liquid on the inlet and the outlet side
of the pump.

35
10
Performance curves and technical data

10. Performance curves and technical data

SL1.20.A25
Performance curves: SL1.20.A25.30.2.--.C

H H
[m] [ft] SL1.20.A25.30.2
25 60 Hz
80 Eff
HI 11.6:2012 3B [%]
70 70
20 QH

60 Eff 2 60

15 50 50

40 40
Eff 1
10
30 30

20 20
5
10 10

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 2½ / DN 65
0 2 4 6 8 10 12 14 16 18 v [ft/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
P P
[kW] [hp]

3 4 P1
NPSH
[ft] [m]
3 P2 30
2 8

2 20 6

1 4
1 10
NPSH

TM04 7833 4318

2

0 0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

4.0 3.0 0.154

60J 3 x 208 V D 2 3503 DOL 8.6 68 83.8 85.8 85.0 0.78 0.85 0.89 1.15 15.5 (21)
(3.0) (2.2) (0.0065)
3 x 230 V D/ 4.0 3.0 0.154
61R 2 3503 Y/D 8.2 / 4.2 50 / 40 84 85.2 83.8 0.81 0.87 0.9 1.15 12.5 (17)
460 V Y (3.0) (2.2) (0.0065)
4.0 3.0 0.154
61L 3 x 575 V D Y/D 2 3503 Y/D 3.5 26 83.8 85.8 85.0 0.78 0.85 0.89 1.15 15.5 (21)
(3.0) (2.2) (0.0065)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[[lb. (kg)]] starts per hour rise class
[in. (mm)] PN [°F (°C)]
145 (65.6) S-tube 2 (50) 10 20 IP68 H A 104 (40) 4-14

36
 10

Performance curves and technical data

Performance curves: SL1.20.A25.40.2.--.C

H H
[m] [ft] SL1.20.A25.40.2
90 60 Hz Eff
QH HI 11.6:2012 3B [%]
25
80 80

70 Eff 2 70
20
60 60
Eff 1
15 50 50

40 40
10
30 30

20 20
5
10 10

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 2½ / DN 65
0 2 4 6 8 10 12 14 16 18 v [ft/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
P P
[kW] [hp]
5
P1
3 4 P2 NPSH
[ft] [m]
3 30
2 8
2 20 6
1 4
1 10
NPSH 2

TM04 7834 4318

0 0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

5.1 4.0 0.154

60J 3 x 208 V D 2 3515 DOL 11.3 98 84.8 86.5 86.5 0.74 0.83 0.87 1.15 40.6 (55)
(3.8) (3.0) (0.0065)
3 x 230 V D/ 5.1 4.0 0.154
61R 2 3515 Y/D 10.8 / 5.7 80 / 60 85.3 85.9 85.5 0.8 0.86 0.89 1.15 20.6 (28)
460 V Y (3.8) (3.0) (0.0065)
5.1 4.0 0.154
61L 3 x 575 V D Y/D 2 3515 Y/D 4.3 37 84.8 86.5 86.5 0.74 0.83 0.87 1.15 40.6 (55)
(3.8) (3.0) (0.0065)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[[lb. (kg)]] starts per hour rise class
[in. (mm)] PN [°F (°C)]
207 (94.0) S-tube 2 (50) 10 20 IP68 H A 104 (40) 4-14

37
10
Performance curves and technical data

Performance curves: SL1.20.A25.55.2.--.C

H H
[m] [ft] SL1.20.A25.55.2
100 QH
30 60 Hz
HI 11.6:2012 3B
90
25 Eff
80
[%]
70 70
20
Eff 2
60 60

15 50 Eff 1 50

40 40
10
30 30

20 20
5
10 10

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 2½ / DN 65
0 2 4 6 8 10 12 14 16 18 v [ft/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
P P
[kW] [hp]
7
5 P1

6 NPSH
4 P2 [ft] [m]
5 30
8
3 4 20 6
4
3 NPSH 10
2 2

TM04 7835 4318

2 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.7 5.0 0.119

60J 3 x 208 V D 2 3535 DOL 15.0 166 82.0 85.0 86.0 0.76 0.84 0.88 1.15 41.3 (56)
(5.0) (4.0) (0.0050)
3 x 230 V D/ 6.7 5.0 0.119
61R 2 3535 Y/D 13.8 / 7.2 120 / 80 82.7 85.4 86.1 0.8 0.87 0.9 1.15 28.7 (56)
460 V Y (5.0) (4.0) (0.0050)
6.8 5.0 0.119
61L 3 x 575 V D Y/D 2 3535 Y/D 5.7 64 82.0 85.0 86.0 0.76 0.84 0.88 1.15 41.3 (56)
(5.0) (4.0) (0.0050)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
280 (127) S-tube 2 (50) 10 20 IP68 H A 104 (40) 4-14

38
 10

Performance curves and technical data

SL1.20.A30
Performance curves: SL1.20.A30.30.2.--.C

H H
[m] [ft] SL1.20.A30.30.2
25 60 Hz
80 Eff
HI 11.6:2012 3B [%]
70 70
QH
20
60 Eff 2 60

15 50 50

40 40
Eff 1
10
30 30

20 20
5
10 10

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]

3 4 P1
NPSH
[ft] [m]
3 P2 30
2 8

2 20 6

1 4
1 10
NPSH
2

TM04 7836 4318

0 0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

4.0 3.0 0.119

60J 3 x 208 V D 2 3503 DOL 8.6 68 83.8 85.8 85.0 0.78 0.85 0.89 1.15 15.5 (21)
(3.0) (2.2) (0.0050)
3 x 230 V D/ 4.0 3.0 0.119
61R 2 3503 Y/D 8.2 / 4.2 50 / 40 84 85.2 83.8 0.81 0.87 0.9 1.15 12.5 (17)
460 V Y (3.0) (2.2) (0.0050)
4.0 3.0 0.119
61L 3 x 575 V D Y/D 2 3503 Y/D 3.3 26 83.8 85.8 85.0 0.78 0.85 0.89 1.15 15.5 (21)
(3.0) (2.2) (0.0050)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
146 (66.4) S-tube 2 (50) 10 20 IP68 H A 104 (40) 4-14

39
10
Performance curves and technical data

Performance curves: SL1.20.A30.40.2.--.C

H H
[m] [ft] SL1.20.A30.40.2
90 60 Hz Eff
HI 11.6:2012 3B [%]
25 QH
80 80

70 70
Eff 2
20
60 60

15 50 Eff 1 50

40 40
10
30 30

20 20
5
10 10

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
5
P1

3 4 P2 NPSH
[ft] [m]
3 30
2 8
2 20 6
1 4
1 10
NPSH 2

TM04 7837 4318

0 0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

5.1 4.0 0.204

60J 3 x 208 V D 2 3515 DOL 11.3 98 84.8 86.5 86.5 0.74 0.83 0.87 1.15 40.6 (55)
(3.8) (3.0) (0.0086)
3 x 230 V D/ 5.1 4.0 0.204
61R 2 3515 Y/D 10.8 / 5.7 80 / 60 85.3 85.9 85.5 0.8 0.86 0.89 1.15 20.7 (28)
460 V Y (3.8) (3.0) (0.0086)
5.1 4.0 0.204
61L 3 x 575 V D Y/D 2 3515 Y/D 4.3 37 84.8 86.5 86.5 0.74 0.83 0.87 1.15 40.6 (55)
(3.8) (3.0) (0.0086)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
209 (94.8) S-tube 2 (50) 10 20 IP68 H A 104 (40) 4-14

40
 10

Performance curves and technical data

Performance curves: SL1.20.A30.55.2.--.C

H H
[m] [ft] SL1.20.A30.55.2
30 100 60 Hz
QH HI 11.6:2012 3B
90
25 Eff
80
[%]
70 70
20
60 Eff 2 60

15 50 50
Eff 1

40 40
10
30 30

20 20
5
10 10

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
7
5
P1
6 NPSH
4 P2 [ft] [m]
5 30
8
3 4 20 6
4
3 NPSH 10
2 2

TM04 7838 4318

2 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.7 5.0 0.204

60J 3 x 208 V D 2 3535 DOL 15.0 166 82.0 85.0 86.0 0.76 0.84 0.88 1.15 41.3 (56)
(5.0) (4.0) (0.0086)
3 x 230 V D/ 6.7 5.0 0.204
61R 2 3535 Y/D 13.8 / 7.2 120 / 80 82.7 85.4 86.1 0.8 0.87 0.9 1.15 28.8 (39)
460 V Y (5.0) (4.0) (0.0086)
6.8 5.0 0.204
61L 3 x 575 V D Y/D 2 3535 Y/D 5.7 64 82.0 85.0 86.0 0.76 0.84 0.88 1.15 41.3 (56)
(5.0) (4.0) (0.0086)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
282 (128) S-tube 2 (50) 10 20 IP68 H A 104 (40) 4-14

41
10
Performance curves and technical data

SL1.30.A30
Performance curves: SL1.30.A30.20.4.--.C

H H
[m] [ft] SL1.30.A30.20.4
40 60 Hz
12 Eff
HI 11.6:2012 3B [%]
35 QH 70
10
30 60

8
25 50

6 20 40

Eff 2
15 30
Eff 1
4
10 20

2
5 10

0 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 14 16 18 20 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 v [ft/s]
P P
[kW] [hp]
3.0
2.0
2.5
P1
1.5 2.0 NPSH
P2 [ft] [m]
1.5 10 3
1.0
2
1.0 5

TM04 7839 4318

NPSH 1
0.5
0.5 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

2.6 2.0 0.297

60J 3 x 208 V D DOL 4 1753 DOL 6.9 53 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.0125)
3 x 230 V D/ 2.6 2.0 0.297
61R 4 1753 Y/D 6.3 / 3.6 40 / 30 84.2 85.7 85.4 0.56 0.69 0.76 1.15 18.4 (25)
460 V Y (1.9) (1.5) (0.0125)
2.6 2.0 0.297
60L 3 x 575 V D DOL 4 1753 DOL 2.6 20 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.0125)
2.6 2.0 0.297
61L 3 x 575 V D Y/D 4 1753 Y/D 2.6 20 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.0125)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
220 (99.9) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

42
 10

Performance curves and technical data

Performance curves: SL1.30.A30.30.4.--.C

H H
[m] [ft] QH SL1.30.A30.30.4
14
45 60 Hz
HI 11.6:2012 3B
12 40 Eff
[%]
35 70
10
30 60

8
25 Eff 1 50

6 20 Eff 2 40

15 30
4
10 20
2
5 10

0 0 0
0 50 100 150 200 250 300 350 400 450 500 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 14 16 18 20 22 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 14 v [ft/s]
P P
[kW] [hp]
3.5
2.5
P1
3.0
2.0
2.5 P2

1.5 2.0 NPSH

[ft] [m]
1.5 10 3
1.0
2
1.0 NPSH 5
1

TM04 7840 4318

0.5
0.5 0 0
0 50 100 150 200 250 300 350 400 450 500 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

3.7 3.0 0.297

60J 3 x 208 V D 4 1763 DOL 9.2 70 84.7 86.6 87.0 0.59 0.70 0.76 1.15 26.6 (36)
(2.7) (2.2) (0.0125)
3 x 230 V D/ 3.7 3.0 0.297
61R 4 1763 Y/D 8.5 / 4.8 40 / 30 85.5 86.6 86.3 0.65 0.75 0.8 1.15 26.6 (36)
460 V Y (2.7) (2.2) (0.0125)
3.7 3.0 0.297
61L 3 x 575 V D Y/D 4 1763 Y/D 3.5 27 84.7 86.6 87.0 0.59 0.70 0.76 1.15 26.6 (36)
(2.7) (2.2) (0.0125)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
239 (109) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

43
10
Performance curves and technical data

Performance curves: SL1.30.A30.40.4.--.C

H H
[m] [ft] SL1.30.A30.40.4
14
45 60 Hz
QH HI 11.6:2012 3B
12 40 Eff
[%]
35 70
10
30 60

8
25 50

6 20 40

15 Eff 2 30
4
Eff 1
10 20
2
5 10

0 0 0
0 100 200 300 400 500 600 Q [US GPM]

0 5 10 15 20 25 30 35 40 Q [l/s]
ANSI 3 / DN 80
0 5 10 15 20 25 v [ft/s]
ANSI 4 / DN 100
0 5 10 15 v [ft/s]
P P
[kW] [hp]
6
4
5
P1

3 4
P2 NPSH
[ft] [m]
3 10 3
2
2
2 5
NPSH 1

TM04 7841 4318

1
1 0 0
0 100 200 300 400 500 600 Q [US GPM]

0 5 10 15 20 25 30 35 40 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

5.5 4.0 0.337

60J 3 x 208 D 4 1755 DOL 12.2 98 84.6 86.3 86.4 0.63 0.75 0.79 1.15 40.6 (55)
(4.0) (3.0) (0.0142)
3 x 230 V D/ 5.1 4.0 0.337
61R 4 1755 Y/D 11.4 / 6.2 75 / 50 85 86.0 85.6 0.70 0.79 0.82 1.15 32.5 (44)
460 V Y (3.7) (3.0) (0.0142)
5.1 4.0 0.337
61L 3 x 575 V D Y/D 4 1755 Y/D 4.7 37 84.6 86.3 86.4 0.63 0.75 0.79 1.15 40.6 (55)
(3.7) (3.0) (0.0142)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
289 (131) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

44
 10

Performance curves and technical data

Performance curves: SL1.30.A30.55.4.--.C

H H
[m] [ft] SL1.30.A30.55.4
25 60 Hz
80 Eff
HI 11.6:2012 3B [%]
70 70
20
60 QH 60

15 50 50

Eff 1
40 40
Eff 2
10
30 30

20 20
5
10 10

0 0 0
0 100 200 300 400 500 600 700 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 Q [l/s]
ANSI 3 / DN 80
0 5 10 15 20 25 30 v [ft/s]
ANSI 4 / DN 100
0 5 10 15 20 v [ft/s]
P P
[kW] [hp]
7
5 P1

6
4 P2
5

3 4 NPSH
[ft] [m]
3 10 3
2
2
2 5
NPSH 1

TM04 7842 4318

1
1 0 0
0 100 200 300 400 500 600 700 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.5 5.5 0.337

60J 3 x 208 V D 4 1767 DOL 16.8 133 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(4.8) (4.0) (0.0142)
3 x 230 V D/ 6.5 5.5 0.337
61R 4 1767 Y/D 15.4 / 8.6 120 / 80 86.2 87.8 87.8 0.59 0.70 0.78 1.15 48.7 (66)
460 V Y (4.8) (4.0) (0.0142)
6.5 5.5 0.337
61L 3 x 575 V D Y/D 4 1767 Y/D 6.4 51 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(4.8) (4.0) (0.0142)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
319 (145) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

45
10
Performance curves and technical data

Performance curves: SL1.30.A30.75.4.--.C

H H
[m] [ft] SL1.30.A30.75.4
25 60 Hz
80 Eff
HI 11.6:2012 3B [%]
70 70
QH
20
60 60

15 50 50

40 Eff 1 40
Eff 2
10
30 30

20 20
5
10 10

0 0 0
0 100 200 300 400 500 600 700 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
ANSI 3 / DN 80
0 5 10 15 20 25 30 35 v [ft/s]
ANSI 4 / DN 100
0 5 10 15 20 v [ft/s]
P P
[kW] [hp]
9 P1

6 8

7 P2 NPSH
5 [ft] [m]
6 15
4 4
5 10 3
NPSH
2
3 4 5
1

TM04 7843 4318

3 0 0
0 100 200 300 400 500 600 700 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

8.5 7.4 0.643

60J 3 x 208 V D 4 1765 DOL 19.3 149 88.9 90.0 89.6 0.73 0.81 0.86 1.15 73.0 (99)
(6.3) (5.5) (0.0271)
3 x 230 V D/ 8.7 7.4 0.643
61R 4 1765 Y/D 18.3 / 9.6 120 / 80 88.2 90.0 88.9 0.77 0.84 0.87 1.15 60.5 (82)
460 V Y (6.4) (5.5) (0.0271)
8.7 7.4 0.643
61L 3 x 575 V D Y/D 4 1765 Y/D 7.4 57 88.9 90.0 89.6 0.73 0.81 0.86 1.15 73.0 (99)
(6.4) (5.5) (0.0271)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
342 (155) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

46
 10

Performance curves and technical data

Performance curves: SL1.30.A30.100.4.--.C

H H
[m] [ft] SL1.30.A30.100.4
QH
90 60 Hz Eff
HI 11.6:2012 3B [%]
25
80 80

70 70
20
60 60

15 50 50
Eff 2
40 Eff 1 40
10
30 30

20 20
5
10 10

0 0 0
0 100 200 300 400 500 600 700 800 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 55 60 Q [l/s]
ANSI 3 / DN 80
0 5 10 15 20 25 30 35 40 v [ft/s]
ANSI 4 / DN 100
0 5 10 15 20 25 v [ft/s]
P P
[kW] [hp]
12
8
P1
10 NPSH
P2
[ft] [m]
6 8 15
4
6 10 3
4
NPSH
2
4 5
1

TM04 7844 4318

2
2 0 0
0 100 200 300 400 500 600 700 800 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 55 60 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[Hphp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

11.4 10.0 0.643

60J 3 x 208 V D 4 1766 DOL 26.1 205 91.0 91.4 91.0 0.71 0.81 0.85 1.15 118 (160)
(8.4) (7.5) (0.0271)
3 x 230 V D/ 11.6 10.0 0.643
61R 4 1766 Y/D 24.5 / 13.1 160 / 110 90.9 91.1 90.3 0.75 0.84 0.87 1.15 81.1 (110)
460 V Y (8.6) (7.5) (0.0271)
11.6 10.0 0.643
61L 3 x 575 V D Y/D 4 1766 Y/D 10.0 79 91.0 91.4 91.0 0.71 0.81 0.85 1.15 118 (160)
(8.6) (7.5) (0.0271)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
419 (190) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

47
10
Performance curves and technical data

SL1.30.A40
Performance curves: SL1.30.A40.20.4.--.C
H H
[m] [ft] SL1.30.A40.20.4
40 60 Hz
12 Eff
HI 11.6:2012 3B [%]
35 70
10
QH
30 60

8
25 50

6 20 40
Eff 2
15 Eff 1 30
4
10 20

2
5 10

0 0 0
0 100 200 300 400 Q [US GPM]

0 5 10 15 20 25 30 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 14 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 6 v [ft/s]
P P
[kW] [hp]
3.0
2.0
2.5
P1
1.5 2.0 NPSH
[ft] [m]
P2
1.5 10 3
1.0
2
1.0 NPSH 5

TM04 7845 4318

1
0.5
0.5 0 0
0 100 200 300 400 Q [US GPM]

0 5 10 15 20 25 30 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

2.6 2.0 0.361

60J 3 x 208 V D DOL 4 1753 DOL 6.9 53 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.0152)
3 x 230 V D/ 2.6 2.0 0.361
61R 4 1753 Y/D 6.3 / 3.6 40 / 30 84.2 85.7 85.4 0.56 0.69 0.76 1.15 18.4 (25)
460 V Y (1.9) (1.5) (0.0152)
2.6 2.0 0.361
60L 3 x 575 V D DOL 4 1753 DOL 2.6 20 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.0152)
2.6 2.0 0.361
61L 3 x 575 V D Y/D 4 1753 Y/D 2.6 20 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.0152)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
223 (101) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

48
 10

Performance curves and technical data

Performance curves: SL1.30.A40.30.4.--.C

H H
[m] [ft] SL1.30.A40.30.4
14
45 QH 60 Hz
HI 11.6:2012 3B
12 40 Eff
[%]
35 70
10
30 60

8
25 50

6 20 Eff 1 40
Eff 2
15 30
4
10 20
2
5 10

0 0 0
0 100 200 300 400 500 Q [US GPM]

0 5 10 15 20 25 30 35 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 14 16 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 6 7 v [ft/s]
P P
[kW] [hp]
3.5 P1
2.5

3.0
2.0 P2
2.5 NPSH
[ft] [m]
1.5 2.0 10 3
2
1.5 NPSH 5
1.0 1

TM04 7846 4318

1.0 0 0
0 100 200 300 400 500 Q [US GPM]

0 5 10 15 20 25 30 35 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

3.7 3.0 0.361

60J 3 x 208 V D 4 1763 DOL 9.2 70 84.7 86.6 87.0 0.59 0.70 0.76 1.15 26.6 (36)
(2.7) (2.2) (0.0152)
3 x 230 V D/ 3.7 3.0 0.361
61R 4 1763 Y/D 8.5 / 4.8 40 / 30 85.5 86.6 86.3 0.65 0.75 0.80 1.15 26.6 (36)
460 V Y (2.7) (2.2) (0.0152)
3.7 3.0 0.361
61L 3 x 575 V D Y/D 4 1763 Y/D 3.5 27 84.7 86.6 87.0 0.59 0.70 0.76 1.15 26.6 (36)
(2.7) (2.2) (0.0152)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
242 (110) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

49
10
Performance curves and technical data

Performance curves: SL1.30.A40.40.4.--.C

H H
[m] [ft] SL1.30.A40.40.4
14
45 60 Hz
QH HI 11.6:2012 3B
12 40 Eff
[%]
35 70
10
30 60

8
25 50

6 20 40

15 30
Eff 2
4
10 20
2 Eff 1
5 10

0 0 0
0 100 200 300 400 500 600 Q [US GPM]

0 5 10 15 20 25 30 35 40 45Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 14 16 18 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 6 7 8 v [ft/s]
P P
[kW] [hp]
6
4
5
P1
3 4 NPSH
P2 [ft] [m]
3 10 3
2
2
2 5
NPSH 1

TM04 7847 4318

1
1 0 0
0 100 200 300 400 500 600 Q [US GPM]

0 5 10 15 20 25 30 35 40 45Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

5.5 4.0 0.956

60J 3 x 208 V D 4 1755 DOL 12.2 98 84.6 86.3 86.4 0.63 0.75 0.79 1.15 40.6 (55)
(4.0) (3.0) (0.0403)
3 x 230 V D/ 5.1 4.0 0.956
61R 4 1755 Y/D 11.4 / 6.2 75 / 50 85.0 86.0 85.6 0.70 0.79 0.82 1.15 32.5 (44)
460 V Y (3.7) (3.0) (0.0403)
5.1 4.0 0.956
61L 3 x 575 V D Y/D 4 1755 Y/D 4.7 37 84.6 86.3 86.4 0.63 0.75 0.79 1.15 40.6 (55)
(3.7) (3.0) (0.0403)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
291 (132) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

50
 10

Performance curves and technical data

Performance curves: SL1.30.A40.55.4.--.C

H H
[m] [ft] SL1.30.A40.55.4
25 60 Hz
80 Eff
HI 11.6:2012 3B [%]
70 80
20
60 70
QH

15 50 60
Eff 2
40 50

10
30 Eff 1 40

20 30
5
10 20

0 0 10
0 100 200 300 400 500 600 700 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 14 16 18 20 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 6 7 8 9 v [ft/s]
P P
[kW] [hp]
7
5
P1
6
4 P2
5

3 4 NPSH
[ft] [m]
3 10 3
2
2
2 NPSH 5
1

TM04 7848 4318

1
1 0 0
0 100 200 300 400 500 600 700 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.5 5.5 0.956

60J 3 x 208 V D 4 1767 DOL 16.8 133 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(4.8) (4.0) (0.0403)
3 x 230 V D/ 6.5 5.5 0.956
61R 4 1767 Y/D 15.4 / 8.6 120 / 80 86.2 87.8 87.8 0.59 0.70 0.78 1.15 48.7 (66)
460 V Y (4.8) (4.0) (0.0403)
6.5 5.5 0.956
61L 3 x 575 V D Y/D 4 1767 Y/D 6.4 51 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(4.8) (4.0) (0.0403)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
321 (145) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

51
10
Performance curves and technical data

Performance curves: SL1.30.A40.75.4.--.C

H H
[m] [ft] SL1.30.A40.75.4
25 60 Hz
80 Eff
HI 11.6:2012 3B [%]
70 QH 70
20
60 60

15 50 50
Eff 2
40 40

10
30 30
Eff 1

20 20
5
10 10

0 0 0
0 100 200 300 400 500 600 700 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 14 16 18 20 22 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 6 7 8 9 10 v [ft/s]
P P
[kW] [hp]
9

6 8
P1
7 NPSH
5 [ft] [m]
P2
6 15
4 4
5 10 3
NPSH
2
3 4 5
1

TM04 7849 4318

3 0 0
0 100 200 300 400 500 600 700 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

8.5 7.5 0.482

60J 3 x 208 V D 4 1765 DOL 19.3 149 88.9 90.0 89.6 0.73 0.81 0.86 1.15 73 (99)
(6.3) (5.5) (0.0203)
3 x 230 V D / 8.7 7.5 0.482
61R 4 1765 Y/D 18.3 / 9.6 120 / 80 89.2 90.0 88.9 0.77 0.84 0.87 1.15 60.5 (82)
460 V (6.4) (5.5) (0.0203)
8.7 7.5 0.482
61L 3 x 575 V D Y/D 4 1765 Y/D 7.4 57 88.9 90.0 89.6 0.73 0.81 0.86 1.15 73 (99)
(6.4) (5.5) (0.0203)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
344 (156) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

52
 10

Performance curves and technical data

Performance curves: SL1.30.A40.100.4.--.C

H H
[m] [ft] SL1.30.A40.100.4
90 60 Hz
QH
HI 11.6:2012 3B
25
80 Eff
[%]
70 70
20
60 60
Eff 2

15 50 50

Eff 1
40 40
10
30 30

20 20
5
10 10

0 0 0
0 100 200 300 400 500 600 700 800 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 55 60 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 14 16 18 20 22 24 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 6 7 8 9 10 11 v [ft/s]
P P
[kW] [hp]
12
8
10 P1
NPSH
P2 [ft] [m]
6 8 15
4
6 10 3
4
NPSH 2
4 5
1

TM04 7850 4318

2
2 0 0
0 100 200 300 400 500 600 700 800 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 55 60 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

11.4 10.0 0.458

60J 3 x 208 V D 4 1766 DOL 26.1 205 91.0 91.4 91.0 0.71 0.81 0.85 1.15 118 (160)
(8.4) (7.5) (0.0193)
3 x 230 V D/ 11.6 10.0 0.458
61R 4 1766 Y/D 24.5 / 13.1 160 / 110 90.9 91.1 90.3 0.75 0.84 0.87 1.15 81.1 (110)
460 V Y (8.6) (7.5) (0.0193)
11.6 10.0 0.458
61L 3 x 575 V D Y/D 4 1766 Y/D 10.0 79 91.0 91.4 91.0 0.71 0.81 0.85 1.15 118 (160)
(8.6) (7.5) (0.0193)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
421 (191) S-tube 3 (80) 10 20 IP68 H A 104 (40) 4-14

53
10
Performance curves and technical data

SL1.40.A40
Performance curves: SL1.40.A40.55.4.--.C

H H
[m] [ft] SL1.40.A40.55.4
14
45 60 Hz
QH
HI 11.6:2012 3B
12 40 Eff
[%]
35 70
10 Eff 2
30 60

8
25 50

6 20 40
Eff 1
15 30
4
10 20
2
5 10

0 0 0
0 100 200 300 400 500 600 700 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 14 16 18 20 22 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 6 7 8 9 10 v [ft/s]
P P
[kW] [hp]
7
5
P1
6
4 P2
5

3 4 NPSH
[ft] [m]
3 20 6
2
4
2 NPSH 10

TM04 7851 4318

2
1
1 0 0
0 100 200 300 400 500 600 700 Q [US GPM]

0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.5 5.5
60J 3 x 208 V D 4 1767 DOL 16.8 133 85.3 87.4 88.2 0.53 0.66 0.74 1.15 1.4 (0.0590) 61.2 (83)
(4.8) (4.0)
3 x 230 V D/ 6.5 5.5
61R 4 1767 Y/D 15.4 / 8.6 120 / 80 86.2 87.8 87.8 0.59 0.70 0.78 1.15 1.4 (0.0590) 48.7 (66)
460 V Y (4.8) (4.0)
6.5 5.5
61L 3 x 575 V D Y/D 4 1767 Y/D 6.4 51 85.3 87.4 88.2 0.53 0.66 0.74 1.15 1.4 (0.0590) 61.2 (83)
(4.8) (4.0)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
332 (151) S-tube 4 (100) 10 20 IP68 H A 104 (40) 4-14

54
 10

Performance curves and technical data

Performance curves: SL1.40.A40.75.4.--.C

H H
[m] [ft]
SL1.40.A40.75.4
55 60 Hz
16 QH
50 HI 11.6:2012 3B

14 45

40 Eff
12 [%]
35 70
10
30 60
Eff 2
8
25 50
Eff 1
6 20 40

15 30
4
10 20
2
5 10

0 0 0
0 200 400 600 800 Q [US GPM]

0 10 20 30 40 50 60 Q [l/s]
ANSI 4 / DN 100
0 5 10 15 20 25 v [ft/s]
ANSI 6 / DN 150
0 2 4 6 8 10 12 v [ft/s]
P P
[kW] [hp]
9
P1
6 8
P2
7
5

6 NPSH
4 [ft] [m]
5 20 6
4
3 4 NPSH 10
2

TM04 7852 4318

3 0 0
0 200 400 600 800 Q [US GPM]

0 10 20 30 40 50 60 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

8.5 7.5
60J 3 x 208 V D 4 1765 DOL 19.3 149 88.9 90.0 89.6 0.73 0.81 0.86 1.15 1.4 (0.0590) 73 (99)
(6.3) (5.5)
3 x 230 V D/ 8.7 7.5
61R 4 1765 Y/D 18.3 / 9.6 120 / 80 89.2 90.0 88.9 0.77 0.84 0.87 1.15 1.4 (0.0590) 60.5 (82)
460 V Y (6.4) (5.5)
8.7 7.5
61L 3 x 575 V D Y/D 4 1765 Y/D 7.4 57 88.9 90.0 89.6 0.73 0.81 0.86 1.15 1.4 (0.0590) 73 (99)
(6.4) (5.5)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
357 (162) S-tube 4 (100) 10 20 IP68 H A 104 (40) 4-14

55
10
Performance curves and technical data

Performance curves: SL1.40.A40.100.4.--.C

H H
[m] [ft] SL1.40.A40.100.4
60 Hz
70
QH HI 11.6:2012 3B Eff
20 [%]
60 80

15 50 70

40 Eff 2 60

10
30 Eff 1 50

20 40
5

10 30

0 0 20
0 200 400 600 800 1000 Q [US GPM]

0 10 20 30 40 50 60 70 Q [l/s]
ANSI 4 / DN 100
0 5 10 15 20 25 30 v [ft/s]
ANSI 6 / DN 150
0 2 4 6 8 10 12 14 v [ft/s]
P P
[kW] [hp]
12
P1
8 11 NPSH
[ft] [m]
10 P2 40 12
7
10
9 30
8
6 8 20 6
NPSH 4
7 10
5 2

TM04 7853 4318

6 0 0
0 200 400 600 800 1000 Q [US GPM]

0 10 20 30 40 50 60 70 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

11.4 10.0 1.163

60J 3 x 208 V D 4 1766 DOL 26.1 205 91.0 91.4 91.0 0.71 0.81 0.85 1.15 118 (160)
(8.4) (7.5) (0.0490)
3 x 230 V D/ 11.6 10.0 1.163
61R 4 1766 Y/D 24.5 / 13.1 160 / 110 90.9 91.1 90.3 0.75 0.84 0.87 1.15 81.1 (110)
460 V Y (8.6) (7.5) (0.0490)
11.6 10.0 1.163
61L 3 x 575 V D Y/D 4 1766 Y/D 10.0 79 91.0 91.4 91.0 0.71 0.81 0.85 1.15 118 (160)
(8.6) (7.5) (0.0490)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
416 (189) S-tube 4 (100) 10 20 IP68 H A 104 (40) 4-14

56
 10

Performance curves and technical data

SL1.40.A60
Performance curves: SL1.40.A60.55.4.--.C

H H
[m] [ft] SL1.40.A60.55.4
14
45 60 Hz
HI 11.6:2012 3B
QH
12 40 Eff
[%]
35 70
10
30 60

8
25 Eff 2 50

6 20 Eff 1
40

15 30
4
10 20
2
5 10

0 0 0
0 200 400 600 800 Q [US GPM]

0 10 20 30 40 50 60 Q [l/s]
ANSI 6 / DN 150
0 2 4 6 8 10 12 v [ft/s]
ANSI 8 / DN 200
0 1 2 3 4 5 6 7 v [ft/s]
P P
[kW] [hp]
7
5
P1
6
4 P2
5

3 4 NPSH
[ft] [m]
3 20 6
2
4
2 NPSH 10

TM04 7854 4318

2
1
1 0 0
0 200 400 600 800 Q [US GPM]

0 10 20 30 40 50 60 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.5 5.5 1.692

60J 3 x 208 V D 4 1767 DOL 16.8 133 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(4.8) (4.0) (0.0713)
3 x 230 V D/ 6.5 5.5 1.692
61R 4 1767 Y/D 15.4 / 8.6 120 / 80 86.2 87.8 87.8 0.59 0.70 0.78 1.15 48.7 (66)
460 V Y (4.8) (4.0) (0.0713)
6.5 5.5 1.692
61L 3 x 575 V D Y/D 4 1767 Y/D 6.4 51 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(4.8) (4.0) (0.0713)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
339 (154) S-tube 4 (100) 10 20 IP68 H A 104 (40) 4-14

57
10
Performance curves and technical data

Performance curves: SL1.40.A60.75.4.--.C

H H
[m] [ft] SL1.40.A60.75.4
55 60 Hz
16 QH
50 HI 11.6:2012 3B

14 45

40 Eff
12 [%]
35 70
10
30 60
8 Eff 2
25 50
Eff 1
6 20 40

15 30
4
10 20
2
5 10

0 0 0
0 200 400 600 800 1000 Q [US GPM]

0 10 20 30 40 50 60 70 Q [l/s]
ANSI 6 / DN 150
0 2 4 6 8 10 12 14 v [ft/s]
ANSI 8 / DN 200
0 1 2 3 4 5 6 7 8 v [ft/s]
P P
[kW] [hp]
9
P1
6 8
P2
7
5

6 NPSH
4 [ft] [m]
5 20 6
4
3 4 NPSH 10
2

TM04 7855 4318

3 0 0
0 200 400 600 800 1000 Q [US GPM]

0 10 20 30 40 50 60 70 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

8.5 7.5 1.692

60J 3 x 208 V D 4 1765 DOL 19.3 149 88.9 90.0 89.6 0.73 0.81 0.86 1.15 73 (99)
(6.3) (5.5) (0.0713)
3 x 230 V D/ 8.7 7.5 1.692
61R 4 1765 Y/D 18.3 / 9.6 120 / 80 89.2 90.0 88.9 0.77 0.84 0.87 1.15 60.5 (82)
460 V Y (6.4) (5.5) (0.0713)
8.7 7.5 1.692
61L 3 x 575 V D Y/D 4 1765 Y/D 7.4 57 88.9 90.0 89.6 0.73 0.81 0.86 1.15 73 (99)
(6.4) (5.5) (0.0713)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
363 (165) S-tube 4 (100) 10 20 IP68 H A 104 (40) 4-14

58
 10

Performance curves and technical data

Performance curves: SL1.40.A60.100.4.--.C

H H
[m] [ft] SL1.40.A60.100.4
25 60 Hz
80 Eff
HI 11.6:2012 3B [%]
70 80
20 QH

60 70

15 50 60
Eff 2
Eff 1
40 50

10
30 40

20 30
5
10 20

0 0 10
0 200 400 600 800 1000 1200 Q [US GPM]

0 10 20 30 40 50 60 70 80 90Q [l/s]
ANSI 6 / DN 150
0 2 4 6 8 10 12 14 16 v [ft/s]
ANSI 8 / DN 200
0 1 2 3 4 5 6 7 8 9 v [ft/s]
P P
[kW] [hp]
12

11 P1 NPSH
8
[ft] [m]
10 40 12
P2
7
10
9 30
8
6 8 20 6
4
7 NPSH 10
5 2

TM04 7856 4318

6 0 0
0 200 400 600 800 1000 1200 Q [US GPM]

0 10 20 30 40 50 60 70 80 90Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

11.4 10.0 2.143

60J 3 x 208 V D 4 1766 DOL 26.1 205 91.0 91.4 91.0 0.71 0.81 0.85 1.15 118 (160)
(8.4) (7.5) (0.0903)
3 x 230 V D/ 11.6 10.0 2.143
61R 4 1766 Y/D 24.5 / 13.1 160 / 110 90.9 91.1 90.3 0.75 0.84 0.87 1.15 81.1 (110)
460 V Y (8.6) (7.5) (0.0903)
11.6 10.0 2.143
61L 3 x 575 V D Y/D 4 1766 Y/D 10.0 79 91.0 91.4 91.0 0.71 0.81 0.85 1.15 118 (160)
(8.6) (7.5) (0.0903)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
426 (193) S-tube 4 (100) 10 20 IP68 H A 104 (40) 4-14

59
10
Performance curves and technical data

SLV.25.A25
Performance curves: SLV.25.A25.30.2.--.C

H H
[m] [ft] SLV.25.A25.30.2
60 Hz
70
HI 11.6:2012 3B Eff
20 [%]
60 35
QH

15 50 30

40 25

10
30 20

20 15
5

10 10
Eff 2
Eff 1
0 0 5
0 50 100 150 200 Q [US GPM]

0 2 4 6 8 10 12 14 16 Q [l/s]
Ansi 2½ / DN 65
0 2 4 6 8 10 12 14 16 v [ft/s]
ANSI 3 / DN 80
0 2 4 6 8 10 v [ft/s]
P P
[kW] [hp]
P1
3 4

P2
3
2 NPSH
[ft] [m]
2 20 6

1 4
1 10
NPSH 2

TM04 7249 4318

0 0 0 0
0 50 100 150 200 Q [US GPM]

0 2 4 6 8 10 12 14 16 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

4.0 3.0 0.135

60J 3 x 208 V D 2 3503 DOL 8.6 68 83.8 85.8 85.0 0.78 0.85 0.89 1.15 15.5 (21)
(3.0) (2.2) (0.0057)
3 x 230 V D/ 4.0 3.0 0.135
61R 2 3503 Y/D 8.2 / 4.2 50 / 40 84.0 85.2 83.8 0.81 0.87 0.90 1.15 12.5 (17
460 V Y (3.0) (2.2) (0.0057)
4.0 3.0 0.135
61L 3 x 575 V D Y/D 2 3503 Y/D 3.3 26 83.8 85.8 85.0 0.78 0.85 0.89 1.15 15.5 (21)
(3.0) (2.2) (0.0057)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
144 (65.2) SuperVortex 2.5 (65) 10 20 IP68 H A 104 (40) 4-14

60
 10

Performance curves and technical data

Performance curves: SLV.25.A25.40.2.--.C

H H
[m] [ft] SLV.25.A25.40.2
QH 60 Hz
70
HI 11.6:2012 3B Eff
20 [%]
60 35

15 50 30

40 25

10
30 20

20 15
5

10 Eff 2 10
Eff 1

0 0 5
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 2½ / DN 65
0 2 4 6 8 10 12 14 16 18 v [ft/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
P P
[kW] [hp]
5 P1

P2
3 4

3 NPSH
2
[ft] [m]
2 20 6
1 4
1 10
NPSH 2

TM04 7250 4318

0 0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

5.1 4.0 0.135

60J 3 x 208-230 V D 2 3515 DOL 11.3 98 84.8 86.5 86.5 0.74 0.83 0.87 1.15 40.6 (55)
(3.8) (3.0) (0.0057)
3 x 230 V D/ 5.1 4.0 0.135
61R 2 3515 Y/D 10.8 / 5.7 80 / 60 85.3 85.9 85.5 0.80 0.86 0.89 1.15 20.7 (28)
460 V Y (3.8) (3.0) (0.0057)
5.1 4.0 0.135
61L 3 x 575 V D Y/D 2 3515 Y/D 4.3 37 84.8 86.5 86.5 0.74 0.83 0.87 1.15 40.6 (55)
(3.8) (3.0) (0.0057)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
207 (93.7) SuperVortex 2.5 (65) 10 20 IP68 H A 104 (40) 4-14

61
10
Performance curves and technical data

Performance curves: SLV.25.A25.55.2.--.C

H H
[m] [ft] SLV.25.A25.55.2
30 100 60 Hz
QH
HI 11.6:2012 3B
90 Eff
[%]
25
80 40

70 35
20
60 Eff 2 30

15 50 25
Eff 1

40 20
10
30 15

20 10
5
10 5

0 0 0
0 40 80 120 160 Q [US GPM]

0 2 4 6 8 10 12 Q [l/s]
ANSI 2½ / DN 65
0 2 4 6 8 10 12 v [ft/s]
ANSI 3 / DN 80
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
5 7
P1
6
4 P2
5

3 4 NPSH
[ft] [m]
3 15
2 4
2 10
1 NPSH 2
1 5

TM04 7251 4318

0 0 0 0
0 40 80 120 160 Q [US GPM]

0 2 4 6 8 10 12 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.7 5.5 0.342

60J 3 x 208 V D 2 3535 DOL 15.0 166 82.0 85.0 86.0 0.76 0.84 0.88 1.15 41.3 (56)
(5.0) (4.0) (0.0144)
3 x 230 V D/ 6.7 5.5 0.342
61R 2 3535 Y/D 13.8 / 7.2 120 / 80 82.7 85.4 861 0.80 0.87 0.90 1.15 28.8 (39)
460 V Y (5.0) (4.0) (0.0144)
6.8 5.5 0.342
61L 3 x 575 V D Y/D 2 3535 Y/D 5.7 64 82.0 85.0 86.0 0.76 0.84 0.88 1.15 41.3 (56)
(5.0) (4.0) (0.0144)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
258 (117) SuperVortex 2.5 (65) 10 20 IP68 H A 104 (40) 4-14

62
 10

Performance curves and technical data

SLV.25.A30
Performance curves: SLV.25.A30.30.2.--.C

H H
[m] [ft]
60
SLV.25.A30.30.2
18 60 Hz
55 QH HI 11.6:2012 3B
16
50
14 Eff
45
[%]
12 40 32

35 28
10
30 24
8
25 20

6 20 16

15 12
4
10 Eff 2 8
Eff 1
2
5 4

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
5

P1
3 4 NPSH
[ft] [m]
P2
3 30
2 8
2 20 6
1 4
1 10
NPSH

TM04 7252 4318

2
0 0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

4.0 3.0 0.342

60J 3 x 208 V D 2 3503 DOL 8.6 68 83.8 85.8 85.0 0.78 0.85 0.89 1.15 15.5 (21)
(3.0) (2.2) (0.0144)
3 x 230 V D/ 4.0 3.0 0.342
61R 2 3503 Y/D 8.2 / 4.2 50 / 40 84.0 85.2 83.8 0.81 0.87 0.90 1.15 12.5 (17)
460 V Y (3.0) (2.2) (0.0144)
4.0 3.0 0.342
61L 3 x 575 V D Y/D 2 3503 Y/D 3.3 26 83.8 85.8 85.0 0.78 0.85 0.89 1.15 15.5 (21)
(3.0) (2.2) (0.0144)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
146 (66.3) SuperVortex 2.5 (65) 10 20 IP68 H A 104 (40) 4-14

63
10
Performance curves and technical data

Performance curves: SLV.25.A30.40.2.--.C

H H
[m] [ft] SLV.25.A30.40.2
25 60 Hz
80 Eff
HI 11.6:2012 3B [%]
70 35
QH
20
60 30

15 50 25

40 20

10
30 15

20 10
5
10 5
Eff 2
Eff 1
0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
P1
5
P2
3 4

3 NPSH
2
[ft] [m]
2 20 6
1 4
1 10
NPSH 2

TM04 7253 4318

0 0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

5.1 4.0 0.342

60J 3 x 208 V D 2 3515 DOL 11.3 98 84.8 86.5 86.5 0.74 0.83 0.87 1.15 40.6 (55)
(3.8) (3.0) (0.0144)
3 x 230 V D/ 5.1 4.0 0.342
61R 2 3515 Y/D 10.8 / 5.7 80 / 60 85.3 85.9 85.5 0.80 0.86 0.89 1.15 20.7 (28)
460 V Y (3.8) (3.0) (0.0144)
5.1 4.0 0.342
61L 3 x 575 V D Y/D 2 3515 Y/D 4.3 37 84.8 86.5 86.5 0.74 0.83 0.87 1.15 40.6 (55)
(3.8) (3.0) (0.0144)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
209 (94.8) SuperVortex 2.5 (65) 10 20 IP68 H A 104 (40) 4-14

64
 10

Performance curves and technical data

Performance curves: SLV.25.A30.55.2.--.C

H H
[m] [ft] SLV.25.A30.55.2
90 QH 60 Hz
HI 11.6:2012 3B
25
80 Eff
[%]
70 35
20
60 30

15 50 25

40 20
10
30 Eff 2 15

Eff 1
20 10
5
10 5

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
7 P1
5

6
4 P2
5 NPSH
[ft] [m]
3 4 30
8
3 20 6
2
4
2 10
NPSH 2

TM04 7254 4318

1
1 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.7 5.5 0.318

60J 3 x 208 V D 2 3535 DOL 15.0 166 82.0 85.0 86.0 0.76 0.84 0.88 1.15 41.3 (56)
(5.0) (4.0) (0.0134)
3 x 230 V D/ 6.7 5.5 0.318
61R 2 3535 Y/D 13.8 / 7.2 120 / 80 82.7 85.4 86.1 0.80 0.87 0.90 1.15 28.8 (39)
460 V Y (5.0) (4.0) (0.0134)
6.8 5.5 0.318
61L 3 x 575 V D Y/D 2 3535 Y/D 5.7 64 82.0 85.0 86.0 0.76 0.84 0.88 1.15 41.3 (56)
(5.0) (4.0) (0.0134)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
259 (118) SuperVortex 2.5 (65) 10 20 IP68 H A 104 (40) 4-14

65
10
Performance curves and technical data

SLV.30.A30
Performance curves: SLV.30.A30.15.4.--.C
H H
[m] [ft] SLV.30.A30.15.4
10 60 Hz
32 Eff
HI 11.6:2012 3B [%]
28 40
8 QH
24 35

6 20 30

16 25

4
12 20

Eff 2
8 15
2
Eff 1
4 10

0 0 5
0 50 100 150 200 Q [US GPM]

0 2 4 6 8 10 12 14 16 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 v [ft/s]
P P
[kW] [hp]
2.5

1.5 2.0
P1

1.5 NPSH
1.0 P2
[ft] [m]
1.0 10 3
0.5 2
0.5 5
NPSH

TM04 7255 4318

1
0.0 0.0 0 0
0 50 100 150 200 Q [US GPM]

0 2 4 6 8 10 12 14 16 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

2.0 1.5 2.143

60J 3 x 208 V D DOL 4 1754 DOL 5.2 33 81.0 84.2 84.6 0.52 0.65 0.72 1.15 17.7 (24)
(1.5) (1.1) (0.0903)
3 x 230 V D/ 2.0 1.5 2.143
61R 4 1754 Y/D 4.8 / 2.7 28 / 20 82.2 84.3 84.0 0.57 0.70 0.76 1.15 217.7 (24)
460 V Y (1.5) (1.1) (0.0903)
2.0 1.5 2.143
60L 3 x 575 V D DOL 4 1754 DOL 2.0 13 81.0 84.2 84.6 0.52 0.65 0.72 1.15 17.7 (24)
(1.5) (1.1) (0.0903)
2.0 1.5 2.143
61L 3 x 575 V D Y/D 4 1754 Y/D 2.0 13 81.0 84.2 84.6 0.52 0.65 0.72 1.15 17.7 (24)
(1.5) (1.1) (0.0903)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
204 (92.4) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

66
 10

Performance curves and technical data

Performance curves: SLV.30.A30.18.4.--.C

H H
[m] [ft] SLV.30.A30.18.4
10 60 Hz
32 Eff
QH HI 11.6:2012 3B [%]
28 40
8
24 35

6 20 30

16 25

4
12 20
Eff 2

8 15
2 Eff 1

4 10

0 0 5
0 50 100 150 200 Q [US GPM]

0 2 4 6 8 10 12 14 16 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 v [ft/s]
p P
[kW] [hp]
2.5

P1
1.5 2.0

P2
1.5 NPSH
1.0
[ft] [m]
1.0 10 3
0.5 NPSH 2
0.5 5
1

TM04 7256 4318

0.0 0.0 0 0
0 50 100 150 200 Q [US GPM]

0 2 4 6 8 10 12 14 16 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

2.4 1.8 1.241

60J 3 x 208V D DOL 4 1753 DOL 6.4 53 82.0 85.2 86.0 0.30 0.39 0.46 1.15 22.1 (30)
(1.8) (1.3) (0.0523)
3 x 230 V D/ 2.4 1.8 1.241
61R 4 1753 Y/D 5.7 / 3.3 40 / 30 82.8 85.3 85.8 0.52 0.65 0.72 1.15 18.4 (25)
460 V Y (1.8) (1.3) (0.0523)
2.4 1.8 1.241
60L 3 x 575 V D DOL 4 1753 DOL 2.5 20 82.0 85.2 86.0 0.30 0.39 0.46 1.15 22.1 (30)
(1.8) (1.3) (0.0523)
2.4 1.8 1.241
61L 3 x 575 V D Y/D 4 1753 Y/D 2.5 20 82.0 85.2 86.0 0.30 0.39 0.46 1.15 22.1 (30)
(1.8) (1.3) (0.0523)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
211 (95.8) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

67
10
Performance curves and technical data

Performance curves: SLV.30.A30.20.4.--.C

H H
[m] [ft] SLV.30.A30.20.4
36 60 Hz Eff
QH
HI 11.6:2012 3B [%]
10
32 45

28 40
8
24 35

6 20 30

16 25
4
12 Eff 2 20

8 Eff 1 15
2
4 10

0 0 5
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
3.0
2.0
2.5 P1

1.5 2.0 P2

1.5 NPSH
1.0 [ft] [m]
1.0 10 3
0.5 NPSH
2
0.5 5
1

TM04 7257 4318

0.0 0.0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

2.6 2.0 1.217

60J 3 x 208 V D DOL 4 1753 DOL 6.9 53 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.0513)
3 x 230 V D/ 2.6 2.0 1.217
61R 4 1753 Y/D 6.3 / 3.6 40 84.2 85.7 85.4 0.56 0.69 0.76 1.15 18.4 (25)
460 V Y (1.9) (1.5) (0.0513)
2.6 2.0 1.217
60L 3 x 575 V D DOL 4 1753 DOL 2.6 20 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.0513)
2.6 2.0 1.217
61L 3 x 575 V D Y/D 4 1753 Y/D 2.6 20 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.0513)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
212 (96) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

68
 10

Performance curves and technical data

Performance curves: SLV.30.A30.30.4.--.C

H H
[m] [ft] SLV.30.A30.30.4
50 60 Hz
QH
14 HI 11.6:2012 3B
45 Eff
[%]
12 40 50

35 45
10
30 40
8
25 35
Eff 2
6 20 30
Eff 1
15 25
4
10 20
2
5 15

0 0 10
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v[ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v[ft/s]
P P
[kW] [hp] P1
2.5 3.5
3.0 P2
2.0
2.5

1.5 2.0 NPSH

[ft] [m]
1.5 15
1.0 4
1.0 10 3
0.5 2
0.5 NPSH 5
1

TM04 7258 4318

0.0 0.0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

3.7 3.0 1.265

60J 3 x 208 V D 4 1763 DOL 9.28 70 84.7 86.6 87.0 0.59 0.70 0.76 1.15 26.6 (36)
(2.7) (2.2) (0.0533)
3 x 230 V D/ 3.7 3.0 1.265
61R 4 1763 Y/D 8.5 / 4.8 40 / 30 85.5 86.6 86.3 0.65 0.75 0.80 1.15 26.6 (36)
460 V Y (2.7) (2.2) (0.0533)
3.7 3.0 1.265
61L 3 x 575 V D Y/D 4 1763 Y/D 3.5 27 84.7 86.6 87.0 0.59 0.70 0.76 1.15 26.6 (36)
(2.7) (2.2) (0.0533)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
228 (103) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

69
10
Performance curves and technical data

Performance curves: SLV.30.A30.55.2.--.C

H H
[m] [ft] SLV.30.A30.55.2
60 Hz
70
HI 11.6:2012 3B Eff
20 QH [%]
60 30

15 50 25

40 20

10
30 15
Eff 2
20 10
Eff 1
5

10 5

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
7 P1
5

6
P2
4
5 NPSH
[ft] [m]
3 4 30
8
3 20 6
2
4
2 10
2

TM04 7259 4318

NPSH
1
1 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.7 5.5 2.176

61J 3 x 208 V D 2 1767 Y/D 15.0 166 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(5.0) (4.0) (0.0917)
3 x 230 V D/ 6.7 5.5 2.176
61R 2 1767 Y/D 13.8 / 7.2 120 / 80 86.2 86.2 87.8 0.59 0.70 0.78 1.15 48.7 (66)
460 V Y (5.0) (4.0) (0.0917)
6.8 5.5 2.176
61L 3 x 575 V D Y/D 2 1767 Y/D 5.7 64 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(5.0) (4.0) (0.0917)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
268 (122) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

70
 10

Performance curves and technical data

Performance curves: SLV.30.A30.55.4.--.C

H H
[m] [ft] SLV.30.A30.55.4
60 Hz
70
HI 11.6:2012 3B
20
60 QH
Eff
[%]
15 50 50

40 Eff 2 40

10
30 Eff 1 30

20 20
5

10 10

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
7
5
P1
6
4 P2
5

3 4 NPSH
[ft] [m]
3 20 6
2
4
2 10
2

TM04 7260 4318

1 NPSH
1 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.5 5.5 0.318

61J 3 x 208 V D 4 3535 Y/D 16.8 133 85.3 87.4 88.2 0.53 0.66 0.74 1.15 83
(4.8) (4.0) (0.0134)
3 x 230 V D/ 6.5 5.5 0.318
61R 4 3535 Y/D 15.4 / 8.6 120 / 80 85.3 87.4 88.2 0.53 0.66 0.74 1.15 83
460 V Y (4.8) (4.0) (0.0134)
6.5 5.5 0.318
61L 3 x 575 V D Y/D 4 3535 Y/D 6.4 51 85.3 87.4 88.2 0.53 0.66 0.74 1.15 83
(4.8) (4.0) (0.0134)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
294 (133) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

71
10
Performance curves and technical data

Performance curves: SLV.30.A30.80.2.--.C

H H
[m] [ft] SLV.30.A30.80.2
90 QH 60 Hz
HI 11.6:2012 3B
25
80 Eff
[%]
70 35
20
60 30

15 50 25
Eff 2
40 Eff 1 20
10
30 15

20 10
5
10 5

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
10
7 P1
9
P2
6 8

7 NPSH
5 [ft] [m]
6 30
4 8
5 20 6
4
3 4 NPSH 10
2

TM04 7261 4318

3 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

9.8 8.0 0.318

60J 3 x 208 V D 2 3549 DOL 22.5 215 89.5 89.7 90.2 0.70 0.79 0.83 1.15 62.7 (85)
(7.2) (6.0) (0.0134)
3 x 230 V D/ 9.8 8.0 0.318
61R 2 3549 Y/D 20.4 / 10.9 170 / 120 89.8 90.8 90.7 0.75 0.84 0.837 1.15 36.9 (50)
460 V Y (7.2) (6.0) (0.0134)
9.8 8.0 0.318
61L 3 x 575 V D Y/D 2 3549 Y/D 8.6 82 89.5 89.7 90.2 0.70 0.79 0.83 1.15 62.7 (85)
(7.2) (6.0) (0.0134)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
302 (137) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

72
 10

Performance curves and technical data

Performance curves: SLV.30.A30.100.2.--.C

H H
[m] [ft]
120 QH
SLV.30.A30.100.2
35 60 Hz
110 HI 11.6:2012 3B

30 100
Eff
90
[%]
25 80 40

70 35
20
60 30
Eff 2
15 50 25
Eff 1
40 20
10
30 15

20 10
5
10 5

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
12
P1
8 11
P2
10
7
9
6 8 NPSH
[ft] [m]

5 7 20 6
4
6 NPSH 10
2

TM04 7262 4318

4
5 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

11.8 10.0 0.346

60J 3 x 208 V D 2 3533 DOL 27.0 215 90.3 90.8 90.1 0.74 0.82 0.86 1.15 62.7 (85)
(8.7) (7.5) (0.0146)
3 x 230 V D/ 12.0 10.0 0.346
61R 2 3533 Y/D 25 / 13 170 / 120 90.4 90.6 89.6 0.80 0.86 0.89 1.15 36.9 (50)
460 V Y (8.8) (7.5) (0.0146)
12.0 10.0 0.346
61L 3 x 575 V D Y/D 2 3533 Y/D 10.3 82 90.3 90.8 90.1 0.74 0.82 0.86 1.15 62.7 (85)
(8.8) (7.5) (0.0146)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
303 (137) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

73
10
Performance curves and technical data

Performance curves: SLV.30.A30.125.2.--.C

H H
[m] [ft] SLV.30.A30.125.2
60 Hz
140
QH HI 11.6:2012 3B Eff
40 [%]
120 35

30 100 30
Eff 2
Eff 1
80 25

20
60 20

40 15
10

20 10

0 0 5
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
14 P1
10
13
9 P2
12

8 11 NPSH
[ft] [m]
10 20 6
7
NPSH 4
9 10
2

TM04 7263 4318

6 8 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

14.4 12.5 0.323

60J 3 x 208 V D 2 3551 DOL 31.2 308 91.6 91.6 91.7 0.65 0.78 0.82 1.15 81.1 (110)
(10.6) (9.2) (0.0136)
3 x 230 V D/ 14.4 12.5 0.323
61R 2 3551 Y/D 30.5 / 15.8 240 / 165 89.5 90.8 90.6 0.78 0.87 0.85 1.15 81.1 (110)
460 V Y (10.6) (9.2) (0.0136)
14.4 12.5 0.323
61L 3 x 575 V D Y/D 2 3551 Y/D 12.0 118 91.6 91.6 91.7 0.65 0.78 0.82 1.15 81.1 (110)
(10.6) (9.2) (0.0136)

Pump data

Pump housing Max. liquid

Weight Max. solids size
pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
388 (176) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

74
 10

Performance curves and technical data

Performance curves: SLV.30.A30.150.2.--.C

H H
[m] [ft] SLV.30.A30.150.2
50 60 Hz
160 Eff
QH HI 11.6:2012 3B [%]
140 35
40
Eff 2
120 Eff 1 30

30 100 25

80 20

20
60 15

40 10
10
20 5

0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 3 / DN 80
0 2 4 6 8 10 12 v [ft/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
P P
[kW] [hp]
18
P1
12 16
P2
14
10

12 NPSH
8 [ft] [m]
10 20 6

NPSH 4
6 8 10
2

TM04 7264 4318

6 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

17.0 15.0 0.418

60J 3 x 208 V D 2 3551 DOL 38.2 308 91.6 91.8 91.6 0.73 0.82 0.86 1.15 81.1 (110)
(12.5) (11.0) (0.0176)
3 x 230 V D/ 17.1 15.0 0.418
61R 2 3551 Y/D 36.5 / 19.0 240 / 165 91.2 91.2 90.7 0.77 0.84 0.87 1.15 45.7 (62)
460 V Y (12.6 (11.0) (0.0176)
17.1 15.0 0.418
61L 3 x 575 V D Y/D 2 3551 Y/D 14.6 118 91.6 91.8 91.6 0.73 0.82 0.86 1.15 81.1 (110)
(12.6) (11.0) (0.0176)

Pump data

Pump housing Max. liquid

Weight Max. solids size
pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
387 (176) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

75
10
Performance curves and technical data

SLV.30.A40
Performance curves: SLV.30.A40.15.4.--.C

H H
[m] [ft] SLV.30.A40.15.4
60 Hz
28
HI 11.6:2012 3B Eff
8 [%]
24 QH
35

6 20 30

16 25

4
12 20

8 15
2
Eff 2
4 10

Eff 1
0 0 5
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 v [ft/s]
P P
[kW] [hp]
2.5

1.5 2.0 P1

1.5 P2 NPSH
1.0
[ft] [m]
1.0 10 3
0.5 2
0.5 5
NPSH

TM04 7265 4318

1
0.0 0.0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

2.0 1.5 2.176

60J 3 x 208 V D DOL 4 1754 DOL 5.2 33 81.0 84.2 84.6 0.52 0.65 0.72 1.15 17.7 (24)
(1.5) (1.1) (0.0917)
3 x 230 V D/ 2.0 1.5 2.176
61R 4 1754 Y/D 4.8 / 2.7 28 / 20 82.2 84.3 84.0 0.57 0.70 0.76 1.15 14.8 (20
460 V Y (1.5) (1.1) (0.0917)
2.0 1.5 2.176
60L 3 x 575 V D DOL 4 1754 DOL 2.0 13 81.0 84.2 84.6 0.52 0.65 0.72 1.15 17.7 (24)
(1.5) (1.1) (0.0917)
2.0 1.5 2.176
61L 3 x 575 V D Y/D 4 1754 Y/D 2.0 13 81.0 84.2 84.6 0.52 0.65 0.72 1.15 17.7 (24)
(1.5) (1.1) (0.0917)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
200 (90.6) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

76
 10

Performance curves and technical data

Performance curves: SLV.30.A40.18.4.--.C

H H
[m] [ft] SLV.30.A40.18.4
10 60 Hz
32 Eff
HI 11.6:2012 3B [%]
QH
28 40
8
24 35

6 20 30

16 25

4
12 20

8 15
2 Eff 2
4 Eff 1 10

0 0 5
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 v [ft/s]
P P
[kW] [hp]
2.5
P1
1.5 2.0
P2
1.5 NPSH
1.0
[ft] [m]
1.0 10 3
0.5 NPSH 2
0.5 5
1

TM04 7266 4318

0.0 0.0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

2.4 1.8 2.485

60J 3 x 208 V D DOL 4 1753 DOL 6.4 53 82.0 85.2 86.0 0.30 0.39 0.46 1.15 22.1 (30)
(1.8) (1.3) (0.1047)
3 x 230 V D/ 2.4 1.8 2.485
61R 4 1753 Y/D 5.7 / 3.3 40 / 30 82.8 85.3 85.8 0.52 0.65 0.72 1.15 18.4 (25)
460 V Y (1.8) (1.3) (0.1047)
2.4 1.8 2.485
60L 3 x 575 V D DOL 4 1753 DOL 2.5 20 82.0 85.2 86.0 0.30 0.39 0.46 1.15 22.1 (30)
(1.8) (1.3) (0.1047)
2.4 1.8 2.485
61L 3 x 575 V D Y/D 4 1753 Y/D 2.5 20 82.0 85.2 86.0 0.30 0.39 0.46 1.15 22.1 (30)
(1.8) (1.3) (0.1047)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
207 (94) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

77
10
Performance curves and technical data

Performance curves: SLV.30.A40.20.4.--.C

H H
[m] [ft] SLV.30.A40.20.4
10 QH 60 Hz
32 Eff
HI 11.6:2012 3B [%]
28 45
8
24 40

6 20 35

16 30

4
12 25

8 Eff 2 20
2
4 Eff 1 15

0 0 10
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 v [ft/s]
P P
[kW] [hp]
2.5 P1

1.5 2.0 P2

1.5 NPSH
1.0
[ft] [m]
1.0 10 3
0.5 NPSH
2
0.5 5
1

TM04 7267 4318

0.0 0.0 0 0
0 50 100 150 200 250 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

2.6 2.0 2.485

60J 3 x 208 V D DOL 4 1753 DOL 6.9 53 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.1047)
3 x 230 V D/ 2.6 2.0 2.485
61R 4 1753 Y/D 6.3 / 3.6 40 / 30 84.2 85.7 85.4 0.56 0.69 0.76 1.15 18.4 (25)
460 V Y (1.9) (1.5) (0.1047)
2.6 2.0 2.485
60L 3 x 575 V D DOL 4 1753 DOL 2.6 20 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.1047)
2.6 2.0 2.485
61L 3 x 575 V D Y/D 4 1753 Y/D 2.6 20 83.3 85.7 86.0 0.51 0.63 0.72 1.15 22.1 (30)
(1.9) (1.5) (0.1047)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
208 (94.2) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

78
 10

Performance curves and technical data

Performance curves: SLV.30.A40.30.4.--.C

H H
[m] [ft] SLV.30.A40.30.4
14
45 60 Hz Eff
QH HI 11.6:2012 3B [%]
12 40 50

35 45
10
30 40

8
25 35

6 20 30

15 25
4
10 20
2 Eff 2
5 15
Eff 1

0 0 10
0 50 100 150 200 250 300 350 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 v [ft/s]
P P
[kW] [hp]
3.5 P1
2.5

3.0 P2
2.0
2.5

1.5 2.0 NPSH

[ft] [m]
1.5 20 6
1.0
4
1.0 10
NPSH 2

TM04 7268 4318

0.5
0.5 0 0
0 50 100 150 200 250 300 350 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

3.7 3.0 1.369

60J 3 x 208 V D 4 1763 DOL 9.2 70 84.7 86.6 87.0 0.59 0.70 0.76 1.15 26.6 (36)
(2.7) (2.2) (0.0577)
3 x 230 V D/ 3.7 3.0 1.369
61R 4 1763 Y/D 8.5 / 4.8 40 / 30 85.5 86.6 86.3 0.65 0.75 0.80 1.15 26.6 (36)
460 V Y (2.7) (2.2) (0.0577)
3.7 3.0 1.369
61L 3 x 575 V D Y/D 4 1763 Y/D 3.5 27 84.7 86.6 87.0 0.59 0.70 0.76 1.15 26.6 (36)
(2.7) (2.2) (0.0577)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
224 (102) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

79
10
Performance curves and technical data

Performance curves: SLV.30.A40.55.2.--.C

H H
[m] [ft] SLV.30.A40.55.2
60 Hz
60 HI 11.6:2012 3B
QH Eff
[%]
15 50 25

40 20

10
30 15
Eff 2

20 10
5 Eff 1

10 5

0 0 0
0 50 100 150 200 250 300 350 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 v [ft/s]
P P
[kW] [hp]
6 8
P1
7
5

6 P2 NPSH
4 [ft] [m]
5 30
8
3 4 20 6
4
3 10
2 NPSH 2

TM04 7269 4318

2 0 0
0 50 100 150 200 250 300 350 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.7 5.5 3.097

61J 3 x 208 V D 2 1767 Y/D 15.0 166 82.0 85.0 86.0 0.76 0.84 0.88 1.15 56
(5.0) (4.0) (0.1305)
3 x 230 V D/ 6.7 5.5 3.097
61R 2 1767 Y/D 13.8 / 7.2 120 / 80 82.0 85.0 86.0 0.76 0.84 0.88 1.15 56
460 V Y (5.0) (4.0) (0.1305)
6.8 5.5 3.097
61L 3 x 575 V D Y/D 2 1767 Y/D 5.7 64 82.0 85.0 86.0 0.76 0.84 0.88 1.15 56
(5.0) (4.0) (0.1305)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
273 (124) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

80
 10

Performance curves and technical data

Performance curves: SLV.30.A40.55.4.--.C

H H
[m] [ft] SLV.30.A40.55.4
60 Hz
60 HI 11.6:2012 3B
Eff
QH
[%]
15 50 50

40 40

10
30 Eff 2 30

20 20
Eff 1
5

10 10

0 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 v [ft/s]
P P
[kW] [hp]
7
5
P1
6
4 P2
5

3 4 NPSH
[ft] [m]
3 20 6
2
4
2 10
NPSH 2

TM04 7270 4318

1
1 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.5 5.5 0.346

60J 3 x 208 V D 4 3535 DOL 16.8 133 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(4.8) (4.0) (0.0146)
3 x 230 V D/ 6.5 5.5 0.346
61R 4 3535 Y/D 15.4 / 8.6 120 / 80 86.2 87.8 87.8 0.59 0.70 0.78 1.15 48.7 (66)
460 V Y (4.8) (4.0) (0.0146)
6.5 5.5 0.346
61L 3 x 575 V D Y/D 4 3535 Y/D 6.4 51 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(4.8) (4.0) (0.0146)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
288 (131) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

81
10
Performance curves and technical data

Performance curves: SLV.30.A40.80.2.--.C

H H
[m] [ft] SLV.30.A40.80.2
60 Hz
70
HI 11.6:2012 3B Eff
20 QH [%]
60 30

15 50 25

40 20

10
30 15

20 Eff 2 10
5 Eff 1

10 5

0 0 0
0 50 100 150 200 250 300 350 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 v [ft/s]
P P
[kW] [hp]
9 P1

6 8 P2

7 NPSH
5 [ft] [m]
6 60
4 15
5 40
10
3 4 20
NPSH 5

TM04 7271 4318

3 0 0
0 50 100 150 200 250 300 350 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

9.8 8.0 0.638

60J 3 x 208 V D 2 3549 DOL 22.5 215 89.5 89.7 90.2 0.70 0.79 0.83 1.15 62.7 (85)
(7.2) (6.0) (0.0269)
3 x 230 V D/ 9.8 8.0 0.638
61R 2 3549 Y/D 20.4 / 10.9 170 / 120 89.8 90.8 90.7 0.75 0.84 0.87 1.15 36.9 (50)
460 V Y (7.2) (6.0) (0.0269)
9.8 8.0 0.638
61L 3 x 575 V D Y/D 2 3549 Y/D 8.6 82 89.5 89.7 90.2 0.70 0.79 0.83 1.15 62.7 (85)
(7.2) (6.0) (0.0269)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
306 (139) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

82
 10

Performance curves and technical data

Performance curves: SLV.30.A40.100.2.--.C

H H
[m] [ft] SLV.30.A40.100.2
25 QH 60 Hz
80 Eff
HI 11.6:2012 3B [%]
70 35
20
60 30

15 50 25

40 20

10
30 15
Eff 2
20 10
Eff 1
5
10 5

0 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 v [ft/s]
P P
[kW] [hp]
12
8 P1
10 P2

6 8 NPSH
[ft] [m]
6 60
4
15
4 40
10
2
2 20 5

TM04 7272 4318

NPSH
0 0 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

11.8 10.0 0.589

60J 3 x 208 V D 2 3533 DOL 27.0 215 90.3 90.8 90.1 0.74 0.82 0.86 1.15 62.7 (85)
(8.7) (7.5) (0.0248)
3 x 230 V D/ 12.0 10.0 0.589
61R 2 3533 Y/D 25.0 / 13.0 170 / 120 90.4 90.6 89.6 0.80 0.86 0.89 1.15 36.9 (50
460 V Y (8.8) (7.5) (0.0248)
12.0 10.0 0.589
61L 3 x 575 V D Y/D 2 3533 Y/D 10.3 82 90.3 90.8 90.1 0.74 0.82 0.86 1.15 62.7 (85)
(8.8) (7.5) (0.0248)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
307 (139) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

83
10
Performance curves and technical data

Performance curves: SLV.30.A40.125.2.--.C

H H
[m] [ft] SLV.30.A40.125.2
110 QH
60 Hz
100 HI 11.6:2012 3B
30
90
25 80 Eff
[%]
70 35
20
60 30

15 50 25

40 20
Eff 2
10
30 Eff 1 15

20 10
5
10 5

0 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 v [ft/s]
P P
[kW] [hp]
14 P1
10
P2
12
8
10 NPSH
[ft] [m]
6 8 40
10
6 20
4 NPSH
5

TM04 7273 4318

4 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

14.4 12.5 0.686

60J 3 x 208 V D 2 3551 DOL 31.2 308 91.6 91.6 91.7 0.65 0.78 0.82 1.15 81.1 (110)
(10.6) (9.2) (0.0289)
3 x 230 V D/ 14.4 12.5 0.686
61R 2 3551 Y/D 30.5 / 15.8 240 / 165 89.5 90.8 90.6 0.78 0.87 0.85 1.15 45.7 (62)
460 V Y (10.6) (9.2) (0.0289)
14.4 12.5 0.686
61L 3 x 575 V D Y/D 2 3551 Y/D 12.0 118 91.6 91.6 91.7 0.65 0.78 0.82 1.15 81.1 (110)
(10.6) (9.2) (0.0289)

Pump data

Pump housing Max. liquid

Weight Max. solids size
pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
387 (176) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

84
 10

Performance curves and technical data

Performance curves: SLV.30.A40.150.2.--.C

H H
[m] [ft] SLV.30.A40.150.2
60 Hz
140
HI 11.6:2012 3B Eff
40 QH [%]
120 40

30 100 35

80 30

20
60 25
Eff 2

40 20
10 Eff 1

20 15

0 0 10
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 v [ft/s]
P P
[kW] [hp]
18
P1
12 16
P2
14
10

12 NPSH
8 [ft] [m]
10 40
10
6 8 20
NPSH 5

TM04 7274 4318

6 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

17.0 15.0 0.638

60J 3 x 208 V D 2 3551 DOL 38.2 308 91.6 91.8 91.6 0.73 0.82 0.86 1.15 81.1 (110)
(12.5) (11.0) (0.0269)
3 x 230 V D/ 17.1 15.0 0.638
61R 2 3551 Y/D 36.5 / 19.0 240 / 165 91.2 91.2 90.7 0.77 0.84 0.87 1.15 81.1 (110)
460 V Y (12.6) (11.0) (0.0269)
17.1 15.0 0.638
61L 3 x 575 V D Y/D 2 3551 Y/D 14.6 118 91.6 91.8 91.6 0.73 0.82 0.86 1.15 81.1 (110)
(12.6) (11.0) (0.0269)

Pump data

Pump housing Max. liquid

Weight Max. solids size
pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
386 (175) SuperVortex 3 (80) 10 20 IP68 H A 104 (40) 4-14

85
10
Performance curves and technical data

SLV.40.A40
Performance curves: SLV.40.A40.40.4.--.C

H H
[m] [ft] SLV.40.A40.40.4
12 40 QH 60 Hz
HI 11.6:2012 3B
36
10 32 Eff
[%]
28 28
8
24 24

6 20 20
Eff 1
16 16
4 Eff 2
12 12

8 8
2
4 4

0 0 0
0 50 100 150 200 250 300 350 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 v [ft/s]
P P
[kW] [hp]
5 P1

3 4 P2

3 NPSH
2
[ft] [m]
2 10 3
1 2
NPSH
1 5
1

TM04 7275 4318

0 0 0 0
0 50 100 150 200 250 300 350 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

5.5 4.0 3.097

60J 3 x 208 V D 4 1755 DOL 12.2 98 84.6 86.3 86.4 0.63 0.75 0.79 1.15 40.6 (55)
(4.0) (3.0) (0.1305)
3 x 230 V D/ 5.1 4.0 3.097
61R 4 1755 Y/D 11.4 / 6.2 75 / 50 85.0 86.0 85.6 0.70 0.79 0.82 1.15 32.5 (44)
460 V Y (3.7) (3.0) (0.1305)
5.1 4.0 3.097
61L 3 x 575 V D Y/D 4 1755 Y/D 10.0 79 84.6 86.3 86.4 0.63 0.75 0.79 1.15 40.6 (55)
(3.7) (3.0) (0.1305)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
253 (114) SuperVortex 4 (100) 10 20 IP68 H A 104 (40) 4-14

86
 10

Performance curves and technical data

Performance curves: SLV.40.A40.55.4.--.C

H H
[m] [ft] SLV.40.A40.55.4
50 QH 60 Hz
14 HI 11.6:2012 3B
45 Eff
[%]
12 40 40

35 35
10
30 30
8
25 25

6 20 Eff 2 20
Eff 1
15 15
4
10 10
2
5 5

0 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 v [ft/s]
P P
[kW] [hp]
7
5
P1
6
4 P2
5 NPSH
[ft] [m]
3 4 15
4
3 10 3
2 NPSH
2
2 5
1

TM04 7276 4318

1
1 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

6.5 5.5 3.073

60J 3 x 208 V D 4 1767 DOL 16.8 133 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(4.8) (4.0) (0.1295)
3 x 230 V D/ 6.5 5.5 3.073
61R 4 1767 Y/D 15.4 / 8.6 120 / 80 86.2 87.8 87.8 0.59 0.70 0.78 1.15 48.7 (66)
460 V Y (4.8) (4.0) (0.1295)
6.5 5.5 3.073
61L 3 x 575 V D Y/D 4 1767 Y/D 6.4 51 85.3 87.4 88.2 0.53 0.66 0.74 1.15 61.2 (83)
(4.8) (4.0) (0.1295)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
282 (128) SuperVortex 4 (100) 10 20 IP68 H A 104 (40) 4-14

87
10
Performance curves and technical data

Performance curves: SLV.40.A40.75.4.--.C

H H
[m] [ft] SLV.40.A40.75.4
60 Hz
70
QH
HI 11.6:2012 3B
20
60
Eff
[%]
15 50 50

40 40
Eff 2
10
30 Eff 1 30

20 20
5

10 10

0 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 v [ft/s]
P P
[kW] [hp]
9
P1
6 8
P2
7
5

6 NPSH
4 [ft] [m]
5 20 6
4
3 4 10
NPSH 2

TM04 7277 4318

3 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

8.5 7.5 3.073

60J 3 x 208 V D 4 1765 DOL 19.3 149 88.9 90.0 89.6 0.73 0.81 0.86 1.15 73 (99)
(6.3) (5.5) (0.1295)
3 x 230 V D/ 8.7 7.5 3.073
61R 4 1765 Y/D 18.3 / 9.6 120 / 80 89.2 89.7 88.9 0.77 0.84 0.87 1.15 60.5 (82)
460 V Y (6.4) (5.5) (0.1295)
8.7 7.5 3.073
61L 3 x 575 V D Y/D 4 1765 Y/D 7.4 57 88.9 90.0 89.6 0.73 0.81 0.86 1.15 73 (99)
(6.4) (5.5) (0.1295)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
305 (138) SuperVortex 4 (100) 10 20 IP68 H A 104 (40) 4-14

88
 10

Performance curves and technical data

Performance curves: SLV.40.A40.100.4.--.C

H H
[m] [ft] SLV.40.A40.100.4
25 60 Hz
80 Eff
QH HI 11.6:2012 3B [%]
70 50
20
Eff 2
60 45

Eff 1
15 50 40

40 35

10
30 30

20 25
5
10 20

0 0 15
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]
ANSI 4 / DN 100
0 2 4 6 8 10 12 v [ft/s]
ANSI 6 / DN 150
0 1 2 3 4 5 v [ft/s]
P P
[kW] [hp]
12
P1
8 11

10 P2
7
9
6 8 NPSH
[ft] [m]

5 7 20 6
4
6 NPSH 10
2

TM04 7278 4318

4
5 0 0
0 50 100 150 200 250 300 350 400 Q [US GPM]

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Q [l/s]

Electrical data
ηmotor [%] Cos φ
No. of poles

IN Istart Moment of
P1 P2 Breakdown
Pump Voltage inertia
Starting
method

[hp [hp RPM SF torque Mmax

type [V] [lb*ft2
(kW)] (kW)] [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [lbf*ft (Nm)]
(kgm2)]

11.4 10.0 1.839

60J 3 x 208 V D 4 1766 DOL 26.1 205 91.0 91.4 91.0 0.71 0.81 0.85 1.15 118 (160)
(8.4) (7.5) (0.0775)
3 x 230 V D/ 11.6 10.0 1.839
61R 4 1766 Y/D 24.5 / 13.1 160 / 110 90.9 91.1 90.3 0.75 0.84 0.87 1.15 81.3 (110)
460 V Y (8.6) (7.5) (0.0775)
11.6 10.0 1.839
61L 3 x 575 V D Y/D 4 1766 Y/D 10.0 79 91.0 91.4 91.0 0.71 0.81 0.85 1.15 118 (160)
(8.6) (7.5) (0.0775)

Pump data
Pump housing Max. liquid
Max. solids size
Weight pressure Max. number of Temperature temperature
Impeller type Enclosure class Insulation class pH
[lb. (kg)] starts per hour rise class
[in. (mm)] PN [°F (°C)]
372 (169) SuperVortex 4 (100) 10 20 IP68 H A 104 (40) 4-14

89
 SL1, SLV pumps
11
11. Dimensions
Dimensions

Auto-coupling installation
Z7

Z8
Z9

Z10

Z15

ZDN1

Z11

Z23
S3OPR

Z12a
Z16

ZM Z14

TM04 2794 0917

Z2
Z3

Z4
Z6

SL1 pumps
Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 Z23 S30PR
ZDN1
Pump type in in in in in in in in in in in in in in
ANSI (DIN)
in ZM
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
8.3 3.7 5.5 27.6 20.3 14.3 3.2 1.5 29.1 3.8 0.1 6.9 10.5 20.3 2.5'' 18.2
SL1.20.A25.30.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (700) (514) (364) (81) (40) (738) (97) (1) (175) (266) (516) (DN 65) (463)
8.3 3.7 5.5 27.6 20.3 14.3 3.2 1.5 29.1 3.8 0.1 6.9 10.5 20.3 2.5'' 18.4
SL1.20.A25.40.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (700) (514) (364) (81) (40) (738) (97) (1) (175) (266) (516) (DN 65) (468)
8.3 3.7 5.5 29.2 21.9 14.8 3.2 1.5 30.5 3.8 0.1 6.9 10.5 21.7 2.5'' 18.1
SL1.20.A25.55.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (741) (555) (375) (81) (40) (774) (97) (1) (175) (266) (552) (DN 65) (460)
8.7 3.7 6.3 28.3 20.7 14.8 3.2 1.5 30.4 5.2 0.51 6.7 13.6 20.3 19.5
SL1.20.A30.30.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (719) (526) (376) (81) (40) (772) (131) (13) (171) (345) (516) (495)
8.7 3.7 6.3 28.3 20.7 14.8 3.2 1.5 30.4 5.2 0.5 6.7 13.6 20.3 19.7
SL1.20.A30.40.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (719) (526) (376) (81) (40) (772) (131) (13) (171) (345) (516) (500)
8.7 3.7 6.3 29.9 22.4 15.2 3.2 1.5 31.8 5.2 0.5 6.7 13.6 21.7 19.5
SL1.20.A30.55.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (760) (567) (387) (81) (40) (808) (131) (13) (171) (345) (552) (495)
8.7 3.7 6.3 31 23.5 17 3.2 1.5 31.3 4.4 0.5 6.7 13.6 21.9 20.2
SL1.30.A30.20.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (788) (595) (432) (81) (40) (793) (111) (13) (171) (345) (557) (513)
8.7 3.7 6.3 31 23.5 17 3.2 1.5 31.3 4.4 0.5 6.7 13.6 21.9 20.4
SL1.30.A30.30.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (788) (595) (432) (81) (40) (793) (111) (13) (171) (345) (557) (518)
8.7 3.7 6.3 33.8 26.2 18.9 3.2 1.5 31.3 3.2 0.5 6.7 13.6 23.1 20.2
SL1.30.A30.40.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (858) (665) (479) (81) (40) (793) (82) (13) (171) (345) (586) (512)
8.7 3.7 6.3 33.8 26.2 18.9 3.2 1.5 32.7 3.2 0.5 6.7 13.6 24.5 20.4
SL1.30.A30.55.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (858) (665) (479) (81) (40) (830) (82) (13) (171) (345) (623) (517)
8.7 3.7 6.3 33.8 26.2 18.9 3.2 1.5 33 3.2 0.5 6.7 13.6 23.4 20
SL1.30.A30.75.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (858) (665) (479) (81) (40) (837) (82) (13) (171) (345) (595) (507)
8.7 3.7 6.3 34.8 27.2 19.2 3.2 1.5 35.5 3.2 0.5 6.7 13.6 25.9 20.8
SL1.30.A30.100.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (883) (690) (488) (81) (40) (900) (82) (13) (171) (345) (658) (528)
10.2 4.3 8.7 34.6 25.7 19.3 4.3 2 32.8 5.9 8.7 16.3 21.9 21.8
SL1.30.A40.20.(A).(EX).4.--.C 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (878) (652) (489) (110) (50) (832) (150) (220) (413) (557) (553)
10.2 4.3 8.7 34.6 25.7 19.3 4.3 2 32.8 5.9 8.7 16.3 21.9 22
SL1.30.A40.30.(A).(EX).4.--.C 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (878) (652) (489) (110) (50) (832) (150) (220) (413) (557) (558)
10.2 4.3 8.7 37.3 28.5 21.1 4.3 2 33.5 4.9 8.7 16.3 23.7 21.9
SL1.30.A40.40.(A).(EX).4.--.C 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (948) (722) (536) (110) (50) (851) (125) (220) (413) (601) (555)
10.2 4.3 8.7 37.3 28.5 21.1 4.3 2 34.37 4.9 8.7 16.3 24.5 22
SL1.30.A40.55.(A).(EX).4.--.C 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (948) (722) (536) (110) (50) (873) (125) (220) (413) (623) (560)
10.2 4.3 8.7 37.3 28.5 21.1 4.3 2 34.7 4.9 8.7 16.3 23.4 21.7
SL1.30.A40.75.(A).(EX).4.--.C 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (948) (722) (536) (110) (50) (880) (125) (220) (413) (595) (550)

90
SL1, SLV pumps
11

Dimensions
Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 Z23 S30PR
ZDN1
Pump type in in in in in in in in in in in in in in
ANSI (DIN)
in ZM
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
10.2 4.3 8.7 38.3 29.5 21.5 4.3 2 37.1 4.9 8.7 16.3 25.9 22.2
SL1.30.A40.100.(A).(EX).4.--.C 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (973) (747) (545) (110) (50) (942) (124) (220) (413) (658) (565)
10.2 4.3 8.7 38.7 29.9 21.1 4.3 2 34.7 4.9 8.7 16.3 24.8 22.5
SL1.40.A40.55.(A).(EX).4.--.C 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (984) (758) (537) (110) (50) (880) (125) (220) (413) (630) (572)
10.2 4.3 8.7 38.7 29.9 21.1 4.3 2 35 4.9 8.7 16.3 23.7 22.1
SL1.40.A40.75.(A).(EX).4.--.C 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (984) (758) (537) (110) (50) (887) (125) (220) (413) (602) (562)
10.2 4.3 8.7 38.7 29.9 20.8 4.3 2 37.5 4.9 8.7 16.3 26.3 22.7
SL1.40.A40.100.(A).(EX).4.--.C 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (984) (758) (529) (110) (50) (952) (125) (220) (413) (667) (576)
11.8 4.3 11 43 31 22 4.3 2 36.18 6.5 11 17.7 24.8 24.1
SL1.40.A60.55.(A).(EX).4.--.C 0 (0) 6'' (DN 150) 4 x M16
(300) (110) (280) (1093) (780) (559) (110) (50) (919) (164) (280) (450) (630) (611)
11.8 4.3 11 43 30.8 22 4.3 2 36.5 6.5 11 17.7 23.7 23.7
SL1.40.A60.75.(A).(EX).4.--.C 0 (0) 6'' (DN 150) 4 x M16
(300) (110) (280) (1093) (780) (559) (110) (50) (926) (164) (280) (450) (602) (601)
11.8 4.3 11 43 30.8 21.5 4.3 2 39.1 6.5 11 17.7 26.3 24.2
SL1.40.A60.100.(A).(EX).4.--.C 0 (0) 6'' (DN 150) 4 x M16
(300) (110) (280) (1093) (780) (545) (110) (50) (991) (164) (280) (450) (667) (615)

SLV pumps
Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 Z23 S30PR
ZDN1
Pump type in in in in in in in in in in in in in in
ANSI (DIN)
in ZM
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
8.3 3.7 5.5 28.7 21.5 15.5 3.2 1.5 29.5 2.5 0.1 6.9 10.5 22 2.5'' 18.9
SLV.25.A25.30.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (730) (544) (394) (81) (40) (748) (64) (1) (175) (266) (559) (DN 65) (479)
8.3 3.7 5.5 28.7 21.5 15.5 3.2 1.5 29.5 2.5 0.1 6.9 10.5 22 2.5'' 19.1
SLV.25.A25.40.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (730) (544) (394) (81) (40) (748) (64) (1) (175) (266) (559) (DN 65) (485)
8.3 3.7 5.5 31.1 23.8 16.7 3.2 1.5 30.7 2.4 0.1 6.9 10.5 23.3 2.5'' 18.7
SLV.25.A25.55.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (790) (604) (424) (81) (40) (778) (60) (1) (175) (266) (593) (DN 65) (476)
8.7 3.7 6.3 29.5 22 16 3.2 1.5 30.8 3.8 0.51 6.7 13.6 22 20.2
SLV.25.A30.30.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (750) (557) (407) (81) (40) (782) (97) (13) (171) (345) (560) (513)
8.7 3.7 6.3 29.5 22 16 3.2 1.5 30.8 3.8 0.6 6.7 13.6 22 20.4
SLV.25.A30.40.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (750) (557) (407) (81) (40) (782) (97) (13) (171) (345) (560) (518)
8.7 3.7 6.3 31.8 24.3 17.2 3.2 1.5 32 3.7 0.6 6.7 13.6 23.3 20.1
SLV.25.A30.55.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (808) (615) (436) (81) (40) (812) (94) (13) (171) (345) (593) (510)
8.7 3.7 6.3 30 22.4 15.8 3.2 1.5 31.6 3.6 0.6 6.7 13.6 23.1 20.7
SLV.30.A30.15.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (762) (569) (401) (81) (40) (802) (91) (13) (171) (345) (586) (526)
8.7 3.7 6.3 30 22.4 15.8 3.2 1.5 31.6 3.6 0.6 6.7 13.6 23.1 20.7
SLV.30.A30.18.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (762) (569) (401) (81) (40) (802) (91) (13) (171) (345) (586) (526)
8.7 3.7 6.3 30 22.4 15.8 3.2 1.5 31.6 3.6 0.6 6.7 13.6 23.1 20.7
SLV.30.A30.20.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (762) (569) (401) (81) (40) (802) (91) (13) (171) (345) (586) (526)
8.7 3.7 6.3 30 22.4 15.8 3.2 1.5 31.6 3.6 0.6 6.7 13.6 23.1 20.9
SLV.30.A30.30.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (762) (569) (401) (81) (40) (802) (91) (13) (171) (345) (586) (531)
8.7 3.7 6.3 31.9 24.3 17.2 3.2 1.5 33.1 3.8 0.6 6.7 13.6 24.4 21.1
SLV.30.A30.55.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (809) (616) (436) (81) (40) (840) (96) (13) (171) (345) (619) (537)
8.7 3.7 6.3 32 24.5 16.8 3.2 1.5 33.1 3.6 0.6 6.7 13.6 24.5 21.1
SLV.30.A30.55.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (813) (620) (427) (81) (40) (839) (91) (13) (171) (345) (623) (537)
8.7 3.7 6.3 31.9 24.3 17.2 3.2 1.5 33.4 3.8 0.6 6.7 13.6 23.3 20.7
SLV.30.A30.80.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (809) (616) (436) (81) (40) (847) (96) (13) (171) (345) (591) (527)
8.7 3.7 6.3 31.9 24.3 17.2 3.2 1.5 33.4 3.8 0.6 6.7 13.6 23.3 20.7
SLV.30.A30.100.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (809) (616) (436) (81) (40) (847) (96) (13) (171) (345) (591) (527)
8.7 3.7 6.3 33.2 25.6 17.8 3.2 1.5 33.9 0.6 6.7 13.6 24.5 21.1
SLV.30.A30.125.(A).(EX).2.--.C 3 (77) 3'' (DN 80) 4 x M16
(220) (95) (160) (842) (649) (453) (81) (40) (859) (13) (171) (345) (622) (535)
8.7 3.7 6.3 33.2 25.6 17.8 3.2 1.5 33.9 0.6 6.7 13.6 24.5 21.1
SLV.30.A30.150.(A).(EX).2.--.C 3 (77) 3'' (DN 80) 4 x M16
(220) (95) (160) (842) (649) (453) (81) (40) (859) (13) (171) (345) (622) (535)
10.3 4.3 8.7 33.5 24.6 18 4.3 33.2 5.2 8.7 16.3 23.1 22.4
SLV.30.A40.15.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (850) (624) (458) (110) (842) (131) (220) (413) (586) (569)
10.3 4.3 8.7 33.5 24.6 18 4.3 33.2 5.2 8.7 16.3 23.1 22.4
SLV.30.A40.18.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (850) (624) (458) (110) (842) (131) (220) (413) (586) (569)
10.3 4.3 8.7 33.5 24.6 18 4.3 33.2 5.2 8.7 16.3 23.1 22.4
SLV.30.A40.20.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (850) (624) (458) (110) (842) (131) (220) (413) (586) (569)
10.3 4.3 8.7 33.5 24.6 18 4.3 33.2 5.2 8.7 16.3 23.1 22.6
SLV.30.A40.30.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (850) (624) (458) (110) (842) (131) (220) (413) (586) (574)
10.3 4.3 8.7 35.8 26.9 19.8 4.3 34.7 5.4 8.7 16.3 24.4 22.4
SLV.30.A40.55.(A).(EX).2.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (909) (683) (503) (110) (880) (136) (220) (413) (619) (570)
10.3 4.3 8.7 35.5 26.6 19.1 4.3 34.7 5.2 8.7 16.3 24.5 22.4
SLV.30.A40.55.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (901) (675) (484) (110) (879) (131) (220) (413) (623) (570)
10.3 4.3 8.7 35.8 26.9 19.8 4.3 35 5.4 8.7 16.3 23.3 22.0
SLV.30.A40.80.(A).(EX).2.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (909) (683) (503) (110) (887) (136) (220) (413) (591) (560)
10.3 4.3 8.7 35.8 26.9 19.8 4.3 35 5.4 8.7 16.3 23.3 22.0
SLV.30.A40.100.(A).(EX).2.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (909) (683) (503) (110) (887) (136) (220) (413) (591) (560)
10.3 4.3 8.7 37.1 28.2 20.5 4.3 35.4 4.6 8.7 16.3 24.5 22.5
SLV.30.A40.125.(A).(EX).2.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (942) (716) (520) (110) (899) (117) (220) (413) (622) (571)
10.3 4.3 8.7 37.1 28.2 20.5 4.3 35.4 4.6 8.7 16.3 24.5 22.5
SLV.30.A40.150.(A).(EX).2.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (942) (716) (520) (110) (899) (117) (220) (413) (622) (571)
10.3 4.3 8.7 35.4 26.6 19.4 4.3 33.2 4.2 8.7 16.3 24.1 21.7
SLV.40.A40.40.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (900) (674) (494) (110) (843) (106) (220) (413) (612) (552)
10.3 4.3 8.7 35.4 26.6 19.4 4.3 34.1 4.2 8.7 16.3 25 21.9
SLV.40.A40.55.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (900) (674) (494) (110) (865) (106) (220) (413) (634) (557)
10.3 4.3 8.7 35.4 26.6 19.4 4.3 34.33 4.2 8.7 16.3 23.9 21.5
SLV.40.A40.75.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (900) (674) (494) (110) (872) (106) (220) (413) (606) (547)
10.3 4.3 8.7 36.7 27.9 20.1 4.3 37 3.7 8.7 16.3 26.9 21.9
SLV.40.A40.100.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (933) (707) (511) (110) (937) (95) (220) (413) (682) (555)

91
 SL1, SLV pumps
11
Free standing installation (without ring stand)
Dimensions

F
Dc10

D1n DØ1

A
DN2

TM04 2793 5116

H

Dc02
E
C D2n DØ2 DN1

SL1 pumps
A C D E F H DN1 Dc10 DN2 Dc02 D2n D∅2
Pump type in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) ANSI (DIN) in (mm)
D1n D∅1
ANSI (DIN) in (mm) in (mm)
25.2 14.4 6.7 8.5 12.6 5.5 5.5
SL1.20.A25.30.(A).(EX).2.--.C 3.7 (69) 2.5'' (DN 65) 4 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(641) (366) (171) (216) (321) (140) (140)
25.2 14.4 6.7 8.5 12.6 5.5 5.5
SL1.20.A25.40.(A).(EX).2.--.C 3.7 (69) 2.5'' (DN 65) 4 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(641) (366) (171) (216) (321) (140) (140)
26.7 16 7.9 8.9 14.9 5.5 5.5
SL1.20.A25.55.(A).(EX).2.--.C 3.7 (69) 2.5'' (DN 65) 4 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(677) (407) (200) (227) (379) (140) (140)
25.2 14.4 6.7 8.5 12.6 5.5
SL1.20.A30.30.(A).(EX).2.--.C 3.9 (69) 2.5'' (DN 65) 4 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(641) (366) (171) (216) (321) (140)
25.2 14.4 6.7 8.5 12.6 5.5
SL1.20.A30.40.(A).(EX).2.--.C 3.9 (69) 2.5'' (DN 65) 4 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(641) (366) (171) (216) (321) (140)
26.7 16 7.9 8.9 14.9 5.5
SL1.20.A30.55.(A).(EX).2.--.C 3.9 (69) 2.5'' (DN 65) 4 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(677) (407) (200) (227) (379) (140)
26.9 17.1 6.7 10.7 13.7 7.5
SL1.30.A30.20.(A).(EX).4.--.C 3.9 (89) 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(682) (435) (171) (272) (347) (191)
26.9 17.1 6.7 10.7 13.7 7.5
SL1.30.A30.30.(A).(EX).4.--.C 3.9 (89) 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(682) (435) (171) (272) (347) (191)
28 19.9 7.9 12.6 15.6 4.6 7.5
SL1.30.A30.40.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(711) (505) (200) (319) (397) (118) (191)
29.4 19.9 7.9 12.6 15.6 4.6 7.5
SL1.30.A30.55.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(748) (505) (200) (319) (397) (118) (191)
29.7 19.9 7.9 12.6 15.6 4.6 7.5
SL1.30.A30.75.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(755) (505) (200) (319) (397) (118) (191)
32.2 20.9 8.5 12.9 16.7 4.6 7.5
SL1.30.A30.100.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(818) (530) (217) (328) (423) (118) (191)
26.9 17.1 6.7 10.7 13.7 7.5 7.5
SL1.30.A40.20.(A).(EX).4.--.C 4.4 (90) 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(682) (435) (171) (272) (347) (191) (191)
26.9 17.1 6.7 10.7 13.7 7.5 7.5
SL1.30.A40.30.(A).(EX).4.--.C 4.4 (90) 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(682) (435) (171) (272) (347) (191) (191)
28.6 19.9 7.9 12.6 15.6 4.6 7.5 7.5
SL1.30.A40.40.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(726) (505) (200) (319) (397) (115) (191) (191)
29.4 19.9 7.9 12.6 15.6 4.6 7.5 7.5
SL1.30.A40.55.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(748) (505) (200) (319) (397) (115) (191) (191)
29.7 19.9 7.9 12.6 15.6 4.6 7.5 7.5
SL1.30.A40.75.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(755) (505) (200) (319) (397) (115) (191) (191)
32.2 20.9 8.5 12.9 16.7 4.6 7.5 7.5
SL1.30.A40.100.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(818) (530) (217) (328) (423) (116) (191) (191)

92
SL1, SLV pumps
11

Dimensions
A C D E F H DN1 Dc10 DN2 Dc02 D2n D∅2
Pump type in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) ANSI (DIN) in (mm)
D1n D∅1
ANSI (DIN) in (mm) in (mm)
29.7 21.3 7.9 12.6 17.2 4.5 9.5 7.5
SL1.40.A40.55.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 4'' (DN 100) 8 x 0.75 (19.1)
(755) (541) (200) (320) (438) (115) (242) (191)
30 21.3 7.9 12.6 17.2 4.5 9.5 7.5
SL1.40.A40.75.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 4'' (DN 100) 8 x 0.75 (19.1)
(762) (541) (200) (320) (438) (115) (242) (191)
32.6 21.3 8.5 12.3 18.2 4.5 9.5 7.5
SL1.40.A40.100.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 4'' (DN 100) 8 x 0.75 (19.1)
(827) (541) (217) (312) (462) (115) (242) (191)
29.7 21.3 7.9 12.6 17.3 4.4 9.5 9.5
SL1.40.A60.55.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 6'' (DN 150) 8 x 0.88 (22.1)
(755) (541) (200) (320) (440) (111) (242) (242)
30 21.3 7.9 12.6 17.3 4.4 9.5 9.5
SL1.40.A60.75.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 6'' (DN 150) 8 x 0.88 (22.1)
(762) (541) (200) (320) (440) (111) (242) (242)
32.6 21.3 8.5 12 18.6 4.4 9.5 9.5
SL1.40.A60.100.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 6'' (DN 150) 8 x 0.88 (22.1)
(827) (541) (217) (306) (472) (111) (242) (242)

SLV pumps
A C D E F H DN1 Dc10 DN2 Dc02 D2n D∅2
Pump type in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) ANSI (DIN) in (mm)
D1n D∅1
ANSI (DIN) in (mm) in (mm)
26.9 15.6 6.7 9.7 12.6 5.5
SLV.25.A25.30.(A).(EX).2.--.C 4 (102) 3'' (DN 80) 6 (153) 8 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(684) (396) (171) (246) (321) (140)
26.9 15.6 6.7 9.7 12.6 5.5
SLV.25.A25.40.(A).(EX).2.--.C 4 (102) 3'' (DN 80) 6 (153) 8 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(684) (396) (171) (246) (321) (140)
28.3 18 7.9 10.9 15 4.2 5.5
SLV.25.A25.55.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(718) (456) (200) (276) (380) (106) (140)
27 15.6 6.7 9.7 12.6 4.1
SLV.25.A30.30.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(685) (397) (171) (247) (321) (103)
27 15.6 6.7 9.7 12.6 4.1
SLV.25.A30.40.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(685) (397) (171) (247) (321) (103)
28.3 17.9 7.9 10.9 14.9 4.2
SLV.25.A30.55.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(718) (455) (200) (276) (379) (106)
28 16.1 6.7 9.5 13.4 4.3
SLV.30.A30.15.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(711) (409) (171) (241) (339) (109)
28 16.1 6.7 9.5 13.4 4.3
SLV.30.A30.18.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(711) (409) (171) (241) (339) (109)
28 16.1 6.7 9.5 13.4 4.3
SLV.30.A30.20.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(711) (409) (171) (241) (339) (109)
28 16.1 6.7 9.5 13.4 4.3
SLV.30.A30.30.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(711) (409) (171) (241) (339) (109)
29.3 18 7.9 10.9 15 4.1
SLV.30.A30.55.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(744) (456) (200) (276) (380) (104)
29.5 18.1 7.9 10.5 15.5 4.3
SLV.30.A30.55.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(748) (460) (200) (267) (393) (109)
29.6 18 7.9 10.9 15 4.1
SLV.30.A30.80.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(751) (456) (200) (276) (380) (104)
29.6 18 7.9 10.9 15 4.1
SLV.30.A30.100.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(751) (456) (200) (276) (380) (104)
30.8 19.3 8.5 11.5 16.3 4.8
SLV.30.A30.125.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(782) (489) (217) (293) (413) (123)
30.8 19.3 8.5 11.5 16.3 4.8
SLV.30.A30.150.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(782) (489) (217) (293) (413) (123)
28 16 6.7 9.5 13.3 4.3 7.5
SLV.30.A40.15.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(711) (407) (171) (241) (337) (109) (191)
28 16 6.7 9.5 13.3 4.3 7.5
SLV.30.A40.18.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(711) (407) (171) (241) (337) (109) (191)
28 16 6.7 9.5 13.3 4.3 7.5
SLV.30.A40.20.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(711) (407) (171) (241) (337) (109) (191)
28 16 6.7 9.5 13.3 4.3 7.5
SLV.30.A40.30.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(711) (407) (171) (241) (337) (109) (191)
29.3 18.4 7.9 11.3 15 4.1 7.5
SLV.30.A40.55.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(744) (466) (200) (286) (380) (104) (191)
29.5 18 7.9 10.5 15.4 4.3 7.5
SLV.30.A40.55.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(748) (458) (200) (267) (391) (109) (191)
29.6 18.4 7.9 11.3 15 4.1 7.5
SLV.30.A40.80.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(751) (466) (200) (286) (380) (104) (191)
29.6 18.4 7.9 11.3 15 4.1 7.5
SLV.30.A40.100.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(751) (466) (200) (286) (380) (104) (191)
30.8 19.7 8.5 11.9 16.3 4.8 7.5
SLV.30.A40.125.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(782) (499) (217) (303) (413) (123) (191)
30.8 19.7 8.5 11.9 16.3 4.8 7.5
SLV.30.A40.150.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(782) (499) (217) (303) (413) (123) (191)
29 18 7.9 10.9 15 5.3 7.5 7.5
SLV.40.A40.40.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(737) (457) (200) (277) (380) (134) (191) (191)
29.9 18 7.9 10.9 15 5.3 7.5 7.5
SLV.40.A40.55.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(759) (457) (200) (277) (380) (134) (191) (191)
30.2 18 7.9 10.9 15 5.3 7.5 7.5
SLV.40.A40.75.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(766) (457) (200) (277) (380) (134) (191) (191)
33.2 19.3 8.5 11.6 16.3 5.7 7.5 7.5
SLV.40.A40.100.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(842) (490) (217) (294) (413) (145) (191) (191)

93
 SL1, SLV pumps
11
Free standing installation (with ring stand)
Dimensions

TM04 2795 3008

SL1 pumps
V1 V2 V3 V4 V5 V6 V7 V∅
Pump type in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm)
SL1.20.A25.30.(A).(EX).2.--.C 31 (771) 14.1 (358) 5.1 (130) 12.8 (325) 10.6 (270) 18.8 (479) 2.6 (65) 0.7 (19)
SL1.20.A25.40.(A).(EX).2.--.C 31 (771) 14.1 (358) 5.1 (130) 12.8 (325) 10.6 (270) 18.8 (479) 2.6 (65) 0.7 (19)
SL1.20.A25.55.(A).(EX).2.--.C 31.8 (807) 14.1 (358) 5.1 (130) 12.8 (325) 10.6 (270) 20.5 (520) 2.6 (65) 0.7 (19)
SL1.20.A30.30.(A).(EX).2.--.C 31 (771) 14.7 (373) 5.1 (130) 12.8 (325) 10.6 (270) 19 (482) 3.2 (80) 0.7 (19)
SL1.20.A30.40.(A).(EX).2.--.C 31 (771) 14.7 (373) 5.1 (130) 12.8 (325) 10.6 (270) 19 (482) 3.2 (80) 0.7 (19)
SL1.20.A30.55.(A).(EX).2.--.C 31.8 (807) 14.7 (373) 5.1 (130) 12.8 (325) 10.6 (270) 20.6 (523) 3.2 (80) 0.7 (19)
SL1.30.A30.20.(A).(EX).4.--.C 32 (812) 15.5 (393) 5.1 (130) 14 (355) 11.8 (300) 21.7 (551) 3.2 (80) 0.7 (19)
SL1.30.A30.30.(A).(EX).4.--.C 32 (812) 15.5 (393) 5.1 (130) 14 (355) 11.8 (300) 21.7 (551) 3.2 (80) 0.7 (19)
SL1.30.A30.40.(A).(EX).4.--.C 33.1 (841) 16.6 (422) 5.1 (130) 14 (355) 11.8 (300) 24.4 (621) 3.2 (80) 0.7 (19)
SL1.30.A30.55.(A).(EX).4.--.C 34.6 (878) 16.6 (422) 5.1 (130) 14 (355) 11.8 (300) 24.4 (621) 3.2 (80) 0.7 (19)
SL1.30.A30.75.(A).(EX).4.--.C 34.9 (885) 16.6 (422) 5.1 (130) 14 (355) 11.8 (300) 24.4 (621) 3.2 (80) 0.7 (19)
SL1.30.A30.100.(A).(EX).4.--.C 37.4 (948) 16.6 (422) 5.1 (130) 14 (355) 11.8 (300) 25.4 (646) 3.2 (80) 0.7 (19)
SL1.30.A40.20.(A).(EX).4.--.C 32 (812) 14.4 (364) 5.1 (130) 14 (355) 11.8 (300) 23.5 (598) 3.9 (100) 0.7 (19)
SL1.30.A40.30.(A).(EX).4.--.C 32 (812) 14.4 (364) 5.1 (130) 14 (355) 11.8 (300) 23.5 (598) 3.9 (100) 0.7 (19)
SL1.30.A40.40.(A).(EX).4.--.C 33.7 (856) 15.3 (389) 5.1 (130) 14 (355) 11.8 (300) 26.3 (668) 3.9 (100) 0.7 (19)
SL1.30.A40.55.(A).(EX).4.--.C 34.6 (878) 15.3 (389) 5.1 (130) 14 (355) 11.8 (300) 26.3 (668) 3.9 (100) 0.7 (19)
SL1.30.A40.75.(A).(EX).4.--.C 34.9 (885) 15.3 (389) 5.1 (130) 14 (355) 11.8 (300) 26.3 (668) 3.9 (100) 0.7 (19)
SL1.30.A40.100.(A).(EX).4.--.C 37.4 (948) 15.4 (390) 5.1 (130) 14 (355) 11.8 (300) 27.3 (693) 3.9 (100) 0.7 (19)
SL1.40.A40.55.(A).(EX).4.--.C 37.1 (941) 17.5 (445) 7.3 (186) 17.7 (450) 15.7 (400) 27.7 (704) 3.9 (100) 0.9 (22)
SL1.40.A40.75.(A).(EX).4.--.C 37.4 (948) 17.5 (445) 7.3 (186) 17.7 (450) 15.7 (400) 27.7 (704) 3.9 (100) 0.9 (22)
SL1.40.A40.100.(A).(EX).4.--.C 39.9 (1013) 17.5 (445) 7.3 (186) 17.7 (450) 15.7 (400) 27.7 (704) 3.9 (100) 0.9 (22)
SL1.40.A60.55.(A).(EX).4.--.C 37.1 (941) 22.5 (570) 7.3 (186) 17.7 (450) 15.7 (400) 31.6 (803) 5.9 (150) 0.9 (22)
SL1.40.A60.75.(A).(EX).4.--.C 37.4 (948) 22.5 (570) 7.3 (186) 17.7 (450) 15.7 (400) 31.6 (803) 5.9 (150) 0.9 (22)
SL1.40.A60.100.(A).(EX).4.--.C 39.9 (1.013) 22.5 (570) 7.3 (186) 17.7 (450) 15.7 (400) 31.6 (803) 5.9 (150) 0.9 (22)

94
SL1, SLV pumps
11
SLV pumps

Dimensions
V1 V2 V3 V4 V5 V6 V7 V∅
Pump type in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm)
SLV.25.A25.30.(A).(EX).2.--.C 32 (812) 15.4 (389) 5 (128) 13 (330) 11 (280) 20 (509) 2.6 (65) 0.7 (18)
SLV.25.A25.40.(A).(EX).2.--.C 32 (812) 15.4 (389) 5 (128) 13 (330) 11 (280) 20 (509) 2.6 (65) 0.7 (18)
SLV.25.A25.55.(A).(EX).2.--.C 33.4 (846) 15.5 (393) 5 (128) 13 (330) 11 (280) 22.4 (569) 2.6 (65) 0.7 (18)
SLV.25.A30.30.(A).(EX).2.--.C 32.1 (813) 16 (405) 5 (128) 13 (330) 11 (280) 20.2 (513) 3.2 (80) 0.7 (18)
SLV.25.A30.40.(A).(EX).2.--.C 32.1 (813) 16 (405) 5 (128) 13 (330) 11 (280) 20.2 (513) 3.2 (80) 0.7 (18)
SLV.25.A30.55.(A).(EX).2.--.C 33.4 (846) 16.1 (408) 5 (128) 13 (330) 11 (280) 22.5 (571) 3.2 (80) 0.7 (18)
SLV.30.A30.15.(A).(EX).4.--.C 33.1 (839) 16.2 (411) 5 (128) 13 (330) 11 (280) 20.7 (525) 3.2 (80) 0.7 (18)
SLV.30.A30.18.(A).(EX).4.--.C 33.1 (839) 16.2 (411) 5 (128) 13 (330) 11 (280) 20.7 (525) 3.2 (80) 0.7 (18)
SLV.30.A30.20.(A).(EX).4.--.C 33.1 (839) 16.2 (411) 5 (128) 13 (330) 11 (280) 20.7 (525) 3.2 (80) 0.7 (18)
SLV.30.A30.30.(A).(EX).4.--.C 33.1 (839) 16.2 (411) 5 (128) 13 (330) 11 (280) 20.7 (525) 3.2 (80) 0.7 (18)
SLV.30.A30.55.(A).(EX).2.--.C 34.4 (872) 16 (406) 5 (128) 13 (330) 11 (280) 22.5 (572) 3.2 (80) 0.7 (18)
SLV.30.A30.55.(A).(EX).4.--.C 34.5 (876) 16.2 (411) 5 (128) 13 (330) 11 (280) 22.7 (576) 3.2 (80) 0.7 (18)
SLV.30.A30.80.(A).(EX).2.--.C 34.7 (879) 16 (406) 5 (128) 13 (330) 11 (280) 22.5 (572) 3.2 (80) 0.7 (18)
SLV.30.A30.100.(A).(EX).2.--.C 34.7 (879) 16 (406) 5 (128) 13 (330) 11 (280) 22.5 (572) 3.2 (80) 0.7 (18)
SLV.30.A30.125.(A).(EX).2.--.C 35.9 (910) 16.8 (425) 5 (128) 13 (330) 11 (280) 23.8 (605) 3.2 (80) 0.7 (18)
SLV.30.A30.150.(A).(EX).2.--.C 35.9 (910) 16.8 (425) 5 (128) 13 (330) 11 (280) 23.8 (605) 3.2 (80) 0.7 (18)
SLV.30.A40.15.(A).(EX).4.--.C 33.1 (839) 15 (381) 5 (128) 13 (330) 11 (280) 22.4 (570) 3.9 (100) 0.7 (18)
SLV.30.A40.18.(A).(EX).4.--.C 33.1 (839) 15 (381) 5 (128) 13 (330) 11 (280) 22.4 (570) 3.9 (100) 0.7 (18)
SLV.30.A40.20.(A).(EX).4.--.C 33.1 (839) 15 (381) 5 (128) 13 (330) 11 (280) 22.4 (570) 3.9 (100) 0.7 (18)
SLV.30.A40.30.(A).(EX).4.--.C 33.1 (839) 15 (381) 5 (128) 13 (330) 11 (280) 22.4 (570) 3.9 (100) 0.7 (18)
SLV.30.A40.55.(A).(EX).2.--.C 34.4 (872) 14.8 (376) 5 (128) 13 (330) 11 (280) 24.8 (629) 3.9 (100) 0.7 (18)
SLV.30.A40.55.(A).(EX).4.--.C 34.5 (876) 145 (381) 5 (128) 13 (330) 11 (280) 24.4 (621) 3.9 (100) 0.7 (18)
SLV.30.A40.80.(A).(EX).2.--.C 34.7 (879) 14.8 (376) 5 (128) 13 (330) 11 (280) 24.8 (629) 3.9 (100) 0.7 (18)
SLV.30.A40.100.(A).(EX).2.--.C 34.7 (879) 14.8 (376) 5 (128) 13 (330) 11 (280) 24.8 (629) 3.9 (100) 0.7 (18)
SLV.30.A40.125.(A).(EX).2.--.C 35.9 (910) 15.6 (395) 5 (128) 13 (330) 11 (280) 26.1 (662) 3.9 (100) 0.7 (18)
SLV.30.A40.150.(A).(EX).2.--.C 35.9 (910) 15.6 (395) 5 (128) 13 (330) 11 (280) 26.1 (662) 3.9 (100) 0.7 (18)
SLV.40.A40.40.(A).(EX).4.--.C 34.2 (867) 16.1 (408) 5.1 (130) 14 (355) 11.8 (300) 24.4 (620) 3.9 (100) 0.7 (19)
SLV.40.A40.55.(A).(EX).4.--.C 35 (889) 16.1 (408) 5.1 (130) 14 (355) 11.8 (300) 24.4 (620) 3.9 (100) 0.7 (19)
SLV.40.A40.75.(A).(EX).4.--.C 35.3 (896) 16.1 (408) 5.1 (130) 14 (355) 11.8 (300) 24.4 (620) 3.9 (100) 0.7 (19)
SLV.40.A40.100.(A).(EX).4.--.C 38.3 (972) 16.5 (419) 5.1 (130) 14 (355) 11.8 (300) 25.7 (653) 3.9 (100) 0.7 (19)

95
 SL1, SLV pumps
12
12. Dimensions
Dimensions

Auto-coupling installation
Z7

Z8
Z9

Z10

Z15

ZDN1

Z11

Z23
S3OPR

Z12a
Z16

ZM Z14

TM04 2794 0917

Z2
Z3

Z4
Z6

SL1 pumps
Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 Z23 S30PR
ZDN1
Pump type [in [in [in [in [in [in [in [in [in [in [in [in [in [in
ANSI (DIN)
[in ZM
(mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)]
8.3 3.7 5.5 27.6 20.3 14.3 3.2 1.5 29.1 3.8 0.1 6.9 10.5 20.3 2.5'' 18.2
SL1.20.A25.30.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (700) (514) (364) (81) (40) (738) (97) (1) (175) (266) (516) (DN 65) (463)
8.3 3.7 5.5 27.6 20.3 14.3 3.2 1.5 29.1 3.8 0.1 6.9 10.5 20.3 2.5'' 18.4
SL1.20.A25.40.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (700) (514) (364) (81) (40) (738) (97) (1) (175) (266) (516) (DN 65) (468)
8.3 3.7 5.5 29.2 21.9 14.8 3.2 1.5 30.5 3.8 0.1 6.9 10.5 21.7 2.5'' 18.1
SL1.20.A25.55.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (741) (555) (375) (81) (40) (774) (97) (1) (175) (266) (552) (DN 65) (460)
8.7 3.7 6.3 28.3 20.7 14.8 3.2 1.5 30.4 5.2 0.51 6.7 13.6 20.3 19.5
SL1.20.A30.30.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (719) (526) (376) (81) (40) (772) (131) (13) (171) (345) (516) (495)
8.7 3.7 6.3 28.3 20.7 14.8 3.2 1.5 30.4 5.2 0.5 6.7 13.6 20.3 19.7
SL1.20.A30.40.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (719) (526) (376) (81) (40) (772) (131) (13) (171) (345) (516) (500)
8.7 3.7 6.3 29.9 22.4 15.2 3.2 1.5 31.8 5.2 0.5 6.7 13.6 21.7 19.5
SL1.20.A30.55.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (760) (567) (387) (81) (40) (808) (131) (13) (171) (345) (552) (495)
8.7 3.7 6.3 31 23.5 17 3.2 1.5 31.3 4.4 0.5 6.7 13.6 21.9 20.2
SL1.30.A30.20.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (788) (595) (432) (81) (40) (793) (111) (13) (171) (345) (557) (513)
8.7 3.7 6.3 31 23.5 17 3.2 1.5 31.3 4.4 0.5 6.7 13.6 21.9 20.4
SL1.30.A30.30.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (788) (595) (432) (81) (40) (793) (111) (13) (171) (345) (557) (518)
8.7 3.7 6.3 33.8 26.2 18.9 3.2 1.5 31.3 3.2 0.5 6.7 13.6 23.1 20.2
SL1.30.A30.40.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (858) (665) (479) (81) (40) (793) (82) (13) (171) (345) (586) (512)
8.7 3.7 6.3 33.8 26.2 18.9 3.2 1.5 32.7 3.2 0.5 6.7 13.6 24.5 20.4
SL1.30.A30.55.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (858) (665) (479) (81) (40) (830) (82) (13) (171) (345) (623) (517)
8.7 3.7 6.3 33.8 26.2 18.9 3.2 1.5 33 3.2 0.5 6.7 13.6 23.4 20
SL1.30.A30.75.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (858) (665) (479) (81) (40) (837) (82) (13) (171) (345) (595) (507)
8.7 3.7 6.3 34.8 27.2 19.2 3.2 1.5 35.5 3.2 0.5 6.7 13.6 25.9 20.8
SL1.30.A30.100.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (883) (690) (488) (81) (40) (900) (82) (13) (171) (345) (658) (528)
10.2 4.3 8.7 34.6 25.7 19.3 4.3 32.8 5.9 8.7 16.3 21.9 21.8
SL1.30.A40.20.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (878) (652) (489) (110) (832) (150) (220) (413) (557) (553)
10.2 4.3 8.7 34.6 25.7 19.3 4.3 32.8 5.9 8.7 16.3 21.9 22
SL1.30.A40.30.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (878) (652) (489) (110) (832) (150) (220) (413) (557) (558)
10.2 4.3 8.7 37.3 28.5 21.1 4.3 33.5 4.9 8.7 16.3 23.7 21.9
SL1.30.A40.40.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (948) (722) (536) (110) (851) (125) (220) (413) (601) (555)
10.2 4.3 8.7 37.3 28.5 21.1 4.3 34.37 4.9 8.7 16.3 24.5 22
SL1.30.A40.55.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (948) (722) (536) (110) (873) (125) (220) (413) (623) (560)
10.2 4.3 8.7 37.3 28.5 21.1 4.3 34.7 4.9 8.7 16.3 23.4 21.7
SL1.30.A40.75.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (948) (722) (536) (110) (880) (125) (220) (413) (595) (550)

96
SL1, SLV pumps
12

Dimensions
Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 Z23 S30PR
ZDN1
Pump type [in [in [in [in [in [in [in [in [in [in [in [in [in [in
ANSI (DIN)
[in ZM
(mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)]
10.2 4.3 8.7 38.3 29.5 21.5 4.3 37.1 4.9 8.7 16.3 25.9 22.2
SL1.30.A40.100.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (973) (747) (545) (110) (942) (124) (220) (413) (658) (565)
10.2 4.3 8.7 38.7 29.9 21.1 4.3 34.7 4.9 8.7 16.3 24.8 22.5
SL1.40.A40.55.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (984) (758) (537) (110) (880) (125) (220) (413) (630) (572)
10.2 4.3 8.7 38.7 29.9 21.1 4.3 35 4.9 8.7 16.3 23.7 22.1
SL1.40.A40.75.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (984) (758) (537) (110) (887) (125) (220) (413) (602) (562)
10.2 4.3 8.7 38.7 29.9 20.8 4.3 37.5 4.9 8.7 16.3 26.3 22.7
SL1.40.A40.100.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (984) (758) (529) (110) (952) (125) (220) (413) (667) (576)
11.8 4.3 11 43 31 22 4.3 36.18 6.5 11 17.7 24.8 24.1
SL1.40.A60.55.(A).(EX).4.--.C 2 (50) 0 (0) 6'' (DN 150) 4 x M16
(300) (110) (280) (1093) (780) (559) (110) (919) (164) (280) (450) (630) (611)
11.8 4.3 11 43 30.8 22 4.3 36.5 6.5 11 17.7 23.7 23.7
SL1.40.A60.75.(A).(EX).4.--.C 2 (50) 0 (0) 6'' (DN 150) 4 x M16
(300) (110) (280) (1093) (780) (559) (110) (926) (164) (280) (450) (602) (601)
11.8 4.3 11 43 30.8 21.5 4.3 39.1 6.5 11 17.7 26.3 24.2
SL1.40.A60.100.(A).(EX).4.--.C 2 (50) 0 (0) 6'' (DN 150) 4 x M16
(300) (110) (280) (1093) (780) (545) (110) (991) (164) (280) (450) (667) (615)

SLV pumps
Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 Z23 S30PR
ZDN1
Pump type [in [in [in [in [in [in [in [in [in [in [in [in [in [in
ANSI (DIN)
[in ZM
(mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)]
8.3 3.7 5.5 28.7 21.5 15.5 3.2 1.5 29.5 2.5 0.1 6.9 10.5 22 2.5'' 18.9
SLV.25.A25.30.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (730) (544) (394) (81) (40) (748) (64) (1) (175) (266) (559) (DN 65) (479)
8.3 3.7 5.5 28.7 21.5 15.5 3.2 1.5 29.5 2.5 0.1 6.9 10.5 22 2.5'' 19.1
SLV.25.A25.40.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (730) (544) (394) (81) (40) (748) (64) (1) (175) (266) (559) (DN 65) (485)
8.3 3.7 5.5 31.1 23.8 16.7 3.2 1.5 30.7 2.4 0.1 6.9 10.5 23.3 2.5'' 18.7
SLV.25.A25.55.(A).(EX).2.--.C 4 x M16
(210) (95) (140) (790) (604) (424) (81) (40) (778) (60) (1) (175) (266) (593) (DN 65) (476)
8.7 3.7 6.3 29.5 22 16 3.2 1.5 30.8 3.8 0.51 6.7 13.6 22 20.2
SLV.25.A30.30.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (750) (557) (407) (81) (40) (782) (97) (13) (171) (345) (560) (513)
8.7 3.7 6.3 29.5 22 16 3.2 1.5 30.8 3.8 0.6 6.7 13.6 22 20.4
SLV.25.A30.40.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (750) (557) (407) (81) (40) (782) (97) (13) (171) (345) (560) (518)
8.7 3.7 6.3 31.8 24.3 17.2 3.2 1.5 32 3.7 0.6 6.7 13.6 23.3 20.1
SLV.25.A30.55.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (808) (615) (436) (81) (40) (812) (94) (13) (171) (345) (593) (510)
8.7 3.7 6.3 30 22.4 15.8 3.2 1.5 31.6 3.6 0.6 6.7 13.6 23.1 20.7
SLV.30.A30.15.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (762) (569) (401) (81) (40) (802) (91) (13) (171) (345) (586) (526)
8.7 3.7 6.3 30 22.4 15.8 3.2 1.5 31.6 3.6 0.6 6.7 13.6 23.1 20.7
SLV.30.A30.18.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (762) (569) (401) (81) (40) (802) (91) (13) (171) (345) (586) (526)
8.7 3.7 6.3 30 22.4 15.8 3.2 1.5 31.6 3.6 0.6 6.7 13.6 23.1 20.7
SLV.30.A30.20.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (762) (569) (401) (81) (40) (802) (91) (13) (171) (345) (586) (526)
8.7 3.7 6.3 30 22.4 15.8 3.2 1.5 31.6 3.6 0.6 6.7 13.6 23.1 20.9
SLV.30.A30.30.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (762) (569) (401) (81) (40) (802) (91) (13) (171) (345) (586) (531)
8.7 3.7 6.3 31.9 24.3 17.2 3.2 1.5 33.1 3.8 0.6 6.7 13.6 24.4 21.1
SLV.30.A30.55.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (809) (616) (436) (81) (40) (840) (96) (13) (171) (345) (619) (537)
8.7 3.7 6.3 32 24.5 16.8 3.2 1.5 33.1 3.6 0.6 6.7 13.6 24.5 21.1
SLV.30.A30.55.(A).(EX).4.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (813) (620) (427) (81) (40) (839) (91) (13) (171) (345) (623) (537)
8.7 3.7 6.3 31.9 24.3 17.2 3.2 1.5 33.4 3.8 0.6 6.7 13.6 23.3 20.7
SLV.30.A30.80.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (809) (616) (436) (81) (40) (847) (96) (13) (171) (345) (591) (527)
8.7 3.7 6.3 31.9 24.3 17.2 3.2 1.5 33.4 3.8 0.6 6.7 13.6 23.3 20.7
SLV.30.A30.100.(A).(EX).2.--.C 3'' (DN 80) 4 x M16
(220) (95) (160) (809) (616) (436) (81) (40) (847) (96) (13) (171) (345) (591) (527)
8.7 3.7 6.3 33.2 25.6 17.8 3.2 1.5 33.9 0.6 6.7 13.6 24.5 21.1
SLV.30.A30.125.(A).(EX).2.--.C 3 (77) 3'' (DN 80) 4 x M16
(220) (95) (160) (842) (649) (453) (81) (40) (859) (13) (171) (345) (622) (535)
8.7 3.7 6.3 33.2 25.6 17.8 3.2 1.5 33.9 0.6 6.7 13.6 24.5 21.1
SLV.30.A30.150.(A).(EX).2.--.C 3 (77) 3'' (DN 80) 4 x M16
(220) (95) (160) (842) (649) (453) (81) (40) (859) (13) (171) (345) (622) (535)
10.3 4.3 8.7 33.5 24.6 18 4.3 33.2 5.2 8.7 16.3 23.1 22.4
SLV.30.A40.15.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (850) (624) (458) (110) (842) (131) (220) (413) (586) (569)
10.3 4.3 8.7 33.5 24.6 18 4.3 33.2 5.2 8.7 16.3 23.1 22.4
SLV.30.A40.18.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (850) (624) (458) (110) (842) (131) (220) (413) (586) (569)
10.3 4.3 8.7 33.5 24.6 18 4.3 33.2 5.2 8.7 16.3 23.1 22.4
SLV.30.A40.20.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (850) (624) (458) (110) (842) (131) (220) (413) (586) (569)
10.3 4.3 8.7 33.5 24.6 18 4.3 33.2 5.2 8.7 16.3 23.1 22.6
SLV.30.A40.30.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (850) (624) (458) (110) (842) (131) (220) (413) (586) (574)
10.3 4.3 8.7 35.8 26.9 19.8 4.3 34.7 5.4 8.7 16.3 24.4 22.4
SLV.30.A40.55.(A).(EX).2.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (909) (683) (503) (110) (880) (136) (220) (413) (619) (570)
10.3 4.3 8.7 35.5 26.6 19.1 4.3 34.7 5.2 8.7 16.3 24.5 22.4
SLV.30.A40.55.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (901) (675) (484) (110) (879) (131) (220) (413) (623) (570)
10.3 4.3 8.7 35.8 26.9 19.8 4.3 35 5.4 8.7 16.3 23.3 22.0
SLV.30.A40.80.(A).(EX).2.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (909) (683) (503) (110) (887) (136) (220) (413) (591) (560)
10.3 4.3 8.7 35.8 26.9 19.8 4.3 35 5.4 8.7 16.3 23.3 22.0
SLV.30.A40.100.(A).(EX).2.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (909) (683) (503) (110) (887) (136) (220) (413) (591) (560)
10.3 4.3 8.7 37.1 28.2 20.5 4.3 35.4 4.6 8.7 16.3 24.5 22.5
SLV.30.A40.125.(A).(EX).2.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (942) (716) (520) (110) (899) (117) (220) (413) (622) (571)
10.3 4.3 8.7 37.1 28.2 20.5 4.3 35.4 4.6 8.7 16.3 24.5 22.5
SLV.30.A40.150.(A).(EX).2.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (942) (716) (520) (110) (899) (117) (220) (413) (622) (571)
10.3 4.3 8.7 35.4 26.6 19.4 4.3 33.2 4.2 8.7 16.3 24.1 21.7
SLV.40.A40.40.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (900) (674) (494) (110) (843) (106) (220) (413) (612) (552)
10.3 4.3 8.7 35.4 26.6 19.4 4.3 34.1 4.2 8.7 16.3 25 21.9
SLV.40.A40.55.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (900) (674) (494) (110) (865) (106) (220) (413) (634) (557)
10.3 4.3 8.7 35.4 26.6 19.4 4.3 34.33 4.2 8.7 16.3 23.9 21.5
SLV.40.A40.75.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (900) (674) (494) (110) (872) (106) (220) (413) (606) (547)
10.3 4.3 8.7 36.7 27.9 20.1 4.3 37 3.7 8.7 16.3 26.9 21.9
SLV.40.A40.100.(A).(EX).4.--.C 2 (50) 0 (0) 4'' (DN 100) 4 x M16
(260) (110) (220) (933) (707) (511) (110) (937) (95) (220) (413) (682) (555)

97
 SL1, SLV pumps
12
Free standing installation (without ring stand)
Dimensions

F
Dc10

D1n DØ1

A
DN2

TM04 2793 5116

H

Dc02
E
C D2n DØ2 DN1

SL1 pumps
A C D E F H Dc10 Dc02
DN1 DN2 D2n D∅2
Pump type [in [in [in [in [in [in
ANSI (DIN)
[in D1n D∅1
ANSI (DIN)
[in
[in (mm)]
(mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)]
25.2 14.4 6.7 8.5 12.6 5.5 5.5
SL1.20.A25.30.(A).(EX).2.--.C 3.7 (69) 2.5'' (DN 65) 4 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(641) (366) (171) (216) (321) (140) (140)
25.2 14.4 6.7 8.5 12.6 5.5 5.5
SL1.20.A25.40.(A).(EX).2.--.C 3.7 (69) 2.5'' (DN 65) 4 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(641) (366) (171) (216) (321) (140) (140)
26.7 16 7.9 8.9 14.9 5.5 5.5
SL1.20.A25.55.(A).(EX).2.--.C 3.7 (69) 2.5'' (DN 65) 4 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(677) (407) (200) (227) (379) (140) (140)
25.2 14.4 6.7 8.5 12.6 5.5
SL1.20.A30.30.(A).(EX).2.--.C 3.9 (69) 2.5'' (DN 65) 4 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(641) (366) (171) (216) (321) (140)
25.2 14.4 6.7 8.5 12.6 5.5
SL1.20.A30.40.(A).(EX).2.--.C 3.9 (69) 2.5'' (DN 65) 4 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(641) (366) (171) (216) (321) (140)
26.7 16 7.9 8.9 14.9 5.5
SL1.20.A30.55.(A).(EX).2.--.C 3.9 (69) 2.5'' (DN 65) 4 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(677) (407) (200) (227) (379) (140)
26.9 17.1 6.7 10.7 13.7 7.5
SL1.30.A30.20.(A).(EX).4.--.C 3.9 (89) 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(682) (435) (171) (272) (347) (191)
26.9 17.1 6.7 10.7 13.7 7.5
SL1.30.A30.30.(A).(EX).4.--.C 3.9 (89) 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(682) (435) (171) (272) (347) (191)
28 19.9 7.9 12.6 15.6 4.6 7.5
SL1.30.A30.40.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(711) (505) (200) (319) (397) (118) (191)
29.4 19.9 7.9 12.6 15.6 4.6 7.5
SL1.30.A30.55.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(748) (505) (200) (319) (397) (118) (191)
29.7 19.9 7.9 12.6 15.6 4.6 7.5
SL1.30.A30.75.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(755) (505) (200) (319) (397) (118) (191)
32.2 20.9 8.5 12.9 16.7 4.6 7.5
SL1.30.A30.100.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(818) (530) (217) (328) (423) (118) (191)
26.9 17.1 6.7 10.7 13.7 7.5 7.5
SL1.30.A40.20.(A).(EX).4.--.C 4.4 (90) 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(682) (435) (171) (272) (347) (191) (191)
26.9 17.1 6.7 10.7 13.7 7.5 7.5
SL1.30.A40.30.(A).(EX).4.--.C 4.4 (90) 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(682) (435) (171) (272) (347) (191) (191)
28.6 19.9 7.9 12.6 15.6 4.6 7.5 7.5
SL1.30.A40.40.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(726) (505) (200) (319) (397) (115) (191) (191)
29.4 19.9 7.9 12.6 15.6 4.6 7.5 7.5
SL1.30.A40.55.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(748) (505) (200) (319) (397) (115) (191) (191)
29.7 19.9 7.9 12.6 15.6 4.6 7.5 7.5
SL1.30.A40.75.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(755) (505) (200) (319) (397) (115) (191) (191)

98
SL1, SLV pumps
12

Dimensions
A C D E F H Dc10 Dc02
DN1 DN2 D2n D∅2
Pump type [in [in [in [in [in [in
ANSI (DIN)
[in D1n D∅1
ANSI (DIN)
[in
[in (mm)]
(mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)]
32.2 20.9 8.5 12.9 16.7 4.6 7.5 7.5
SL1.30.A40.100.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(818) (530) (217) (328) (423) (116) (191) (191)
29.7 21.3 7.9 12.6 17.2 4.5 9.5 7.5
SL1.40.A40.55.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 4'' (DN 100) 8 x 0.75 (19.1)
(755) (541) (200) (320) (438) (115) (242) (191)
30 21.3 7.9 12.6 17.2 4.5 9.5 7.5
SL1.40.A40.75.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 4'' (DN 100) 8 x 0.75 (19.1)
(762) (541) (200) (320) (438) (115) (242) (191)
32.6 21.3 8.5 12.3 18.2 4.5 9.5 7.5
SL1.40.A40.100.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 4'' (DN 100) 8 x 0.75 (19.1)
(827) (541) (217) (312) (462) (115) (242) (191)
29.7 21.3 7.9 12.6 17.3 4.4 9.5 9.5
SL1.40.A60.55.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 6'' (DN 150) 8 x 0.88 (22.1)
(755) (541) (200) (320) (440) (111) (242) (242)
30 21.3 7.9 12.6 17.3 4.4 9.5 9.5
SL1.40.A60.75.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 6'' (DN 150) 8 x 0.88 (22.1)
(762) (541) (200) (320) (440) (111) (242) (242)
32.6 21.3 8.5 12 18.6 4.4 9.5 9.5
SL1.40.A60.100.(A).(EX).4.--.C 6'' (DN 150) 8 x M20 6'' (DN 150) 8 x 0.88 (22.1)
(827) (541) (217) (306) (472) (111) (242) (242)

SLV pumps
A C D E F H Dc10 Dc02
DN1 DN2 D2n D∅2
Pump type [in [in [in [in [in [in
ANSI (DIN)
[in D1n D∅1
ANSI (DIN)
[in
[in (mm)]
(mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)] (mm)]
26.9 15.6 6.7 9.7 12.6 5.5
SLV.25.A25.30.(A).(EX).2.--.C 4 (102) 3'' (DN 80) 6 (153) 8 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(684) (396) (171) (246) (321) (140)
26.9 15.6 6.7 9.7 12.6 5.5
SLV.25.A25.40.(A).(EX).2.--.C 4 (102) 3'' (DN 80) 6 (153) 8 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(684) (396) (171) (246) (321) (140)
28.3 18 7.9 10.9 15 4.2 5.5
SLV.25.A25.55.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 2.5'' (DN 65) 4 x 0.75 (19.1)
(718) (456) (200) (276) (380) (106) (140)
27 15.6 6.7 9.7 12.6 4.1
SLV.25.A30.30.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(685) (397) (171) (247) (321) (103)
27 15.6 6.7 9.7 12.6 4.1
SLV.25.A30.40.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(685) (397) (171) (247) (321) (103)
28.3 17.9 7.9 10.9 14.9 4.2
SLV.25.A30.55.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(718) (455) (200) (276) (379) (106)
28 16.1 6.7 9.5 13.4 4.3
SLV.30.A30.15.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(711) (409) (171) (241) (339) (109)
28 16.1 6.7 9.5 13.4 4.3
SLV.30.A30.18.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(711) (409) (171) (241) (339) (109)
28 16.1 6.7 9.5 13.4 4.3
SLV.30.A30.20.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(711) (409) (171) (241) (339) (109)
28 16.1 6.7 9.5 13.4 4.3
SLV.30.A30.30.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(711) (409) (171) (241) (339) (109)
29.3 18 7.9 10.9 15 4.1
SLV.30.A30.55.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(744) (456) (200) (276) (380) (104)
29.5 18.1 7.9 10.5 15.5 4.3
SLV.30.A30.55.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(748) (460) (200) (267) (393) (109)
29.6 18 7.9 10.9 15 4.1
SLV.30.A30.80.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(751) (456) (200) (276) (380) (104)
29.6 18 7.9 10.9 15 4.1
SLV.30.A30.100.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(751) (456) (200) (276) (380) (104)
30.8 19.3 8.5 11.5 16.3 4.8
SLV.30.A30.125.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(782) (489) (217) (293) (413) (123)
30.8 19.3 8.5 11.5 16.3 4.8
SLV.30.A30.150.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 3'' (DN 80) 6 (153) 8 x 0.75 (19.1)
(782) (489) (217) (293) (413) (123)
28 16 6.7 9.5 13.3 4.3 7.5
SLV.30.A40.15.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(711) (407) (171) (241) (337) (109) (191)
28 16 6.7 9.5 13.3 4.3 7.5
SLV.30.A40.18.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(711) (407) (171) (241) (337) (109) (191)
28 16 6.7 9.5 13.3 4.3 7.5
SLV.30.A40.20.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(711) (407) (171) (241) (337) (109) (191)
28 16 6.7 9.5 13.3 4.3 7.5
SLV.30.A40.30.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(711) (407) (171) (241) (337) (109) (191)
29.3 18.4 7.9 11.3 15 4.1 7.5
SLV.30.A40.55.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(744) (466) (200) (286) (380) (104) (191)
29.5 18 7.9 10.5 15.4 4.3 7.5
SLV.30.A40.55.(A).(EX).4.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(748) (458) (200) (267) (391) (109) (191)
29.6 18.4 7.9 11.3 15 4.1 7.5
SLV.30.A40.80.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(751) (466) (200) (286) (380) (104) (191)
29.6 18.4 7.9 11.3 15 4.1 7.5
SLV.30.A40.100.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(751) (466) (200) (286) (380) (104) (191)
30.8 19.7 8.5 11.9 16.3 4.8 7.5
SLV.30.A40.125.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(782) (499) (217) (303) (413) (123) (191)
30.8 19.7 8.5 11.9 16.3 4.8 7.5
SLV.30.A40.150.(A).(EX).2.--.C 3'' (DN 80) 6 (153) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(782) (499) (217) (303) (413) (123) (191)
29 18 7.9 10.9 15 5.3 7.5 7.5
SLV.40.A40.40.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(737) (457) (200) (277) (380) (134) (191) (191)
29.9 18 7.9 10.9 15 5.3 7.5 7.5
SLV.40.A40.55.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(759) (457) (200) (277) (380) (134) (191) (191)
30.2 18 7.9 10.9 15 5.3 7.5 7.5
SLV.40.A40.75.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(766) (457) (200) (277) (380) (134) (191) (191)
33.2 19.3 8.5 11.6 16.3 5.7 7.5 7.5
SLV.40.A40.100.(A).(EX).4.--.C 4'' (DN 100) 8 x M16 4'' (DN 100) 8 x 0.75 (19.1)
(842) (490) (217) (294) (413) (145) (191) (191)

99
 SL1, SLV pumps
12
Free standing installation (with ring stand)
Dimensions

TM04 2795 3008

SL1 pumps
V1 V2 V3 V4 V5 V6 V7 V∅
Pump type [in (mm)] [in (mm)] [in (mm)] [in (mm)] [in (mm)] [in (mm)] [in (mm)] [in (mm)]
SL1.20.A25.30.(A).(EX).2.--.C 31 (771) 14.1 (358) 5.1 (130) 12.8 (325) 10.6 (270) 18.8 (479) 2.6 (65) 0.7 (19)
SL1.20.A25.40.(A).(EX).2.--.C 31 (771) 14.1 (358) 5.1 (130) 12.8 (325) 10.6 (270) 18.8 (479) 2.6 (65) 0.7 (19)
SL1.20.A25.55.(A).(EX).2.--.C 31.8 (807) 14.1 (358) 5.1 (130) 12.8 (325) 10.6 (270) 20.5 (520) 2.6 (65) 0.7 (19)
SL1.20.A30.30.(A).(EX).2.--.C 31 (771) 14.7 (373) 5.1 (130) 12.8 (325) 10.6 (270) 19 (482) 3.2 (80) 0.7 (19)
SL1.20.A30.40.(A).(EX).2.--.C 31 (771) 14.7 (373) 5.1 (130) 12.8 (325) 10.6 (270) 19 (482) 3.2 (80) 0.7 (19)
SL1.20.A30.55.(A).(EX).2.--.C 31.8 (807) 14.7 (373) 5.1 (130) 12.8 (325) 10.6 (270) 20.6 (523) 3.2 (80) 0.7 (19)
SL1.30.A30.20.(A).(EX).4.--.C 32 (812) 15.5 (393) 5.1 (130) 14 (355) 11.8 (300) 21.7 (551) 3.2 (80) 0.7 (19)
SL1.30.A30.30.(A).(EX).4.--.C 32 (812) 15.5 (393) 5.1 (130) 14 (355) 11.8 (300) 21.7 (551) 3.2 (80) 0.7 (19)
SL1.30.A30.40.(A).(EX).4.--.C 33.1 (841) 16.6 (422) 5.1 (130) 14 (355) 11.8 (300) 24.4 (621) 3.2 (80) 0.7 (19)
SL1.30.A30.55.(A).(EX).4.--.C 34.6 (878) 16.6 (422) 5.1 (130) 14 (355) 11.8 (300) 24.4 (621) 3.2 (80) 0.7 (19)
SL1.30.A30.75.(A).(EX).4.--.C 34.9 (885) 16.6 (422) 5.1 (130) 14 (355) 11.8 (300) 24.4 (621) 3.2 (80) 0.7 (19)
SL1.30.A30.100.(A).(EX).4.--.C 37.4 (948) 16.6 (422) 5.1 (130) 14 (355) 11.8 (300) 25.4 (646) 3.2 (80) 0.7 (19)
SL1.30.A40.20.(A).(EX).4.--.C 32 (812) 14.4 (364) 5.1 (130) 14 (355) 11.8 (300) 23.5 (598) 3.9 (100) 0.7 (19)
SL1.30.A40.30.(A).(EX).4.--.C 32 (812) 14.4 (364) 5.1 (130) 14 (355) 11.8 (300) 23.5 (598) 3.9 (100) 0.7 (19)
SL1.30.A40.40.(A).(EX).4.--.C 33.7 (856) 15.3 (389) 5.1 (130) 14 (355) 11.8 (300) 26.3 (668) 3.9 (100) 0.7 (19)
SL1.30.A40.55.(A).(EX).4.--.C 34.6 (878) 15.3 (389) 5.1 (130) 14 (355) 11.8 (300) 26.3 (668) 3.9 (100) 0.7 (19)
SL1.30.A40.75.(A).(EX).4.--.C 34.9 (885) 15.3 (389) 5.1 (130) 14 (355) 11.8 (300) 26.3 (668) 3.9 (100) 0.7 (19)
SL1.30.A40.100.(A).(EX).4.--.C 37.4 (948) 15.4 (390) 5.1 (130) 14 (355) 11.8 (300) 27.3 (693) 3.9 (100) 0.7 (19)
SL1.40.A40.55.(A).(EX).4.--.C 37.1 (941) 17.5 (445) 7.3 (186) 17.7 (450) 15.7 (400) 27.7 (704) 3.9 (100) 0.9 (22)
SL1.40.A40.75.(A).(EX).4.--.C 37.4 (948) 17.5 (445) 7.3 (186) 17.7 (450) 15.7 (400) 27.7 (704) 3.9 (100) 0.9 (22)
SL1.40.A40.100.(A).(EX).4.--.C 39.9 (1013) 17.5 (445) 7.3 (186) 17.7 (450) 15.7 (400) 27.7 (704) 3.9 (100) 0.9 (22)
SL1.40.A60.55.(A).(EX).4.--.C 37.1 (941) 22.5 (570) 7.3 (186) 17.7 (450) 15.7 (400) 31.6 (803) 5.9 (150) 0.9 (22)
SL1.40.A60.75.(A).(EX).4.--.C 37.4 (948) 22.5 (570) 7.3 (186) 17.7 (450) 15.7 (400) 31.6 (803) 5.9 (150) 0.9 (22)
SL1.40.A60.100.(A).(EX).4.--.C 39.9 (1.013) 22.5 (570) 7.3 (186) 17.7 (450) 15.7 (400) 31.6 (803) 5.9 (150) 0.9 (22)

100
SL1, SLV pumps
12
SLV pumps

Dimensions
V1 V2 V3 V4 V5 V6 V7 V∅
Pump type [in (mm)] [in (mm)] [in (mm)] [in (mm)] [in (mm)] [in (mm)] [in (mm)] [in (mm)]
SLV.25.A25.30.(A).(EX).2.--.C 32 (812) 15.4 (389) 5 (128) 13 (330) 11 (280) 20 (509) 2.6 (65) 0.7 (18)
SLV.25.A25.40.(A).(EX).2.--.C 32 (812) 15.4 (389) 5 (128) 13 (330) 11 (280) 20 (509) 2.6 (65) 0.7 (18)
SLV.25.A25.55.(A).(EX).2.--.C 33.4 (846) 15.5 (393) 5 (128) 13 (330) 11 (280) 22.4 (569) 2.6 (65) 0.7 (18)
SLV.25.A30.30.(A).(EX).2.--.C 32.1 (813) 16 (405) 5 (128) 13 (330) 11 (280) 20.2 (513) 3.2 (80) 0.7 (18)
SLV.25.A30.40.(A).(EX).2.--.C 32.1 (813) 16 (405) 5 (128) 13 (330) 11 (280) 20.2 (513) 3.2 (80) 0.7 (18)
SLV.25.A30.55.(A).(EX).2.--.C 33.4 (846) 16.1 (408) 5 (128) 13 (330) 11 (280) 22.5 (571) 3.2 (80) 0.7 (18)
SLV.30.A30.15.(A).(EX).4.--.C 33.1 (839) 16.2 (411) 5 (128) 13 (330) 11 (280) 20.7 (525) 3.2 (80) 0.7 (18)
SLV.30.A30.18.(A).(EX).4.--.C 33.1 (839) 16.2 (411) 5 (128) 13 (330) 11 (280) 20.7 (525) 3.2 (80) 0.7 (18)
SLV.30.A30.20.(A).(EX).4.--.C 33.1 (839) 16.2 (411) 5 (128) 13 (330) 11 (280) 20.7 (525) 3.2 (80) 0.7 (18)
SLV.30.A30.30.(A).(EX).4.--.C 33.1 (839) 16.2 (411) 5 (128) 13 (330) 11 (280) 20.7 (525) 3.2 (80) 0.7 (18)
SLV.30.A30.55.(A).(EX).2.--.C 34.4 (872) 16 (406) 5 (128) 13 (330) 11 (280) 22.5 (572) 3.2 (80) 0.7 (18)
SLV.30.A30.55.(A).(EX).4.--.C 34.5 (876) 16.2 (411) 5 (128) 13 (330) 11 (280) 22.7 (576) 3.2 (80) 0.7 (18)
SLV.30.A30.80.(A).(EX).2.--.C 34.7 (879) 16 (406) 5 (128) 13 (330) 11 (280) 22.5 (572) 3.2 (80) 0.7 (18)
SLV.30.A30.100.(A).(EX).2.--.C 34.7 (879) 16 (406) 5 (128) 13 (330) 11 (280) 22.5 (572) 3.2 (80) 0.7 (18)
SLV.30.A30.125.(A).(EX).2.--.C 35.9 (910) 16.8 (425) 5 (128) 13 (330) 11 (280) 23.8 (605) 3.2 (80) 0.7 (18)
SLV.30.A30.150.(A).(EX).2.--.C 35.9 (910) 16.8 (425) 5 (128) 13 (330) 11 (280) 23.8 (605) 3.2 (80) 0.7 (18)
SLV.30.A40.15.(A).(EX).4.--.C 33.1 (839) 15 (381) 5 (128) 13 (330) 11 (280) 22.4 (570) 3.9 (100) 0.7 (18)
SLV.30.A40.18.(A).(EX).4.--.C 33.1 (839) 15 (381) 5 (128) 13 (330) 11 (280) 22.4 (570) 3.9 (100) 0.7 (18)
SLV.30.A40.20.(A).(EX).4.--.C 33.1 (839) 15 (381) 5 (128) 13 (330) 11 (280) 22.4 (570) 3.9 (100) 0.7 (18)
SLV.30.A40.30.(A).(EX).4.--.C 33.1 (839) 15 (381) 5 (128) 13 (330) 11 (280) 22.4 (570) 3.9 (100) 0.7 (18)
SLV.30.A40.55.(A).(EX).2.--.C 34.4 (872) 14.8 (376) 5 (128) 13 (330) 11 (280) 24.8 (629) 3.9 (100) 0.7 (18)
SLV.30.A40.55.(A).(EX).4.--.C 34.5 (876) 145 (381) 5 (128) 13 (330) 11 (280) 24.4 (621) 3.9 (100) 0.7 (18)
SLV.30.A40.80.(A).(EX).2.--.C 34.7 (879) 14.8 (376) 5 (128) 13 (330) 11 (280) 24.8 (629) 3.9 (100) 0.7 (18)
SLV.30.A40.100.(A).(EX).2.--.C 34.7 (879) 14.8 (376) 5 (128) 13 (330) 11 (280) 24.8 (629) 3.9 (100) 0.7 (18)
SLV.30.A40.125.(A).(EX).2.--.C 35.9 (910) 15.6 (395) 5 (128) 13 (330) 11 (280) 26.1 (662) 3.9 (100) 0.7 (18)
SLV.30.A40.150.(A).(EX).2.--.C 35.9 (910) 15.6 (395) 5 (128) 13 (330) 11 (280) 26.1 (662) 3.9 (100) 0.7 (18)
SLV.40.A40.40.(A).(EX).4.--.C 34.2 (867) 16.1 (408) 5.1 (130) 14 (355) 11.8 (300) 24.4 (620) 3.9 (100) 0.7 (19)
SLV.40.A40.55.(A).(EX).4.--.C 35 (889) 16.1 (408) 5.1 (130) 14 (355) 11.8 (300) 24.4 (620) 3.9 (100) 0.7 (19)
SLV.40.A40.75.(A).(EX).4.--.C 35.3 (896) 16.1 (408) 5.1 (130) 14 (355) 11.8 (300) 24.4 (620) 3.9 (100) 0.7 (19)
SLV.40.A40.100.(A).(EX).4.--.C 38.3 (972) 16.5 (419) 5.1 (130) 14 (355) 11.8 (300) 25.7 (653) 3.9 (100) 0.7 (19)

101
 SL1, SLV pumps
13
13. Accessories
Accessories

Installation systems

SLV.25.A25
SLV.25.A30
SLV.30.A30
SLV.30.A40
SLV.40.A40
SL1.20.A25
SL1.20.A30
SL1.30.A30
SL1.30.A40
SL1.40.A40
SL1.40.A60
Product
Picture Description Dimensions
number

2.5" ● ● 97626234
Complete auto-coupling system,
3" ● ● ● ● 97626236
including guide claw, base plate and
upper guide rail bracket. Cast iron, 3" / 2.5"* ● ● 97626237
epoxy-coated. With bolts, nuts and
gaskets. 4" ● ● ● ● 97626238
TM04 4490 1409

Note: If your guide rails exceed 13

feet (4 m), consider the use of 4" / 3"* ● ● ● ● 97626239
intermediate guide rail brackets to
6" ● 97626240
support your system.
6" / 4"* ● ● ● ● 97626241

2.5" ● ● 96825119
Intermediate guide rail brackets of
TM05 4253 2112

stainless steel (AISI 304). 3" ● ● ● ● 96825142

The size of the intermediate guide
4" ● ● ● ● 96825161
rail bracket depends on the outlet
pipe dimension.
6" ● 96887674

2.5" ● 97632115

2.5" / 3"* ● 97632165

3" / 2.5"* ● 97632219

3" ● ● 97632227
Ring stand with flanged 90 ° elbow
and hose connection. Cast iron, 3" / 4" ● 97632281
epoxy-coated. With bolts, nuts,
gaskets and anchor bolts. 4" / 3" ● 97632229

4" ● ● 97632278
6" / 4",
● 97632370
galvanized steel
6",
● 97632372
galvanized steel
TM04 6086 4809

2.5" ● 97632119

2.5" / 3" ● 97632166

3" / 2.5" ● 97632226

3" ● ● 97632228
Ring stand with flanged 90 ° elbow
and outside thread connection. 3" / 4" ● 97632283
Cast iron, epoxy-coated. With bolts,
nuts, gaskets and anchor bolts. 4" / 3" ● 97632241

4" ● ● 97632280
6" / 4",
● 97632371
galvanized steel
6",
● 97632373
galvanized steel

* Outlet pipe/guide claw, e.g. 3"/2.5" = 3" outlet pipe and 2.5" guide claw.

102
SL1, SLV pumps
13
Other accessories

Accessories
SLV.25.A25

SLV.25.A30

SLV.30.A30

SLV.30.A40

SLV.40.A40
SL1.20.A25

SL1.20.A30

SL1.30.A30

SL1.30.A40

SL1.40.A40

SL1.40.A60
Max.
Picture Description load Product number
[lb (kg)]

13 ft (4 m) hot dip galvanized lifting chain

with lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● ● 98425760
With certificates.
20 ft (6 m) hot dip galvanized lifting chain
with lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● ● 98425781
With certificates.
26 ft (8 m) hot dip galvanized lifting chain
1763
with lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● ● 98425782
(800)
With certificates.
33 ft (10 m) hot dip galvanized lifting chain
TM02 6126 5102

with lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● ● 98425783

With certificates.
40 ft (12 m) hot dip galvanized lifting chain
with lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● ● 96735557
With certificates.
13 ft (4 m) stainless steel lifting chain with
lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● ● 98425797
With certificates.
20 ft (6 m) stainless steel lifting chain with
lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● ● 98425798
With certificates.
26 ft (8 m) stainless steel lifting chain with
1763
lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● ● 98425799
(800)
With certificates.
33 ft (10 m) stainless steel lifting chain with
lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● ● 98425800
With certificates.
40 ft (12 m) stainless steel lifting chain with
lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● ● 96735569
With certificates.

Picture Description Product number

IO 113 98097391
TM05 6793 5112

IO 113 is an input/output interface between controllers and wastewater pumps equipped with sensors
or a sensor board. The most important information is shown on the front panel.

103
 SL1, SLV pumps
13
Level controllers
Accessories

SLC, float-switch-controlled option

Main disconnect
Voltage Motor shaft power Overload range
Description Phase switch required Product number
[VAC] [hp] [A]
[A]
SLC.208/230.B.1-FC 1 208/230 2.0 10.0 - 40.0 15 99165671
SLC.208/230.A.3.A-FC 3 208/230 1.5 - 1.8 2.0 - 6.3 15 99107775
SLC.208/230.B.3.B-FC 3 208/230 2.0 - 3.0 5.7 - 18.9 15 99107776
SLC.208/230.B.3.C-FC 3 208/230 2.0 - 7.5 9.0 - 30 30 99107777
SLC.208/230.C.3.D-FC 3 208/230 8.0 - 10.0 15.0 - 45.0 40 99107778
SLC.208/230.D.3.D-FC 3 208/230 12.5 - 15.0 15.0 - 45.0 60 99107779
SLC.460.E.3.A-FC 3 460 1.5 - 4.0 2.0 - 6.3 15 99107780
SLC.460.F.3.B-FC 3 460 5.5 - 10.0 5.7 - 18.9 20 99107781
SLC.460.D.3.C-FC 3 460 12.5 - 15.0 9.0 - 30.0 25 99107782
SLC.575.G.3.E-FC 3 575 1.5 1.6 - 2.5 15 99153139
SLC.575.H.3.F-FC 3 575 1.8 - 3.0 2.5 - 4.0 15 99153140
SLC.575.I.3.G-FC 3 575 4.0 - 5.5 4.0 - 6.3 15 99153141
SLC.575.J.3.H-FC 3 575 7.5 6.0 - 10.0 20 99153142
SLC.575.C.3.I-FC 3 575 8.0 - 10.0 9.0 - 14.0 20 99153143
SLC.575.D.3.J-FC 3 575 12.5 - 15.0 13.0 - 18.0 25 99153144

SLC, transducer-controlled option

Main disconnect
Voltage Motor shaft power Overload range
Description Phase switch required Product number
[VAC] [hp] [A]
[A]
SLC.208/230.B.1-PT 1 208/230 2.0 10.0 - 40.0 15 99165673
SLC.208/230.A.3.A-PT 3 208/230 1.5 - 1.8 2.0 - 6.3 15 99107059
SLC.208/230.B.3.B-PT 3 208/230 2.0 - 3.0 5.7 - 18.9 15 99107060
SLC.208/230.B.3.C-PT 3 208/230 2.0 - 7.5 9.0 - 30.0 30 99107061
SLC.208/230.C.3.D-PT 3 208/230 8.0 - 10.0 15.0 - 45.0 40 99107062
SLC.208/230.D.3.D-PT 3 208/230 12.5 - 15.0 15.0 - 45.0 60 99107063
SLC.460.E.3.A-PT 3 460 1.5 - 4.0 2.0 - 6.3 15 99107064
SLC.460.F.3.B-PT 3 460 5.5 - 10.0 5.7 - 18.9 20 99107065
SLC.460.D.3.C-PT 3 460 12.5 - 15.0 9.0 - 30.0 25 99107066
SLC.575.G.3.E-PT 3 575 1.5 1.6 - 2.5 15 99153151
SLC.575.H.3.F-PT 3 575 1.8 - 3.0 2.5 - 4.0 15 99153152
SLC.575.I.3.G-PT 3 575 4.0 - 5.5 4.0 - 6.3 15 99153153
SLC.575.J.3.H-PT 3 575 7.5 6.0 - 10.0 20 99153154
SLC.575.C.3.I-PT 3 575 8.0 - 10.0 9.0 - 14.0 20 99153155
SLC.575.D.3.J-PT 3 575 12.5 - 15.0 13.0 - 18.0 25 99153156

DLC, float-switch-controlled option

Main disconnect
Voltage Motor shaft power Overload range
Description Phase switch required Product number
[VAC] [hp] [A]
[A]
DLC.208/230.B.1-FC 1 208/230 2.0 10.0 - 40.0 25 99165672
DLC.208/230.A.3.A-FC 3 208/230 1.5 - 1.8 2.0 - 6.3 20 99107783
DLC.208/230.B.3.B-FC 3 208/230 2.0 - 3.0 5.7 - 18.9 20 99107784
DLC.208/230.B.3.C-FC 3 208/230 2.0 - 7.5 9.0 - 30.0 50 99107785
DLC.208/230.C.3.D-FC 3 208/230 8.0 - 10.0 15.0 - 45.0 75 99107786
DLC.208/230.D.3.D-FC 3 208/230 12.5 - 15.0 15.0 - 45.0 120 99107787
DLC.460.E.3.A-FC 3 460 1.5 - 4.0 2.0 - 6.3 20 99107788
DLC.460.F.3.B-FC 3 460 5.5 - 10.0 5.7 - 18.9 40 99107789
DLC.460.D.3.C-FC 3 460 12.5 - 15.0 9.0 - 30.0 50 99107790
DLC.575.G.3.E-FC 3 575 1.5 1.6 - 2.5 15 99153145
DLC.575.H.3.F-FC 3 575 1.8 - 3.0 2.5 - 4.0 15 99153146
DLC.575.I.3.G-FC 3 575 4.0 - 5.5 4.0 - 6.3 20 99153147
DLC.575.J.3.H-FC 3 575 7.5 6.0 - 10.0 25 99153148
DLC.575.C.3.I-FC 3 575 8.0 - 10.0 9.0 - 14.0 30 99153149
DLC.575.D.3.J-FC 3 575 12.5 - 15.0 13.0 - 18.0 40 99153150

104
SL1, SLV pumps
13
DLC, transducer-controlled option

Accessories
Main disconnect
Voltage Motor shaft power Overload range
Description Phase switch required Product number
[VAC] [hp] [A]
[A]
DLC.208/230.B.1-PT 1 208/230 2.0 10.0 - 40.0 25 99165674
DLC.208/230.A.3.A-PT 3 208/230 1.5 - 1.8 2.0 - 6.3 20 99107067
DLC.208/230.B.3.B-PT 3 208/230 2.0 - 3.0 5.7 - 18.9 20 99107068
DLC.208/230.B.3.C-PT 3 208/230 2.0 - 7.5 9.0 - 30.0 50 99107069
DLC.208/230.C.3.D-PT 3 208/230 8.0 - 10.0 15.0 - 45.0 75 99107070
DLC.208/230.D.3.D-PT 3 208/230 12.5 - 15.0 15.0 - 45.0 120 99107071
DLC.460.E.3.A-PT 3 460 1.5 - 4.0 2.0 - 6.3 20 99107072
DLC.460.F.3.B-PT 3 460 5.5 - 10.0 5.7 - 18.9 40 99107073
DLC.460.D.3.C-PT 3 460 12.5 - 15.0 9.0 - 30.0 50 99107074
DLC.575.G.3.E-PT 3 575 1.5 1.6 - 2.5 15 99153157
DLC.575.H.3.F-PT 3 575 1.8 - 3.0 2.5 - 4.0 15 99153158
DLC.575.I.3.G-PT 3 575 4.0 - 5.5 4.0 - 6.3 20 99153159
DLC.575.J.3.H-PT 3 575 7.5 6.0 - 10.0 25 99153160
DLC.575.C.3.I-PT 3 575 8.0 - 10.0 9.0 - 14.0 30 99153161
DLC.575.D.3.J-PT 3 575 12.5 - 15.0 13.0 - 18.0 40 99153162

Additional options
SLC and DLC Product number
Battery backup with charger (for alarm only)**
Intrinsically safe relay for float inputs with UL698A Listing (FC only)**
Intrinsically safe barrier/relay for pressure transducer and backup floats, UL698A (PT only)**
Padlockable main disconnect switch Consult factory
Phase monitor with fusing
304 stainless steel panel
Enclosure adder

** Enclosure adder is required

Note: Seal-failure sensor(s), overtemperature sensor(s) are standard. Condition messages, such as run time, alarms and pump cycles are displayed on the
HMI operating panel.

Submersible, analog level pressure transducer

Picture Description Product number
TM06 6891 2516

Grundfos submersible, analog level pressure transducer kit (sensor and birdcage) with 65 ft PUR cable
99045076
0-9 psi (0 - 0.62 bar) / 0 - 20.1 ft (6.1 m) measuring range, stainless steel birdcage

Level switches
Picture Description Product number
Grundfos level switch MS1 UL with 33 ft cable 98365984
Grundfos level switch MS1 UL with 40 ft cable 98365985
Grundfos level switch MS1 UL with 60 ft cable 98365986
TM05 6793 5112

Cable support of stainless steel 98365987

Grundfos level switch MS1 Ex IEC ex with 33 ft cable 98372085
Grundfos level switch MS1 Ex IEC ex with 40 ft cable 98372086
Grundfos level switch MS1 Ex IEC ex with 60 ft cable 98372087
Cable support of stainless steel 98365987

105
 SL1, SLV pumps
13
Features
Accessories

SLC
SLC enables:
• control of one pump based on signals from level
switches
• control of one pump based on signals from a
submersible analog level pressure transducer with

TM05 6794 5112

float-switch alarms
• battery backup in case of mains supply failure
(accessory)
• selection of automatic restarting
• selection of automatic/manual/off setting Fig. 26 DLC controller
• alarm indication of:
Level switches
– high water level
The Grundfos level switches are of the non-mercury
– overload (via motor protection relay).
type and are available for standard and explosion-
As standard, SLC has an audio/visual high water level proof pumps. The hermetically sealed polypropylene
alarm with auto reset. housing and polyurethane cable make the level switch
• audio alarm, 95 dB warble tone at 24" resistant to, for example, many chemicals, alcohol, uric
• visual alarm 7/8" diameter red lens, push to silence acid, sewage, oils, gasoline and fruit acid.
• NEMA 4X, 1 W bulb. Location and position of level switches
The level switches are to be installed in the pit floating
on the pumped liquid.
The position of the level switches decides when SLC
or DLC will start and stop the pump:
• When the level switch is pointing upwards, the level
switch contact will be closed and the pump will start.
• When the level switch is pointing downwards, the
TM05 6795 5112

level switch contact will be opened and the pump

will stop.

Fig. 25 SLC controller

TM00 6678 3497

DLC ON
DLC enables:
• control of two pumps based on signals from level OFF
switches
• control of two pumps based on signals from a Fig. 27 Level switch positions
submersible analog level pressure transducer with
float-switch alarms Submersible, analog level pressure transducer
• automatic pump changeover (even distribution of The sensor enables constant water level detection.
operating hours on both pumps) The sensor is installed in the wet well, inside a
protective tube. The lower end of the tube must be
• battery backup in case of mains supply failure
approx. 20 cm above the bottom of the well. The
(accessory)
sensor contains Kevlar rope within the PUR cable
• selection of automatic restarting jacket to support the weight of the transducer/birdcage
• selection of automatic/manual/off setting combination.
• alarm indication of:
Birdcage
– high water level
The birdcage sensor guard protects the sensor from
– overload (via motor protection relay). floating debris. Its weight provides the sensor with
As standard, DLC has an audio/visual high water level stability, even in light turbulence.
alarm with auto reset:
• audio alarm, 95 dB warble tone at 24"
• visual alarm 7/8" diameter red lens, push to silence
• NEMA 4X, 1 W bulb.

106
SL1, SLV pumps
13
Dedicated Controls CU 362 control panel

Accessories
CU 362 2
3
1 5
4
6
7
8
9
10

TM05 3044 2012

11

13 12
Fig. 29 CU 362 control panel

Gr-1014749
Pos. Description
1 Display
2 Right
3 Help
Fig. 28 Dedicated Controls control unit
4 Up
Grundfos Dedicated Controls is a control system that 5 Down
can control and monitor one to six Grundfos 6 Plus
wastewater pumps and a mixer or a flushing valve. 7 Minus
Dedicated Controls are used in installations requiring 8 Back
advanced control and data communication. 9 Home
10 OK (accept)
The main components of the Dedicated Controls
11 Indicator light, operation (green)
system are:
12 Indicator light, fault (red)
• CU 362 control unit 13 Contrast
• IO 351B module (general I/O module).
Dedicated Controls are available as separate
components.
The control system can be operated by:
• float switches
• a level sensor
• a level sensor and safety float switches.
The separate control unit and modules can be built for
practically any size of system.

107
 SL1, SLV pumps
13
Status menu Alarm menu
Accessories

Fig. 30 Status menu Fig. 32 Alarm menu

Description Description
• Graphical illustration of system (upper half of • Current alarm and alarm log with detailed
display). information:
• Clear text parameters. – What the cause of the fault is.
• Indication of alarms that occur during operation (top – Where the fault occurred (system, pump no. 1
and middle of display). etc.).
• Reading of system and individual pump – When the fault occurred (time and date).
performance (lower half of display). – When the fault disappeared (time and date).
• Button for further information. • Alarm snapshot - reading of system and pump
• Active buttons are illuminated. parameters at the time of alarm.
Operation menu • Alarm log with up to 24 historical warnings and
alarms.
• Button for further information.
• Active buttons are illuminated.

Fig. 31 Operation menu

Description
• Setting of basic parameters, for instance start/stop
levels.
• Setting of auto/on/off of system or individual pumps.
• Resetting of alarm relays.
• Button for further information.
• Active buttons are illuminated.

108
SL1, SLV pumps
13
Settings menu • CUE/VFD (optional), which is either a Grundfos

Accessories
variable-frequency converter or a general variable-
frequency converter, also offers better pump
protection and a more steady flow through the pit
pipes, so the pumps are treated well and the energy
consumption is kept at a minimum.
For further information, see the data booklet or
installation and operating instructions for Dedicated
Controls on www.grundfos.us (Grundfos Product
Center).
Dedicated
Name
Controls

Application
One pump ●
Two pumps (up to six pumps) ●
Fig. 33 Settings menu Mixer ●
Battery backup ●
Description
Level sensor
• Various settings: Float switch ●
– Setting of analog/digital inputs and outputs. Electrodes
– Setting of application-optimized functions such as Air bell
energy optimization, foam drainage and advanced Pressure sensor ●
Ultrasonic sensor ●
alternation.
Analog level sensor with safety
– Display language. ●
float switches
– Communication settings. Starting method
– Ethernet etc. Direct-on-line starting (DOL) ●
Star-delta starting ●
• Button for further information.
Soft starter ●
• Active buttons are illuminated.
Basic functions
Dedicated Controls can be fitted with various units: Start and stop of pump(s) ●
• The CU 362 control unit, which is the "brain" of the Pump alternation ●
Dedicated Controls system, is fitted in the cabinet High-level alarm ●
front. CU 362 can be fitted with one of the Grundfos Dry-running-level alarm ●
CIM communication modules mentioned below, Flow measurement
●
(calculated or via flow sensor)
depending on the monitoring needs or the SCADA
Pump statistics ●
system: Conflicting-levels alarm ●
– CIM 200 is a Grundfos communication module Advanced functions
used for the Modbus RTU fieldbus protocol. Start and stop delays
●
– CIM 250 is a communication module used for (prevent water hammering)
GSM/GPRS communication. CIM 250 establishes Motor temperature sensor ●
communication between CU 362 and a SCADA Test run/anti-seizing ●
Daily emptying
system, thereby allowing the application to be (emptying the pit once a day)
●
monitored and controlled remotely. This module Water-in-oil sensor input ●
also offers SMS messaging, for example status Communication
and alarm messages.
SMS messaging ● 1)
– CIM 270 is a communication module for the
SCADA communication (GSM/
Grundfos Remote Management system (GRM). ● 2)
GPRS)
CIM 270 establishes communication between CU User interface
362 and GRM, thereby allowing the application to
Level indication ●
be monitored and controlled remotely. Graphical display ●
• The IO 351B module, which is a general I/O module PC Tool WW Controls ●
communicating with CU 362 via GENIbus. 1) If an SMS module is fitted.
• The MP 204 motor protector (optional), which 2)
If a CIM 250 GSM/GPRS module is fitted in CU 362.
provides many electrical status values, for example
voltage, current, power, insulation resistance and
energy. MP 204 offers better protection of the
pumps than a conventional motor protection device.

109
 SL1, SLV pumps
14
14. Grundfos Product Center
Grundfos Product Center

Online search and sizing tool to help you

make the right choice.

http://product-selection.grundfos.com

SIZING enables you to REPLACEMENT enables you to find a

size a pump based on replacement product.
entered data and Search results will include information on
selection choices.
• the lowest purchase price
• the lowest energy consumption
• the lowest total life cycle cost.

CATALOG gives you LIQUIDS enables you to find pumps

access to the Grundfos designed for aggressive, flammable
product catalog. or other special liquids.

All the information you need in one place Downloads

Performance curves, technical specifications, pictures, dimensional drawings, motor On the product pages, you can download
curves, wiring diagrams, spare parts, service kits, 3D drawings, documents, system parts. Installation and Operating Instructions, Data
The Product Center displays any recent and saved items — including complete projects — Booklets, Service Instructions, etc. in PDF format.
right on the main page.

110
SL1, SLV pumps
14
Grundfos GO

Grundfos Product Center

Mobile solution for professionals on the GO!
Grundfos GO is the mobile tool box for professional users on the go. It is the most comprehensive platform for mobile
pump control and pump selection including sizing, replacement and documentation. It offers intuitive, handheld
assistance and access to Grundfos online tools, and it saves valuable time for reporting and data collection.

GET IT ON

Subject to alterations.

111
 © Copyright Grundfos Holding A/S
The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide.
98822245 1118
ECM: 1247616

Grundfos Water Utility, Inc.

3905 Enterprise Court
IL 60504 Aurora
Phone :(+1) 630 236 5500
Telefax: (+1) 630 236 5511

GRUNDFOS Canada Inc.

2941 Brighton Road
Oakville, Ontario L6H 6C9
Canada
Phone: +1-905 829 9533
Telefax: +1-905 829 9512

Bombas GRUNDFOS de Mexico S.A. de C.V.

Boulevard TLC No. 15
Parque Industrial Stiva Aeropuerto
Apodaca, N.L. Mexico 66600
Phone: +52-81-8144 4000
Telefax: +52-81-8144 4010

GRUNDFOS Kansas City

17100 West 118th. Terrace
Olathe. KS 66061
Phone: +1-913 227 3400
Fax: 1-913-227-3500