180MA C O M M E R C I A L A U D I O S E R I E S

280MA
1160MA

he Crown® 180MA, 280MA and 1160MA are

T high-value mixer-amplifiers for commercial

and industrial audio. They provide 4-ohm
and constant-voltage outputs (70V and 100V).
Features
• 4 or 8 inputs, 1 or 2 amplifier output channels • Priority muting
Some applications include schools, hospitals, • Ideal for commercial and industrial use • Independent bass and treble controls for
factories, restaurant/retail, houses of worship, each input
fitness facilities, A/V boardrooms, prisons, and • Balanced Phoenix-type mic/line inputs;
small offices. Typical uses are paging, background touch-proof screw-terminal speaker outputs • Three-Year, No-Fault, Fully Transferable
music, security and evacuation instructions. • Any input can be sent to any output Warranty completely protects your invest-
ment and guarantees its specifications
The mixer-amps vary in their number of inputs,
number of outputs, and power range:
• 180MA has 4 inputs and one 80W power ampli-
fier for single-zone systems.
• 280MA has 8 inputs and dual 80W power ampli-
fiers for two-zone systems. Input Impedance (nominal):
*1 kHz Mic: 400 ohms.
• 1160MA has 4 inputs and one 160W power
amplifier for single-zone systems.
180MA Power Line: 100 kilohms.
Minimum guaranteed power RCA: 50 kilohms.
Input routing allows each input to be assigned to
into 4 ohms or 70V/100V output 80W Crosstalk: –70dB at 1kHz.
any output. This drastically reduces the need for
additional mixers or amplifiers (or both) when Line Output Level (nominal): 1V into 10 kilohms.
systems require either more inputs or outputs. Phantom Power: 15 VDC.
*1 kHz Power: refers to maximum power in watts at
However, each mixer-amplifier can be upgraded as 1 kHz with 0.5% THD. AC Line Voltages Available:
a facility expands. For example, you can add more 100V 50/60 Hz
mixers for more inputs, or add more power amps 120V 60 Hz
to handle more zones. 220V 50/60 Hz
Other features include priority muting, phantom 230V 50/60 Hz
power, and capability for remote volume control. 240V 50/60 Hz

*1 kHz Operating Temperature/Humidy: 0° C to 40° C at

Specifications 280MA Power 95% relative humidity (non-condensing).
Storage Temperature: –20° C to 85° C.
Performance Minimum guaranteed power
per channel into 4 ohms or
Frequency Reponse (at 1 watt from 4-ohm tap): Front Panel Controls and Indicators
70V/100V output 80W
70 Hz to 19 kHz ± 1 dB.
Power Switch: Pushbutton on-off switch. The
Frequency Response (at line out): 20 Hz to 20 *1 kHz Power: refers to maximum power in watts at power switch does not affect the 24V DC auxiliary
kHz ± 1 dB. 1 kHz with 0.5% THD.
power input.
Power Bandwidth (at 4-ohm tap, 2 dB below Input Volume Controls: Microphone/line, four in
maxium 1 kHz power): 50 Hz to 20 kHz with 180MA and 1160MA, eight in 280MA. Detented
< 0.5% THD potentiometers with knobs.
Signal to Noise Ratio (ref. to rated power, Tone Controls: Bass and Treble non-detented
master volume at minimum): 85 dB. recessed potentiometers on each input channel.
*1 kHz Bass ±10 dB at 100 Hz, Treble ±10 dB at 10 kHz.
DC Output Offset: < ±5 mV.
1160MA Power
Power Indicator: Blue LED indicates power on.
THD: Less than 0.5% at rated power at 1 kHz.
Minimum guaranteed power Input Signal Presence Indicator: Green LED, one
Input Sensitivity (for full output at maximum
gain):
into 4 ohms or 70V/100V output 160W for each input channel, illuminates when input
signal exceeds –24 dBu (line) or –70 dBu (mic).
Balanced mic inputs: 3 mV.
Balanced line inputs: 800 mV. *1 kHz Power: refers to maximum power in watts at
Output Signal Presence Indicator: Green LED,
RCA connectors: 400 mV. 1 kHz with 0.5% THD. one for each output channel, illuminates when
output signal level exceeds 100 mV (45 dB below
full power) from the 4-ohm tap. Does not respond
to signals from the AMP INPUT connector.
 180MA
280MA
NO FUNCTION

1160MA

280MA back panel shown

Clip Indicators: Red LED, one per output chan- The tone generator has been omitted. Call Crown Tech Dimensions
nel. Illuminates at threshold of audible distortion. Support if you have a tone generator question. EIA Standard 19-inch (48.3-cm) rack mount width
Does not respond to signals from the AMP INPUT Input Connectors: (EIA RS-310-B) with rack ears, 3.5-inch (8.9-cm)
connector. Mic/Line Connector: 3-pin Phoenix-type, bal- height and 12.2-inch (31.0-cm) depth behind the
anced, one per input channel. mounting surface (not including non-touch cover).
Output Volume Controls: One per output channel.
4.1 inches (10.5 cm) high including feet. 13.9
Detented potentiometer with knob. Dual RCA Input Connector: For stereo music inches (35.2 cm) deep from front of knobs to back
signals, unbalanced, summed together, two con- of non-touch cover.
Back Panel Controls and Connectors nectors per input channel.

Reset Switch: Resets the circuit breaker that Amp Input Connector: 3-pin Phoenix-type, high- Weight
protects the power supply. 220/230/240V units impedance balanced, one per amplifer channel. Net Weight:
have a fuse instead. Used to link an additional mixer to the mixer- 180MA: 21.0 lbs. (9.5 kg).
amplifier. Can be used to connect an external 280MA: 25.3 lbs. (11.5 kg)
AC Power Inlet: Detachable IEC. processor. 1160MA: 25.3 lbs. (11.5 kg)
Auxiliary Power Input: 2-position terminal strip Mic/line Switch: Selects mic-level or line-level
for 24 VDC (±10%) backup power. Accepts up to Shipping Weight:
signals. One switch for each balanced input. 180MA: 26.0 lbs. (11.8 kg)
14 AWG terminal forks.
Link In/Out Switch: Slide switch, one per channel. 280MA: 30.3 lbs. (13.8 kg)
Amplifier Outputs Connectors: One per channel, With the Link Switch IN, any signal applied to the 1160MA: 30.3 lbs. (13.8 kg)
4-position terminal strip with COM (Common), 4 Amp Input connector will be mixed with the input
ohms, 70V and 100V terminals. Accepts up to 14 signal(s). With the Link Switch OUT, only the
AWG terminal forks. Non-touch cover included. signal from the Amp Input Connector will appear
Output VCA Connector: 4-pin Phoenix-type at the amplifier output.
connector for two VCA control lines of +10 VDC
and ground. Compatible with Crown 1-VCAP and Cooling
4-VCAP modules. Convection cooled.
Amp Config Switch: A DIP switch with two func-
tions: Protection
Current Limit Protection: Included.
1. Assigns an input as the priority input for each
output, thereby temporarily muting the remaining Thermal Limit Protection: Over-temperature
inputs. Muting is activated by contact closure. thermal cutout.
2. Global enable switch for phantom power. Does DC-Fault Load Protection: Included.
not affect RCA inputs. Default position is off.
Priority Connector: 3-pin Phoenix-type connector
Included Accessories
Power cord
allows Input 1 or Input 5 (280MA only) to mute
Detachable rack ears
other input signals by contact closure.
Screws for rack ears
Input Routing Switch (280MA only): DIP switches Non-touch cover for output connectors
that assign each input signal to each output. Two Phoenix-type connectors
switches per input. Spade lugs
Line Out Connector: One 3-pin balanced Phoenix-
type connector per output channel. Post master, Optional Accessories
pre-VCA. Level controlled by master volume 1-VCAP remote volume control for one channel.
control. 4-VCAP remote volume control for four channels.

Crown International
Crown’s Three-Year, No-Fault, Fully Transferable Warranty 1718 W. Mishawaka Rd.
Elkhart, IN 46517-9439
Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown mixer-amplifier—
TEL: 574-294-8200
an unsurpassed industry standard. With this unprecedented No-Fault protection, your new Crown mixer- FAX: 574-294-8FAX
amplifier is warranted to meet or exceed original specifications for the first three years of ownership. www.crownaudio.com
During this time, if your mixer-amplifier fails, or does not perform to original specifications, it will be
repaired or replaced at our expense. About the only things not covered by this warranty are those losses
normally covered by insurance and those caused by intentional abuse. And the coverage is transferable, Specifications subject to change without prior notice. Latest
information available at www.crownaudio.com.
should you sell your mixer-amplifier.
Crown and Crown Audio are registered trademarks of Crown
See your authorized Crown dealer for full warranty disclosure and details. For customers outside of the International. Other trademarks are the property of their
USA, please contact your authorized Crown distributor for warranty information or call 574-294-8200. respective owners. Printed in U.S.A.
© 2007 Crown Audio®, Inc.

12/07 137964-2B