Scribd
Upload
36 views1 page

Pip GK

This document provides specifications for the PIP-GK series of battery inverters/chargers from MPP Solar. The series includes 3KW and 5KW continuous output models that can operate without batteries using batteryless support. The inverters feature MPPT solar charging, pure sine wave output, LCD control display, monitoring via Bluetooth, and programmable parameters. They are suitable for off-grid and grid-tied solar systems.

Uploaded by

Shared Mail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
36 views1 page

Pip GK

This document provides specifications for the PIP-GK series of battery inverters/chargers from MPP Solar. The series includes 3KW and 5KW continuous output models that can operate without batteries using batteryless support. The inverters feature MPPT solar charging, pure sine wave output, LCD control display, monitoring via Bluetooth, and programmable parameters. They are suitable for off-grid and grid-tied solar systems.

Uploaded by

Shared Mail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

REMOVABLE DISPLAY MOBILE MONITORING

VIA BLUETOOTH

BMS COMMUNICATION BATTERYLESS SUPPORT


PORT (BATTERY)

PIP-GK SERIES 3024GK 5048GK


ELECTRICAL SPECIFICATION
Continuous Output 3KW 5KW
Surge Rating 6KVA 10KVA
Input Power Factor 1
MAIN FEATURES Input Voltage Range 90~280VAC (Appliance), 170~280VAC (UPS)
Input/Output Frequency 50Hz / 60Hz
● NEW! Batteryless Operation Support
Output Voltage 230VAC±5%
● NEW! Improved Monitoring Features Output Waveform Pure Sine Wave
(Removable USB / RS232, RS485, Bluetooth) Output Short Circuit Circuit Breaker
Peak Efficiency 93%
● NEW! Removable LCD Control Display (20m)
Nominal DC Voltage 24V 48V
● NEW! Reserved BMS port (battery) Max DC Input 33V 63V

● 3KW / 5KW continuous output model Transfer Time <10ms (UPS mode), <20ms (Appliance mode)
Charging Mode 3-stage
● Special high-voltage MPPT built-in solar charger
Max AC Charging Current 60A
● High frequency pure sine wave design Equalization Charge 31.5V 61V

● Max 500VDC open circuit input SOLAR CHARGER SPECIFIATIONS


Charging Algorithm MPPT
● Max 80A solar charging (up to 4KW PV) Max Charging Current (PV power) 8OA (~4KW PV)
● Max charging voltage 31.5V @ 24V, or 61V @ 48V Max PV Input Voc 500VDC
MPPT Range 120 - 450VDC
● Suitable for Off-Grid or with Grid backup
ENVIRONMENTAL / MECHANICAL SPECIFICATIONS
● Generator starter dry contact port Certification CE
● Programmable parameters on LCD Communication Interface Removable USB, RS232/RS485, Bluetooth, Dry Contact
Operating/Storage Temp. 0°C ~ 50°C / -15°C~ 60°C
● Max up to 60A utility charging
Operating Humidity 20~90%RH Non-Condensing
● Lightweight, easy to install Dimension 400*300*115mm
● 2X surge capacity Net Weight 11KG 13KG

● FREE monitoring software MPP Solar Inc. reserves the right to change product specification without notice. MPP Solar is a registered trademark.

● LCD Display + LED indicators

[email protected] │ www.mppsolar.com

You might also like