Scribd
Upload
70 views2 pages

Spec Sheet SUS304

This document provides information on the chemical composition, specifications, and test results for stainless steel grade SUS304-H. The chemical composition lists the percentage limits for carbon, silicon, manganese, phosphorus, sulfur, nickel, and chromium in the steel. The specifications section outlines the thickness tolerances, hardness values, tensile strengths, elongations, and surface roughness measurements for steel samples of varying thicknesses, with the results meeting the specifications.

Uploaded by

gopeenas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views2 pages

Spec Sheet SUS304

This document provides information on the chemical composition, specifications, and test results for stainless steel grade SUS304-H. The chemical composition lists the percentage limits for carbon, silicon, manganese, phosphorus, sulfur, nickel, and chromium in the steel. The specifications section outlines the thickness tolerances, hardness values, tensile strengths, elongations, and surface roughness measurements for steel samples of varying thicknesses, with the results meeting the specifications.

Uploaded by

gopeenas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

STAINLESS STEEL (SUS304)

Chemical Composition (%)


C Si Mn P S Ni Cr
≦0.080 ≦1.00 ≦2.00 ≦0.045 ≦0.030 8.00~10.50 18.00~20.00

Specification
＊ The results of each item are reference values.
＊ "-" in each item means that it cannot be meaured or has not been measured.
Thickness Tolerance Hardness Tensile Strength Elongation Surface Roughness(Rz)
SUS304-H
mm HV N/mm² (MPa) % μm
mm Specification Result Specification Result Specification Result Specification Result Specification Result

0.002 ±0.0005 0.00205 - - - - - - - -


0.003 ±0.0005 0.00288 - - - - - - - -
0.005 ±0.0005 0.0054 - - - - - - - -
0.006 -0/0.001 0.0069 - - - - - - - -
0.007 ±0.0010 0.0073 - - - - - - - -
0.008 ±0.0010 0.0084 - - - - - - - -
0.009 ±0.0010 0.0087 - - - - - - - -
0.010 ±0.0010 0.0107 - - - - - - - -
0.015 ±0.0015 0.0155 - 398 - - - - - -
0.020 ±0.0020 0.0203 ≧370 398 - 1217 - 2.9 ≦1.00 0.70
0.025 ±0.0020 0.0254 ≧370 424 - 1316 - 2.3 ≦1.00 0.46
0.030 ±0.0020 0.0305 ≧370 394 - 1174 - 4.1 ≦1.00 0.55
0.035 ±0.003 0.036 ≧370 423 - - - - - -
0.040 ±0.003 0.041 ≧370 429 - 1280 - 4.2 - -
0.045 ±0.004 0.046 ≧370 406 - 1277 - 6.9 - -

1/2
0.050 ±0.004 0.051 ≧370 397 - 1168 - 13.1 - -
0.055 ±0.004 0.056 ≧370 395 - 1249 - 3.1 - -
0.060 ±0.005 0.062 ≧370 408 - 1220 - 8.0 - -
0.065 ±0.004 0.066 ≧370 408 - 1200 - 9.2 - -
0.070 ±0.005 0.071 ≧370 398 - 1247 - 7.9 - -
0.075 ±0.005 0.076 ≧370 392 - 1211 - 4.1 ≦1.00 0.48
0.080 ±0.005 0.082 ≧370 403 - 1276 - 2.7 - -
0.085 ±0.006 0.086 ≧370 389 - - - - - -
0.090 ±0.007 0.091 ≧370 375 - 1203 - 6.7 ≦1.00 0.54
0.095 ±0.007 0.096 ≧370 379 - 1205 - 7.3 ≦1.00 0.47
0.100 ±0.010 0.103 ≧370 380 - 1129 - 21.0 - -

2/2

You might also like