GEP-2651 Version: 1
26-Port Web Smart Gigabit PoE Switch, 24 PoE
Outputs, 2 x SFP/RJ45 Combo, 185W
GEP-2651 Web Smart Gigabit PoE Switch is a next-generation Ethernet Switch offering powerful L2
features, Layer 3 Static Route, better PoE functionality and usability that delivers the cost-effectively
business and transports Ethernet services via fiber or copper connections. GEP-2651 delivers 24
(10M/100M/1G) RJ45/PoE+ (Support 802.3at/af, and total up to 185W) ports and 2 Combo GbE RJ45/SFP
ports. GEP-2651 provides high HW performance and environment flexibility for SMBs and Enterprises.
GEP-2651 is ideal to deliver management simplicity, optimum user experience, and lower total cost of
ownership. The embedded Device Managed System is designed to be extremely easy-to-
use/manage/install IP Phone, IP Cam, or Wifi-AP for Enterprise Applications.
Key Features
- 24 PoE-Plus Gigabit Ethernet ports and 2 Gigabit SFP slots
- QoS control for traffic prioritization and bandwidth management
- DHCP Client/Server
- Supports IPv4/IPv6 network operation
- Minimize carbon footprint with advanced energy efficient technology (IEEE 802.3az)
- IEEE 802.1d/w/s Spanning Tree Protocol (STP) and port mirroring
- IP Multicast Filtering through IGMP Snooping V1 / V2 / V3
- Supports port-based VLAN, IEEE 802.1Q VLAN Tagging
- IEEE 802.3ad LACP for auto port aggregation
Specifications
System Specifications
Standards & Protocols:
IEEE 802.3u 100-BASE-TX, Fast Ethernet
IEEE 802.3ab 1000BASE-T, Gigabit Ethernet
IEEE 802.3z 1000BASE-X,Gigabit Ethernet
IEEE 802.1p Quality of Service (QoS)
IEEE 802.1X Port-based Network Access Control (PNAC)
IEEE 802.1Q Virtual LANs (VLANs)
IEEE 802.1D MAC Bridges
IEEE 802.1d Standard Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree (MSTP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet Plus (PoE+)
IEEE 802.3az Energy-Efficient Ethernet
Link Layer Discovery Protocol (LLDP)
www.level1.com Page 1 of 5
Memory:
RAM : 128 MB
Flash : 32 MB
Buffer Memory:
512 KB
Connectors and Cabling:
24 (10M/100M/1G) RJ45/PoE+ (Support 802.3at/af, and total up to 185W) ports and 2 Combo GbE
RJ45/SFP ports
Button/Knob:
Mode / Reset Button
Indicator:
System, Link/Act/Speed, PoE
Transmission Method:
Store-and-Forward
Power Input:
100-240 VAC 50~60 Hz, internal, universal
Power Output:
12V
Power Consumption:
18.29 W
Features
General:
policer egress shaping and rate control
Spanning Tree:
Bridge Protocol Data Units (BPDU)
IEEE 802.1D MAC Bridges
IEEE 802.1d Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
Virtual Local Area Network (VLAN):
802.1Q tag-based VLAN - up to 256 VLANs and 4096 VLAN IDs
Port-based VLAN
MAC-based VLAN
DHCP: DHCP Client
IPv6:
IPv6 host mode; IPv6 stateless address auto-configuration; Duplicate Address Detection (DAD)
ICMP v6;
IGMP:
IGMP v1/v2/v3 snooping; IGMP Queried; IGMP Proxy
IPv6 QoS Prioritize IPv6 packets in hardware
Port Mirroring:
Many-to-One TX/RX
Port Trunking:
IEEE 802.3ad LACP Trunk -Static Trunk up to 25 trunk groups
PoE:
Power Budget: Max. 185W
Power Output: Up to 30W per port
Protection: Circuit protection to prevent power interference between ports
Management: PoE status, PoE on/off scheduling, PoE power delay, PoE Auto checking, Per port power
priority setting
Pin Assignment: 1/2(+), 3/6(-)
www.level1.com Page 2 of 5
Security:
ACLs?L2/L3/L4
ACLs?IPv6 Support
Port Security (MAC-based)
IP Source Guard
Storm Control
RADIUS Authentication 802.1x
HTTPs and SSL (Secured Web)
BPDU Guard
STP Root Guard
DHCP Snooping
Loop Protection
Management:
Switch Management:
DHCP?Client?Option 66?Option 67
Event/Error Log?Syslog?SMTP (RFC821)
Management Access Filtering?SNMP?Web
PoE Management?Scheduling?Auto-Checking?Power DelaySNMP (v1, v2c, v3)
RMON ( 1,2,3 & 9 Groups)
Software Upgrade
Configuration Export/Import
Port Mirroring
LLDP (IEEE802.1AB)
LLDP-MED (IEEE802.1AB)
CDP Aware
IPv6 Management
NTP
L3:
Static Route
DHCP Server
Ease of Use:
Firmware and Configuration: Upgrade via HTTP
Performance
Backplane (Gbps):
Switching Bandwidth: 52Gbps
Forwarding Performance : 38.7Mpps
MAC Address Table:
8K
Data Transfer Rate:
10/100/1000Mbps
Packet Forwarding Rate:
38.68 Mpps
Jumbo Frame (K):
9600
Environment
Power Saving:
IEEE 802.3az Energy Efficient Ethernet:
- Automatically turns power off on RJ-45 port when detecting link down or Idle of client
- Cable length detection: Adjusts the signal strength based on the cable length
- Reduces the power consumption for cables shorter
www.level1.com Page 3 of 5
Temperature (°C):
Operating: 0°C ~ 450°C
Storage: -20°C ~ 70°C
Humidity (Non-condensing):
Storage: 10% ~ 90%
Operating: 10 ~ 90%
Deployment:
19-inch rack-mountable
Physical Specifications
Dimensions (W x D x H mm):
442 x 211x 44 mm
Weight (g):
3100g
Reliability
MTBF:
25’C?211,272(hr)
40’C?103,032(hr)
Approval and Compliance
EMI/EMS:
CE, FCC Part 15 Class A
Safety:
UL 60950-1, 2nd Edition, 2014-10-14 (Information Technology Equipment - Safety - Part 1: General
Requirements)
CAN/CSA C22.2 No. 60950-1-07, 2nd Edition, 2014-10 (Information Technology Equipment - Safety - Part
1: General Requirements)
Others:
DMS
www.level1.com Page 4 of 5
Diagram
Order Information
GEP-2651
Package Contents
GEP-2651
Resource CD (User Manual, QIG)
Power Cord
Quick Installation Guide
No liability or responsibility for any errors or omissions in the content.
Specifications are subject to change without notice.
All mentioned brand names are registered trademarks and property of their owners.
Copyright © Digital Data Communications GmbH, Germany. All Rights Reserved.
www.level1.com Page 5 of 5
Powered by TCPDF (www.tcpdf.org)
