Scribd
Upload
4K views49 pages

Aramco Level Iii Notes

Rigger level3

Uploaded by

Aalam Mudasir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
4K views49 pages

Aramco Level Iii Notes

Rigger level3

Uploaded by

Aalam Mudasir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 49
HL RIGGER LEVEL Il GUIDE Industrial Training Saudi Aramco Standards ABDUL KHALID KHAN efpertise Crane Instructor P.O.Boox no 10353 mob 966+ 583494795 Jubail 31961 K.S.A E-Mail:[email protected] eee ABDUL KHALID KHAN RIGGER II! Multi Choices Overview Test Prepared By:khalid khan 0583494795 Multiple Choices : For each of the following questions select the correct letter and circle. 1:- What type of life line must be used when working near energized electrical equipment? Wire rope Non-conductive fiber rope Metal chain Leather poep 2:-What do the letter SWL lifting and rigging equipment mean? A. Strong working limit B. Safe working limit (load) C. Swing the load D. Stamped with limit 3:-A hard hat (safety hat) should havea space between the webbing and the shell of at least? 2" inch 4/2" inch 3” inch 2" inch po@> 4:- What is the mst important item of safety equipment used by a rigger? A. Safety hat B. Sport shoes Coveralls D. Grane 5:- When lifting any object, the correct method is to use? Only the arms ‘One hand The back The leg muscles on a> Page 2 of a8 ABDUL KHALID KHAN chalid khan 0583494795, - What is the maximum weight that can be lifted using a tow man pole lift? A. 350 Kilo grams B. 90 Kilo grams C75 Kilo grams D. 60 Kilo grams 7:- Before any lifting operation is carried out, the rigger must? Inform the superintendent Clean the load to be lifted Erect a large sign Barricade the area pomp 8: Whenever possible, any rigging operation should follow the rule of keeping load? Low and slow Fast and high Above head height Slow and high poe 9:- At what height must a safety belt be worn when there is no working platform? A. Any height B. Above 8 ft C. Above 20 ft D. Below 20ft » Taglines must be used on lifts? High All Long Heavy oAg@> Page 3 of 48 ABDUL KHALID KHAN RIGGER III Multiple Choices Overview Test Pre| id By:khalid khan 0583494795 11:- When a load is being lifted, the rigger must? A. Stand directly beneath the load B. Sit under the crane drivers cabin C. Stand clear of the load D. Sit on top of the load 12:- When lifting any object, the back must be? Allowed to bend Used to lift the object Kept at an angle Kept as straight as possible poe When lowering any object to the floor youshould? Let the object drop Bend the knees and use your leg muscles Ask a second person to help Bend from the waist po@> 14:- Refer to graphic. What is the name of the equipment show? ‘A. Wire rope clip B. Plate clamp C. Lifting beam D. Beam clamp 15:8 lifting beam? fts tow loads at the same time Directs heavy objects over large obstacles Distributes the weight of a load evenly Guides a heavy load So a> Page 4 of 48 RIGGER III Multiple Choices Overview Test Prepared By: 16:- What equipment prevents a load from being crushed? A. Chaffing gear 8. Beam clamp C. Spreader beam D. Turnbuckle 17+ Refer to graphic. What is the name of the connecting equipment shown? Sling Plate clamp. Shackle Hoist pose 18:- A plate clamp? A. Spreads the weight of the load 8, Stackssteal plates C. ‘Protectsisteel plates from damage D,_ Lifts steel plates without the need of holes If the jaws of a plate clamp are coated with direct or grease you must? ‘Aw.Use the clamp only on small plate B. Not use the clamp C. Replace the jaws D. Clean and inspect them before use Page 5 of 48 RIGGER III Multiple Choices Overview Test Prepared By:khalidkhan 0582494795 20:- Refer to graphic. What is the name of the connecting equipment shown? A. Spreader beam B. Plate clamp C. Beam clamp D. Eye bolt 24:-If a beam clamp is found to have cracks onits body, you must? A. Itonly on small loads B. Still use it C. Red use its capacity D. Not use it 22:- Refer to picture: what is the name of the connecting equipment shown? A. Sling B. Shackle C. Eye bolt D. Hoist. <> 23:- Refer to graphic. What is the name of the connecting equipment shown? Turnbuckle Spreader beam Shoulder type eye bolt Eye sling SOR > . Page 6 of a8 Prepared By:khalia khan 0589494705 24:- An eyebolt? ‘A. Makes and eye in the wire rope B. Attaches slings and shackles to loads C. Protects the eye of a sling D. Spreads the weight to the load 25:- If ai n eye bolt develops a crack, you must? Destroy it Weld the crack Use it carefully Reduce its capacity poe 26:- Refer to picture: What is the name of the equipment show below? Turnbuckle Eye bolt Wire rope clip Bow shackle gone, Refer to picture: What is the name of the equipment show below? ‘A, Shackle 8. Turnbuckle © D-shackle D. Eye bolt Page 7 of 48 RIGGER Ill Multiple Choices Overview Test Prepared By: 0583494795 28:-A shackle is use to? A. Make an eye in the load B. Support a load C. Join two separate load D. Connect a sling toa load 29: If the threads on the pin of a shackle are damaged you must? Rethread the pin ‘Weld the pin into position Only use it for ight loads Destroy the shackle pomE Ashackle has no SWL stamp, you must? AL Not use it B. Use it on small loads only C. Still use it D. Reduce its capacity 31:- Refer to graphic. What is the name of the sling shown? A. Endless belt B. Endless C. Sing leg belt D. Endless chain rope 32;- Refer to graphic. Whatis the name of the sling shown? A. Endless leg belt By Endless wire rope € Endless belt D. Endless chain -o~"" Page 8 of 48 RIGGER III Multiple Choices Overview Test Prepared By:knalia khan 0583494795 33:- What type of sling should you use when there could be contact with acid? Nylon fiber Polyester fiber Natural fiber Wire rope pneP 34:- Refer to graphic. What is the name of the sling shown? Single leg belt Single leg chain Single endless Single leg -wire-rope Cc-—«s 35:- What type of sling should you use when there could be contact with electrical equipment? poe Synthetic fiber Endless wire rope Single wire rope Chain brothers poe> 36:- Refer to graphic, What kind of damage to the sling is shown? Broken wires Flattening Kinking Corrosion: Sop> Page 9 of 48 RIGGER III Multiple Choices Overview Test Prepared lalid khan 0583494795 37: Refer to graphic. What kind of damage to the sling is shown? ‘A. Broken wires 8. Corrosion on ©. Kinking D. Flattening 38:- What type of 8 provides the most flexibility and grip? ‘A. Wire rope slings B. Chain slings C. Synthetic fiber slings D. Wire mesh slings 39:- Refer to graphic. What is the name of the sling slings shown? Rope Chain Endless Belt one> a 40:- Slings? A. Can be Used as.attag line BL Attach a load to a lifting device C. Attach’a joad to a load 0. Attach one lifting device to another 41 Synthetic slings are used when a load? Would be damaged by other types of slings. Has sharp edges Is less than 2 tons More than 5 tons eos Page 10 of 48 RIGGER Ill Multiple Choices Overview Test Prepared By:khalid khan 0583494795 42:- What is the most suitable sling to lift a load that can be easily scratched or damaged. Assynthetic belt sling Achain sling Awire rope sling. A metal birded sling poeP 43:- When checking a belt type (synthetic) sling for wear and damage, it is important to look for? Kinks Cuts Broken wires Bird caging on e@> 44:- When checking a belt type (synthetic) sling for wear and damage, it is important to look for? kinks Broken stitches Broken wires popP> Corrosion 45:- Wire rope'slings are commonly used because they? poss Do not require maintenance Do'not damage loads ‘Are very flexible ‘Come in many size and are hard-wearing Popp ‘What is a major type of damage to wire rope slings? Broken stitches Broken links kinking Stretched links Page 11 of 48 RIGGER III Multiple Choices Overview Test Prepared By:knalid khan 0583494795 47:- When checking belt type (synthetic) sling for wear and damage, it is important to look for? Corrosion Bird caging ‘The SWL Kinking poe :- When checking wire slings for wear and damage, one of the main things to look for is? Corrosion It the sling is greased ‘The manufacturer's name How the sling is painted poe@> 49:- Refer to graphic (picture). What is the name of the equipment shown? A. Chain hoist B. Cone-along . Hand-operated winch D. Turnbuckle 50:- When inspecting a chain hoist for wear and damage, one of the main things ‘to look for is? That it is painted ‘The manufactures name That is looks clean A damaged load hook coe Page 12 of a8 RIGGER Ill Multiple Choices Overview Test Prepared By:khalid khan 0583494795 51:- When inspecting a chain fall hoist for wear and damage, one of the main things to look for is? That the handle is straight The hydraulic fluid level Acrack in the hoist body That the chain is greased poeP 52:- When inspecting a chain fall hoist for wear and damage, one of the main things to look for is? ‘A. Hook safety latch works correctly B. Hydraulic fluid level is correct . Threads are not damaged D. Hand chain is greased 53:- Chain hoists? ‘A. Protect loads from sharp edges B. Lift tow loads at the same time C. Lift loads vertically D. Pull loads horizontally 54:- Chain hoists? ‘A. Protect loads from sharp edges B. Make eyes in wire rope slings C. Balance loads D..-Pull loads horizontally ‘55:- Refer to graphic. What is the name of the equipment shown below? Chain hoist Come-along Turnbuckle Hand operated winch oomp Page 13 of a8 RIGGER III Multiple Choices Overview Test Prepared By:khalid khan 0583494795 56:- Hand operated winches? Adjusting sling lengths Pull and lift loads over long distances Balance loads Protect slings from sharp edges goe> 57:- When inspecting a hand-operated winch for were and damage, one of the main things to look for is are? A. The manufacturer's on it 8. Broken wires in the wire rope C. How clean the winch look D. How the winch is painted 58:- Refer to graphic. What is the name of the connetting equipment shown below? Shackle Plate clamp Spreader beam Wire rope clip poe> 59:- If wire rope clip is found to have excessive corrosion you must? Not use it Still use it Reduce the capacity Use it with a larger diameter rope 29 @> 60:- A wire rope clip? Makes an eye in a wire rope Spreads the weight of the load Supports the load Protects the eye of a sling pop Page 14 of a8 RIGGER III Multiple Choices Overview Test spared By:khalid khan 0583494795 What is the name of the equipment shown below? 61:- Refer to graphi A. Chain hoist B. Vertical pull C. Come-along D. Vertical lift When inspecting a come-along hoist for wear and damage, you must? A. Check that the hook is wéllciled 8. Make sure that the chain cannot move, C. Check that the chain has not shrunk D. Check for excessive were in the chain Acome-along? A.sSwing heavy loads 8. Pulls horizontally . Pusha loads D. Lifts leads over 5 tons 64:- A come-along? A. Make vertical lifts and horizontal pulls B. Make eyes for wire ropes C. Protect slings from sharp edges D. Lift tow loads at the same time Page 15 of 48 RIGGER Il! Multiple Choices Overview Test Prepared ‘Khalid khan 0583494795, 65:- When inspection a Come-along, for wear and damage, one of the main things to look fo! A 8 c . 66:-Refer to picture: That the threads are not damaged That it is painted The safety latch works ‘The hydraulic fluid level /hat is the name of the connecting equipment shown. below? one Jaw to eye combination turnbuckle Jaw to jaw combination turnbuckle Hook to eye combination turnbuckle Hook to hook combination turnbuckle 67:- Turnbuckles A. By c D Lift heavy loads Adjustithe tension on a sling Protect slings from sharp edges Lift tow loads at the same time 68:- Turnbuckles ooeE ‘Adjust the lengths of sling Suspend heavy loads Reduce tuition on the loads Protect slings form damage Page 16 of 48, Choices Overview Test Prepared By:khalid khan 0683494795 69:- Refer to picture: What is the name of the equipment shown? Jaw and eye combination turnbuckle Eye and eye combination turnbuckle Hook and eye combination turnbuckle Hook and hook combination turnbuckle one> ~ ws 70:- How do you determine the SWL ofa turnbuckle? Ws size It can adjust any load Diameter of the threaded rods The body poep 71:- When inspecting a turnbuckle for wear and damage, one of the main things to look for is that? A. Ithas been painted B._Both the end fitting are the same © The body is not cracked D. Itis greased 72:- When inspecting a turnbuckle for wear and damage, one of the main things ‘to look for is that? ‘A. ‘The manufacturer's name is on it B. Ithooks clean C. tis painted D. The threads are not damaged Page 17 of a8, RIGGER Ill Multiple Choices Overview Test Prepared By:khalid khan 0583494795 73:- When inspecting a turnbuckle for wear and damage, one of the main things to look for that they? End fitting are not distorted End fittings are painted Eyes are not the same Threads are greased pop 74:- When inspecting a turnbuckle for wear and damage, one of the main things to look for that they? Size is indicted Body has been painted Eyes are not the same Hook are not spread poe 75:- Refer to graphic. What is the name of the.crane shown? Hydraulic-boom crane Counterweight crane Truck-mounted mot Crawler crane crane goe> Page 18 of 48 RIGGER Ill Multiple Choices Overview Test Prepared By:knalid khan 0583494795 76:- Refer to graphic. What type of crane show? ooe> gop> Lattice-boom crane Overhead crane Crawler crane Hydraulic-boom crane Refer to graphic. What is the name of the crane show? Gantry Tower Crawler Mobile Page 19 of 48 RIGGER II! Multiple Choices Overview Test Prepared By:khalid khan 0583494795 78:- Refer to graphic. What is the name of the cranes how? Lattice Hydraulic crane Crawler crane Mobile crane goe> 79:-Refer to graphic. What is the name of the component indicated by the arrow? A. Boom. 8. Main hoist C. Whip line D. Jib 80:- Refer to graphic. What is the name of the component indicated by the arrow? Control tine Counter weight ‘Main boom Outrigger oles Page 20 of 48 RIGGER III Multiple Choices Overview Test Prepared By:knalic khan 0583494795, 81:- Refer to graphic. What is the name of the component indicated by the arrow? A. Main hoist B. Outriggers ©. Whip line D. Counter weight 82:- Refer to graphic. What type of crane show? A. Lattice-boom crane 8. Overhead crane (monorail étane) C. Crawler crane D. Hydraulic-boom crane 83:-Refer to graphic, What is the name of the component shown below? A. Boom B, Outrigger C. Main hoist D. “Counter weight Page 21 of 48 RIGGER Il! Multiple Choices Overview Test Prepared By:knalid khan 05834947095 84:- Refer to graphic. What is the name of the equipment shown below? A. Boom 8. Jib C. Whip line D. Main hoist 85:- Refer to graphic. What is the name of the component indicated by the arrow? A. Boom B. Main hoist Whip line D. Jib ‘86:- The biggest single cause of fatalities associated with cranes is? ‘A. Hooks falling B. Booms braking C._ Jumping from the driver’s cab D. Contact with electrical power lines Page 22 of 48 RIGGER II! Multiple Choices Overview Test Prepared By:khalid knan 0583494795 87:- Refer to graphic. What is the name of the crane show? A. Gantry 8. Tower . Crawler D. Mobile 88:- What does rated capacity mean? Minimum weight the equipmentecan lift Maximum weight the equipment can safely lift ‘The weight that the equipment will break The weight of the equipment poe 89:- Refer to graphic. What is the name of the connecting equipment shown? sling Eyebolt Wire rope clip, Hook poep Page 23 of 48 RIGGER II! Mult Choices Overview st Prepared By:khalid khan 0583494795 90:- If a hook does not have a safety latch attached, it? Use with a reduced capacity Should be reversed Can be used safely as it is Should not used soe 91:- A hook is a? A. Spreader of load weight B. Connector on hoists, cranes and slings . Protector of sling eyes D. Lifting point on loads Refer to graphic. What is the name of the hoisting equipment shown? Dolly Shackle Turnbuckle Wire rope block goeP 93:- Refer to graphic. What is the name of the hoisting equipment shown? A. Come-along 8. Chain fall ©, Block anditackle D. Handiwinch Page 24 of 48 RIGGER III Multiple Choices Overview Test Prepared By: khalid khan 0583494795 94:- Refer to picture: What is the name of the rigging equipment show? Car jack Hydraulic jack Step jack Screw jack poe> 95:-Refer to picture: What is the name of the rigging equipment show? A. Screw jack B. Easy jack . Step jack D. Hydraulic jack 96:- What is the mai jum load a step jack can lift? 15 tons 12 tons 24 tons Any weight soe ‘97:- Screw jack are most often use for? A. Lifting against metal B, Because they are not heavy . They make small adjustments D, They have a cylinder ‘98: What part of a hydraulic jack determines the “height” it can lift? ‘The handle ‘The SWL The ram ‘The base of the jack ooe> Page 25 of 48 RIGGER Il! Multiple Choices Overview Test Prepared By:knalid khan 0583494795, 99:- What position you must use hydraulic jacks? Horizontal On aangle Upside down Vertical poepPE 100:- Refer to graphic. What is the meaning of the hand signal shown? Retract the boom Lower slowly Stop lifting Extend the boom pne> 101:- Refer.to graphic: What is the meaning of the hand signal shown? As Lower the hoist B. “Lower the boom, ©, Use the main hoist, D. Raise the hoist slowly ek Hi Page 26 of 48 RIGGER III Multiple Choices Overview Test Prepared By:khalid khan 0583494795 102:- Refer to graphic. What is the meaning of the hand signal shown? A ‘Swing the boom Stop C. Lower the load D. Lower the boom, 103:- Refer to graphic. What is the meaning of the hand signal shown? goeP Use the main hoist Lower the hoist Lower the load Raise the boom 104;- Refer to picture: What is the meaning of the hand signal shown? oP => Lower the boom. Swing the boom Lower the hoist Raise the load Page 27 of 48 RIGGER III Multiple Choices Overview Test Prepared By:knalid khan 0583494795 105:- Refer to picture: What is the meaning of the hand signal shown? Raise the boom slowly Raise the boom Raise the boom and lower the hoist Lower the boom and raise the hoist ooep 106:- Refer to picture: What is the meaning of the hand signal shown? Raise the boom and lower the hoist Lower the boom and extend the hoist Lower the boom and raise the hoist Lower the boom goe> 107:- Refer to picture: Whatis the meaning of the hand signal shown? Ag Lowenthe boom B. Extend the boom C., Swing the boom D. Extendithe boom Page 28 of 48 RIGGER III Multiple Choices Overview Test Prepared By:khalid khan 0583494795 108:- Refer to picture: What is the meaning of the hand signal shown? pn e> Emergency stop ‘Swing the hoist, Lower the boom Lower the jacks 109:- Refer to graphic. What is the meaning of the hand signal shown? poep> Use the outriggers Raise the hoist Lower the load slowly Use the whip line 110:- Refer to graphic. What Is the meaning of the hand signal shown? ve s> Raise the boom Lower the hoist Use the main hoist Raise the hoist Page 29 of 48 RIGGER Il! Multiple Choices Overview Test _— eee _ Prepared By:khalid khan 0583494795 \g of the hand signal shown? 111:- Refer to graphic. What is the mea ‘Swing the boom slowly Lower the hoist slowly Lower the boom slowly Extend the boom poe> 112:- Refer to graphic. What is the meaning of the hand signal shown? Lower the boom Retract the boom Lower the load Extend the boom, poe 113:-Refer to graphic. What is the meaning of the hand signal shown? Lower the load Raiseithe boom Lower the hoist Lower the boom Soe Page 30 of 48 RIGGER Il! Multiple Choices Overview Test Prepared By: khalid khan 0583494795 114:- Crane signals must be given by? The crane operator's assistant Any person working with the crane One man Two men poe> :- What signal can any rigger working on the job give at any ‘A. Dog everything B. Emergency stop C. Raise the boom D. Lunch break - Refer to graphic. What is the name of the hitch show? One leg choker Tow leg bridle ‘Two leg choker Two leg basket poe> 117:- Refer to graphic. What is the name of the hitch show? Double choker Single basket Single vertical Single choker on s> Q os 6 Page 31 of a8 Multiple Choices Overview Test Prepared By: khalid khan 0583494795 118:- Refer to graphic. What is the name of the hitch show? Tow leg bridle hitch Double wrap choker hitch Two leg choker hitch Double wrap basket hitch poe 119:- Refer to graphic. What is the name of the hitch show? fh f= Page 32 of a8 Single vertical basket hitch Single choker hitch Single vertical choker hitch Double basket hitch poe 120:- Referto graphic. What is the name of the hitch show? ‘A. Double wrap hitch 8. Double choker hitch © Single choker hitch D. Double basket hitch RIGGER II! Mul Prepared By:khalid khan 0583494795 Refer to graphic. What kind of hitch is show? Tow leg choker Tow leg bridle Double basket Single basket poe> 122:- Refer to graphic. What is the name of the hitch show?. A. Double choker hitch B. Double wrap basket hitch C. Single choker hitch D. Double basket hitch 123:- Refer to graphic: What is the name of the hitch show? Fourleg vertical Four leg bridle Four leg choker Double leg basket 29 b> Page 33 of 48 RIGGER III Multiple Choices Overview Prepared By:knalid khan 0583494795 124:- Refer to graphic. What is the name of the hitch show? Single vertical hitch Single basket hitch Single hitch Single wrap basket hitch one> 125:- Refer to graphic. What is the name of the hitch show? Tow leg bridle Double basket Three leg bridle Three leg choker ooe> Page 34 of 48 RIGGER II! Multiple Choices Overview Test Prepared Bi khan 0583494705 126:- Refer to graphic and the tables. What diameter of sling is required for the load shown? A. 3/4 87/8 a1 D. 11/8 a 19300 Ibs DIA WIRE ROPE SLING 6X 19, IPS,FC jee LOAD 127:- Refer to graphic and the tables. What is the capacity of the hitch arrangement shown? \. 13,400 Ib 16,500 Ib, 19,000 Ib ..21,2001b poeP ow jes 1-1/8 DIA WIRE ROPE SLING 6X 19, IPSEC Page 35 of 48 RIGGER II! Multiple Choices Overview Test Prepared By:knalld khan 0582494795, 128:-Refer to graphic and the tables, What diameter of sling is required for the load shown? A 8 c D. 6X 19, IPS,FC DIA WIRE ROPE SLING RIGID LOAD 129:- Refer to graphic and the tables. What diameter of sling is required for the load shown? AK 8, 7/8” c 5/8” Dae 6X 19, IPS,FC DIA WIRE ROPE SLING | WEIGHT OF Eee Page 36 of 48 RIGGER Ill Multiple Choices Overview Test Prepared By:khalid khan 0583494705 130:- Refer to graphic and the tables .What is the capacity of the hitch arrangement shown? A. 12.800 Ibs B. 11.800 Ibs €. 13.000 Ibs D. 12.000 Ibs 7/8" DIA WIRE ROPE SLING 6X 19, IPS,FC - Refer to graphic and the tables. What diameter of sling is required for the load shown? 3/4" 78" ” 1.1/4" com> 6X 19, IPS.FC DIA WIRE ROPE SLING Page 37 of a8 RIGGER II! Multiple Choices Overview Test Prepared By: khalid khan 0583494795, 132:-Refer to graphic and the tables. What is the capacity of the hitch arrangement shown? A. 7,012.5 Ibs B. 124666 Ibs €. 7.1255 tbs 1. 9850 Ibs 5/8” DIA WIRE ROPE SLING 6X 19, IPS,FC 133:- Refer to graphic and the tables, What diameter of sling is required for the load shown? A 11/4" 8. 7/8" c. 3/4 D. 1.3/8" 6X 19, IPS,FC DIA WIRE ROPE SLING | Page 38 of 48, RIGGER Ill Multiple Choices Overvi Prepared By:khalid khan 0583494795 134:- Refer to graphic and the tables. What diameter of sling is required for the load shown? A 12" 8. 3/4" c. 7/8" b. 5/8” "6X 19, IPS,FC DIA WIRE ROPE SLING 135:- Refer to graphic and the tables. What.is the capacity of the hitch arrangement shown? 9,600 1b 12,800 Ib 16,700 Ib 25,600 Ib poe 30 7/8" DIA WIRE ROPE SLING 6X 19, IPS,FC Page 39 of 48, Multiple Choices Overview Test Prepared By:khalid khan 0583494795 136:- Refer to graphic and the tables. What is the capacity of the hitch arrangement shown? A 8, G D. 9,500 Ib 1. 10,050 Ib 12,375 Ib 13,400 Ib 3/4" DIA WIRE ROPE SLING 6X 19, IPSEC 137:- Refer to graphic and the tables. What diameter of sling is required for the load shown? pom> ye 5/8” 3/4” 7/8" DIAWIRE ROPE SLING WEIGHT OF LOAD 5,2 50 LB Page 40 of 48 RIGGER III Multiple Choices Overview Test Prepared By: knalid khan 0583494795 138:- Refer to graphic and the tables. What diameter of sling is required for the load shown? 5/16" 7/8" syi6" 3/4" poe> 60 40,800 Ibs 6X 19, IPS,FC DIA WIRE ROPE SLING FLEXIBLE LOAD 139:- Refer to graphic and the tables. What diameter of sling is required for the load shown? 7/8" 5/8” o/i6" y one@> | 6X 19, IPS,FC | DIA WIRE ROPE SLING Page 41 of 48 RIGGER Ill Mul le Choices Overview Test Prepared By:khalid khan 0583494705 140:- Refer to graphic and the tables. What is the capacity of the hitch arrangement shown? 9,600 Ib 12,800 Ib 18,100 Ib 45.400 Ib one> 1-1/4" DIA WIRE ROPE SLING | 6X 19, IPS,FC 141:- Refer to graphic and the tables. What is the Capacity of the hitch arrangement shown? A. 8.200 Ib B. 9.200 Ib C. 12,466 Ib D. 11,400 Ib, Page 42 of a8 RIGGER II! Multiple Choices Overview Test Prepared By:khalid khan 0583494795 142:- Refer to graphic and the tables. What diameter of sling is required for the load shown? A. 1/2" B. 5/8" © 3/4" D. 7/8" 6TON 6X19, 1PSFC DIA WIRE ROPE SLING [see LOAD 143:- Refer to graphic and the tables, What diameter of sling is required for the load shown? A. 1.5/8" B. 1-1/2" c 14a" pape 6X 19, IPS.FC DIA WIRE ROPE SLING =| Page 43 of 48 RIGGER III Multiple Choices Overview Test Prepared By:khalid khan 0583494795. 144:-Refer to graphic and the tables. What is the capacity of the hitch arrangement shown? A. 7,500 Ib B. 45.400Ib ©. 46.400 Ib . 13,400 Ib /1-1/4°DIA WIRE ROPE SLING 6X 19, IPSEC 145:- Refer to graphic and the tables. Whats the capacity of the hitch arrangement shown? 18,100 Ib 60.500 Ib 20.800 Ib 57,800 Ib poe> fev WIRE ROPE SLING | 6X 19, IPS,FC Page 44 of 48 RIGGER III Multiple Choices Overview Test Prepared By:khalid knan 0583494795 146:- Refer to graphic and the tables. What diameter of sling is required for the load shown? 7/6" a2" 5/8" 3/8" oop ©) 6X 19, IPSEC DIA WIRE ROPE SLING WEIGHT OF LOAD 575018 147:-Refer to graphic and the tables. What diameter of sling is required for the load shown? 3/2" 5/8" 3/4" 7/8" pose 6X19, IPS,FC DIA WIRE ROPE SLING Page 45 of 48 Overview Test Prepared 148:-Refer to graphic and the tables. What diameter of sling is required for the load shown? A. 7/8" 8. 14/4" c. 13/8" D. 1-1/2" 6X19, IPS, DIA WIRE ROPE SLING (eeeee LOAD =a 149:- Refer to graphic and the tables. What is the capacity of the hitch arrangement shown? 13,400 Ib 28,900 Ib 19,000 Ib 22,210 Ib Soe > T" DIA WIRE ROPE SLING 6X 19, IPS,FC Page 46 of 48, RIGGER III Multiple Choices Overview Test Prepared By:khalid khan 0683494795 150:-Refer to graphic and the tables. What diameter of sling is required for the load shown? 1-3/8" 718" 3/4” + poe, 6X19, SFC DIA WIRE ROPE SLING eo ee J FLEXIBLE LOAD 151:-Refer to graphic and the tables. What diameter of sling is required for the load shown? 14" 1-18" 7/8" Fa BOPP 6X19, 1PS,FC DIA WIRE ROPE SLING [wes OF LOAD 10, TON, Page 47 of a8 RIGGER II! Multiple Choices Overview Test 3 ; s Slo Ch ao f | €|3 i 2 z Bl a|a|a)

You might also like