Scribd
Upload
138 views5 pages

Tees Straight, Butt Weld, ASME B16.9

This document provides specifications for butt weld pipe fittings including: 1) Dimensions for nominal pipe sizes from 1/2 to 48 inches. 2) Dimensional tolerances according to ASME B16.9 for straight tees from 1/2 to 48 inches. 3) Notes that MSS SP-43 covers stainless steel butt weld fittings dimensions that are substantially the same as ASME B16.9 from 1/2 to 24 inches except for the outside diameter at the bevel.

Uploaded by

HoJienHau
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
138 views5 pages

Tees Straight, Butt Weld, ASME B16.9

This document provides specifications for butt weld pipe fittings including: 1) Dimensions for nominal pipe sizes from 1/2 to 48 inches. 2) Dimensional tolerances according to ASME B16.9 for straight tees from 1/2 to 48 inches. 3) Notes that MSS SP-43 covers stainless steel butt weld fittings dimensions that are substantially the same as ASME B16.9 from 1/2 to 24 inches except for the outside diameter at the bevel.

Uploaded by

HoJienHau
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Flow meters are equip with interfaces : 4 - OPEN

20mA, Modbus RTU or even Ethernet

Dimensions Butt Weld


safety documents materials
ASME B16.9
societies pipes flanges fittings

valves bolts gaskets

equipment specials steel

steam civil others

O.D. Center to End Center to End


NPS

1/2 21.3 25 25

3/4 26.7 29 29

1 33.4 38 38

1.1/4 42.2 48 48

1.1/2 48.3 57 57
MENU FITTINGS
2 60.3 64 64

2.1/2 73 76 76

3 88.9 86 86

3.1/2 101.6 95 95

4 114.3 105 105

5 141.3 124 124

6 168.3 143 143

8 219.1 178 178

10 273 216 216

12 323.8 254 254

14 355.6 279 279

16 406.4 305 305

18 457 343 343

20 508 381 381

22 559 419 419

24 610 432 432

26 660 495 495

28 711 521 521

30 762 559 559

32 813 597 597

34 864 635 635


Question and Answer
36 914 673 673

38 965 711 711 Piping related Abbreviations


40 1016 749 749

42 1067 762 711 Making the environment better

MENU FITTINGS
44 1118 813 762

46 1168 851 800

48 1219 889 838

Dimensions are in millimeters unless otherwise


indicated.
Wall thickness ( ) must be specified by customer.
Outlet dimension ( ) for NPS 26 and larger is
recommended but not required.

Dimensional Tolerances Straight Tees ASME B16.9

1/2 3 5 10 20 26 32
Nominal Pipe Size to to 4 to to to to to
2.1/2 3.1/2 8 18 24 30 48

Outside Dia +1.6 +2.4 +4 +6.4 +6.4 +6.4


1.6 1.6
at Bevel ( ) -0.8 -1.6 -3.2 -4.8 -4.8 -4.8

+6.4 +6.4
Inside Dia at End 0.8 1.6 1.6 1.6 3.2 4.8
-4.8 -4.8

Center to End ( ) 2 2 2 2 2 2 3 5
MENU FITTINGS
Wall Thk ( ) Not less than 87.5% of Nominal Wall Thickness

Dimensional tolerances are in millimeters unless


otherwise indicated and are equal ± except as noted.

Note..
MSS SP-43 only covers stainless steel buttweld fittings
made for use with Schedule 5S and 10S pipe and Stub
Ends suitable for use with Schedule 40S pipe, as
defined in ASME B36.19. The dimensions and
dimensional tolerances defined in MSS SP-43 are
substantially the same as those in ASME B16.9
specifications from NPS 1/2 - NPS 24. Except with
regard to the outside diameter at the bevel.

MENU FITTINGS
Explore the World of Piping

© Werner Sölken 2008 - 2023


All rights reserved.
www.wermac.org uses Google Analytics

I must be old. I still believe in respect.

MENU FITTINGS

You might also like