Scribd
Upload
915 views2 pages

Retrofit Ultrasonic Backup Assist - AZ54.65-P-0001CW

This document provides installation instructions for retrofitting ultrasonic backup assist sensors to Mercedes Benz MODEL 204.0 vehicles without existing backup assistance. It outlines 10 steps for the installation including removing parts, installing new sensors and wiring, and performing functional tests. The installation is only for specific MODEL 204.0 variants without existing backup camera or sensors.

Uploaded by

Piotr Wojciechowski
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
915 views2 pages

Retrofit Ultrasonic Backup Assist - AZ54.65-P-0001CW

This document provides installation instructions for retrofitting ultrasonic backup assist sensors to Mercedes Benz MODEL 204.0 vehicles without existing backup assistance. It outlines 10 steps for the installation including removing parts, installing new sensors and wiring, and performing functional tests. The installation is only for specific MODEL 204.0 variants without existing backup camera or sensors.

Uploaded by

Piotr Wojciechowski
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AZ54.65-P-0001CW Retrofit ultrasonic backup assist 26.2.

15

MODEL 204.0 (except 204.077)


without CODE 220 (PARKTRONIC)
without CODE 498 (Japanese version)
without CODE 772 (AMG styling package - front spoiler, side skirts and rear apron)
without CODE 950 (AMG Sports package)

1 Quickpark control unit


2 Warning tone speaker
3 Sensor with contour ring

Remove
1 Disconnect battery ground line
AR54.10-P-0003CW
2 Detach rear SAM control unit with fuse and
relay module and place to one side with
electrical lines still connected
AR54.21-P-1258CW
3 Remove rear bumper
AR88.20-P-2200CW
Install
4 Paint sensors with contour rings (3) AZ54.65-P-0001-01P
Only on customer request.
5 Install sensors with contour rings (3) MODEL 204.0 (except 204.077) AZ54.65-P-0001-03CWA
as of model year 2012
without CODE 220 (PARKTRONIC)
without CODE 498 (Japanese version)
without CODE 772 (AMG styling package -
front spoiler, side skirts and rear apron)
without CODE 950 (AMG Sports package)

MODEL 204.0 (except 204.077) AZ54.65-P-0001-03CW


up to model year 2011
without CODE 220 (PARKTRONIC)
without CODE 498 (Japanese version)
without CODE 772 (AMG styling package -
front spoiler, side skirts and rear apron)
without CODE 950 (AMG Sports package)
6 Route Quickpark wiring harness AZ54.65-P-0001-06CW
Right taillamp trunk ground point *BA00.19-P-1004-01F
3M Acrylic Plus adhesive tape PT1100, double *BR00.45-Z-1159-02A
sided, black, 12 mm wide
Wiring harness repair kit, basic *000589139900
7 Install rear bumper and connect Quickpark
wiring harness to sensors with contour rings
(3)

Page 1 of 2
AR88.20-P-2200CW

The rubber seals on the electrical connections


for the sensors must be watertight when fitted.
Malfunctions can occur otherwise.
8 Install remaining parts
Update Vehicle Documentation (VeDoc)
9 Attach "Ultrasonic backup assist retrofitted as
per AZ54.65-P-0001CW" note under field
organization texts to design group 54
Check
10 Perform function test See Quickpark Operator's Manual.

Ground points

Number Designation MODEL 204


BA00.19-P-1004-01F Right taillamp trunk ground point W7/1 Nm 10

000 589 13 99 00
Wiring harness repair kit, basic

Repair materials

Number Designation Order number


BR00.45-Z-1159-02A 3M Acrylic Plus adhesive tape PT1100, double sided, black, 12 3MDeutschland GmbH
mm wide Carl-Schurz-Strasse 1
41453 Neuss
Germany
Tel. +49 2131 14-0
Fax +49 2131 14-2649
www.3M.com
Order no. E80320

Parts ordering note

Part no. Designation Quantity


KG 98 (siehe EPC) Quickpark installation kit 1

Page 2 of 2

You might also like