PL® Marine
Fast Cure Adhesive Sealant
Description: Loctite PL Marine Fast Cure Adhesive Sealant is a fast setting, moisture cure polyether
adhesive sealant which delivers strong bonds while forming a watertight, flexible seal above or below the
waterline once cured. Free of solvents, phthalates and isocyanates, it will not shrink when cured, discolor
from UV exposure, or bubble on damp surfaces. Once cured, it withstands both saltwater and freshwater
environments.
Available As:
Item # Size Package Color
2020627 3 oz (88 ml) Carded Tube White
2016891 10.1 fl oz (295 ml) Plastic Cartridge White
Features & Benefits: Ideal for Through-Hull Fastening & Deck Fittings
Fast Setting, 24 Hours Cure
Watertight, Flexible Bond
Use Above or Below Waterline Once Cured
Recommended For: Loctite PL Marine is recommended for applications such as through-hull fastening, deck fittings, deck to hull joints, portlights,
moldings, struts and planking, and stem joints. It adheres to teak and other woods, fiberglass, vinyl, glass, FRP, metal, gelcoat,
polycarbonate, and most plastics (test all plastic substrates for bond strength and compatibility before use).
For Best Results: Not suitable for engine compartment use
Horizontal applications will require tooling
Remove all coatings and sealers before application
Allow treated wood to “cure” for 6 months prior to application per APA guidelines
Test and evaluate all paints before application
Do not store in elevated temperatures
Coverage: For a 3 fl. oz. (88 ml) cartridge:
A 1/4” (6 mm) bead extrudes approximately 9.2 ft. (2.8 m)
A 3/8” (9.5 mm) bead extrudes approximately 4.1 ft. (1.2 m)
For a 10.1 fl. oz. (295 ml) cartridge:
A 1/4” (6 mm) bead extrudes approximately 30.9 ft. (9.4 m)
A 3/8” (9.5 mm) bead extrudes approximately 13.8 ft. (4.2 m)
Loctite® PL® Marine
Fast Cure Adhesive Sealant
Page 1 of 3
Typical Uncured Color: White
Physical Properties: Appearance: Thick paste
Base: Polyether
Odor: Slightly, minty
Specific Gravity: 1.41
Viscosity: 1,200,000 ± 400,000 cp Brookfield, 4 rpm @ 72°F (22°C)
VOC Content: 1.2% by weight CARB
15 g/l SCAQMD rule 1168
Shelf Life: 12 months from date of manufacture Stored at 70°F (21°C) /50% RH
(unopened)*
*High temperature & high relative humidity may significantly reduce shelf life
Lot Code Explanation: #YYDDD
# = Letter corresponding to batch number of the day (ie. A=Batch 1)
YY = Last two digits of year of manufacture
DDD = Day of manufacture based on 365 days in a year
Example: A15061 = Batch 1 made on 61st day of 2015 = March 2, 2015
Typical Application Application Temperature: Apply between 32°F (0°C) and 100°F (38°C)
Properties: For best results, apply between 60°F (16°C) and 100°F (38°C)
Tack-Free Time: 20 to 30 minutes* *At 72°F and 50% relative humidity
Handling Time: 30 to 60 minutes*
Cure Time: 24 hours*
*Time is dependent on temperature, humidity, porosity of substrate and depth of sealant applied
Typical Cured Color: White
Performance Properties: Appearance: Firm synthetic rubber
Service Temperature: -40°F to 200°F (-40°C to 93°C)
Water Resistant: Yes
Paintable: Yes. All paint should be tested and evaluated before application. Polyurethane and oil-based
paints may dry slowly.
Hardness: 38 - 42 ASTM C661
Shrinkage: No visible shrinkage after 14 days
Low Temperature Flexibility: -10°F (-23°C) Pass ¼” mandrel ASTM D816
Tensile Strength: 325 - 375 psi ASTM D412
Maximum At Break: 275 - 325% ASTM D412
Directions: Tools Typically Required:
Utility knife, caulking gun
Safety Precautions:
Wear gloves and wash hands after use.
Surface Preparation:
Ensure all surfaces are clean and free of dirt, oil, wax, loose paint, frost, oxidation and other contaminations. Rubbing alcohol
and ammonia water are effective cleaners for surface preparation. Do not use petroleum solvents. Abraded or irregular surfaces
are acceptable bonding surfaces but must be cleaned. For use with teak, wipe with alcohol prior to application to remove surface
oils. Mask off areas that must be protected.
Loctite® PL® Marine
Fast Cure Adhesive Sealant
Page 2 of 3
General Preparation:
The temperature of the product, the surfaces and the working area should be between 32°F (0°C) and 100°F (38°C). For best
performance, temperature should be between 60°F (16°C) and 100°F (38°C). Cut tip to desired bead size.
Application:
When using the cartridge, place in cartridge gun. Apply to clean surface and smooth sealant or make bond before product skins.
When bonding two impermeable materials, such as metal or plastic, brief separation and reassembly of the bonding surfaces to
expose the adhesive to atmospheric moisture will often accelerate the cure. In extremely dry environments, local humidification
may be needed to initiate curing. Low temperature will slow the cure reaction and heat will accelerate it. Product should not be
applied below 32°F (0°C). Allow the assembly to cure for 30 to 60 minutes before handling or machining. Allow 24 hours for
cure and before painting. Open containers should be quickly protected from atmospheric moisture.
Clean-up:
Clean tools and uncured sealant residue immediately using a solvent such as alcohol. Cured sealant can be removed by
abrading or scraping the substrate.
Storage & Disposal: NOT DAMAGED BY FREEZING. Store original, unopened containers in a cool, dry area. Protect unopened containers from
water, heat and direct sunlight. Elevated temperatures will reduce shelf life. Take unwanted product to an approved household
hazardous waste transfer facility. Hardened material may be disposed of with trash.
Label Precautions: WARNING! UNCURED SEALANT IRRITATES EYES AND SKIN. MAY CAUSE ALLERGIC SKIN REACTION.
WARNING! Contains amino silane. Avoid eye and skin contact. Prolonged or repeated skin contact with uncured sealant may
cause sensitization. Wear gloves and safety glasses when applying product. Remove contact lenses before using sealant. Wash
hands after using. FIRST AID: For eye contact flush with water for 15 minutes. Call a physician if irritation develops and persists.
For skin contact, wash thoroughly with soap and water. If affected by inhalation, remove to fresh air and get medical attention.
If ingested, do not induce vomiting; call a physician or Poison Control Center immediately. DO NOT TAKE INTERNALLY. KEEP
OUT OF THE REACH OF CHILDREN.
Refer to the Safety Data Sheet (SDS) for further information.
Disclaimer: The information and recommendations contained herein are based on our research and are believed to be accurate, but no
warranty, express or implied, is made or should be inferred. Purchasers should test the products to determine acceptable quality
and suitability for their own intended use. Nothing contained herein shall be construed to imply the nonexistence of any relevant
patents or to constitute a permission, inducement or recommendation to practice any invention covered by any patent, without
authority from the owner of the patent.
Trusted Performance. Proven Results.
For over 50 years, Loctite Brand adhesives and sealants have taken on the toughest jobs. Used in race cars, airplanes, and
even in the space-shuttle, Loctite provides solutions for the most demanding industrial, professional and consumer applications.
Loctite gives you not the specialization, power and performance to not only get your job done, but to get it done right.
1-800-624-7767 – Mon-Fri - 9:00a – 4:00p ET
www.loctiteproducts.com
Loctite Brand is part of the Henkel family of brands. Founded in 1876, Henkel is a global leader in the consumer and
industrial businesses. Henkel operates worldwide with leading brands and technologies in three business areas:
Laundry & Home Care, Beauty Care and Adhesive Technologies.
Henkel Corporation - Professional & Consumer Adhesives Headquarters - Rocky Hill, CT 06067
www.henkelna.com
Revision Date: 05/20/2015 Supercedes: NEW Ref. #:
Loctite® PL® Marine
Fast Cure Adhesive Sealant
Page 3 of 3
