1 2 3 4 5 6 7 8 9 10 11 12 13 14

VALVE T BORE DIMENSION WEIGHT QTY REV DATE DESCRIPTION DWN BY CHKD BY APPD BY
BOS-P4-L4-F08 Rev.01 ØD ØP ØR t No. OF HOLE / Ø L
SIZE X CLASS (FLG.THK) ØC (min) IN KGS (Nos) 00 28.01.2022 FOR ENQUIRY REFERENCE
A DESIGN SPECIFICATION : A
DN 50 X 150# 150 120.7 92.1 14.3 2 4 / Ø19 178 49 25 02
ASME B 16.34, API-600 &
DN100 X 150# 230 190.5 157.2 22.3 2 8 / Ø19 229 98 85 01 REF. STD
.MFR'S SPEC
DN 150 X 150# 280 241.3 215.9 23.9 2 8 / Ø22 394 148 340 04 TESTING STD BS EN-12266/1 & API 598 (150#)
B HYD. TEST PRESSURE SHELL 29 bar B
SEAT 21 bar
AIR. TEST PRESSURE SEAT 07 bar

C C

NOTE :-
D D
9 a) VALVE FACE TO FACE AS PER MFR'S STD
b) FLANGE END TO ASME B16.5 WITH RAISED FACE SERRATED
7 10 FINISH (125µ inch to 250µ inch) (ON BOTH ENDS)

E 8 6 E
2 5

F F

G G
ØR
ØC
ØD
ØP

H H
10 LEVER CARBON STEEL
9 PACKINGS PTFE / GRAPHITE
8 STEM WASHER CFT/GFT
7 STEM SS-316
I 1 4 3 I
6 FASTNERS ASTM - A 193 Gr.B7 / A 194 Gr.2H
t T
L ±2 5 GASKET PTFE / GRAPHITE
4 SOFT SEAT PTFE
3 BALL SS-316 / ASTM - A 351 Gr.CF8M
J 2 BONNET ASTM - A 351 Gr. CF8M J
CUSTOMER M/s. ROAL EQUIPMENT, PROCESS & SERVICE S.A DE C.V
DRAWING SHOWS ONLY SCHEMATIC REPRESENTATION OF THE VALVE 1 BODY ASTM - A 351 Gr. CF8M
ENQUIRY REF. EMAIL ENQUIRY DT.23.01.2022 Sr.No DESCRIPTION MATERIAL OF CONSTRUCTION
PRIVATE AND CONFIDENTIAL TITLE :- GA - BALL VALVE - ANSI 150#
K K
THIS DOCUMENT AND ALL THE INFORMATION CONTAINED HERE IN ARE THE CONFIDENTIAL AND EXCLUSIVE PROPERTY OF
BELL-O-SEAL VALVES PVT LTD AND MAY NOT BE REPRODUCED, USED, DISCLOSED OR MADE PUBLIC IN ANY MANNER DRG No :- BOS-S-22956 Rev.00
PRIOR TO EXPRESS WRITTEN AUTHORIZATION BY BELL-O-SEAL VALVES PVT LTD. THIS DOCUMENT IS ACCEPTED PURSUANT
TO AGREEMENT TO THE FOREGOING, AND MUST BE RETURNED UPON DEMAND. NAME DATE SCALE : N.T.S
DWN BY 28.01.2022
L C 1982 COPYRIGHTS RESERVED REPRODUCTION OR DISTRIBUTION OUTSIDE THE GROUP IS FORBIDDEN WITHOUT CHKD BY 29.01.2022 PROJECTION L
WRITTEN PERMISSION
APPD BY 29.01.2022
DESIGN SUBJECTED TO CHANGE WITHOUT PRIOR NOTICE ALL DIMENSIONS ARE IN MM

1 2 3 4 5 6 7 8 9 10 11 12 13 14
 1 2 3 4 5 6 7 8 9 10 11 12 13 14

VALVE T BORE DIMENSION WEIGHT REV DATE DESCRIPTION DWN BY CHKD BY APPD BY
BOS-P4-L4-F08 Rev.01 ØD ØP ØR (FLG.THK) t No. OF HOLE / Ø L QTY
SIZE X CLASS ØC (min) IN KGS 00 28.01.2022 FOR ENQUIRY REFERENCE
A DESIGN SPECIFICATION : A
DN 200 X 150# 345 298.5 269.9 27 2 8 / Ø22 457 198 480 02
ASME B 16.34, API-600 &
REF. STD
.MFR'S SPEC
TESTING STD BS EN-12266/1 & API 598 (150#)
B HYD. TEST PRESSURE SHELL 29 bar B
SEAT 21 bar
AIR. TEST PRESSURE SEAT 07 bar

C C

NOTE :-
D D
a) VALVE FACE TO FACE AS PER MFR'S STD
b) FLANGE END TO ASME B16.5 WITH RAISED FACE SERRATED
10 FINISH (125µ inch to 250µ inch) (ON BOTH ENDS)
9 c) FULLY ENCLOSED GEAR BOX ASSEMBLY WITH HAND WHEEL
E FOR MANUAL OPERATION E
7
8 6

F 2 5 F

G G
ØC
ØR
ØD
ØP

H H
10 GEARBOX REFER NOTE(c)
9 PACKINGS PTFE / GRAPHITE
8 STEM WASHER CFT/GFT
7 STEM SS-316
I I
6 FASTNERS ASTM - A 193 Gr.B7 / A 194 Gr.2H
5 GASKET PTFE / GRAPHITE
1 4 3 4 SOFT SEAT PTFE
t T 3 BALL SS-316 / ASTM - A 351 Gr.CF8M
J L ±2 J
2 BONNET ASTM - A 351 Gr. CF8M
CUSTOMER M/s. ROAL EQUIPMENT, PROCESS & SERVICE S.A DE C.V
DRAWING SHOWS ONLY SCHEMATIC REPRESENTATION OF THE VALVE 1 BODY ASTM - A 351 Gr. CF8M
ENQUIRY REF. EMAIL ENQUIRY DT.23.01.2022 Sr.No DESCRIPTION MATERIAL OF CONSTRUCTION
PRIVATE AND CONFIDENTIAL TITLE :- GA - BALL VALVE - ANSI 150#
K K
THIS DOCUMENT AND ALL THE INFORMATION CONTAINED HERE IN ARE THE CONFIDENTIAL AND EXCLUSIVE PROPERTY OF
BELL-O-SEAL VALVES PVT LTD AND MAY NOT BE REPRODUCED, USED, DISCLOSED OR MADE PUBLIC IN ANY MANNER DRG No :- BOS-S-22957 Rev.00
PRIOR TO EXPRESS WRITTEN AUTHORIZATION BY BELL-O-SEAL VALVES PVT LTD. THIS DOCUMENT IS ACCEPTED PURSUANT
TO AGREEMENT TO THE FOREGOING, AND MUST BE RETURNED UPON DEMAND. NAME DATE SCALE : N.T.S
DWN BY 28.01.2022
L C 1982 COPYRIGHTS RESERVED REPRODUCTION OR DISTRIBUTION OUTSIDE THE GROUP IS FORBIDDEN WITHOUT CHKD BY 29.01.2022 PROJECTION L
WRITTEN PERMISSION
APPD BY 29.01.2022
DESIGN SUBJECTED TO CHANGE WITHOUT PRIOR NOTICE ALL DIMENSIONS ARE IN MM

1 2 3 4 5 6 7 8 9 10 11 12 13 14
 1 2 3 4 5 6 7 8 9 10 11 12 13 14

VALVE BORE DIMENSION QTY REV DATE DESCRIPTION DWN BY CHKD BY APPD BY
BOS-P4-L4-F08 Rev.01 ØD d L Hc Ho Øh
SIZE X CLASS ØC (min) (Nos) 00 29.01.2022 For enquiry reference
A A
3 DESIGN SPECIFICATION :
4" NB X 800# 1.065 0.50 3.15 5.4 6.2 3.4 0.472 04
1" NB X 800# 1.330 0.50 4.00 6.4 7.3 4.6 0.669 03
REF. STD API 602 & MFR'S SPEC
Approx.Øh
B TESTING STD API 598 (800#) B
SHELL 199 bar

13 HYD. TEST PRESSURE SEAT 146 bar

C 14 VALVE APPROX WEIGHT BACK SEAT 146 bar C

SIZE X CLASS PER VALVE (Kgs)
3
AIR. TEST PRESSURE SEAT 07 bar
4" NB X 800# 1.9
12
APPROX HEIGHT - "Hc" (CLOSED)

1" NB X 800# 3.0

APPROX HEIGHT - "Ho" (OPEN)

9
D D
8

11
E 7 E

10
2

F 6 F
5
14 HAND WHEEL NUT STAINLESS STEEL
3
13 HAND WHEEL SG IRON / CS
4 ASTM-A 193 Gr.B8M CL2 /
G 12 EYE BOLT / NUT G
1 A 194 Gr.8M
11 EYE BOLT PIN ASTM - A 276 TYPE 316
10 FASTENER ASTM - A 193 Gr.B8M CL2
ASTM - A 240 TYPE 316 / 316L /
9 GLAND FLANGE
H A 182 Gr.F316 / F316L H
ØC

ØD

8 GLAND BUSH ASTM - A 276 TYPE 316 / 316L

7 PACKING GRAPHITE
NOTE :- 6 GASKET SPW - SS 316 + GRAPHITE
I 5 STEM ASTM - A 182 Gr.F316 / F316L I
a) VALVE END TO END TO MFR'S STD ASTM - A 276 TYPE 316 / 316L +
b) BUTT WELD END TO ASME B 16.25 4 SEAT RING
STELLITE Gr.6
d (ON BOTH ENDS) ASTM - A 351 Gr.CF3M +
c) ALL DIMENSIONS ARE IN INCHES 3 WEDGE
L ±0.39 STELLITE Gr.6
J 2 BONNET ASTM - A 182 Gr.F316 / F316L J
CUSTOMER M/s, ROAL EQUIPMENT PROCESS & SERVICE S.A 1 BODY ASTM - A 182 Gr.F316 / F316L
DRAWING SHOWS ONLY SCHEMATIC REPRESENTATION OF THE VALVE
ENQUIRY Ref. EMAIL ENQUIRY DT: 23.01.2022 Sr.No DESCRIPTION MATERIAL OF CONSTRUCTION

PRIVATE AND CONFIDENTIAL GA - FORGED GATE VALVE

TITLE :-
K ANSI 800# K
THIS DOCUMENT AND ALL THE INFORMATION CONTAINED HERE IN ARE THE CONFIDENTIAL AND EXCLUSIVE PROPERTY OF
BELL-O-SEAL VALVES PVT LTD AND MAY NOT BE REPRODUCED, USED, DISCLOSED OR MADE PUBLIC IN ANY MANNER DRG No :- BOS-S-22959 Rev.00
PRIOR TO EXPRESS WRITTEN AUTHORIZATION BY BELL-O-SEAL VALVES PVT LTD. THIS DOCUMENT IS ACCEPTED PURSUANT
TO AGREEMENT TO THE FOREGOING, AND MUST BE RETURNED UPON DEMAND.
NAME DATE SCALE : N.T.S
DWN BY 29.01.2022
L C 1982 COPYRIGHTS RESERVED REPRODUCTION OR DISTRIBUTION OUTSIDE THE GROUP IS FORBIDDEN WITHOUT CHKD BY 29.01.2022 PROJECTION L
WRITTEN PERMISSION
APPD BY 29.01.2022
DESIGN SUBJECTED TO CHANGE WITHOUT PRIOR NOTICE ALL DIMENSIONS ARE IN INCHES

1 2 3 4 5 6 7 8 9 10 11 12 13 14
 1 2 3 4 5 6 7 8 9 10 11 12 13 14

VALVE T QTY APPROX WEIGHT REV DATE DESCRIPTION DWN BY CHKD BY APPD BY
BOS-P4-L4-F08 Rev.01 ØD ØP ØR t No. OF HOLE / Ø L H
SIZE X CLASS (FLG.THK) (Nos) PER VALVE (Kgs) 00 29.01.2022 For enquiry reference
A A
6" NB X 300# 12.50 10.62 8.50 1.44 0.06 12 / Ø78 17.50 9.64 01 108.0 DESIGN SPECIFICATION :

ASME B16.34 / BS 1868 &

2 REF. STD
MFR'S SPEC
12 API 598 / EN12266-1(300#)
B 13 TESTING STD B
11
SHELL 75 bar
10 9 HYD. TEST PRESSURE
SEAT 55 bar
5
C C
APPROX HEIGHT - " H "

4
3
1
D D

E E

ØD
ØR

ØP
F F

G G

6 13 LIFTING HOOK IS : 4190

t
7 12 FASTENER ASTM - A 193 Gr.B8 / A 194 Gr.8
8 T
11 GASKET SPW - SS 316 + GRAPHITE
H L ±0.078 H
10 HINGE PIN SS - 316
9 SPACE WASHER SS - 316
NOTE :- 8 SPLIT PIN IS: 549 - STEEL
7 DISC NUT SS - 316
I a) VALVE FACE TO FACE TO ASME B 16.10 I
6 DISC WASHER SS - 316
b)FLANGE END TO ASME B 16.5 WITH RAISED
FACE SERRATED FINISH (3.2µm to 6.3µm) 5 HINGE ASTM - A 351 Gr. CF8M
(ON BOTH ENDS) 4 DISC ASTM - A 351 Gr. CF8M
c) ALL DIMENSIONS ARE IN INCHES 3 SEAT RING ASTM - A 351 Gr. CF8M
J 2 COVER ASTM - A 351 Gr. CF8M J
CUSTOMER M/s, ROAL EQUIPMENT PROCESS & SERVICE S.A
DRAWING SHOWS ONLY SCHEMATIC REPRESENTATION OF THE VALVE 1 BODY ASTM - A 351 Gr. CF8M
ENQUIRY Ref. EMAIL ENQUIRY DT: 23.01.2022 Sr.No DESCRIPTION MATERIAL OF CONSTRUCTION
PRIVATE AND CONFIDENTIAL GA - CAST SWING CHECK
TITLE :-
K VALVE - ANSI 300# K
THIS DOCUMENT AND ALL THE INFORMATION CONTAINED HERE IN ARE THE CONFIDENTIAL AND EXCLUSIVE PROPERTY OF
BELL-O-SEAL VALVES PVT LTD AND MAY NOT BE REPRODUCED, USED, DISCLOSED OR MADE PUBLIC IN ANY MANNER DRG No :- BOS-S-22960 Rev.00
PRIOR TO EXPRESS WRITTEN AUTHORIZATION BY BELL-O-SEAL VALVES PVT LTD. THIS DOCUMENT IS ACCEPTED PURSUANT
TO AGREEMENT TO THE FOREGOING, AND MUST BE RETURNED UPON DEMAND.
NAME DATE SCALE : N.T.S
DWN BY 29.01.2022
L C 1982 COPYRIGHTS RESERVED REPRODUCTION OR DISTRIBUTION OUTSIDE THE GROUP IS FORBIDDEN WITHOUT CHKD BY 29.01.2022 PROJECTION L
WRITTEN PERMISSION
APPD BY 29.01.2022
DESIGN SUBJECTED TO CHANGE WITHOUT PRIOR NOTICE ALL DIMENSIONS ARE IN INCHES

1 2 3 4 5 6 7 8 9 10 11 12 13 14