Primatic HH Series
PUMP SPECIFICATIONS Cooling System**
A pressurized cooling flush water is introduced from centrifugal
Pump Size: 3-8 inches pump into vacuum pump’s water jacket and then flows back to
Max Flow: 1080 m3/h centrifugal pump. This cooling system cools the vacuum pump
Max Head: 492 feet (150 m)
quickly and brings most of the heat out of the vacuum pump’s
Solids Size: 0.7-3.5 inches
cavity, and makes its rotor has an extraordinary long life.
Mechanical Seal: Single mechanical seal 3”
Lip Seals: CR type, single lip, Buna-N (Bearing & SAE
Easy Maintenance Structure
Cover) and Viton(Stuffing box)
Non-Drive End Bearing: Single row ball bearing 6316 It is very convenient to remove the vacuum pump’s cover from
Drive End Bearing: Duplex angular contact bearing 7316 its non-drive end, and slides can be easily pulled out for
Air/Water Chamber: Steel material and designed to separate inspection or replacement. It is also easy to access to the
air and water before entering into vacuum pump suction centrifugal pump’s impeller, wear ring or mechanical seal for
hose. inspection or maintenance without removing diesel engine or
Discharge Non Return Valve: Swing type, cast iron with pump’s frame since the centrifugal pump’s suction cover can be
Buna-N disc (Viton optional)
fully opened.
Gasket: Aramid Fiber w/ EPDM
All-In-One Pump Applications
EVP Priming system’s powerful function makes pumps can be
VACUUM ASSISTED PRIMING SYSTEM used in almost all aspects of fluid industry, including well
point dewatering. Buy one pump and get all your jobs covered.
VACUUM-PRIME ® SYSTEM: Patent Pending self priming
pumps are equipped with the most powerful priming system
** cooling system is only needed for well point dewatering application.
and P-S-P mechnism. Pump sets a new benchmark of
vacuum assisted priming pumps in the industry ENGINE SPECIFICATIONS
VACUUM PUMP DATA*: Air Capacity: 112CFM
Vacuum: -26inHg(9m) Rated Power At Speed: 180-310kW @ 1800RPM
* at engine speed 2200 rpm
Engine Type: Water-cooled 6-cylinder inline engines with
PUMP FEATURES turbocharging, charge air cooling and cooled
external exhaust gas recirculation.
ECO Friendly Vacuum Priming System Displacement: 5.9-8.9 Liters
Self priming system has extraordinary features Fuel Tank: Min 200 Liters
like large air process capability, high vacuum, low operation Starter: 12/24 Volts Electric
temperature, maintenance free, oil and
mechanical seal free etc.
P-S-P Auto Switch System (Prime-Sleep-Prime)
EVP system will be switched to sleep status automatically PUMP MATERIAL OF CONSTRUCTION
once priming was finished. When it is used for general
purpose application, EVP system only operates for a few
Standard Optional 1 Optional 2 Optional 3
seconds for priming, which makes it almost unnecessary Main Parts
(code:38) (code:58) (code:88) (code:98)
for daily maintenance or changing spare parts within its life
Impeller CA6NMSS CA6NMSS 26% High Chrome CD4MCu
cycle.
Shaft 17-4PH 17-4PH 17-4PH 17-4PH
Dry Running Protection System Wear Ring Gray Iron Gray Iron Carbon Steel 316SS
Pumps offer three types of dry running seal options: Suction Cover Gray Iron Ductile Iron 26% High Chrome CD4MCu
oil reservoir lubricated mechanical seal, air cushion
Volute Gray Iron Ductile Iron 26% High Chrome CD4MCu
protected mechanical seal and grease lubricated lip seals
Stuffing Box Gray Iron Ductile Iron 26% High Chrome CD4MCu
configurations. Either of them can secure the
Adaptor Ductile Iron Ductile Iron Ductile Iron Ductile Iron
pump run dry for a long time.
HH SERIES PUMP DIMENSIONS Primatic
SKID MOUNTED
98.0"[2488mm]
Discharge Size
3" 150 lb
Suction Size
12.2" [310.7mm]
4" 150 lb
24.4" [620.6mm]
136.7"[3471mm]
59.8" [1520mm]
149.2" [3791mm]
HH SERIES OPTION CURVE
Office-Workshop : Jl. Salak 17, Wadas, Tridadi, Sleman, Yogyakarta - 55511
Telp/Fax : +62 274 2886376 / 0274 2887588
Branch Office : Casa de Verona Blok V20 no.1 Villa Mela Mas, Serpong, Tangsel - 15323
Telp/Fax : +62 21 55698015