Tabular minimisation

COMBINATIONAL CIRCUITS
Dr. Eng. Kamalanath Samarakoon
Quine-McCluskey (Tabular) Minimization

 Two step process utilizing tabular listings to:

 Identify prime implicants (implicant tables)
 Identify minimal PI set (cover tables)
 All work is done in tabular form
 Number of variables is not a limitation
 Basis for many computer implementations
 Don’t cares are easily handled
 Proper organization and term identification
are key factors for correct results
 Quine-McCluskey Minimization (cont.)
 Terms are initially listed one per line in
groups
 Each group contains terms with the same
number of true and complemented variables
 Terms are listed in numerical order within group
 Terms and implicants are identified using
one of three common notations
 full variable form
 cellular form
 1,0,- form
 Notation Forms used

 1,0,- form - terms are identified by their

binary index value
 Easier to translate to/from full variable form
 Easy to identify when adjacency applies, one bit
is different
 - shows variable(s) dropped when adjacency is
used
 Example of Different Notations
F(A, B, C, D) =  m(4,5,6,8,10,13)

Full variable Cellular 1,0,-

1 ABCD 4 0100
ABCD 8 1000
2 ABCD 5 0101
ABCD 6 0110
ABCD 10 1010
3 ABCD 13 1101
 Implication Table (1,0,-)
 Quine-McCluskey Method
Implication Table
 Tabular method to
systematically find all prime Column I
implicants
0000
 ƒ(A,B,C,D) = Σ m(4,5,6,8,9,
10,13) + Σ d(0,7,15) 0100
 Part 1: Find all prime 1000
implicants
0101
 Step 1: Fill Column 1 with 0110
active-set and DC-set minterm 1001
indices. Group by number of 1010
true variables (# of 1’s).
0111
1101
NOTE: DCs are included in this step! 1111
 Implication Table (cellular)
 Quine-McCluskey Method
Implication Table
 Tabular method to
systematically find all prime Column I
implicants
0
 ƒ(A,B,C,D) = Σ m(4,5,6,8,9,
10,13) + Σ d(0,7,15) 4
 Part 1: Find all prime 8
implicants
5
 Step 1: Fill Column 1 with 6
active-set and DC-set minterm 9
indices. Group by number of 10
true variables (# of 1’s).
7
13
NOTE: DCs are included in this step! 15
 Minimization - First Pass (1,0,-)
 Quine-McCluskey Method
 Tabular method to systematically find all Implication Table
prime implicants
Column I Column II
 ƒ(A,B,C,D) = Σ m(4,5,6,8,9,10,13) + Σ
d(0,7,15) 0000  0-00
 Part 1: Find all prime implicants -000
0100 
 Step 2: Apply Adjacency - Compare 1000  010-
elements of group with N 1's against 01-0
those with N+1 1's. One bit difference 0101  100-
implies adjacent. Eliminate variable and 0110  10-0
place in next column. 1001 
1010  01-1
E.g., 0000 vs. 0100 yields 0-00 -101
0000 vs. 1000 yields -000 0111  011-
1101  1-01
When used in a combination, mark with a
check. If cannot be combined, mark with 1111  -111
a star. These are the prime implicants. 11-1
Repeat until nothing left.
 Minimization - First Pass (cellular)
 Quine-McCluskey Method
 Tabular method to systematically find all Implication Table
prime implicants
Column I Column II
 ƒ(A,B,C,D) = Σ m(4,5,6,8,9,10,13) + Σ
d(0,7,15) 0 0,4(4)
 Part 1: Find all prime implicants 0,8(8)
4
 Step 2: Apply Adjacency - Compare 8 4,5(1)
elements of group with N 1's against 4,6(2)
those with N+1 1's. 2n difference implies 5 8,9(1)
adjacent. Next col is numbers with diff in 6 8,10(2)
parentheses. 9
10  5,7(2)
E.g., 0 vs. 4 yields 0,4(4) 5,13(8)
5 vs. 7 yields 5,7(2) 7 6,7(1)
13  9,13(4)
When used in a combination, mark with a
check. If cannot be combined, mark with 15  7,15(8)
a star. These are the prime implicants. 13,15(2)
Repeat until nothing left.
 Minimization - Second Pass (1,0,-)
 Quine-McCluskey Method
 Step 2 cont.: Apply Adjacency - Compare Implication Table
elements of group with N 1's against
those with N+1 1's. One bit difference Column I Column II Column III
implies adjacent. Eliminate variable and
0000  0-00 * 01-- *
place in next column. -000 *
E.g., 0000 vs. 0100 yields 0-00 0100  -1-1 *
0000 vs. 1000 yields -000 1000  010- 
01-0 
When used in a combination, mark with a 0101  100- *
check. If cannot be combined, mark with 0110  10-0 *
a star. These are the prime implicants. 1001 
1010  01-1 
-101 
Repeat until nothing left. 0111  011- 
1101  1-01 *

1111  -111 
11-1 
 Minimization - Second Pass (cellular)
 Quine-McCluskey Method
 Step 2 cont.: Apply Adjacency - Compare Implication Table
elements of group with N 1's against
those with N+1 1's. 2n difference implies Column I Column II Column III
adjacent. Next col is numbers with
0 0,4(4) * 4,5,6,7(3) *
differences in parentheses. 0,8(8) *
E.g., 4,5(1) and 6,7(1) yields 4 5,7,13,15
4,5,6,7(3) 8 4,5(1)  (10) *
4,6(2) 
When used in a combination, mark with a 5 8,9(1) *
check. If cannot be combined, mark with 6 8,10(2) *
a star. These are the prime implicants. 9
Repeat until nothing left. 10  5,7(2) 
5,13(8) 
7 6,7(1) 
13  9,13(4) *

15  7,15(8) 
13,15(2) 
 Prime Implicants

Prime Implicants:
A
AB
00 01 11 10
ACD BCD
CD
00
0-00 -000
X 1 0 1

01 0 1 1 1 -ABC
100 -0ABD
10
D

C
11 0 X X 0 ACD
1-01 -1-1BD
10
01--AB
0 1 0 1

B
 Prime Implicants (cont.)

Prime Implicants:
A
AB
00 01 11 10
ACD BCD
CD
00
0-00 -000
X 1 0 1

01 0 1 1 1 -ABC
100 -0ABD
10
D

C
11 0 X X 0 ACD
1-01 -1-1BD
10
01--AB
0 1 0 1

Stage 2: find smallest set of prime implicants that cover the

active-set

recall that essential prime implicants must be in final

expression
 Coverage Table
Coverage Chart

4 5 6 8 9 10 13
0,4(0-00) X

0,8(-000) X

8,9(100-) X X Note: Don’t include DCs in

8,10(10-0) X X
coverage table; they don’t
have covered by the final
9,13(1-01) X X
logic expression!
4,5,6,7(01--) X X X

5,7,13,15(-1-1) X X

rows = prime implicants

columns = ON-set elements
place an "X" if ON-set element is
covered by the prime implicant
 Coverage Table (cont.)
Coverage Chart

4 5 6 8 9 10 13 4 5 6 8 9 10 13
0,4(0-00) X 0,4(0-00) X

0,8(-000) X 0,8(-000) X

8,9(100-) X X 8,9(100-) X X

8,10(10-0) X X 8,10(10-0) X X

9,13(1-01) X X 9,13(1-01) X X

4,5,6,7(01--) X X X 4,5,6,7(01--) X X X

5,7,13,15(-1-1) X X 5,7,13,15(-1-1) X X

rows = prime implicants If column has a single X, than the

columns = ON-set elements implicant associated with the row
place an "X" if ON-set element is is essential. It must appear in
covered by the prime implicant minimum cover
 Coverage Table (cont.)
4 5 6 8 9 10 13
0,4(0-00) X

0,8(-000) X

8,9(100-) X X

8,10(10-0) X X

9,13(1-01) X X

4,5,6,7(01--) X X X
X
5,7,13,15(-1-1) X

Eliminate all columns covered by

essential primes
 Coverage Table (cont.)
4 5 6 8 9 10 13 4 5 6 8 9 10 13
0,4(0-00) X 0,4(0-00) X

0,8(\000) X 0,8(\000) X

8,9(100-) X X 8,9(100-) X X

8,10(10-0) X X 8,10(10-0) X X

9,13(1-01) X X 9,13(1-01) X X

4,5,6,7(01--) X X X 4,5,6,7(01--) X X X
X X
5,7,13,15(-1-1) X 5,7,13,15(-1-1) X

Eliminate all columns covered by Find minimum set of rows that

essential primes cover the remaining columns


FAB
DA
CD
AB