SECTION 6

NV11
MANUAL SET

TECHNICAL
APPENDICES

Innovative Technology assume no responsibility for errors, omissions, or damages

resulting from the use of information contained within this manual.
NV11 Manual Set – Section 6 2

NV11 MANUAL SET – SECTION 6

6. TECHNICAL APPENDICES 3
APPENDIX A – PRODUCT APPROVALS 3
APPENDIX B – TECHNICAL SPECIFICATIONS 5
APPENDIX C – GLOSSARY OF TERMS 7
APPENDIX D – ORDERING INFORMATION 10

Copyright © Innovative Technology Ltd 2014 GA00963-2

NV11 Manual Set – Section 6 3

6. TECHNICAL APPENDICES

APPENDIX A – PRODUCT APPROVALS

CE Marking

The NV11 unit described in this manual set has been designed to comply with the
relevant sections of the following Harmonised European Standards:

 EN60950-1:2001
 EN60335-1:2002
 EN60335-2-82:2003

The unit complies with all the applicable essential requirements of the Standards.

RoHS

The following products, identified by the part numbers listed in the table below, are
compliant with the European Union Directive 2002/95/EC of the Restriction of the use
of certain Hazardous Substances (RoHS) in Electrical and Electronic Equipment.

Product Description Lead free date

NV11 Bank Note Acceptor Assembly All NV11

We hereby declare that lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium
(Cr4-6), polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE),
are not intentionally added to our products in amounts exceeding the maximum
concentration values as defined by RoHS regulations (except where the application of
any of those substances comes within the scope of the RoHS regulations exempted
applications).

All compliant products are clearly marked on the product and/or packaging.

All the information provided in this statement of compliance is accurate to the best of
our knowledge, as of the date of this publication being issued.

Copyright © Innovative Technology Ltd 2014 GA00963-2

NV11 Manual Set – Section 6 4

WEEE

The European Union’s directive 2002/96/EC on Waste Electrical and Electronic

Equipment (WEEE) was adopted by the European Council and Parliament in 2003 with
a view to improving the collection and recycling of Waste Electrical and Electronic
Equipment throughout the EU, and to reduce the level of non-recycled waste. The
directive was implemented into law by many EU member states during 2005 and
2006.

Products and packaging that display the symbol (shown left) indicates
that this product must NOT be disposed of with other waste. Instead
it is the user’s responsibility to dispose of their Waste Electrical and
Electronic Equipment by handing it over to an approved reprocessor,
or by returning it to the original equipment manufacturer for
reprocessing.

Copyright © Innovative Technology Ltd 2014 GA00963-2

NV11 Manual Set – Section 6 5

APPENDIX B – TECHNICAL SPECIFICATIONS

The information contained here does not form part of a contract and is subject to
change without notice. Innovative Technology Ltd operates a policy of continual
product development; as such specifications may change from time to time.

Environment:

Minimum Maximum
Temperature +3 °C +50 °C
Humidity 5% 95 % non condensing

Power Requirements:

DC Voltage Minimum Nominal Maximum

Absolute limits 10.8 V 12 V 13.2 V
Supply ripple voltage 0V 0V 0.25 V @ 100 Hz
Supply Current
Standby 350 mA
Running 3A
Peak (motor stall) 3.5 A

WARNING! Ensure that the supply voltage to the NV11 is not

lower than 10.8 V and that the power supply can
Use suitable power supply
provide sufficient current to avoid incorrect
operation and excessive note rejects.

We recommend that your power supply is capable of supplying 12V DC at 4 A.

 For 12V operation, use TDK Lambda model SWS50-12. This power supply is
available from a variety of suppliers including Farnell (stock code 1184645) and
RS (stock code 466-5869).

Logic Levels:

Interface Logic Levels Logic Low Logic High

Inputs 0 V to +0.5 V +3.7 V to +12 V
Outputs (2.2 kΩ pull-up) +0.6 V Pull-up voltage of host
interface
Maximum current sink 50 mA per output

Copyright © Innovative Technology Ltd 2014 GA00963-2

NV11 Manual Set – Section 6 6

General Specifications:

Note Sizes Minimum Maximum

Width 60 mm 82 mm in cashbox
80mm in Note Float module
Length 115 mm 150 mm

Capacity
Storage 300 or 600 notes
Note Float module 30 notes

Weight
NV11 2.2 kg

Interface Protocol
eSSP; ccTalk (CC1, CC4)

Copyright © Innovative Technology Ltd 2014 GA00963-2

NV11 Manual Set – Section 6 7

APPENDIX C – GLOSSARY OF TERMS

Term Meaning

A Ampere

AC Alternating Current

ACK Acknowledge

AES Advanced Encryption Standard

ASSY Assembly

AV Average

AWG American Wire Gauge

AWP Amusement With Prizes

BNV Bank Note Validator

ccTalk Coin Controls Talk

COMMS Communications

CRC Cyclic Redundancy Check

DC Direct Current

DIA Diameter

DIP Dual Inline Package

ECB Electronic Code Book

EEPROM Electrically Erasable Programmable Read Only

Memory

eSSP Encrypted Smiley® Secure Protocol

FAQ Frequently Asked Questions

FIFO First In, First Out

GA General Assembly

GND Ground

Hz Hertz

Copyright © Innovative Technology Ltd 2014 GA00963-2

NV11 Manual Set – Section 6 8

Term Meaning

IF Interface

ITL Innovative Technology Ltd

LED Light Emitting Diode

LIFO Last In, First Out

mA milliampere

max maximum

MDB Multi Drop Bus

min minimum

mm millimetre

ms millisecond

MOD Modified (or Modification)

NV Note Validator

PCB Printed Circuit Board

PDF Portable Document Format

PiPS Pay-in Pay-out System

PROM Programmable Read Only Memory

PSU Power Supply Unit

QTY Quantity

RAM Random Access Memory

ROM Read Only Memory

Rx Receive

RoHS Restriction of the use of certain Hazardous

Substances

SIO Serial Input Output

SSP Smiley® Secure Protocol

SWG Standard Wire Gauge

Copyright © Innovative Technology Ltd 2014 GA00963-2

NV11 Manual Set – Section 6 9

Term Meaning

SWP Skill With Prizes

SYNC Synchronize

TTL Transistor Transistor Logic

Tx Transmit

USB Universal Serial Bus

V Volt

V_In Voltage In

WEEE Waste Electrical and Electronic Equipment

Copyright © Innovative Technology Ltd 2014 GA00963-2

NV11 Manual Set – Section 6 10

APPENDIX D – ORDERING INFORMATION

The following information is required to order an NV11 validator:

Product NV11 Consists of NV9USB validator, Note Float module,

bezel and cash box

Dataset Country code and Alternatively supply details of the currency and
variant note types you wish to use

Bezel Size 66 - 85 mm Please check the NV11 product page on the ITL
website for details of the bezels available

Cash Box 300 or 600 note Please check the NV11 product page on the ITL
capacity website for details of the range of available
cashboxes

Interface eSSP; ccTalk The NV11 can be used with CC1 or CC4 variants
of ccTalk

Copyright © Innovative Technology Ltd 2014 GA00963-2

NV11 Manual Set

MAIN HEADQUARTERS Innovative Technology Ltd

Derker Street – Oldham – England - OL1 4EQ
Tel: +44 161 626 9999 Fax: +44 161 620 2090
E-mail: [email protected]
Web site: www.innovative-technology.co.uk

AUSTRALIA
[email protected]

BRAZIL
[email protected]

CHINA
[email protected]

GERMANY
[email protected]

ITALY
[email protected]

SPAIN
[email protected]

UNITED KINGDOM
[email protected]

REST OF THE WORLD

[email protected]

Copyright © Innovative Technology Ltd 2014 GA00963-2