Scribd
Upload
40 views2 pages

SPK36080

This document provides specifications for a lifting crane. It has a maximum lifting moment of 34.8 metric tons and maximum lifting capacity of 8,500 kilograms. The maximum outreach is 8.1 meters on an 3-axle truck configuration. It features electronic overload protection, emergency stop buttons, high speed boom extension, and is constructed of high tensile steel according to European safety standards.

Uploaded by

hendry.muliyanto16
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views2 pages

SPK36080

This document provides specifications for a lifting crane. It has a maximum lifting moment of 34.8 metric tons and maximum lifting capacity of 8,500 kilograms. The maximum outreach is 8.1 meters on an 3-axle truck configuration. It features electronic overload protection, emergency stop buttons, high speed boom extension, and is constructed of high tensile steel according to European safety standards.

Uploaded by

hendry.muliyanto16
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SPK 36080 - MH

•• Electronic Overload Protection (Paltronic 50) and Emerency Stop Button


••
••
Up to 10% increased lifting capacity with High Power Lifting System (HPLS)
High speed boom extension and refraction with Return Oil Utilization feature
34.8 mt
Max. lifting
•• Optimized lifting performance with the use of high tensile steel and hexagonal moment
boom design
•• Light weight yet robust construction according to European standards (EN12999)
•• Optional Overload Protection and Emergency Stop Button
•• Professional Installation Solutions 12.1 m
•• Suitable for installation on 3-axle trucks Max. outreach
TECHNICAL SPECIFICATIONS (EN 12999 H1-B3)

Max. Lifting Moment mt 34.8

Max. Lifting Capacity kg 8500

Max. Outreach m 8.1 (A) / 10.1 (B) / 12.1 (C)

Slewing Angle o 400

Slewing Torque mt 3.8

Stabilizer Spread m 6.0 (R3X)

Fitting Space Required (Std) m 0.975

Width Folded m 2.5

Operating Pressure bar 330

Recommended Pump Capacity l/min 55 - 80

Dead Weight (Std) kg 3118

SPK 36080 A SPK 36080 C

Authorized Dealer:

Units shown in the leaflet are partially optional equipped and do not always correspond to the standard version. Country-specific regulations must be observed. Dimensions may vary. Subject to
technical changes, errors and translation mistakes.

Asia Pacific Distributor Managed By: 3 International Business Park | Nordic European Centre
#05-25/26 | Singapore 609927
PALFINGER ASIA PACIFIC PTE LTD T +65 6592 9192 F +65 6591 7737
[email protected] www.palfinger.com
SPK36080, 02/15

You might also like