DRIVELINE
HiTEC® 3339
Multifunctional Gear Additive Package
With Exceptional Base Oil Compatibility for Use with
Automotive and Industrial Gear Lubricants
DRIVELINE
HiTEC® 3339 Multifunctional Gear Additive Package
With Exceptional Base Oil Compatibility for Use with Automotive and Industrial Gear Lubricants
Key Performance Benefits Exceptional Base Oil Compatibility
• Created by formulation expertise with an extensive history of trouble-
free performance worldwide Additive in Group III base oil Additive in PAO
• Multifunctional gear additive with robust performance in automotive
and industrial gear lubricants
• Excellent solubility in Group I, II, III base oils and PAO formulations
• Expanded applications by using boosters
• Enhanced yellow metal protection
• Field tested to provide greater assurance
• Operational savings through inventory rationalization of additive and HiTEC® 3339 Alternate technology HiTEC® 3339 Alternate technology
base oils
Enhanced Yellow Metal Protection
Recommended Dosage
Automotive lubricant
3.9% wt. API GL-5, ZF TE-ML 07A
2.0% wt. API GL-4
Industrial Lubricant
1.2% wt. AIST 224, David Brown S1.53.101 (E),
AGMA 9005-E02
0.1 - 1.0% wt. EP and Antiwear component
Used with other Afton Additives to expand applications
At 1b rating, HiTEC 3339®
Additives Application provides enhanced
Fluids of 3b rating
Excellent
offer insufficient
HiTEC® 397 Limited Slip Differential (LSD) protection for axle parts
Poor
protection and may
bushings, thrust washers cause damages with
HiTEC® 648H Clean gear and bearings which may extended use.
HiTEC® 3301 Long oil life contain yellow metal.
HiTEC® 5760 Wide viscosity for extreme conditions
Please contact your Afton Chemical representative
for specific recommendations.
Robust Performance Demonstrated in Field Tests
Typical Characteristics
Inspection Typical
Appearance Orange Red Liquid
Sp. Gr. @ 15.6/15.6°C 1.001
Kinematic Viscosity @ 100°C, cSt 2.5
Flash Point (PMCC), °C 76 min
Handling Information
Max Handling Temp: 80°C
Shelf Life @ ambient: 24 months
© 2013. Afton Chemical Corporation is a wholly owned subsidiary of NewMarket Corporation (NYSE:NEU). HiTEC® is a trademark of Afton Chemical Corporation. AP 08/13.
The information in this bulletin is, to our best knowledge, sure and accurate, but all recommendations or suggestions are made without guarantee since the conditions of use
are beyond our control. Afton Chemical Corporation and its affiliates disclaim any liability incurred in connection with the use of these data or suggestions. Furthermore, nothing
contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use.
