Technical Support and E-Warranty Certificate www.vevor.

com/support

DIESEL HEATER

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain
tools with us compared to the major top brands and doses not necessarily
mean to cover all categories of tools offered by us. You are kindly
reminded to verify carefully when you are placing an order with us if you
are actually saving half in comparison with the top major brands.

-1-
 DIESEL HEATER

MODEL:XMZ-D1

MODEL:XMZ-D2

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to
contact us:
[email protected]

This is the original instruction, please read all manual instructions

carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.

-2-
 Warning-To reduce the risk of injury, the user must read the
instructions manual carefully.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:(1)This device may not cause
harmful interference, and (2)this device must accept any
interference received, including interference that may cause
undesired operation.
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to a
collection point for recycling electrical and electronic devices.

SAFETY INSTRUCTION

1. Following measures shall not be adopted

• Change the important component of the diesel heater.
• Make use of spare parts from other manufacturers without permission.
• Disobey the instruction and guide during installation or operation.
2. Only allow using original attachment and spare parts during installation and
maintenance.
3. The heaters shall not be used in places where they may form flammable vapor
or dust, for example:
•Fuel depot
•Carbon storehouse
•Timber storehouse
•Granary and similar sites
•Diesel/petrol station
And keep away from fuel tanks, compression tanks, fire extinguishers, clothes, or

-3-
other flammable objects.
4. Do not use cigarette lighter for startup.
5. Do not use the heater in closed and/or unventilated places.
6. The heaters shall be turned off when filling fuel.
7. Do not cut off the electric power in operation.
8. If the fuel leak or discharge from the fuel system of heaters, please contact with
VEVOR to repair.
9. Place the exhaust outlet outside to prevent any penetration of exhaust fumes.
10. In the process of work, it is forbidden to cut off the electric power directly to
stop the heater from working.
11. Seal all gaps between the mounting plate and the car body.
12. The machine will stop heating after over-temperature protection. Please do
not power off. After the machine is naturally cooled and turned off, it can be
restarted.
13. After turning off the machine, please do not immediately disconnect the power
supply. It takes 3-5 minutes for the machine to stop working completely.
14. After starting the machine for 3-5 minutes, it will work normally and heat up.
Please wait patiently.
15. When the heater is just started, the current is relatively high, so an adapter
with a voltage of 12V and a current of 15A or greater is required for the power
supply.

PRODUCT FUNCTION

1.The diesel heater (hereinafter referred to as the heater) is independent of the

original engine system. It makes use of a 12V direct current to drive. There are two
kinds of control modes for the heater: Automatic control mode and Manual control
mode. The heater adopts light diesel which corresponds to the environmental
temperature as fuel, and it can be started and operated normally at the
temperature of above-40N. The inhaled fresh air is heated to hot air through the
heat exchanger by the energy which comes from fuel burning, then blown to where
it is needed. This type of heater owns the advantage of compact structure, light
weight, high thermal efficiency, economize on electricity and fuel, and easy

-4-
installation.
2.The heater get rid of damage to car caused by the sudden drop of temperature,
improve the temperature inside the car, and preheat the engine coolant to avoid
the engine wear at low temperature. Conducive to car interior thawing, car start,
and car glass defrost fog.

INTERNAL STRUCTURE

-5-
 INSTALLATION POSITION

1.On the co-driver's legroom.

2.On the back wall of the cab.
3.Driver's seat backrest.
4.Within the tool box.

1. In front of the passenger seat.

2. Between the driver seat and passenger seat.
3. 3&4 under the container.
4. In the trunk.

The heater is mainly installed in the passenger

room or baggage room of the vehicle. If it cannot
be installed, fix the heater under the underside of
the vehicle, but be ware of splashing.

1.Inside the driver's seat.

2.On the back wall of the cab.
3.Inside the protection box.

-6-
 MODEL

Model XMZ-D2 XMZ-D1

Appearance

Power ZWH 2/5/8KW 5/8KW 5/8KW

Heating medium Air Air Air
Fuel Diesel Diesel Diesel
Ratings 12V/40W 12V/40W 12V/40W

PACKING LIST

Model XMZ-D2 XMZ-D1

Main engine 1 1

Intake pipe 1 1

Exhaust pipe 1 1
Blowpipe 1 1
Remote control 1 1

Silencer with 1 1 1
fixing piece and 2
screws
Blowpipe clamp 2 2
Clamp 4 4
Pipe clip 2 2

-7-
Air filter element 1 1
Nut 5 4
The screw for the 4 4
lock catch
Machine fixing 4 4
screws
Oil pipe 1 /
Liquid crystal 1 /
switch
Rotary tuyere 1 /

Power cord 1 /

Oil filter 1 /

Fuel pump sheath 1 /

with a screw
Ribbon 12 /
Oil pipe clip 12 /
Fuel tank 1 /
Oil tank 1 /
accessories
Machine fixing 1 /
piece
Fuel pump 1 /
User Manual 1 1

-8-
 INSTALLATION DIAGRAM

XMZ-D2（Split type）

During installation, the oil tank should be properly placed above the main engine to
facilitate the operation of the fuel pump.

-9-
XMZ-D1（Horizontal type）

- 10 -
XMZ-D1（Vertical type）

Warning：
1.The air inlet shall not be blocked, and keep the inlet open and clear.
2.Keep the exhaust pipe clear.The exhaust pipe outlet shall be kept away
from anything flammable, and avoid heating and igniting the flammable
goods and loading cargo on the ground.
3.To ensure optimal combustion, please remember that the smoke exhaust
pipe cannot be placed upward, but must be placed horizontally or

- 11 -
downward.

REMOTE CONTROL OPERATION INSTRUCTIONS

After starting the machine for 3-5 minutes, it will work normally and heat up.
Please wait patiently.

Key Description

【 】On/Off key；

【】【】：Gear/Temperature/Item adjustment key；

【M】：Mode switching/Setup key;

- 12 -
working mode
① In gear mode, the setting gear can be adjusted within the range of 1 to 10
gears.
② In the temperature control mode, the set temperature can be adjusted within the
range of 8~36℃. The gear position of the control switch varies with the
temperature in the cab. When the temperature rises or decreases, the control
switch will automatically adjust the operating gear position, which is fast reaches
the set temperature and allows the heater to operate more intelligently and
economically.
③ When a fault occurs during operation, the control switch display window will
flash to display the fault code for a more accurate and intuitive finding of the fault.

Operating instructions:

•On/Off: Press 【 】 to start the machine in the off state; Press 【 】 to shut

down the machine when it is turned on.

• Mode switching: under the temperature control mode, press [M] to switch to
gear mode, and under gear mode, press 【 M 】 to switch to temperature control
mode.

• Gear adjustment: press 【  】 to run gear/temperature+1, up to 10 gear/36℃,

press【】to run gear/temperature - 1, down to 1 gear/8℃.
• Time setting: In the power-on state, the screen displays the current time, and
long press【】for 3s to enter the time setting:
Item 1: To set the current time, press【M】to set it, and press【】【】to switch.
Item 2: Set the automatic start time using the same method as above.
Item 3: Refers to the operation time after automatic startup, and the setting
method is the same as above. The switching unit is 0.5 hour.
Item 4: Set the automatic start function ON/OFF. After the automatic start
function is enabled, the screen alarm clock icon will always be on.

After all adjustments are successful, press and hold 【 M 】 for 3s to save all time
settings and return to the operation interface.
Press【M】to set, press【】【】to switch, press【M】again to confirm the setting,

- 13 -
and after all time settings are completed, press and hold 【 M 】 for 3s to set
successfully and return to the operation interface;

•Engineering mode: Press and hold【】【】for 3s in the startup state to enter

engineering mode, press【】item+1, and press【】item - 1. In engineering mode,
the display area displays data items:
001: Heater main board version number.
002: Fault code.
003: Shell temperature.
004: Power supply voltage.
005: Heater operating gear.
006: Cab temperature.
007: Altitude.
010: Bluetooth matching.

•Remote control matching: When the machine is turned on, press and hold【】
for 3s to display 'rte' on the screen. At this time, press any key on the remote
control. If the matching is successful, the system will automatically return to the
operation interface.

•Bluetooth matching (optional): open the mobile phone applet, press the【Set】
key, set the 4-digit password, and then adjust the switch to enter the 010 project in
the engineering mode. The interface displays the original password. The code
flashes until the original password changes to the set password, and the interface
display changes to "SUC". After successful matching, it automatically returns to
the operation interface.

•Query the local Bluetooth name: After turning on the machine, press 【 】【M】

for 3s at the same time, the screen displays the Bluetooth name in 4-digit
characters (0-F), and the non Bluetooth version screen displays "NULL". Press
any key again to exit.

•Language switching: Press and hold【M】

【】for 3s while turning on the machine

- 14 -
to switch, and cycle through the sequence of "English", "German", "Russian", and
"voice off ";

•Oil pumping mode: Under the first power-on and power-off state, press and hold
【】for 7s, and the display area starts to count down for 300s to start pumping oil.

After the countdown is completed, the pump automatically ends or press 【 】 to

end pumping oil and shut down;

•Fault display: When the heater fails, the display area flashes a fault code, and
the fault type is shown in the table below:

code Fault Message Handling Method

1.Check that the heater supply voltage type
matches the actual vehicle voltage.
2.Check that the supply voltage is not higher
E-01 Abnormal voltage
than 18V or lower than 9V.
3.Check that the main harness connector is not
loosely connected.
1.Check whether the ignition plug is connected
falsely.
Ignition plug 2.The ignition plug is faulty; replace the ignition
E-03
abnormality plug.
3.Main board is faulty; replace the main board.

1.Check whether the oil pump plug is loose and

connected falsely.
Oil pump
E-04 2.Check the main wiring harness for
abnormality
disconnection.
3.Oil pump is faulty; replace the oil pump.
1.Incorrect or faulty furnace temperature sensor
High temperature
E-05 type; replace the sensor.
protection
2.Main board is faulty; replace the main board.
E-06 Fan abnormality 1.Check whether the fan impeller of the car is

- 15 -
 jammed.
2.Check whether the fan plug is loose and
falsely connected.
3.The fan is faulty; replace the fan.
4.Check whether the wind wheel induction
magnet is missing or has
the wrong polarity.
5.Check whether the main board wind speed
sensor is normal.
6.The main board is faulty; replace the main
board.
Flame out due to
E-08 Checking the fuel tank for lack of oil.
lack of oil
1.Detect whether the outlet air temperature
sensor connector is loose and connected
Overheat falsely. 2.The air outlet sensor is faulty, replace
E-09
protection sensor the main board.
3.The main board is faulty; replace the main
board.
1.Check whether the oil pump works.
Secondary startup
E-10 2.Check whether the interfaces of the oil circuit
failed
are hanging wax and blocked.

BLUETOOTH OPERATION

Search and download the corresponding APP name "airHeaterBle" in IOS or

Android APP store, then please follow the below step to connect and control the
heater with a mobile phone.

- 16 -
 IOS App Android APP
APP Store search “airHeaterBle”

1.Query the Bluetooth name:After turning on the machine, press 【 】【M】for

3s at the same time, the screen displays the Bluetooth name in 4-digit characters
(0-F).

2. Connect to the mobile phone via Bluetooth:Click on the Bluetooth symbol in

the upper right corner, find the corresponding local Bluetooth number: BYD+MAC
address of the Bluetooth device+4 digits from the controller(Refer to the picture
above), then click on the Bluetooth number to connect.

- 17 -
3.Click the button to go to the settings screen, you can set the password and

click "Confirm" to save the settings. If the password is modified, the switch needs
to modify the password according to the above Bluetooth matching operation
method.

- 18 -
4. Long press the【 】to turn on/turn off the heater.

5. Click "mode" button to switch the gear mode or temperature control mode, then
Click "up +" /"down -” button to increase + or decrease- the level (level
1-10)/temperature(8°C~36°C).

- 19 -
6. Fault display: when the heater fails, it will display the fault code E-xx, see the
table mentioned earlier for the type of fault.

- 20 -
Address：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi
Shanghai

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD

NSW 2122 Australia
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E
RANCHO CUCAMONGA, California, 91730 United States of America

Pooledas Group Ltd

UK REP Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom

SHUNSHUN GmbH
EC REP Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany

Made In China

- 21 -
Technical Support and E-Warranty Certificate
www.vevor.com/support