OWNER’S MANUAL

LG Wi-Fi
Sound Bar
Please read this manual carefully before operating your set and retain it for future
reference.

MODEL
SL10YG (SL10YG, SPL8-W)

www.lge.com
1902_Rev02 Copyright © 2019 LG Electronics Inc. All Rights Reserved.
 2 Getting Started

Safety Information NOTICE: For safety marking information including

product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
CAUTION
1 RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION concerning the Power Cord
Getting Started

The Power Plug is the disconnecting device. In case

CAUTION: TO REDUCE THE RISK OF ELECTRIC of an emergency, the Power Plug must remain readily
SHOCK DO NOT REMOVE COVER (OR BACK) accessible.
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL. Check the specification page of this owner’s manual
to be certain of the current requirements.
This lightning flash with arrowhead Do not overload wall outlets. Overloaded wall outlets,
symbol within an equilateral triangle loose or damaged wall outlets, extension cords, frayed
is intended to alert the user to the power cords, or damaged or cracked wire insulation
presence of uninsulated dangerous are dangerous. Any of these conditions could result
voltage within the product’s in electric shock or fire. Periodically examine the
enclosure that may be of sufficient magnitude to cord of your device, and if its appearance indicates
constitute a risk of electric shock to persons. damage or deterioration, unplug it, discontinue use of
The exclamation point within an the device, and have the cord replaced with an exact
equilateral triangle is intended replacement part by an authorized service center.
to alert the user to the presence Protect the power cord from physical or mechanical
of important operating and abuse, such as being twisted, kinked, pinched, closed
maintenance (servicing) instructions in a door, or walked upon. Pay particular attention to
in the literature accompanying the product. plugs, wall outlets, and the point where the cord exits
the device.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
 Getting Started 3

Symbols

~ Refers to alternating current (AC).

0 Refers to direct current (DC). 1

Refers to class II equipment.

Getting Started
1 Refers to stand-by.
! Refers to “ON” (power).

Refers to dangerous voltage.

4 Table of Contents

Table of Contents

1 Getting Started 2 Connecting

2 Safety Information 16 Network connection
6 Introduction 16 – Installing “Google Home” App
7 Front panel 17 – Launch the app to connect Wi-Fi
9 Rear panel 18 Organizing cables
10 Remote control 18 Wireless subwoofer and rear speaker (Sold
13 Installing the sound bar Separately) connection
14 Mounting the main unit on a wall 18 – Wireless subwoofer connection
20 – Rear speakers connection (Sold
Separately)
21 – Surround sound
24 – How to Affix the Ferrite Core
25 Connecting to your TV
25 – Using an OPTICAL cable
25 – LG Sound Sync
27 – Using an HDMI cable
27 – ARC (Audio Return Channel) function
27 – What is SIMPLINK?
28 – Additional information for HDMI
29 Optional equipment connection
29 – DOLBY ATMOS®
29 – DTS:X™
30 – HDMI IN connection
30 – OPTICAL IN connection
31 – USB connection
 Table of Contents 5

1
3 Operating 4 Troubleshooting
34 USB operation 47 Troubleshooting
35 How to use the Google Assistant 47 – General
35 – Talk to the Google Assistant 49 – Network
2
37 – Reference site for Google Assistant Help 49 – Application
38 Control your TV and Sound Bar with Voice 50 – NOTES to use wireless
command 50 – NOTES to release Demo mode
38 – Available voice commands
40 “LG Wi-Fi Speaker”
5 Appendix 3
40 – Installing “LG Wi-Fi Speaker” App
41 Using a Bluetooth Wireless Technology 51 File requirement
41 – About Bluetooth 51 Trademarks and licenses
41 – Bluetooth profiles 52 Specifications
41 – Listening to Music of a Bluetooth Device 54 Handling the Speaker 4
44 Other operations 54 Important Information Relating to Network
44 – Using your TV remote control Services
44 – AUTO POWER On/Off 55 TERMS OF USE
45 – Auto function change
46 Standby mode 5
46 – Standby mode
46 – Networked standby mode
46 Reset the Speaker
 6 Getting Started

Introduction
Symbol used in this manual
1
,,Note
Getting Started

Indicates special notes and operating features.

>>Caution
Indicates cautions for preventing possible damages
from abuse.
 Getting Started 7

Front panel

Getting Started
A Microphone
1 (Standby)
-- Switches the unit ON or OFF.
F (Function)
-- Select the function and input source by pressing F repeatedly.

Input source / Function Display

Wi-Fi WI-FI
Bluetooth BT
Optical
ARC OPT/HDMI ARC
LG Sound Sync (Wired)
HDMI IN 1 HDMI1
HDMI IN 2 HDMI2
B
USB USB

, You can use Bluetooth function after making Wi-Fi network connection by using Google Home
app.
o/p (Volume)
-- Adjusts volume level.
N
-- Starts playback. / Pauses playback.
>(Mic mute)
-- Disables the detect voice recognition by pressing >. All the Google Assistant LED turns amber and
“The mic is muted.” is heard.
To cancel it, press >again. Google Assistant LED turns off and “The mic is back on.” is heard.

-- Enables Google Assistant to receive your voice commands.

To cancel it, press again. (Page 35)
 8 Getting Started

C Remote sensor
Google Assistant LED
-- Changes LED status according to Google Assistant performance.
1
LED Status Description
Getting Started

All four LEDs are on. Ready to listen to your voice

D command.
All four LEDs blink. Responds to your voice command.

Microphone is off and the solid Voice recognition is disable

amber LED will be on.

Display Window
E -- Display window will be darkened automatically if there is no key input for 15 seconds.
When you press any button, the display window will brighten.
Precautions in using the touch buttons
yy Use the touch buttons with clean and dry hands.
-- In a humid environment, wipe out any moisture on the touch buttons before using.

. yy Do not press the touch buttons hard to make it work.

-- If you apply too much strength, it can damage the sensor of the touch buttons.
yy Touch the button that you want to work in order to operate the function correctly.
yy Be careful not to have any conductive material such as metallic object on the touch buttons. It can
cause malfunctions.
This unit will turn itself off to save electric consumption when the main unit is not connected to an
external device and is not used for 15 minutes.
Remove foreign materials between the grill and the case by using a cotton swab.
,
 Getting Started 9

Rear panel

Getting Started
USB Port
A -- Connect USB memory device to the USB port on the back of the unit.
OPTICAL IN
B -- Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV.
HDMI OUT (TV ARC)
C -- Connect the HDMI OUT (TV ARC) jack on the back of the unit to ARC jack on the TV.
HDMI IN (1)/HDMI IN (2)
D -- Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the external device.
You can enjoy the sound and picture from HDMI connection on an external device.
 10 Getting Started

Remote control

1 Replacement of Battery
Remove the battery cover on the rear of the remote
Getting Started

control, and insert the battery with 4 and 5

matched correctly.

1 (Standby)
-- Switches the unit ON or OFF.
a yy Networked standby: It allows the unit to switch to standby mode.
To turn on Networked standby function, Press 1.
To turn off Networked standby function, press 1 for about 3 seconds.
VOL (Volume) o/p
b
-- Adjusts speaker volume.
 Getting Started 11

SOUND EFFECT
-- Selects a sound effect mode by using SOUND EFFECT.

On Display Description
1
Analyzes the property of the input sound and provides the
ASC (Adaptive Sound Control)

Getting Started
sound optimized for the content in real time.
BASS BLAST or BASS BLAST+ Reinforces the bass and powerful sound.
STANDARD You can enjoy premium sound with MERIDIAN technology.
MOVIE You can enjoy more immersive and cinematic surround sound.

c MUSIC You can enjoy more good sound for music source.
, When this unit detects DOLBY ATMOS or DTS:X stream, you cannot change sound effect to any
other. In this case, even though you press SOUND EFFECT, this unit does not respond. And you can
see only “NOT SUPPORTED” on the display window.
yy TV remote: It allows you to control the volume of this unit by your TV remote control even by other
company’s product. (Page 44)
To turn on or off the TV Remote function, press and hold SOUND EFFECT for about 3 seconds and
press it again.
, Supported TV brands
LG Panasonic Philips Samsung Sharp Sony Toshiba Vizio

C/V (Skip)
d
-- Press C or V to go to next or previous file.
N (Play/Pause)
e
-- Starts playback. / Pauses playback.
(Sound tuning)
-- Adjusts sound level of each speaker.
Select the speaker you want to adjust by using and adjust the sound level by using VOL o/p.
, Adjusting rear speakers level is applied only when the rear speakers are connected.
Speaker Display Range
Sub Woofer WF -15 ~ 6
Center C -6 ~ 6
f
Overhead Volume Control OVC -6 ~ 6
Side S -6 ~ 6
Rear R -6 ~ 6
Treble TRE -5 ~ 5
Bass BAS -5 ~ 5

yy Surround sound: It allows you to enjoy surround sound with rear speakers. (Page 21)
To turn on or off the surround sound, press and hold for about 3 seconds and press it again.
 12 Getting Started

8 (Night time)
-- It is useful when you want to watch movies at low volume late at night. It makes to reduce the
g
sound intensity and improve fineness and softness.
Press 8 to activate Night time mode. To cancel it, press 8 again.
1
F (Function)
Getting Started

h
-- Select the function and input source by pressing F repeatedly.
[ (Mute)
i
-- Press [ to mute your unit. To cancel it, press [ again.

-- Enables Google Assistant to receive your voice commands while watching TV (not necessary when
j
listening to music through Wi-Fi or Bluetooth, you can just say “Hey Google”).
To cancel it, press again. (Page 35)
>(Mic mute)
-- Disables the detect voice recognition by pressing >. All the Google Assistant LED turns amber and
k “The mic is muted.” is heard.
To cancel it, press >again. Google Assistant LED turns off and “The mic is back on.” is heard.
J (Information)
-- You can display various information of the input source by pressing J.
-- Wi-Fi: Connected Application name
-- BT (Bluetooth): Connected Bluetooth device name
l -- OPT (Optical)/ARC/HDMI1/HDMI2 (HDMI IN 1/HDMI IN 2): Audio format
-- USB: File information contained on a USB.
yy Auto Power ON/OFF: It allows the unit to turn on and off automatically by input signals: Optical
(Page 44)
To turn on or off AUTO POWER function, press and hold J for about 3 seconds and press it again.
REPEAT
m
-- Press REPEAT to select desired repeat or random mode.
FOLDER W/S
n
-- Searches a folder on USB device.
 Getting Started 13

Installing the sound bar

You can hear the sound by connecting the unit to the
other device: TV, Blu-ray disc player, DVD player, etc. 1
Place the unit in front of the TV and connect it to the

Getting Started
device you want. (Pages 25 - 31)
You can place the wireless subwoofer anywhere in
your room. But it is better to place the subwoofer
near the main unit. Turn it slightly toward the center
of the room to reduce the wall reflections.
For the best surround sound, place the speakers as
shown below.

,,Note
yy The illustration above may differ from actual
units.
yy You can enjoy surround sound by using
Wireless Rear Speaker kit. Wireless Rear
Speakers Kit sold separately (SPK8-S).

>>Caution
yy For best performance of wireless connection
such as Bluetooth or wireless subwoofer,
do not install the unit on Metallic furniture
because wireless connection communicates
through a module positioned on the bottom
of the unit.
yy Be careful not to make scratches on the
surface of the Unit /Subwoofer when
installing or moving them.
 14 Getting Started

Mounting the main unit 1. Match the TV’s BOTTOM EDGE of Wall bracket
install guide with the bottom of TV and attach to
on a wall the position.

1
You can mount the main unit on a wall.
Getting Started

2. When you mount it on a wall (concrete), use the

wall plugs. You should drill some holes. A guide
sheet (Wall bracket install guide) is supplied to
drill. Use the sheet to check the point to drill.

>>Caution
Because it is difficult to make a connection after
installing this unit, you should connect the cables
before installation.

Preparation materials
Unit

3. Remove the Wall bracket install guide.

4. Fix the brackets with screws (A) as shown in the
Wall bracket install guide
illustration below.

Wall bracket

Screws
(Not supplied)
Screws (A)

Wall plug

,,Note
Screws (A) and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting.
 Getting Started 15

5. Put the unit on the brackets to match screw

holes on the bottom of the unit.

Getting Started
6. Fix the unit with the screws firmly.

,,Note
To detach the unit, perform it in reverse order.

>>Caution
yy Do not install this unit upside down. It can
damage the parts of this unit or be the cause
of personal injury.
yy Do not hang onto the installed unit and avoid
any impact to the unit.
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
 16 Connecting

Network connection Installing “Google Home” App

The “Google Home” app allows you to use various
You can enjoy various functions of this sound bar by functions of this speaker through your smart device.
connecting to network and your smart device with
“Google Home” app. Requirements before setup
yy A wireless router must be connected to the
internet. A smart device such as Android or iOS
devices must be connected to the wireless router
via Wi-Fi connection.
2
yy It needs Google account to use this app. During
connect Wi-Fi, this app may request to create
Connecting

Modem Google account.

Media Server
Through “Google Play” or “App Store”
1. Tap the“Google Play Store” icon or “App Store”
icon on your smart device.
2. Type in “Google Home” in the search bar and tap
Router
“Search” on “Google Play” or “App Store”
3. Select “Google Home” in the search result list to
download.

Google Home

The “Google Home” app is required to connect the

sound bar wirelessly to the network. ,,Note
yy Depending on the device version, “Google
,,Note Home” app may not work.
In a network environment (Router, Internet
yy For more information, visit the web site.
and Internet Service Provider) that supports
https://www.google.com/cast/setup/
both IPv4 and IPv6, the network automatically
connects to IPv4 or IPv6 when connecting to
the network.
You can check the each network status
by selecting the settings of My Speakers
([Settings]>[IP Info.]) on the “LG Wi-Fi Speaker”
app.
 Connecting 17

Launch the app to connect Wi-Fi 3. When the speaker is properly connected to Wi-Fi,
“CONNECTED” will appear on the display window
Make sure your smart device Wi-Fi feature is turned with sound.
on. Once a connecting operation is performed, it does
not need to be performed again. ,,Note
yy Depending on wireless router status, it might
,,Note not work well Wi-Fi connection.
In case of iOS devices, it should be turned on
yy It is recommended that you use Wi-Fi Group
Bluetooth setting on your smart device. Play with less than 5 speakers.
yy “Google Home” app is provided by Google. It 2
1. Tap the “Google Home” icon to launch the app. might be revised by a change of Google Policy.

Connecting
yy For more information (Set up, Usage, Help
etc.), research “Google Assistant Help” or
visit the web site. http://support.google.com/
assistant
yy The speaker is not available for use on some
functions from the “Google Assistant Help”
site. (ex. Call etc.) (Page 37)

2. Follow the screen on app to set speaker. Follow

these instructions in order.

,,Note
yy Use the same Wi-Fi connection to set the
speaker and your smart device.
yy If the Bluetooth setting turned on your
smart device, it will be easy to connect Wi-Fi.
yy During installation, you should create a
speaker name. It is needed when pairing the
Bluetooth device. You can check and edit
the speaker name. Follow the “Edit speaker
name”. (Page 43)
yy For more information on the setup, visit
the web site. https://support.google.com/
assistant/answer/7538816
 18 Connecting

Organizing cables Wireless subwoofer

You can organize the cable with cable ties.
and rear speaker (Sold
1. Hold the cables together with cable ties as shown Separately) connection
below.
2. Tighten cable ties.
Wireless subwoofer connection
2 LED indicator of wireless subwoofer
Connecting

LED Color Status

Green The connection is trying.

(Blink)
Green The connection is completed.

,,Note Red The wireless subwoofer is in

standby mode or the connection
After all connections are completed, you can
is failed.
arrange cables as needed.
Off (No The power cord of wireless
display) subwoofer is disconnected.

Setting up the wireless subwoofer for

the first time
1. Connect the power cord of the sound bar and the
wireless subwoofer to the outlet.
2. Turn on the sound bar. The sound bar and
the wireless subwoofer will be automatically
connected.
-- Pairing is completed. The green LED on the rear
of the wireless subwoofer turns on.
 Connecting 19

Manually pairing wireless subwoofer ,,Note

When your connection is not completed, you can yy It takes a few seconds (and may take longer)
check red LED on the wireless subwoofer and the for the main unit and the subwoofer to
wireless subwoofer does not make sound. To solve communicate with each other and make
the problem, follow the steps below. sounds.
yy The closer the main unit and the subwoofer,
1. Press Pairing on the rear of the wireless the better sound quality. It is recommended
subwoofer. to install the main unit and the subwoofer as
close as possible and avoid the cases below.
-- There is an obstacle between the main unit 2
and the subwoofer.

Connecting
Pairing -- There is a device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
-- The green LED on the rear of the wireless wireless LAN device.
subwoofer blinks quickly. -- Keep the sound bar and the subwoofer
(If the green LED does not blink, press and hold away from the device (ex. wireless router,
the Pairing.) microwave oven, etc.) over 1 m (3.3 ft) to
prevent wireless interference.
2. Turn on the sound bar.
-- Pairing is completed. The green LED on the rear
of the wireless subwoofer turns on.
!1 m
(3.3 ft)
 20 Connecting

Rear speakers connection (Sold >>Caution

Separately) yy Use the speaker supplied with this unit
only. Using any other speaker may cause
malfunction.
Connecting the rear speakers
yy Be sure to match the speaker cable to the
1. Connect the black stripe wire to the terminal appropriate terminal on the components: +
marked - (minus) and the other end to the to + and – to –. If the cables are reversed, the
terminal marked + (plus). sound will be distorted and will lack bass.

2
LED indicator of wireless receiver
Connecting

LED Color Status

Yellow - green The connection is trying.

(Blink)
Yellow - green The connection is completed.
Red The wireless receiver is in standby
mode or the connection is failed.
Off The power cord of wireless
(No display) receiver is disconnected.

Setting up the wireless receiver for the

first time
1. Connect the power cord to the wireless receiver
to the outlet.
2. Turn on the main unit: The sound bar and wireless
receiver will be automatically connected.
-- Yellow - green LED on the wireless receiver
turns on.
2. Connect the wireless receiver and the rear
speakers (right, left) with the speaker cables.

Color Position
Grey Rear right
Blue Rear left

,,Note
You need to purchase the wireless rear speakers
kit (SPK8-S) to enjoy surround sound.
 Connecting 21

Manually pairing wireless receiver Surround sound

When your connection is not completed, you can You can enjoy magnificent surround sound for all the
see the red LED on the wireless receiver and rear input sound source with rear speakers.
speakers do not make sound. To solve the problem,
If you turn on the surround function, the whole
follow the below steps.
speaker outputs sound.
1. Press PAIRING on the rear of the wireless When you turn off the surround function, the
receiver. speakers output sound as an original input sound
channel.
To turn on surround function, press and hold on
the remote control for about 3 seconds and press it
2
once again while “OFF - SURROUND” is scrolled.

Connecting
To turn off surround function, press and hold on
the remote control for about 3 seconds and press it
once again while “ON - SURROUND” is scrolled.

-- The yellow - green LED on the wireless receiver

blinks quickly.
2. Turn on the main unit
-- Paring is completed. The yellow - green LED on
the wireless receiver turns on.
 22 Connecting

Surround function ON

Output
Sound Effect Input
No rear speakers Rear speakers connected

2.0 Ch

ASC 5.1 Ch
2
Connecting

7.1 Ch or more

2.0 Ch
BASS BLAST
or 5.1 Ch
BASS BLAST+
7.1 Ch or more

2.0 Ch

STANDARD 5.1 Ch

7.1 Ch or more

2.0 Ch

MOVIE 5.1 Ch

7.1 Ch or more

2.0 Ch

MUSIC 5.1 Ch

7.1 Ch or more
 Connecting 23

Surround function OFF

Output
Sound Effect Input
No rear speakers Rear speakers connected

2.0 Ch

DTS
2
ASC 5.1 Ch Dolby

Connecting
Others

7.1 Ch or more

2.0 Ch
BASS BLAST
or 5.1 Ch
BASS BLAST+
7.1 Ch or more

2.0 Ch

DTS

STANDARD 5.1 Ch Dolby

Others

7.1 Ch or more

2.0 Ch

MOVIE 5.1 Ch

7.1 Ch or more

2.0 Ch

DTS

MUSIC 5.1 Ch Dolby

Others

7.1 Ch or more
 24 Connecting

How to Affix the Ferrite Core ,,Note

yy If there is a strong electromagnetic wave
Ferrite core may not be provided depending on each product nearby, interference may occur. Put
nation’s regulations. the main unit and wireless receiver away from
there.
Affix the Ferrite Core for speaker
yy The wireless receiver will automatically switch
cables to standby mode in a few minutes after the
You must affix a ferrite core in order to reduce or sound bar is turned off.
eliminate electrical interference. When the wireless receiver is in standby
mode, the LED will turn on in red.
2 1. Pull the stopper [a] of the ferrite core to open.
yy When you turn on the sound bar, the wireless
2. Wind the speaker cables around the ferrite core
Connecting

receiver will turn on and the LED will change

twice. to yellow - green and then the rear speakers
3. Close the ferrite core until it clicks. makes sound within a few seconds.
yy It takes a few seconds (and may take longer)
for the main unit and Wireless Receiver to
communicate with each other.
yy Use the rear speaker at least 30 cm
(11.8 inch) away from either TV screen or PC
monitor.
yy When the wireless receiver is being
connected or disconnected with the main
unit, output sound is maybe interrupted.
yy Set the distance between the sound bar and
the wireless receiver as close as possible and
keep them away from the device (ex. wireless
router, microwave oven, etc.) over 1 m (3.3 ft)
to prevent wireless interference.

!1 m
(3.3 ft)
 Connecting 25

Connecting to your TV LG Sound Sync

Please connect with this unit and TV using the optical

digital cable or HDMI cable considering the state of
the TV. You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
Using an OPTICAL cable compatible with the LG TV that supports LG Sound
Sync. Make sure of the LG Sound Sync logo is on your
1. Connect the OPTICAL IN jack on the back of the TV.
unit to OPTICAL OUT jack on the TV using an 2
Controllable function by LG TV’s remote control:
OPTICAL cable. Volume up/down, mute

Connecting
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
Make one of the following connections, depending on
the capabilities of your equipment.

Optical cable ,,Note

yy You can also use the remote control of this
unit while using LG Sound Sync. If you use TV’s
remote control again, the unit synchronizes
with the TV.
According to TV Specifications, the volume
and mute of this unit synchronize with TV.
2. Select the input source to OPT/HDMI ARC by
pressing F repeatedly. yy When the connection fails, make sure of the
condition of the TV and power.
You can see “OPT” on the display window if
connecting normally between this unit and your yy Make sure of the condition of this unit and
TV. the connection in the cases below when using
LG Sound Sync.
,,Note -- The unit is turned off.
yy Before connecting the optical cable, be sure
to remove the protection plug cover if your -- Changing to another function.
cable has the cover. -- Disconnecting the optical cable.
yy You can enjoy the TV audio through the yy The amount of time to turn off this unit is
speakers of this unit. In the case of some TV different depending on your TV when you set
models, you must select the external speaker AUTO POWER function to ON.
option from the TV menu. (For details,
reference your TV user manual.)
yy Set up the sound output of TV to listen to
the sound through this unit:
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
yy If this unit is connected by OPTICAL and ARC
at the same time, the ARC signal is a high
priority.
 26 Connecting

LG Sound Sync with wired connection

1. Connect your LG TV to the unit by using an
optical cable.

2 Optical cable
Connecting

2. Set up the sound output of TV to listen to the

sound through this unit:
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Optical)]
3. Turn on the unit by pressing 1.
4. Select the input source to OPT/HDMI ARC by
pressing F repeatedly.
You can see “LGOPT” on the display window if
connecting normally between this unit and your
TV.

,,Note
Details of TV setting menu vary depending on
the models of your TV.
 Connecting 27

Using an HDMI cable ARC (Audio Return Channel)

If you connect this unit to a TV that supports HDMI function
CEC and ARC (Audio Return Channel), you can
The ARC function enables an HDMI capable TV to
enjoy the TV audio through the speakers of this unit
send the audio stream to HDMI OUT of the unit.
without connecting the optical cable.
To use this function:
1. Connect the HDMI OUT (TV ARC) jack on the
-- Your TV must support the HDMI-CEC and ARC
back of the unit to ARC jack on the TV using an
function and the HDMI-CEC and ARC must be set
HDMI cable.
to On.
-- The setting method of HDMI-CEC and ARC may 2
differ depending on the TV. For details about ARC

Connecting
function, refer to your TV manual.
-- You must use the HDMI cable (Type A, High Speed
HDMI cable HDMI™ cable with Ethernet).
-- You must connect the HDMI OUT on the unit with
HDMI IN of the TV that supports ARC function
using an HDMI cable.
-- You can connect only one Sound bar to TV
compatible with ARC.
2. Select the input source to OPT/HDMI ARC by
pressing F repeatedly.
You can see “ARC” on the display window if
What is SIMPLINK?
connecting normally between this unit and your
TV.

,,Note
yy You can enjoy the TV audio through the Some functions of this unit are controlled by the
speakers of this unit. In the case of some TV TV’s remote control when this unit and LG TV’s with
models, you must select the external speaker SIMPLINK are connected through HDMI connection.
option from the TV menu. (For details,
reference your TV user manual.) Controllable functions by LG TV’s remote control:
Power on/off, volume up/down, etc.
yy Set up the sound output of TV to listen to
the sound through this unit: Refer to the TV owner’s manual for the details of
TV setting menu [ [Sound] [ [TV Sound SIMPLINK function.
output] [ [External speaker (HDMI ARC)] LG TV’s with SIMPLINK function has the logo as
shown above.
yy Details of TV setting menu vary depending on
the manufacturers or models of your TV.
yy Depending on your LG TV model, you may
,,Note
yy Depending on the state of the unit, some
need to turn on the SIMPLINK function on SIMPLINK operation may differ from your
your LG TV. purpose or not work.
yy When you return to ARC function from yy Depending on a TV or a player which is
another function, you need to select the input connected with this unit, SIMPLINK operation
source to OPT/HDMI ARC. Then this unit may differ from your purpose.
changes to ARC function automatically.
 28 Connecting

Additional information for HDMI HDMI cable Checklist

yy When you connect an HDMI or DVI compatible Some HDMI cables have poor signal transmission,
device make sure of the following: which can cause problems with sound and video
transmission.
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device and Even after HDMI cable connections, if no sound,
leave it for around 30 seconds, then switch on sound interrupted, noise occurring from the sound
this player. bar and/or no video, no smooth video on your TV, the
HDMI cable may be the problem.
- The connected device’s video input is set
correctly for this unit. Use the cable marked with the premium HDMI
2 certification logo. Also make sure that the your
- The connected device is compatible with
using cable is a certified Type A, Ethernet high-speed
Connecting

720 x 576p (or 480p), 1280 x 720p,

HDMI™ cable.
1920 x 1080i, 1920 x 1080p, 4096 x 2160p
or 3080 x 2160p video input.
STANDARD HDMI CABLE WITH ETHERNET
(X)
yy Not all HDCP-compatible HDMI or DVI devices will
work with this player. HIGH SPEED HDMI CABLE
(X)
- The picture will not be displayed properly with
(O)
non-HDCP device. HIGH SPEED HDMI CABLE WITH ETHERNET

,,Note Connection through HDMI Cable*

yy If a connected HDMI device does not accept
the audio output of the player, the HDMI Your television must support the newest HDMI
device’s audio sound may be distorted or may features (HDMI CEC1) / ARC (Audio Return Channel))
not output. to fully enjoy the Live broadcasting channel with
yy Changing the resolution when the connection audio system through an HDMI cable. Unless your
has already been established may result in TV supports these HDMI features, the audio system
malfunctions. To solve the problem, turn off should be connected through an OPTICAL cable.
the player and then turn it on again. 1) HDMI CEC (High-Definition Multimedia Interface
yy When the HDMI connection with HDCP is not Consumer Electronics Control)
verified, TV screen is changed to black screen. Consumer Electronics Control (CEC) is an HDMI
In this case, check the HDMI connection, or feature designed to allow the user to command and
disconnect the HDMI cable. control the CEC-enabled devices, that are connected
yy If there are noises or lines on the screen, through HDMI by using only one of their remote
please check the HDMI cable (length is controls.
generally limited to 4.5 m (15 ft). * Trade names for CEC are SimpLink (LG) , Anynet+
yy You cannot change the video resolution in (Samsung), BRAVIA Sync (Sony), EasyLink (Philips),
the HDMI1/HDMI2 mode. Change the video etc.
resolution of the connected component.
yy If the video output signal is abnormal when
your personal computer is connected to HDMI
IN jack, change the resolution of your personal
computer to 576p (or 480p), 720p, 1080i or
1080p.
 Connecting 29

Optional equipment
connection

DOLBY ATMOS®
What is DOLBY ATMOS®?
Dolby Atmos gives you amazing experience you’ve 2
never before by overhead sound, and all the richness,

Connecting
clarity, and power of Dolby sound.

DTS:X™
What is DTS:X™
In the real world, sound is all around us, moving freely
in any direction. DTS:X™ is immersed in this natural,
multi-dimensional sound experience as we go about 1. Connect HDMI IN (1) or HDMI IN (2) jack on the
our daily lives. back of the unit to HDMI OUT jack on the external
device such as Blu-ray disc player, DVD player, etc.
For using DOLBY ATMOS® and DTS:X™ 2. Connect HDMI OUT (TV ARC) jack on the back of
yy DOLBY ATMOS® is available only in HDMI1/HDMI2 the unit to HDMI IN (ARC) jack on the TV.
and ARC mode. 3. Select the input source to HDMI1, HDMI2 or OPT/
-- To use DOLBY ATMOS® in ARC mode, your TV HDMI ARC by pressing F repeatedly.
has to support DOLBY ATMOS®. -- If you select HDMI1 or HDMI2, you can hear the
yy DTS:X™ is available only in HDMI1/HDMI2 mode sound from the external device. Select it when
playing the external device.
yy It is needed to set up an audio output on external
devices (Blu-ray disc player, TV etc.) to “No -- If you select OPT/HDMI ARC, you can hear the
encoding” such as “Bitstream”, “Auto” or “Bypass”. sound from your TV. Select it when watching
the TV.
-- If you can select audio output sampling rate, set
it to 192 kHz. You can see “DOLBY ATMOS” or “DTS:X” on the
display window if connecting normally between
this sound bar and your TV and the contents is
played.

,,Note
yy DOLBY ATMOS®/DTS:X™ supports 5.1.2
channel. (7.1.2 channel when it connected
with Rear kit)
yy If the sound bar does not have sound or the
video on TV is not smooth, the HDMI cable
may be the problem. Refer to the HDMI cable
checklist. (Page 28)
 30 Connecting

HDMI IN connection OPTICAL IN connection

You can enjoy the sound from the external device Connect an optical output jack of external devices to
which is connected to HDMI IN (1) or HDMI IN (2) the OPTICAL IN jack.
jack on this unit.

2 Optical cable
Connecting

To the optical output

jack of external device

1. Connect the OPTICAL IN jack on the back of the

unit to optical out jack of your external device.
2. Select the input source to OPT/HDMI ARC by
To the Blu-ray disc player, pressing F repeatedly.
DVD player, etc. You can see “OPT” on the display window if
1. Connect HDMI IN (1) or HDMI IN (2) jack on the connecting normally between this unit and your
back of the unit to HDMI OUT jack on the audio device.
device such as Blu-ray disc player, DVD player, etc. ,,Note
2. Select the input source to HDMI1 or HDMI2 by Before connecting the optical cable, be sure to
pressing F repeatedly. remove the protection plug cover if your cable
has the cover.
 Connecting 31

Optional equipment connection USB connection

You can enjoy both sound and picture from the Connect USB memory device to the USB port on the
external device you connect. back of the unit.

Connecting
,,Note
OR It is recommended that you purchase a USB
gender separately for the convenience of USB
insertion and extraction. (Recommended USB
gender type: USB 2.0 extension cable)

For more information of playing files on a USB, refer

1. Connect HDMI IN jack of your TV to HDMI OUT to the page 34.
jack on the external device such as Blu-ray disc
player, DVD player, etc. Removing the USB Device from the unit
2. Connect the OPTICAL IN jack on the back of the 1. Choose a different function/mode.
unit to OPTICAL OUT jack on the TV using an 2. Remove the USB device from the unit.
OPTICAL cable.
Or connect the HDMI OUT (TV ARC) jack on the Compatible USB devices
back of the unit to HDMI IN (ARC) jack on the TV yy MP3 Player: Flash type MP3 player.
using an HDMI cable.
yy USB Flash Drive: Devices that support USB 2.0.
3. Select the input source to OPT/HDMI ARC by
yy The USB function of this unit does not support
pressing F repeatedly.
some USB devices.
,,Note
If the sound bar does not have sound or the
video on TV is not smooth, the HDMI cable
may be the problem. Refer to the HDMI cable
checklist. (Page 28)
 32 Connecting

USB device requirement Playable file

yy Devices which require additional program Sampling Frequency
installation connected to a computer, are not
MP3: within 32 to 48 kHz
supported.
OGG: within 32 to 48 kHz
yy Do not extract the USB device while in operation. AAC: within 8 to 48 kHz
yy For a large capacity USB, it may take longer than a
few minutes to be searched. Bitrate resolution
yy To prevent data loss, back up all data. MP3: within 8 to 320 kbps
2 yy The unit’s USB Port cannot be connected to PC. OGG: within 64 to 320 kbps
The unit can not be used as a storage device. AAC: within 8 to 320 kbps
Connecting

yy The exFAT/NTFS file systems are not supported

yy Maximum files: Up to 2,000
on this unit. (FAT16/FAT32 systems are available.)
yy Maximum directories: Up to 200
yy Depending on some devices, it may not available to
recognize the followings on this unit. yy A protected file by DRM (Digital rights
management) cannot be played on the unit.
-- External HDD
yy Video files in the USB storage device can not be
-- Card readers
played.
-- Locked devices
yy Depending on the performance of your USB
-- Hard type USB devices device, playback may not work well.
-- USB hub
-- Using USB extension cable
-- iPhone/iPod/iPad
-- Android device
 Connecting 33

,,Note
yy Folders and files on the USB are recognized
as below.
: Folder
: File

a C

D
2
E

Connecting
b F
G
c H
I

d J
A
B

yy If there is no file in a folder, the folder will not

appear.
yy File will be played from file $A to file $J
one by one.
yy Files will be played in order recorded and it
may be different depending on the record
circumstances.
yy This unit can display file or folder names that
contain numbers or English characters only.
yy *ROOT: The first screen you can see when a
this unit recognize the USB is “ROOT”.
 34 Operating

USB operation ,,Note

yy The resume point may be cleared when you
pull out the power cord or removing the USB
1. Connect the USB device to the USB port. device from the unit.
2. Select the USB function by pressing F repeatedly. yy Repeat/Random playback operates as follows.

To Do this On Display Description

Playback Press N. OFF Plays songs on USB device
in order.
Pause During playback, press N.
ONE Plays a same song
During playback, press V on
repeatedly.
the remote control to go to the
next file. FOLDER Plays songs in a folder
Playing less than 3 seconds, repeatedly.
3 Skip to the next/ press C on the remote ALL Plays all the songs on USB
previous file control to go to the previous device repeatedly.
Operating

file.
Playing after 3 seconds, press SHUFFLE Plays all the songs once
C on the remote control to randomly, and stops the
go to the beginning of the file. playback.

Press REPEAT on the remote

Play repeatedly control repeatedly. Refer to
or randomly the note for details about the
display change.

Press FOLDER W/S on the

Search a folder
remote control.
 Operating 35

How to use the Google 3. Just say the thing you want to do. Then the
speaker recognizes and performs your voice
Assistant command.
4. After a few seconds, the Google Assistant will
respond to your command.

Talk to the Google Assistant ,,Note

yy The Google Assistant only responds to voice
You can use a variety of voice commands to control commands when you are using Wi-Fi or BT
this speaker with the Google Assistant. Try to say (Bluetooth) as the input.
a voice command to the speaker. The speaker will If you are using HDMI, Optical, ARC, Optical
activate the Google assistant and perform your voice Sound Sync, or USB input, then you must
command. use the button to activate the Google
Assistant.
yy Each time you use voice recognition, say “Hey
Hey Google.
Set the alarm at 4 PM.
Google” or press . 3

Operating
Comfortable Function
There, your alarm
With the Google Assistant built in, you can control
is set for 4 PM.
compatible smart home devices such as TV’s, lights,
switches, plugs, thermostats and more by simply
using your voice.

1. Turn on the speaker and connect Wi-Fi. (Page

17)
2. Say “Hey Google” or press .
Then the speaker is activated and ready to receive
your voice commands.

Hey
Google.

Or

72

For more information, visit the below web site.

yy Set up, Usage and more: http://support.google.
com/assistant/answer/7540703
yy Compatible LG appliance models:
Visit http://www.lg.com and then search the
information
 36 Operating

Voice command ,,Note

yy After connecting to Wi-Fi, this function is
1. Time available to use. If Google Assistant LED
“What time is it?”, “What time is it now?”, “What (White) blinks, the speaker is not connected
time is it in Spain?” to Wi-Fi. Follow the “Installing “Google Home”
2. Weather App” and try again. (Page 16)
“What’s the weather?”, “What’s the weather this yy If the Google Assistant LED is solid amber,
weekend?”, “What’s the weather in Paris?”, “Will it the microphone is off. In that case, the Google
rain tomorrow?” Assistant is not available to receive your
3. Plan comment. Press >.
“Tell me about my day.”, “What’s my next yy If the Google Assistant fails to understand
meeting?”, “Set a reminder to check schedule at your commands, it will say answers such
6pm.” as “Sorry, I can't help with that yet”, “My
4. Alarms apologies. I don't understand.”
“Set an alarm” , “Set an alarm for 9am”, “Wake me yy Avoid noisy places, because the speaker may
3 up at 9am”, “What alarms are set?” not receive your commands or “Hey Google”.
5. Music Instead of “Hey Google”, press .
Operating

“Play the music.”, “Next song.”, “Previous song.”,

yy When the voice recognition time limit is
“Pause the music” exceeded on smart devices, this function
6. Volume automatically cancels.
“Volume level 3.”, “Maximum volume.”, “Mute.”, “Turn
yy Speaking with correct pronunciation will
it up”, “Turn it down” increase the voice recognition rate.
7. Smart Home devices
yy The Google Assistant may be slow to
“Set the heat to 70” recognize or act depending on the Wi-Fi
“Turn on lights in the kitchen” connection status or Google server status.
“Watch on TV”
yy If you have any trouble or question about
,,Note Google Assistant, please suggest by saying
yy For more information on the voice commands, “Hey Google, Feedback”. It would be helpful
refer to the “Google Home” app screen or for improving Google Services.
visit the web site. http://support.google.com/
assistant
yy Voice command of Volume level change
-- The volume range of this unit is 1-40.
(Except LGOPT function. In LGOPT function,
the volume range works 1-100.)
-- Google Assistant recognizes voice
command of volume level change as a scale
(1-10) or a percentage (1-100 %)
-- For example, if you say “Volume level five.”
the volume level of this unit changes to 20.
If you say “Volume to 65 %.”, it changes to
26.
-- Volume level increases or decreases by
10 % (i.e. 4) when you say, “volume up” or
“volume down”.
-- When you say numbers of 10 and less, it is
recommended to say “percent” to prevent
too loud sound.
 Operating 37

Reference site for Google Assistant Help

Set up the Google Assistant on your
https://support.google.com/assistant/answer/7538816
speakers

Listen to music https://support.google.com/assistant/answer/7539710

Play music on your TV or speakers https://support.google.com/assistant/answer/7539867

Play TV shows & movies https://support.google.com/assistant/answer/7539991

Control smart home devices https://support.google.com/assistant/answer/7540703

3
Create a shopping list https://support.google.com/assistant/answer/7540969

Operating
Buy items on your shopping list https://support.google.com/assistant/answer/7384588#speaker

Set up and manage My Day https://support.google.com/assistant/answer/7393908#speaker

Listen to radio https://support.google.com/assistant/answer/7540307

See which Google Account is linked

https://support.google.com/assistant/answer/7539992
to your Assistant

Control volume of your speakers https://support.google.com/assistant/answer/7538817

Change your language https://support.google.com/assistant/answer/7394513#speaker

 38 Operating

Control your TV and Available voice commands

Sound Bar with Voice LG TV
command Commands Action
Turn on LG TV
Turn LG TV on
Turns on your LG TV.
Power on LG TV
Power LG TV on
HDMI cable
Turn off LG TV
Turn LG TV off
Turns off your LG TV.
Power off LG TV
3 Power LG TV off
Operating

Channel up on LG TV
1. Connect your Sound Bar to Wi-Fi by using Google Your LG TV changes the
Home app. LG TV channel up
channel to up.
2. Connect your Sound Bar and TV by using an Next channel on LG TV
HDMI cable. Channel down on LG
3. Say a voice command. See the following tables. TV
Your LG TV changes the
,,Note LG TV channel down
channel to down.
yy You have to say voice commands in English. Previous channel on
LG TV
yy Available TV: Web OS version 4.5 or later TV
(LG TV models released after 2019 years)
Volume up on LG TV Volume of your LG TV
yy Available voice commands might be revised
LG TV volume up increases.
by a change of Google Policy.
yy Speaks the voice commands with accurate
Volume down on LG
and clear pronunciation. Volume of your LG TV
TV
decreases.
LG TV volume down
Mute LG TV Mutes your LG TV
LG TV unmute
Unmutes your LG TV
LG TV mute off
 Operating 39

Sound Bar

Commands Action
Turn off LG sound bar
Turns off your LG Sound Bar.
Power off LG sound bar
Wi-Fi network Changes to the Wi-Fi function.
BLUETOOTH Changes to the BT (Bluetooth) function.

Switch function to OPTICAL Changes to the Optical function.

Enable function HDMI ARC Changes to the HDMI ARC function.
Set function to HDMI 1 Changes to the HDMI1 function.
HDMI 2 Changes to the HDMI2 function. 3
USB Changes to the USB function.

Operating
STANDARD Changes the sound effect to STANDARD.
ASC Changes the sound effect to ASC.
MOVIE Changes the sound effect to MOVIE.
Set sound effect
MUSIC Changes the sound effect to MUSIC.
BASS BLAST (BASS Changes the sound effect to BASS BLAST (BASS BLAST
BLAST PLUS) PLUS).
Display the input source information Displays the input source information on display window.
Enable Auto volume Turns on Auto volume function.
Disable Auto volume Turns off Auto volume function.
Enable Auto Power Turns on Auto power function.
Disable Auto Power Turns off Auto power function.
Enable Night Time Turns on Night time mode.
Disable Night Time Turns off Night time mode.
Enable DRC Turns on DRC.
Disable DRC Turns off DRC.
Enable TV remote Turns on TV remote function.
Disable TV remote Turns off TV remote function.
Enable Surround Turns on Surround sound.
Disable Surround Turns off Surround sound.
Enable Neural X Turns on Neural X.
Disable Neural X Turns off Neural X.
 40 Operating

“LG Wi-Fi Speaker” Installing “LG Wi-Fi Speaker”

App
The “LG Wi-Fi Speaker”app is provided by LG
Electronics. This app allows you to use various Through Apple “App Store” or “Google
functions of this speaker through your smart device: Play Store”
Requirements before using 1. Tap the Apple “App Store” icon or “Google Play
Store” icon.
You should connect to Wi-Fi by using “Google Home”
app prior using this app. (Page 17) 2. Type in “LG Wi-Fi Speaker” in the search bar and
tap “Search”.
Enjoying music on your device and 3. Select “LG Wi-Fi Speaker” in the search result list
home network server to download.
You can listen to the music on your smart device and ,,Note
3 home network server. yy “LG Wi-Fi Speaker” app will be available in
version of the software as follow;
Using Chromecast built-in
Operating

Android OS: Ver 5.0 (or later)

You can enjoy music contents through this sound bar iOS: Ver 10 (or later)
with Chromecast enabled apps. yy Depending on the device, “LG Wi-Fi Speaker”
app may not work.
Setting and controlling the sound bar yy You can find the available application of this
You can manage the sound bar settings and control unit by using “LG Audio” app.
the sound bar even without remote control. Android OS: Ver 5.0 (or later)

Requirements
yy A wireless router must be connected to the
internet.
yy A smart device such as a smartphone or tablet
must be connected to the wireless router via Wi-
Fi connection.

,,Note
For more informations of “LG Wi-Fi Speaker”,
follow the instructions of the application.
 Operating 41

Using a Bluetooth Listening to Music of a

Bluetooth Device
Wireless Technology Before you start the pairing procedure, make sure
that the Bluetooth feature on your smart device
is turned on. Refer to your Bluetooth device’s user
About Bluetooth guide. Once a pairing operation is performed, it does
Bluetooth is wireless communication technology for not need to be performed again.
short range connection. 1. Turn on the speaker and connect Wi-Fi. Follow
The sound may be interrupted when the connection “Network connection”. (Page 16-17)
interfered by the other electronic wave or you 2. Select the Bluetooth function by pressing F
connect the Bluetooth in the other rooms. repeatedly.
Connecting individual devices under Bluetooth “BT” and then “READY” appears in the display
wireless technology does not incur any charges. A window.
mobile phone with Bluetooth wireless technology 3. Operate the Bluetooth device and perform 3
can be operated via the Cascade if the connection the pairing operation. When searching for this
was made via Bluetooth wireless technology.

Operating
speaker on your Bluetooth device, a list of the
yy Available Devices: Smart phone, MP3, Notebook, devices found may appear in the Bluetooth
etc. device display depending on the type of
yy Version: 5.0 Bluetooth device.
Your speaker appears as “Speaker name (App
yy Codec: SBC setup)”.
4. Select the “Speaker name (App setup)”.
Bluetooth profiles
In order to use Bluetooth wireless technology,
,,Note
yy Speaker name was setup on “Google
devices must be able to interpret certain profiles. This Home” app. For example, if the speaker
speaker is compatible with following profile. name is set to “Living Room” in the
A2DP (Advanced Audio Distribution Profile) “Google Home” app, you will see “Living
Room” on your Bluetooth device.
yy You may check and edit the speaker name
on “Google Home” app (Page 43)
yy Depending on the Bluetooth device type,
some devices have a different pairing way.
For details about Bluetooth pairing, refer
to your Bluetooth device manual.
 42 Operating

5. When this unit is successfully connected with ,,Note

your Bluetooth device, yy This unit supports Bluetooth auto pairing.
“PAIRED” [ your device’s name [ “BT” appears However it does not operate in the case
on the display window. below:
,,Note -- When you restart this unit.
yy If it is unavailable to display device name -- When you disconnect this unit by yourself.
on the unit, “-” will be displayed. -- When you disconnect this unit on the
yy To check the connected device’s name, connected Bluetooth device.
press J on the remote control. The yy The sound may be interrupted when the
connected Bluetooth device’s name is connection is interfered with by the some
displayed. other electronic wave.
yy Pairing is limited to “One” Bluetooth device.
6. Listen to music.
Multi-Pairing is not supported.
To play music in your Bluetooth device, refer to
yy Depending on the type of the device, you may
3 your Bluetooth device’s user guide.
not be able to use the Bluetooth function.
According to your Bluetooth device’s volume level,
yy You can enjoy using Bluetooth when using
Operating

the volume level of Bluetooth will be adjusted.

Phone, MP3, Notebook, etc..
,,Note yy The more distance between the unit and the
yy When using Bluetooth technology, you have Bluetooth device, the lower the sound quality
to make a connection between the unit and becomes.
the Bluetooth device as close as possible and
keep the distance. yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
However it may not work well in the case
device gets to far from the unit.
below:
-- There is an obstacle between the unit and yy If the Bluetooth connection is disconnected,
connect the Bluetooth device again.
the Bluetooth device.
-- There is a device using same frequency yy When a Bluetooth device is not connected,
“READY” appears on the display window.
with Bluetooth technology such as a
medical equipment, a microwave or a yy If you change to another function after
wireless LAN device. connecting Bluetooth device, Bluetooth
connection will be disconnected. When you
yy If last connected device is LG TV, this sound
return to Bluetooth function, Bluetooth
bar will connect to the TV automatically when
connection will be connected automatically.
you restart the sound bar.
yy When one Bluetooth device has connected
yy If the LG TV is turned off, this sound bar will
to this unit, another device cannot find and
enter “READY” (Bluetooth ready) mode.
connect to this unit. If you want to connect
When the TV is turned back on, the Sound
another device, disconnect the current device
Bar will not reconnect automatically. To
and try again.
connect the Sound Bar and the TV:
-- Say “Hey Google, connect Bluetooth”
-- Turn the Sound Bar off and back on.


Then follow the TV’s on screen instructions.
yy Available TV: LG TV models released after
2016 and some TVs may not work well.
 Operating 43

Using Voice command to connect

Bluetooth
If the speaker has paired to a Bluetooth device
before, you can use “Google Assistant” to connect
Bluetooth. Say “Connect”, “Connect to Bluetooth” or
“Hey Bluetooth”.
To disconnect it, say “Cancel”, “Unpair devices” or
“Clear all devices”.

Controls connected Bluetooth device

You can control the connected Bluetooth device
from the unit; play, pause, skip, volume.

,,Note
yy Only Android OS and iOS is available to use 3
this function.

Operating
yy This function may not be supported
depending on the Bluetooth device or some
of TV operated differently.
yy You can control connected Bluetooth devices
by voice recognition. Follow the “How to use
Google Assistant" (Page 35).

Edit speaker name

You can check and edit the speaker name on the
“Google Home” app.
 44 Operating

Other operations AUTO POWER On/Off

This sound bar automatically turns on and off by an
input source: Optical
Using your TV remote control To turn on this function, press and hold J on the
remote control for about 3 seconds and press it once
You can control some functions of this unit by your again while “OFF - AUTO POWER” is scrolled.
TV remote control even by other company’s product.
Controllable functions are volume up/down and To check the status of this function, press and hold
mute. J on the remote control.
Press and hold SOUND EFFECT on the remote To turn off this function, press and hold J on the
control for about 3 seconds. “ON - TV REMOTE” remote control for about 3 seconds and press it once
appears and you can control this unit by your TV again while “ON - AUTO POWER” is scrolled.
remote control.
Turning on
To check the status of this function, press and hold
3 SOUND EFFECT on the remote control. When you turn on your TV or an external device
connected to this unit, this unit recognizes the input
To turn off this function, press and hold SOUND
signal and selects the suitable function. You can hear
Operating

EFFECT on the remote control and press it once

the sound from your device.
again while “ON - TV REMOTE” is scrolled.

,,Note Turning off

yy Make sure that the sound output of your TV When the TV is off, this sound bar switches to the
is set to [External speaker]. Networked standby mode.
yy This function does not operate on LG TV’s
magic remote control. ,,Note
yy After the unit is turned on by AUTO POWER
yy This function may not work well when some function, it will be automatically turned off if
TV control functions such as HDMI CEC, there is no signal for a certain period of time
SIMPLINK and LG Sound Sync set to ON. from the TV connected by LG Sound Sync
yy Some remote control may not be supported. (Optical).
yy After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
yy If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER
function. However the unit can be turned on
by AUTO POWER function when optical signal
comes in after 5 seconds of no signal.
yy Depending on the connected device, this
function may not operate.
yy When you turn on this unit for the first time,
status of Auto Power function is turned on.
yy You can set the AUTO POWER function only
when this unit is turned on.
 Operating 45

Auto function change

This sound bar recognizes input signals such as
Optical, HDMI ARC, Bluetooth, and “LG Wi-Fi
Speaker” app and then changes suitable function
automatically.

When you turn on your TV or an

external device
When you turn on your TV or an external device
connected by the one among Optical, LG Sound Sync
(Optical), or HDMI ARC, this sound bar will change
to a suitable function so you can listen to the sound
through it.

When you try to connect a Bluetooth 3

device

Operating
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.

When you play music by “LG Wi-Fi

Speaker” app
When you play music by “LG Wi-Fi Speaker” app
on your smart device, this sound bar changes the
function to WI-FI and you can listen to the music
through it.

,,Note
This unit does not change the function to optical
if SIMPLINK of the connected TV, Bluray disc
player, set-top box or etc. device set to on or
connected CEC supported device is turned on.
If you want to use the auto function change, turn
off SIMPLINK function on your LG TV. It takes for
about 30 seconds to turn off SIMPLINK.
 46 Operating

Standby mode Reset the Speaker

The speaker switches to the standby mode if there is If the speaker doesn’t respond, reset the speaker.
no music playback or no button operation. Press and hold the > until you hear the beep sound
once. You can see “RESET” on the display window.
Standby mode Then all the stored wireless network information is
deleted.
If you press and hold 1 for about 3 seconds, the
speaker switches to the standby mode. Then “GOOD-
BYE” appears on the display window. And all wireless
network ports are deactivated.

Networked standby mode

3 Option 1.
When music is not played and buttons are not
Operating

pressed for 15 minutes, the speaker switches to

the Networked standby mode. Then “GOOD-BYE”
appears on the display window.

Option 2.
If you press 1, the speaker switches to the
Networked standby mode. Then “GOOD-BYE”
appears on the display window.
 Troubleshooting 47

Troubleshooting

General

Symptoms Cause & Solution

The unit does not work yy Turn off the power of this unit and the connected external device (TV, Woofer,
properly. DVD-player, Amplifier, etc.) and turn them on again.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
The power does not turn Is the power cord plugged into the outlet?
on. yy Connect the power plug to the outlet.
Sound is not produced. Is the volume set to minimum?
yy Adjust the volume.
yy When you are using connection with a external device (set top box, Bluetooth
device etc.), adjust volume level of the device. 4
Is the mute function activated?

Troubleshooting
yy Press [ or adjust the volume level to cancel the mute function.
Is the function selected properly?
yy Check the input source and select the correct input source.
No woofer sound Is the subwoofer plugged in?
yy Plug the power cord of subwoofer into the wall outlet securely.
Is pairing between the unit and the subwoofer disconnected?
yy Connect the unit and the subwoofer. (Page 18)
The remote control does Is the remote control too far from the unit?
not work properly. yy Operate the remote control within about 7 m (23 ft).
Is there an obstacle in the path of the remote control and the unit?
yy Remove the obstacle.
Are the batteries in the remote control exhausted?
yy Replace the batteries with new one.
The AUTO POWER yy Check connection of the external device such as TV, DVD/Blu-Ray player.
function does not work. yy Check the state of SIMPLINK on your LG TV and turn off SIMPLINK.
yy Depending on the connected device, this function may not operate.
LG Sound Sync does not yy Check whether your LG TV supports LG Sound Sync (Wired).
work. yy Check connection of LG Sound Sync (Wired).
yy Check sound setting of your TV and this unit.
 48 Troubleshooting

Symptoms Cause & Solution

When you feel the output Check the details below and adjust the unit according to them.
sound of the unit is low. yy Switch the state of DRC function to [OFF] by using “LG Wi-Fi Speaker”.
yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT
setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT
setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
yy Change Audio DRC setting on connected device setup menu to [OFF] state.
yy Make sure that Night Time mode is not On. Turn off Night Time mode.
USB is not recognized yy Format the USB device and connect it again.
When formatting the USB device, select file system as FAT16 or FAT32.
Bluetooth pairing does yy Be sure your Bluetooth device is on.
not work well. yy Switch Bluetooth off and on again on your Bluetooth device, then try pairing
again.
yy Remove the obstacle in the path of the Bluetooth device and the unit.
4 yy Depending on the type of the Bluetooth device or surrounding environment,
your device may not be paired with the unit.
Troubleshooting

The unit does not connect yy Make sure the speaker connects to Wi-Fi by using “Google Home” app.
with Bluetooth device.
Voice recognition does yy The speaker may not be recognized because of the surrounding noise.
not work well. yy Instead of “Hey Google”, press .
yy Check and make sure the microphone is muted. Press > button.
 Troubleshooting 49

Network

Symptoms Cause & Solution

Cannot connect the yy The wireless communication may be interrupted from household devices that
speaker to your home are using radio frequencies. Move the speaker away from them.
network. yy Check your router. Try turning it off and back on.
yy Check that the Wi-Fi feature is turned on in your smart device.
yy Check that the speaker and your smart device are connected to same Wi-Fi.
Wi-Fi connection does If you restart the router?
not work well. yy You need to turn the speaker’s power off and on again.
If you install new router.
yy You need to perform a factory set and setup the network connection for
speaker.

Application
4

Troubleshooting
Symptoms Cause & Solution
The application doesn’t Does an error occur when accessing the app?
work properly. yy Make sure that your smart device is compatible with the app.
yy Make sure that the application is the latest version.
yy Make sure that the connected unit turns on.
 50 Troubleshooting

NOTES to use wireless

Symptoms Cause & Solution

This device may have yy Wireless may not operate normally in weak signal area.
wireless interference. yy Please install the device close enough to wireless subwoofer.
yy Do not install the device on metal furniture for optimum performance.
Bluetooth device may yy When any part of your body contact the transceiver of the Bluetooth device
malfunction or make or sound bar.
noise in the following yy When there is an obstacle or wall or the device is installed in a secluded spot.
cases.
yy When there is a device (a wireless LAN, a medical equipment or a microwave)
using same frequency, make the distance between the products as far away
as possible each other.
yy When connecting the device to the Bluetooth device, make the distance
between the products as close as possible each other.
yy When the device gets too far from the Bluetooth device, the connection is
disconnected and also malfunction may occur.

4
Troubleshooting

NOTES to release Demo mode

Symptoms Cause & Solution

Can not change input source with F such as BT Unplug the power cord and plug it in again.
(Bluetooth), HDMI etc. and only [DEMO] indication If that doesn’t work, press and hold F (About 5 seconds)
is showing in the front display. on the main unit until the display indicates current
selected function.
Remote Control does not work. (No response)
 Appendix 51

File requirement
Available File extensions: “.mp3”, “.aac”, “.ogg”
Sampling Frequency:
MP3: within 32 to 48 kHz
OGG: within 32 to 48 kHz
AAC: within 8 to 48 kHz
For DTS patents, see http://patents.dts.com.
Bitrate resolution: Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
MP3: within 8 to 320 kbps together, DTS:X, and the DTS:X logo are registered
OGG: within 64 to 320 kbps trademarks or trademarks of DTS, Inc. in the
AAC: within 8 to 320 kbps United States and/or other countries. © DTS, Inc.
All Rights Reserved.
yy The file requirements are not always compatible.
There may have some restrictions by file features
and media server’s ability.
yy Some wav files are not supported on this speaker.
yy Depending on the types of file or ways of
recording, it may not play back.
yy Some DRM-loaded files are not supported on this The Bluetooth® word mark and logos are
speaker. registered trademarks owned by the Bluetooth
yy The types of supported files may differ depending SIG, Inc. and any use of such marks by LG
on the operating system and/or the manufacturer Electronics is under license.
of the smart device and PC. Other trademarks and trade names are those of 5
their respective owners.

Appendix
Trademarks and licenses
All other trademarks are trademarks of their
respective owners.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Atmos, and the double-D
symbol are Trademarks of dolby Laboratories.
 52 Appendix

Specifications

General
Power requirements Refer to the main label on the unit.
Power consumption Refer to the main label on the unit.
Approx. 1443.0 mm x 63.0 mm x 146.0 mm (with foot)
Dimensions (W x H x D)
(56.8 inch x 2.5 inch x 5.7 inch)
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 5 % to 90 %
Bus Power Supply (USB) 5 V 0 500 mA
Available Digital Input Audio
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 192 kHz
Sampling Frequency
Available Digital Input Audio format Dolby Atmos, Dolby Audio, DTS:X, DTS-HD, PCM

Input/Output
OPTICAL IN 3 V (p-p), Optical jack x 1
HDMI IN (1) / HDMI IN (2) 19 Pin (Type A, HDMI™ connector) x 2
19 Pin (Type A, HDMI™ connector) x 1
1080p, 1080i, 720p, 576p, 480p
5 HDMI OUT 2160p@24/25/30 Hz 4:4:4
2160p@60/50 Hz 4:2:0
Appendix

4K Sources dependent on HDCP 2.2 are supported at 4K resolutions.

Amplifier (RMS Output)

Total 570 W RMS
Front 50 W RMS x 2 (4 Ω at 1 kHz, THD 10 %)
Center 50 W RMS (4 Ω at 1 kHz, THD 10 %)
Surround 50 W RMS x 2 (4 Ω at 1 kHz, THD 10 %)
Top 50 W RMS x 2 (4 Ω at 1 kHz, THD 10 %)
Subwoofer 220 W RMS (3 Ω at 80 Hz, THD 10 %)
 Appendix 53

Wireless subwoofer
Power requirements Refer to the main label on the subwoofer.
Power consumption Refer to the main label on the subwoofer.
Type 1 Way 1 Speaker
Impedance 3Ω
Rated Input Power 220 W RMS
Max. Input Power 440 W RMS
Approx. 221.0 mm x 390.0 mm x 312.8 mm
Dimensions (W x H x D)
(8.7 inch x 15.4 inch x 12.3 inch)

System
Wireless LAN (Internal antenna) 802.11a/b/g/n Wi-Fi networks

SPK8-S (SPK8-S, S78S1-S), Sold Separately

Wireless receiver
Power requirements Refer to the main label on the wireless receiver.
Power consumption Refer to the main label on the wireless receiver.
Rear 70 W RMS x 2 (3 Ω at 1 kHz, THD 10 %)
Approx. 60.0 mm x 220.0 mm x 175.0 mm 5
Dimensions (W x H x D)
(2.4 inch x 8.7 inch x 6.9 inch)

Appendix
Rear speakers (Each)
Type 1 Way 1 Speaker
Impedance 3Ω
Rated Input Power 70 W RMS
Max. Input Power 140 W RMS
Approx. 100.0 mm x 140.0 mm x 100.0 mm
Dimensions (W x H x D)
(3.9 inch x 5.5 inch x 3.9 inch)

yy Designs and specifications are subject to change without prior notice.

 54 Appendix

Handling the Speaker Important Information

Relating to Network
When shipping the speaker
Please save the original shipping carton and packing
Services
materials. If you need to ship the speaker, for
maximum protection, re-pack the speaker as it was All information, data, documents, communications,
originally packed at the factory. downloads, files, text, images, photographs, graphics,
videos, webcasts, publications, tools, resources,
software, code, programs, applets, widgets,
Keeping the exterior surfaces clean
applications, products and other content (“Content”)
yy Do not use volatile liquids such as insecticide spray and all services and offerings (“Services”) provided or
near the speaker. made available by or through any third party (each
yy Wiping with strong pressure may damage the a “Service Provider”) is the sole responsibility of the
surface. Service Provider from whom it originated.
yy Do not leave rubber or plastic products in contact The availability of and access to Content and
with the speaker for a long period of time. Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
Cleaning the speaker without prior notice, including, but not limited to the
suspension, removal or cessation of all or any part of
To clean the player, use a soft, dry cloth. If the
the Content or Services.
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use Should you have any inquiry or problem related
strong solvents such as alcohol, benzine, or thinner, to the Content or Services, you may refer to the
as these might damage the surface of the speaker. Service Provider’s website for the most up-to-date
information. LGE is neither responsible nor liable for
5 customer service related to the Content and Services.
Any question or request for service relating to the
Content or Services should be made directly to the
Appendix

respective Content and Service Providers.

Please note that LGE is not responsible for any
Content or Services provided by the Service Provider
or any changes to, removal of, or cessation of
such Content or Services and does not warrant or
guaranty the availability of or access to such Content
or Services.
 Appendix 55

TERMS OF USE We do not accept any responsibility if for any reason

the Services or any part of them are unavailable at
any time or for any period.
These Terms of Use apply to those individuals and Although you may use LG Software to download and
groups who use LG’s Wi-Fi speaker, any software(s) access content or applications made available by third
associated with LG Wi-Fi speaker, this application and parties on your LG Software, we make no promises
any services associated this application (collectively or guarantees that you will always be able to access
“LG Software”). They set out LGE’s responsibilities such content or applications. So far as we are legally
to you as well as identifying the “dos” and “don’ts” able to do so, we exclude any warranties, conditions
that you should be aware of when you use the or other terms which may be implied into these
LG Software. LG Software is proprietary software license terms by law.
owned by LG Electronics Inc., a corporation registered
So far as we are legally able to do so, we exclude any
in Korea with its registered office at Yeouido-dong
liability for any loss or damage incurred by you or
20, Yeoungdeungpo-gu, Seoul, Korea. LGE, and its
any other person in connection with your use of LG
licensors (“LGE”, “us” or “we”).
Software. We are only responsible for loss or damage
By accessing or using LG Software, you confirm that suffered that is a foreseeable result of our breach
you accept these Terms of Use and that you agree to of these license terms or our negligence up to the
comply with them. If you do not agree to these Terms amount specified below, but we are not responsible
of Use, you may not access or use the LG Software. for any loss or damage that is not foreseeable .
To the extent that any conflict arises between these Loss or damage is foreseeable if it is an obvious
Terms of Use and any other document referred to consequence of our breach or if it was contemplated
in these Terms of Use, these Terms of Use will take by you and us when you starting using LG Software.
precedence, unless clearly stated otherwise in the
For any loss or damage that is not excluded
relevant document.
under these license terms, whether in contract,
We grant you a non-exclusive license to use the pre- tort (including negligence) or otherwise, the total
installed copy of LG Software solely to the extent liability of us and our group of companies to you
necessary for you to use your LG Wi-Fi speaker is limited to the amount that you paid for your LG 5
personally and for no other purpose. Software service. To the extent permissible under

Appendix
You acknowledge that all ownership rights in LG the applicable laws, some jurisdictions do not allow
Software anywhere in the world belong exclusively to the limitation or exclusion of liability for incidental
us and that no ownership rights in LG Software are or consequential damages, or have legislation that
transferred to you. You are only entitled to the limited restricts the limitation or exclusion of liability, so the
use of LG Software as is granted in these license above limitation may not apply to you.
terms. Nothing is these license terms shall limit or exclude
You may not copy, modify, decompile or reverse our liability for death or personal injury relating from
engineer our software in any way unless you are our negligence, fraud or fraudulent misrepresentation
allowed to do so by law. We reserve the right to or any other liability that cannot be excluded or
suspend, withdraw or discontinue all or part of the limited by law.
Services without notice if we consider that you are in LG Software provides access to “apps” and link to
breach of these Terms of Use. other services owned and operated by third parties,
You acknowledge that LG Software has not been such as content providers. Any third party apps,
developed to meet your individual requirements. We services and content that you access via the Services
make no promises or guarantees that LG Software are made available to you by these third party
is free from bugs or errors or that it will always be providers and are outside the scope of these Terms of
available. We use commercially reasonable efforts Use.
to provide LG Software on a continuous, high quality Your dealings with any third party providers are solely
basis but cannot guarantee that they will always be between you and the relevant provider and may be
available, uninterrupted or error free. It is possible subject to the provider’s own terms and conditions
that we may have to interrupt or discontinue the LG and privacy policy. We encourage you to read these
Software or suspend or restrict your use of all or any documents, although we are not responsible for their
part of the Services where we consider it reasonably content. We do not accept any responsibility for apps,
necessary for technical, operational, security, legal or services or content provided by third party providers.
regulatory reasons.
 56 Appendix

We may impose limits on the use of or access to Modify as you think appropriate: Complaints
certain third party content, application or services, If you have any queries, concerns or complaints
in any case without notice or liability. We expressly about the Services, please contact [include reference
disclaims any responsibility or liability for any change, to non-personal LG email address].
interruption, disabling, removal of or suspension of
any content, application or service made available Modify as you think appropriate: Miscellaneous
through this LG Software. We are neither responsible Unless expressly stated otherwise, these Terms of
nor liable for customer service related to the content, Use and the documents referred to in them contain
application and services. Any question or request for the entire agreement between us and you relating
service relating to third party’s content, application to your use of the Services and supersede any
or services should be made directly to the respective previous agreements, arrangements, undertakings
content and service providers or application or proposals, written or oral, between us and you
developers, as appropriate. relating to your use of the Services.
These terms do not affect your statutory rights as a We may assign, sub-contract or otherwise transfer
consumer. any or all of our rights and obligations under these
Suitability of the Services for children and parental Terms of Use to any company, firm or person. We
control tools can only do this if it does not materially affect your
rights under these Terms of Use. You may not assign,
Modify this accordingly to suit if appropriate: The sub-contract or otherwise transfer your rights or
Services are not directed at children under the age obligations under these Terms to anyone else (except
of 13 and are not structured specifically to attract where you dispose of your LG Smart TV to a third
children under 13. Further, certain content that party) unless you first agree this with us in writing.
you may access through your use of the Services
may contain material that you consider indecent, If we decide not to exercise or enforce any right that
objectionable or which may not be suitable for we have against you at a particular time, then this
children. does not prevent us from later deciding to exercise or
enforce that right.
If you permit a child to use your LG Smart TV to
5 access the Services, you are solely responsible for If any part of these Terms of Use is found to be
deciding whether or not the relevant Services are illegal, invalid or otherwise unenforceable by a court
Appendix

appropriate for access by that child. or regulator, then, where required, that part shall be
deleted and the remaining parts of the Terms of Use
[Your Smart TV offers a parental control tool (by will continue to be enforceable.
way of a 4 digit PIN). If you have enabled the 4-digit
PIN, your LG Smart TV will not be able to display These Terms of Use do not create or infer any rights
restricted content unless you type in the PIN. You that are enforceable by any person who is not party
are responsible for setting up and maintaining the to them.
parental control tool and any other controls that are These Terms of Use are governed by the laws of the
available, and we will not be responsible for any harm, country where your LG Smart TV is sold and both you
loss or damage you suffer or any other user of your and LGE agree to submit to the exclusive jurisdiction
LG Smart TV suffers as a result of your failure to do of the courts of the country where your LG Smart TV
so. Depending on the models of your LG Smart TV, is sold in connection with the same
these features may not be available. This Agreement shall be governed by the laws of the
Viruses and Security Republic of Korea, excluding their conflicts of laws
Modify this accordingly to suit if appropriate: We use provisions.
commercially reasonable efforts to ensure that the If you have any questions or comments about these
Services are secure and virus free, but those efforts Terms of Use please contact www.lg.com.
cannot and do not guarantee that the Services will be These Terms of Use may be updated by LGE from
free from bugs, viruses, or other vulnerabilities. time to time. If we make a material change to
Further, we do not accept responsibility for any loss our Terms of Use, we will update you via your LG
or damage caused by a virus, distributed denial- Software or other means.
of-service attack, or other technologically harmful
material that may infect your LG Smart TV, data or
other material belonging to you, during your use of
the Services.
 Appendix 57

OPEN SOURCE SOFTWARE NOTICE

INFORMATION
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to
you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of
media, shipping, and handling) upon email request to
[email protected].
This offer is valid for a period of three years after our
last shipment of this product. This offer is valid to
anyone in receipt of this information.
For more information about Google’s open source,
visit device settings of Google Home app.

Disclaimers
Google, Google Home, Google Play, Chromecast built-
in and other related marks and logos are trademarks
of Google LLC.
Google Assistant requires an internet/data
connection. Data rates may apply. 5
The Google Assistant is not available in certain

Appendix
languages and countries.
Subscriptions may be required, and additional terms,
conditions and/or charges may apply.
Controlling certain devices and features in your home
requires a compatible smart device.