Scribd
Upload
142 views

Technical Data Sheet

The technical data sheet provides specifications for a wooden frame that is 2032mm by 914.4mm and 35mm thick, including allowable tolerances for flatness, squareness, materials used, finishes, and defects. The frame must be made of woods like African teak or mahogany, fitted with PUR glue, and meet standards for moisture content, dimensions, and joint construction.

Uploaded by

fourmaxbuildersltd
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
142 views

Technical Data Sheet

The technical data sheet provides specifications for a wooden frame that is 2032mm by 914.4mm and 35mm thick, including allowable tolerances for flatness, squareness, materials used, finishes, and defects. The frame must be made of woods like African teak or mahogany, fitted with PUR glue, and meet standards for moisture content, dimensions, and joint construction.

Uploaded by

fourmaxbuildersltd
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet Wooden Frame

1 Brand name Fourmax Builders Ltd


2 Size 2032 millimeters by 914.4 millimeters.
3 Thickness 35mm
4 General Flatness Twist,cupping,wrapping,not to be
exceed 6mm
5 Frame
1)Approved used material frame: Depth of deviation at any point to be
less than .5mm
• Material African teak (Mvule)/Coconut
wood/Mahogany/doum palm
• Finish of member Matt/Gloss Varnish
• Priming paint/Sanding sealer all on open side-Less than 5 mm
• Squareness and right angle as per drawing
• Defect as per sample Not any damages,proper sheet
fixing,Cracks etc
• Tolerence limit as per drawing
b)Proper use of glue PUR glue by Henkel High final bonding
strength (D4)
c)Corner joint As per drawing
3)Approved fitting at required position Slotting as per drawing
4)Moisture content 10% to 14%

5)Architrave:- As per drawing

1)Approved used material

A)Material African teak (Mvule)/Coconut


wood/Mahogany
B)Finish of members Varnish Gloss/Matt
C)Squareness &Right angle As per Drawing
D)Defect free as per sample Not any damages,Proper top sheet
fixing,cracks etc.

2) A)Grooving&Moulding As per drawing

B) Proper use of Glue Pattex PUR Wood Glue D4


C)Corner Joints As per drawing
Technical Data Sheet Wooden Door
1 Brand Name Fourmax builders
2 Size:- 2032 millimeters by 914.4 millimeters.
3 Thickness 35mm
4 Edges Should be sharp, straight & no damages in top layer
5 Squareness Deviation not more than 01mm on a length of 500mm

6 General Flatness Twist, cupping, wrapping, not to be exceed 6mm.


7 Frame:-

1) Approved Used African teak (Mvule)/Coconut wood/Mahogany/doum


material Frame palm
Type & size Door Hardwood door or Flush door with stiles & rails of
LVB, particle board & laminated on both sides.
Hardwood door or Flush door with stiles & rails of
LVB, Tubular particle board & Prelam HDF/
Laminated on both side.
Toilet with stiles & rails of LVB, tubular particle board
& prelam HDF/ laminated on both side.

Edges band:- PVC edge band 1.5 mm thick matching all side.

Edges Band Gule:- PUR glue by Henkel High final bonding strength (D4)
Squareness & Right Max. 1 mm/ 500 mm As per IS:2202-1.
angles:-

Defect free as per Not any damagesProper top sheet fixing,Cracks etc.
sample:-
Tolerance limit As per IS:2202-1.

Approved fitting at Slotting as per drawing


required position:-

You might also like