Scribd
Upload
1K views1 page

Lotrène Q 50100: High Density Polyethylene Resin

This document provides information on a high density polyethylene resin called Lotrène Q 50100, including its specifications, typical applications, and nominal physical properties. It is an extra high molecular weight hexene copolymer suitable for large blow molded and thermoformed parts requiring good melt strength, rigidity, excellent environmental stress crack resistance, and impact strength. Typical applications include large shipping containers, fuel tanks, agricultural tanks, pallets, automotive dunnage, and boats. The resin meets FDA food packaging regulations and ASTM specifications for polyethylene.

Uploaded by

yang china
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Lotrène Q 50100: High Density Polyethylene Resin

This document provides information on a high density polyethylene resin called Lotrène Q 50100, including its specifications, typical applications, and nominal physical properties. It is an extra high molecular weight hexene copolymer suitable for large blow molded and thermoformed parts requiring good melt strength, rigidity, excellent environmental stress crack resistance, and impact strength. Typical applications include large shipping containers, fuel tanks, agricultural tanks, pallets, automotive dunnage, and boats. The resin meets FDA food packaging regulations and ASTM specifications for polyethylene.

Uploaded by

yang china
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

High Density Polyethylene Resin

Technical Data Sheet



Lotrène Q 50100
This extra high molecular weight hexene copolymer is This resin meets these specifications:
tailored for large blow molded and thermoformed parts • ASTM D4976 – PE 235
that require: • FDA Regulations 21CFR 177.1520.
• Good melt strength Suitable for food packaging.
• Good rigidity
• Excellent ESCR
• Excellent low temperature impact strength

Typical applications include:


• 220L shipping containers
• Gasoline tanks
• Agricultural chemical tanks
• Pallets
• Automative dunnage
• Truck bedliners and boats
Nominal Physical Properties * ASTM Unit Value
3
Density D792 g/cm 0.948

Melt Index, Condition 190 C°/ 2.16 kgs D1238 g/10min 0.06
HLMI, Condition 190 C°/21.6 kgs D1238 g/10min 10

ESCR
Condition A, F50 (100% Igepal) D1693 h >600
Condition B, F50 (100% Igepal) D1693 h >600

Tensile Yield Strength, 50 mm/ min D638 MPa 26


Type IV

Elongation at Break, 50 mm/ min D638 % >600


Type IV

Brittleness Temperature D746 °C <-75

Flexural Modulus, Tangent D790 MPa 1170

Shore D Hardness D2240 - 62

* The nominal properties reported herein are typical of the product, but do not reflect normal testing variance and therefore
should not be used for specification purposes. Values are rounded. The physical properties were determined on compression
molded specimens that were prepared in accordance with Procedure C of ASTM D4703, Annex A1.

Before using this product, the user is advised and cautioned to make its own determination For more information:
and assessment of the safety and suitability of the product for the specific use in question and is
further advised against relying on the information contained herein as it may relate to any Qatar Chemical Company LTD (Q-Chem)
specific use or application. It is the ultimate responsibility of the user to ensure that the P.O. Box 24646
product is suited and the information is applicable to the user’s specific application. Qatar Doha - Qatar
Chemical Company Ltd does not make, and expressly disclaims, all warranties, including Tel: (+974) 44847-110
warranties of merchantability or fitness for a particular purpose, regardless of whether oral or (+974) 44847-111
written, express or implied, or allegedly arising from any usage of any trade or from any Email: [email protected]
course of dealing in connection with the use of the information contained herein or the
product itself. The user expressly assumes all risk and liability, whether based in contact, tort or SDS (+974) 44847-110
otherwise, in connection with the use of the information contained herein or the product itself. OR
Further, information contained herein is given without reference to any intellectual property Visit our site
issues, as well as any international laws which may be encountered in the use thereof. www.qchem.com.qa
Such questions should be investigated by the user.
November 2018

You might also like