Data sheet 6EP1332-5BA00
SITOP PSU100C 24 V/2.5 A
SITOP PSU100C 24 V/2.5 A stabilized power supply input: 120/230
V AC (DC 110-300 V) output: 24 V DC/2.5 A
Input
Input 1-phase AC or DC
Rated voltage value Vin rated 100 ... 230 V
Voltage range AC 85 ... 264 V
Input voltage
● at DC 110 ... 300 V
Wide-range input Yes
Overvoltage resistance 2.3 × Vin rated, 1.3 ms
Mains buffering at Iout rated, min. 20 ms; at Vin = 230 V
Rated line frequency 1 50 Hz
Rated line frequency 2 60 Hz
Rated line range 47 ... 63 Hz
Input current
● at rated input voltage 100 V 1.21 A
● at rated input voltage 230 V 0.67 A
Switch-on current limiting (+25 °C), max. 31 A
I²t, max. 2.4 A²·s
Built-in incoming fuse internal
Output
6EP1332-5BA00 Subject to change without notice
Page 1/4 05/04/2017 © Copyright Siemens
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24 V
Total tolerance, static ± 3%
Static mains compensation, approx. 0.1 %
Static load balancing, approx. 0.2 %
Residual ripple peak-peak, max. 200 mV
Residual ripple peak-peak, typ. 55 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 300 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz) 50 mV
Adjustment range 22.2 ... 26.4 V
Product function Output voltage adjustable Yes
Output voltage setting via potentiometer
Status display Green LED for output voltage OK
On/off behavior Overshoot of Vout approx. 1 %
Startup delay, max. 0.7 s
Voltage rise, typ. 100 ms
Rated current value Iout rated 2.5 A
Current range 0 ... 2.5 A
● Note +55 ... +70 °C: Derating 3,5%/K
Supplied active power typical 60 W
Parallel switching for enhanced performance Yes; Start-up with single nominal load only
Numbers of parallel switchable units for enhanced 2
performance
Efficiency
Efficiency at Vout rated, Iout rated, approx. 87 %
Power loss at Vout rated, Iout rated, approx. 9W
Power loss [W] during no-load operation maximum 0.75 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), 0.1 %
max.
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± 3%
typ.
Load step setting time 10 to 90%, typ. 4 ms
Load step setting time 90 to 10%, typ. 4 ms
Protection and monitoring
Output overvoltage protection Yes, according to EN 60950-1
Current limitation, typ. 3A
Property of the output Short-circuit proof Yes
Short-circuit protection Electronic shutdown, automatic restart
Overload/short-circuit indicator -
Safety
Primary/secondary isolation Yes
6EP1332-5BA00 Subject to change without notice
Page 2/4 05/04/2017 © Copyright Siemens
Galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN
50178
Protection class Class I
Leakage current
● maximum 3.5 mA
● typical 0.4 mA
CE mark Yes
UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259;
cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File
E151273, NEC class 2 (acc. to UL 1310)
Explosion protection ATEX (EX) II 3G Ex nA IIC T4; cCSAus (CSA C22.2 No. 213-
M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2, Group ABCD,
T4
FM approval -
CB approval Yes
Marine approval GL, ABS
Degree of protection (EN 60529) IP20
EMC
Emitted interference EN 55022 Class B
Supply harmonics limitation not applicable
Noise immunity EN 61000-6-2
Operating data
Ambient temperature
● during operation -20 ... +70 °C
— Note with natural convection
● during transport -40 ... +85 °C
● during storage -40 ... +85 °C
Humidity class according to EN 60721 Climate class 3K3, no condensation
Mechanics
Connection technology screw-type terminals
Connections
● Supply input L, N, PE: Removable screw terminal, each for 1 x 0.5 ... 2.5 mm²
● Output +: 1 screw terminal for 0.5 ... 2.5 mm²; -: 2 screw terminals for 0.5
... 2.5 mm²
● Auxiliary -
Width of the enclosure 45 mm
Height of the enclosure 80 mm
Depth of the enclosure 100 mm
Required spacing
● top 50 mm
● bottom 50 mm
● left 0 mm
6EP1332-5BA00 Subject to change without notice
Page 3/4 05/04/2017 © Copyright Siemens
● right 0 mm
Weight, approx. 0.22 kg
Product feature of the enclosure housing for side-by- Yes
side mounting
Installation Snaps onto DIN rail EN 60715 35x7.5/15
Electrical accessories Removable spring-type terminal 6EP1971-5BA00
MTBF at 40 °C 2 881 014 h
Other information Specifications at rated input voltage and ambient temperature +25
°C (unless otherwise specified)
6EP1332-5BA00 Subject to change without notice
Page 4/4 05/04/2017 © Copyright Siemens
