2020/06/19 02:21:42 (GMT+09:00)

MHC-V73D
SERVICE MANUAL
Conditions of Use:
(1) Please use this information only for the purpose of performing repair, maintenance and/or configuration services of the Sony products (hereinafter the “Repair services”) under the
service agreement entered into with the Sony group company (hereinafter the “Service agreement”). Using this information for any purpose other than the purpose described foregoing
is forbidden.
(2) Only the Authorized Servicer’s officers, employees or subcontractors (including their officers and employees) whose duties justify a need-to-know and who have agreed to hold
confidential this information (collectively hereinafter the “Permitted users”) are permitted to access and use this information. To disclose or disseminate to any person other than the
Permitted users is forbidden.
(3) Destroy or erase any and all portion of this information promptly in an irrecoverable and secure fashion after achieving the purpose described in Section (1) above.
(4) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part without the prior written permission of the author.
(Notwithstanding foregoing, it is permitted to copy and distribute this information to the Permitted users.)
(5) Please notify immediately any leakage, loss, theft, misappropriation, or other misuse of this information by e-mail to the following address:
[email protected]
(6) In addition to the above, the terms and conditions of the Service agreement shall be applied to using this information.

Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-to-date before using it.

Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus affected unit was found during
service, contact your Service Headquarters.

Sony CONFIDENTIAL
For Authorized Servicer

9-930-606-01
2020F80-1
© 2020.06 Sony EMCS (Malaysia) PG Tec

SYS SET
2020/06/19 02:21:42 (GMT+09:00)

MHC-V73D
SERVICE MANUAL AEP Model
E Model
Ver. 1.0 2020.06
Australian Model

Model Name Using Similar Mechanism MHC-V72D

DVD Mechanism Type CDM90-DVBU204//M
Optical Pick-up Name CMS-S76RFS7GP

SPECIFICATIONS
Speaker section Laser Diode Properties DAB/DAB+ frequency table (Band-III) BLUETOOTH section
Speaker system: Emission Duration: Continuous Frequency Label Communication system:
4-way, Double Bass Reflex Wavelength: 790 nm BLUETOOTH Standard version 4.2
Speaker unit: Laser Output*: Less than 44.6 μW 174.928 MHz 5A Output:
Tweeter L/R Front: 40 mm, horn type * This output is the value measurement 176.640 MHz 5B BLUETOOTH Standard Power Class 2
Tweeter L/R Rear: 40 mm, horn type at a distance of 100 mm from the 178.352 MHz 5C Maximum output power:
Midrange L/R: 80 mm, horn type objective lens surface on the Optical 180.064 MHz 5D <9.5 dBm
Woofer: 300 mm, cone type Pick-up Block with 7 mm aperture. 181.936 MHz 6A Maximum number of devices to be registered:
Frequency response: 183.648 MHz 6B 8 devices
Inputs
20 Hz – 20 kHz 185.360 MHz 6C Maximum number of simultaneous connection
(TV) AUDIO IN:
Video color system format: 187.072 MHz 6D (Multipoint):
Voltage 2 V, impedance 47 kilohms
Latin American models: 3 devices
(TV) ARC: 188.928 MHz 7A
NTSC Maximum communication range:
Supported audio signal: 190.640 MHz 7B
Other models: Line of sight approx. 10 m1)
2-channel Linear PCM 192.352 MHz 7C
NTSC and PAL Frequency band:
MIC1: 194.064 MHz 7D
Sensitivity 1 mV, impedance 10 kilohms USB section 2.4 GHz band (2.4000 GHz –
195.936 MHz 8A 2.4835 GHz)
MIC2/GUITAR: Supported USB device:
Mass Storage Class 197.648 MHz 8B Modulation method:
Sensitivity 1 mV, impedance 10 kilohms
(when guitar mode is turned off) Maximum current: 199.360 MHz 8C FHSS (Freq Hopping Spread Spectrum)
Sensitivity 200 mV, impedance 250 1A 201.072 MHz 8D Compatible BLUETOOTH profiles2):
kilohms (when guitar mode is (USB) port: 202.928 MHz 9A A2DP (Advanced Audio Distribution
turned on) Type A 204.640 MHz 9B Profile)
AVRCP (Audio Video Remote
Outputs FM tuner section (Except AEP model) 206.352 MHz 9C
Control Profile)
HDMI OUT (TV) ARC: FM stereo, FM superheterodyne tuner 208.064 MHz 9D
Supported codecs:
Supported audio signal: Antenna: 209.936 MHz 10A SBC (Subband Codec)
2-channel Linear PCM (up to 48 kHz), FM lead antenna (aerial) 211.648 MHz 10B AAC (Advanced Audio Coding)
Dolby Digital Tuning range: 213.360 MHz 10C LDAC
BR model: 215.072 MHz 10D
HDMI section 1)
The actual range will vary depending on
76.0 MHz – 108.0 MHz (100 kHz step) 216.928 MHz 11A
Connector: factors such as obstacles between devices,
Other models:
Type A (19 pin) 218.640 MHz 11B magnetic fields around a microwave oven,
87.5 MHz – 108.0 MHz (50 kHz step)
Disc player section 220.352 MHz 11C static electricity, reception sensitivity,
DAB/DAB+/FM tuner section 222.064 MHz 11D antenna’s performance, operating system,
System:
(AEP model) 223.936 MHz 12A software application, etc.
Compact disc and digital audio and
Antenna: 2)
BLUETOOTH standard profiles indicate the
video system 225.648 MHz 12B
DAB/FM lead antenna (aerial) purpose of BLUETOOTH communication
227.360 MHz 12C
Frequency range between devices.
DAB/DAB+ (Band-III): 174.928 229.072 MHz 12D
(5A) MHz – 239.200 (13F) MHz 230.784 MHz 13A NFC section
FM: 87.5 MHz – 108.0 MHz 232.496 MHz 13B Frequency band:
(50 kHz step) 234.208 MHz 13C 13.56 MHz
235.776 MHz 13D
237.488 MHz 13E
239.200 MHz 13F – Continued on next page –

HOME AUDIO SYSTEM

Sony CONFIDENTIAL
For Authorized Servicer

SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

Supported audio formats

Supported bit rate and sampling frequencies:
License and Trademark Notice NOTES ON CHIP COMPONENT REPLACEMENT
• is a trademark of DVD Format/Logo
MP3: Licensing Corporation. • Never reuse a disconnected chip component.
32/44.1/48 kHz, 32 kbps –
320 kbps (VBR) • “DVD+RW”, “DVD-RW”, “DVD+R”, • Notice that the minus side of a tantalum capacitor may be dam-
“DVD-R”, “DVD VIDEO”, and the “CD”
AAC:
44.1 kHz, 48 kbps – logos are trademarks. aged by heat.
320 kbps (CBR/VBR) • WALKMAN ® and WALKMAN ® logo are
WMA: registered trademarks of Sony Corpora- FLEXIBLE CIRCUIT BOARD REPAIRING
44.1 kHz, 48 kbps – tion.
192 kbps (CBR/VBR) • MPEG Layer-3 audio coding technology • Keep the temperature of the soldering iron around 270 °C during
WAV:
44.1/48 kHz (16 bit)
and patents licensed from Fraunhofer IIS
and Thomson.
repairing.
Supported video formats • Windows Media is either a registered • Do not touch the soldering iron on the same conductor of the
Xvid: trademark or trademark of Microsoft circuit board (within 3 times).
Video codec: Xvid video Corporation in the United States and/or
Bit rate: 4.854 Mbps (MAX) other countries. • Be careful not to apply force on the conductor when soldering or
Resolution/Frame rate: • This product is protected by certain
720 × 480, 30 fps intellectual property rights of Microsoft unsoldering.
720 × 576, 25 fps (except for Latin Corporation. Use or distribution of
American models) such technology outside of this product SAFETY CHECK-OUT
Audio codec: MP3 is prohibited without a license from
MPEG4: Microsoft or an authorized Microsoft After correcting the original service problem, perform the following
File format: MP4 File Format subsidiary.
Video codec: MPEG4 Simple • This system incorporates Dolby* Digital.
safety check before releasing the set to the customer:
Profile (AVC is not compatible.) * Manufactured under license from Dolby Check the antenna terminals, metal trim, “metallized” knobs,
Bit rate: 4 Mbps Laboratories. Dolby, Dolby Audio, and the
Resolution/Frame rate: double-D symbol are trademarks of Dolby screws, and all other exposed metal parts for AC leakage. Check
720 × 480, 30 fps
720 × 576, 25 fps (except for Latin
Laboratories. leakage as described below.
American models) • This system incorporates High-
Definition Multimedia Interface
Audio codec: AAC-LC (HE-AAC is
(HDMI™) technology. The terms HDMI, LEAKAGE TEST
not compatible.)
DRM: Not compatible HDMI High-Definition Multimedia
Interface, and the HDMI Logo are
The AC leakage from any exposed metal part to earth ground and
General trademarks or registered trademarks of from all exposed metal parts to any exposed metal part having a
Power requirements: HDMI Licensing Administrator, Inc.
AC 120 V – 240 V, 50/60 Hz • “BRAVIA” is a trademark of Sony
return to chassis, must not exceed 0.5 mA (500 microamperes).
Power consumption: Corporation. Leakage current can be measured by any one of three methods.
125 W • LDAC™ and LDAC logo are trademarks
Power consumption (at the Power Saving of Sony Corporation. 1. A commercial leakage tester, such as the Simpson 229 or RCA
mode): • The BLUETOOTH ® word mark and WT-540A. Follow the manufacturers’ instructions to use these
0.5 W (when “BT STBY” is set to logos are registered trademarks owned
“OFF” and [CONTROL FOR HDMI] by Bluetooth SIG, Inc. and any use instruments.
is set to [OFF])
2 W* (when “BT STBY” is set to
of such marks by Sony Corporation is
under license. Other trademarks and
2. A battery-operated AC milliammeter. The Data Precision 245
“ON” and [CONTROL FOR HDMI] is trade names are those of their respective digital multimeter is suitable for this job.
set to [ON]) owners.
Dimensions (W/H/D) (Approx.): • The N-Mark is a trademark or registered 3. Measuring the voltage drop across a resistor by means of a
428 mm × 921 mm × 370 mm trademark of NFC Forum, Inc. in the VOM or battery-operated AC voltmeter. The “limit” indication
Mass (Approx.): United States and in other countries.
21.2 kg • Android, Google Play, and the Google is 0.75 V, so analog meters must have an accurate low-voltage
Operating temperature: Play logo are trademarks of Google LLC. scale. The Simpson 250 and Sanwa SH-63Trd are examples
5 °C – 35 °C • Apple, iPhone, iPod, and iPod touch are
* The power consumption of the system will trademarks of Apple Inc., registered in of a passive VOM that is suitable. Nearly all battery operated
be less than 0.5 W when there is no HDMI the U.S. and other countries. digital multimeters that have a 2V AC range are suitable. (See
connection and “BT STBY” is set to “OFF”. • Use of the Made for Apple badge means
Supplied accessories that an accessory has been designed Fig. A)
(Except AEP model): to connect specifically to the Apple
Remote control (RMT-AM420U) product(s) identified in the badge, and
(DC 3 V) (1) has been certified by the developer to To Exposed Metal
R03 (DC 1.5 V) (size AAA) batteries (2) meet Apple performance standards.
FM lead antenna (aerial) (1) Apple is not responsible for the operation Parts on Set
AC power cord (mains lead) (1) of this device or its compliance with
AC plug adaptor* (1) (supplied only safety and regulatory standards.
for certain areas) • THIS PRODUCT IS LICENSED UNDER
* This plug adaptor is not for the use THE MPEG-4 VISUAL PATENT
in Chile, Paraguay and Uruguay. Use PORTFOLIO LICENSE FOR THE
this plug adaptor in the countries/ PERSONAL AND NON-COMMERCIAL
regions where it is necessary. USE OF A CONSUMER FOR
Supplied accessories (i) ENCODING VIDEO IN COMPLIANCE
(AEP model): WITH THE MPEG-4 VISUAL STAN-
Remote control (RMT-AM420U) DARD (“MPEG-4 VIDEO”) AC
(DC 3 V) (1) AND/OR 0.15 μF 1.5 kΩ voltmeter
R03 (DC 1.5 V) (size AAA) batteries (2) (ii) DECODING MPEG-4 VIDEO THAT
DAB/FM lead antenna (aerial) (1) WAS ENCODED BY A CONSUMER (0.75 V)
AC power cord (mains lead) (2) ENGAGED IN A PERSONAL AND
For the customers in AEP: NON-COMMERCIAL ACTIVITY AND/
Use the AC power cord (mains lead) (A). OR WAS OBTAINED FROM A VIDEO
For safety reasons, the AC power cord PROVIDER LICENSED TO PROVIDE
(mains lead) (B) is not intended for the MPEG-4 VIDEO.
above countries/regions and shall therefore NO LICENSE IS GRANTED OR SHALL
not be used there. BE IMPLIED FOR ANY OTHER USE. AD-
For customers in other countries/regions: DITIONAL INFORMATION INCLUDING Earth Ground
Use the AC power cord (mains lead) (B). THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES Fig. A. Using an AC voltmeter to check AC leakage.
(A) AND LICENSING MAY BE OBTAINED
FROM MPEG LA, L.L.C.
HTTP://WWW.MPEGLA.COM
• All other trademarks are trademarks of SAFETY-RELATED COMPONENT WARNING!
their respective owners.
• In this guide, ™ and ® marks are not
specified. COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE
(B) PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.

Design and specifications are subject to

change without notice.

3
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

TABLE OF CONTENTS

1. SERVICING NOTES ............................................. 5 6-10. Printed Wiring Board - SMPS Board - ........................... 44
6-11. Printed Wiring Board - VFD Board - ............................. 45
2. DISASSEMBLY 6-12. Printed Wiring Board - MIC-USB Board - ..................... 46
2-1. Disassembly Flow ........................................................... 11 6-13. Printed Wiring Board - POWER-KEY Board - .............. 47
2-2. Side Panel M-L, M-R Section......................................... 12 6-14. Printed Wiring Board
2-3. Top-M Panel Section....................................................... 13 - LED HUB Board (Component Side) - ......................... 48
2-4. Loading-M Panel Section ............................................... 14 6-15. Printed Wiring Board
2-5. Rear Panel ST-M Section ................................................ 15 - LED HUB Board (Conductor Side) - ........................... 49
2-6. DAB Assembly_UART (AEP), CDM Section ............... 16 6-16. Printed Wiring Board - DAB Board (AEP) - .................. 50
2-7. CDM90-DVBU204//M ................................................... 17 6-17. Printed Wiring Board - PARTY LED-LR Board - .......... 50
2-8. Service Optical Device (7G), Flexible Flat Cable .......... 18 6-18. Printed Wiring Board - EXTENSION Board - ............... 51
2-9. SMPS Board ................................................................... 19 6-19. Printed Wiring Board - PARTY RGB-FR Board - .......... 51
2-10. MOTHERBOARD Board ............................................... 20 6-20. Printed Wiring Board - PARTY RGB-BK Board - ......... 51
2-11. Chassis Section, Mid Horn Rear-M Section ................... 21 6-21. Printed Wiring Board - SW LED-L Board - ................... 52
2-12. Front Panel Section ......................................................... 22 6-22. Printed Wiring Board - SW LED-R Board - ................... 52
2-13. Front Panel ST-M Section, Front Panel SW Section ...... 23 6-23. Printed Wiring Board - IR Board -.................................. 52
2-14. Rear Cabinet Section ...................................................... 24 6-24. Printed Wiring Board - HORN LED Board - ................. 53
2-15. Loudspeaker (30cm) (Woofer) (SP7).............................. 25 6-25. Printed Wiring Board - NFC Board - .............................. 53

3. TEST MODE ............................................................ 26 7. EXPLODED VIEWS

7-1. Loading-M Panel Section ............................................... 54
4. ELECTRICAL CHECK ......................................... 27 7-2. DAB Assembly_UART (AEP) Section ......................... 55
7-3. SMPS, Motherboard Board Section................................ 56
5. TROUBLESHOOTING .......................................... 28 7-4. Chassis Section ............................................................... 57
7-5. Mid Horn Rear-M Section .............................................. 58
6. DIAGRAMS 7-6. Front Panel ST-M Section ............................................... 59
6-1. Block Diagram 7-7. Front Panel SW Section .................................................. 60
- RS SERVO, USB, TOUCH, HDMI Section - .............. 34 7-8. Loudspeaker Section ....................................................... 61
6-2. Block Diagram - MAIN Section -................................... 35 7-9. Rear Cabinet Section ...................................................... 62
6-3. Block Diagram - AMP Section - ..................................... 36 7-10. Side Panel M-L, M-R Section......................................... 63
6-4. Block Diagram 7-11. Top-M Panel Section....................................................... 64
- PANEL, POWER SUPPLY Section - ........................... 37 7-12. Rear Panel ST-M Section ................................................ 65
6-5. Block Diagram - SMPS Section - ................................... 38 7-13. CDM Section .................................................................. 66
6-6. Printed Wiring Board - MOTHERBOARD Board 7-14. DVD Mechanism Section (CDM90-DVBU204//M) ...... 67
(Component Side) - ......................................................... 40
6-7. Printed Wiring Board - MOTHERBOARD Board 8. ELECTRICAL PARTS LIST .............................. 68
(Conductor Side) - .......................................................... 41
6-8. Printed Wiring Board Accessories are listed in the last part of the electrical parts list.
- SENSOR Board (Component Side) - ........................... 42
6-9. Printed Wiring Board
- SENSOR Board (Conductor Side) - ............................. 43

4
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL

SECTION 1 For Authorized Servicer

SERVICING NOTES
UNLEADED SOLDER MODEL IDENTIFICATION
Boards requiring use of unleaded solder are printed with the – Rear view –
leadfree mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)

: LEAD FREE MARK

Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.

NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK

OR BASE UNIT

The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the MODEL NUMBER LABEL
repair parts.
The flexible board is easily damaged and should be handled with MODEL NO. : MHC-V73D

care.

NOTES ON LASER DIODE EMISSION CHECK

The laser beam on this model is concentrated so as to be focused on
SERIAL NO.

the disc reflective surface by the objective lens in the optical pickup Destination Code
block. Therefore, when checking the laser diode emission, PART No.
observe from more than 30 cm away from the objective lens.

CAUTION
Caution – use of controls or adjustments or performance of proce- Model Part No.
dures other than those specified herein may result in hazardous ra- LA9 5-014-070-0[]
diation exposure. AEP 5-014-070-1[]

This appliance is classified as a CLASS 1 LASER product under AUS 5-014-070-3[]

IEC 60825-1:2014. E4 5-014-070-4[]
E12 5-014-070-5[]
When unpacking the carton, be sure that two people handle the unit.
RU 5-014-070-7[]
Dropping the unit may cause personal injury and/or property dam-
age. MY 5-014-070-8[]
AR 5-014-070-9[]
For customers in EA
BR 5-014-072-2[]
EA 5-014-072-3[]

CAUTION
Risk of explosion if the battery is replaced by an incorrect type.

Do not expose batteries or appliances with battery-installed to ex-

cessive heat, such as sunshine and fire.

5
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

DESTINATION ABBREVIATIONS NOTE OF REPLACEMENT OF THE SENSOR BOARD

The following abbreviations for model destinations are used in this When the SENSOR board is defective, exchange the TOP PANEL
service manual. ASSY SERVICE (V73D).

• Abbreviation NOTE OF REPLACEMENT OF THE MS-476 BOARD

AR : Argentina model When the MS-476 board is defective, exchange the entire
AUS : Australian model
LOADING COMPLETE ASSY (T).
BR : Brazilian model
E4 : African model
E12 : 220-240 V AC area in E model TEST DISCS
EA : Saudi Arabia model Use following TEST DISC when this unit confirms the operation
LA9 : Latin-American model and checks it.
MY : Malaysia model
RU : Russian model • For CD
Part No. Description
DESTINATION SETTING METHOD 3-702-101-01 DISC (YEDS-18), TEST
The destination information isn’t written in the MOTHERBOARD 4-225-203-01 DISC (PATD-012), TEST
board for the service. J-2501-307-A DISC (HLX-A1), TEST
The message “PLEASE SET DEST” is always displayed during sys-
tem is turn on. • For DVD SL (Single Layer)
Therefore, when the MOTHERBOARD board is replaced, be sure to Part No. Description
perform the destination setting (Important work). J-6090-069-A DISC (HLX-503), TEST (NTSC)
J-6090-088-A DISC (HLX-504), TEST (NTSC)
Note 1: The initial setting destination of the MOTHERBOARD board for
J-2501-305-A DISC (HLX-513), TEST (NTSC)
the service is temporary set as “LATIN”. The message “DEST
ERR” is displayed on the screen display panel. J-6090-077-A DISC (HLX-506), TEST (PAL)
Note 2: When distinguishing the destination of the product, refer to the
“MODEL IDENTIFICATION” on page 5. • For DVD DL (Double Layer)
Note 3: If destination setting isn’t performed, it is possibility to occur the Part No. Description
defect to each operation of this unit. J-6090-071-A DISC (HLX-501), TEST (NTSC)
Note 4: Destination would be locked if it has changed for 5 times. J-6090-089-A DISC (HLX-505), TEST (NTSC)
J-2501-306-A DISC (HLX-514), TEST (NTSC)
Procedure: J-6090-078-A DISC (HLX-507), TEST (PAL)
1. Touch two touch keys of the [FIESTA] and [TUNING + >]
simultaneously for 5 seconds during the demonstration mode. RELEASING THE DISC TRAY LOCK
2. It enters the destination setting mode, the message The disc tray lock function for the antitheft of sample disc in the
“D XXXXX” is displayed on the screen display panel. shop is equipped.
Note 5: If the message “DESTLOCK” is displayed on the screen display It can release the lock function in the following procedure.
panel, touch the [N] touch key to release from this mode. Because
the destination is locked, and it cannot change the destination.
Releasing Procedure:
3. Touch [TUNING + >] / [TUNING ― .] touch key to select
1. Press the [1] button to turn the power on.
the destination based on the set’s country.
2. Touch the [FUNCTION] touch key to turn the DVD/CD func-
Screen Destination Country tion.
display code 3. Touch [MEGA BASS] and [VOCAL FADER/VOICE
CHANGER] touch keys simultaneously for three seconds.
“D ASIA” SP6, TH1 Southeast Asia countries
4. The message “UNLOCKED” is displayed on the screen display
“D INDIA” E12 India panel and the disc tray is unlocked.
E3, E93, E4, Note: When “LOCKED” is displayed on the screen display panel, the
“D ME AFC” Middle East & Africa countries disc tray lock is not released by turning the power on/off with the
SA2, EA3
[1] button.
“D OCEANI” AU1 Australia & New Zealand
“D JAPAN” J1 Japan
IF ERROR CODE AND “CHECK MANUAL” FLASHES ON
“D BRAZIL” BR1 Brazil THE DISPLAY
“D N AME” UC2, CA2 America & Canada See the following table for the corrective action.
Central & South America
“D LATIN” LA9, AR2 Error code Corrective action
countries (except Brazil)
“D RUSSIA” RU1 Russia & CIS country “PROTECT2” Contact your nearest Sony dealer.
Europe countries
“D EUROPE” CEL, CEK “PROTECT3”/ Immediately unplug the AC power cord
(except CIS country)
“PROTECT4”/ (mains lead), and check if anything is
4. Touch [N] touch key to confirm the selection. “PROTECT6” blocking the ventilation openings of the unit.
5. “RESET” appears on the screen display panel. After that, After you have checked and found no
“SONY” appears on the screen display panel. The system problems, reconnect the AC power cord
automatically turn on and off once. Please be sure that the (mains lead), and turn on the system.
system stay at demo mode finally before switch off the power If the issue persists, contact your nearest Sony
supply. dealer.
6. Mode in “MODEL, DESTINATION AND VERSION DISPLAY
MODE” on page 26 again to confirm on the model & destination.

6
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

Protect Type Description:

X (Error Code) Description
2 Defect of thermistor IC or charging circuit
used by SPM (Sound Pressure Management)
system.
3 • There is possibility of over current happen at
speaker output or speaker damage (shorted).
• Unusual heat up of AMP IC by improper as-
sembly of heatsink or lack of thermal com-
pound.
• Under voltage Protection (no supply to AMP
IC when power ON).
4 DC appears in SP terminal by defect of AMP
IC.
6 • There is possibility of DC FAN is blocked or
damaged.
• Defect of DC FAN driver circuit.

SELF-DIAGNOSIS FUNCTION
When the self-diagnosis function is activated, a service number ap-
pears on the TV screen or the display.
The service number consists of an alphabet and numerals (e.g. C
13 50). See the following table for the cause and corrective action.
First 3 characters Cause and corrective action
of the service
number
C 13 This disc is dirty.
• Clean the disc with a soft cloth.
C 31 The disc is not inserted correctly.
• Turn off the system, then turn it on
again.
Then re-insert the disc correctly.
E XX To prevent a malfunction, the system has
(XX is a number) performed the self-diagnosis function.
• Contact your nearest Sony dealer or
local authorized Sony service facility
and give the 5-character service number.
Example: E 61 10

7
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

HOW TO OPEN THE TRAY WHEN POWER SWITCH TURN OFF

Note 1: After the side panel M-L, M-R section and top-M panel section are removed, this work is done.
Note 2: Please prepare the thin wire (clip etc. processed to the length of 25mm, diameter 1.7mm).

1 Remove the side panel M-L, M-R section.

2 Remove the top-M panel section.
(Illustration of disassembly is omitted.)

3 Insert the clip etc.

hole
– Left view –

Insert the clip etc. processed

to the length of 25mm, diameter
1.7mm in the hole on the side of
DVD mechanism
the CDM and push.
deck

25mm,
diameter
1.7mm

tray
Note: Push after it inserts it
in this hole well.
– Top view –

8
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

CAPACITOR ELECTRICAL DISCHARGE PROCESSING

When removing the SMPS board and MOTHERBOARD board, be sure to perform the discharge process by referring below procedure.
Remove SMPS board first follow by MOTHERBOARD board.
Note: Be sure to discharge using a resistor of 500~800 .

SMPS Board (Conductor side view)

1. Disconnect all the wires and FFC which connected to the SMPS board (avoid touching any component).
2. Unscrew the SMPS board.
3. Pulling up the wire (avoid touching any component) to lift up the SMPS board.
4. Flip the SMPS board to conductor side and perform discharge at terminal of C6301, C6322, C6534, C6558 and C6559 for 10 seconds each.

800 :/5 W 800 :/5 W

R R
800 :/5 W

C6559
800 :/5 W
C6301 C6322
R C6558

800 :/5 W
C6534
R

MOTHERBOARD Board (Conductor side view)

1. Disconnect all the wires and FFC which connected to the MOTHERBOARD board (avoid touching any component).
2. Unscrew the MOTHERBOARD board.
3. Holding the both edge (avoid touching any component) to lift up the MOTHERBOARD board.
4. Flip the MOTHERBOARD board to conductor side and perform discharge at terminal of C2076 for 10 seconds each.

C2076 800 :/5 W

9
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

SERVICE POSITION

stand
VFD board

MIC-USB board

POWER-KEY board

SMPS board

CDM90-DVBU204//M

10
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL

SECTION 2 For Authorized Servicer

DISASSEMBLY
Note: Disassemble the unit in the order as shown below.

2-1. DISASSEMBLY FLOW

SET
‡ JIG
When disassembling the unit, use the following
jig for speaker removal.
2-2. SIDE PANEL M-L, M-R SECTION
(Page 12) Part No. Description
J-2501-238-A JIG FOR SPEAKER REMOVAL

2-3. TOP-M PANEL SECTION

(Page 13)

2-4. LOADING-M PANEL SECTION

(Page 14)

2-5. REAR PANEL ST-M SECTION

(Page 15)

2-6. DAB ASSEMBLY_UART (AEP), CDM SECTION

(Page 16)

2-7. CDM90-DVBU204//M
(Page 17)

2-8. SERVICE OPTICAL 2-9. SMPS BOARD

DEVICE (7G), (Page 19)
FLEXIBLE FLAT CABLE
(Page 18)

2-10. MOTHERBOARD BOARD

(Page 20)

2-11. CHASSIS SECTION, MID HORN REAR-M SECTION

(Page 21)

2-12. FRONT PANEL SECTION

(Page 22)

2-13. FRONT PANEL ST-M SECTION, FRONT PANEL SW SECTION

(Page 23)

2-14. REAR CABINET SECTION

(Page 24)

2-15. LOUDSPEAKER (30CM) (WOOFER) (SP7)

(Page 25)

11
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

Note: Follow the disassembly procedure in the numerical order given.

2-2. SIDE PANEL M-L, M-R SECTION

‡:LUHVHWWLQJ
top side
1 two screws
(tapping (flat head))
4 side panel M-L section

3 flexible flat cable

(9 core) (CN9501)

1 three screws
(tapping
(flat head))
filament PARTY LED-LR
tape board
1 two screws
2
(tapping
(flat head))
8 side panel M-R section
‡:LUHVHWWLQJ
top side

5 two screws
(tapping
(flat head))
6
5 three screws
(tapping
(flat head))

7 flexible flat
filament PARTY LED-LR cable (9 core) 5 two screws
tape board (CN8508) (tapping
(flat head))

12
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-3. TOP-M PANEL SECTION

‡:LUHVHWWLQJ top side

‡:LUHVHWWLQJ top side

8 Draw out the wire from

the hook.

qa top-M panel section

hook SENSOR board

7 CN451 (5P)

4 flexible flat cable

hook bracket, CDM
(7 core) (CN120)
A
3 flexible flat cable
(25 core) (CN126)

1 two screws 9
(+BVTP 3 u 8) 6 one screw
(+BVTP 3 u 8)

0 flexible flat cable

(4 core) (CN8451)
2 two screws
(tapping)
‡:LUHVHWWLQJ
top side
IR board 5 flexible flat cable
(9 core) (CN8200)

1 two screws
(+BVTP 3 u 8)

filament tape

‡:LUHVHWWLQJ
MOTHERBOARD
board

filament tape
rear side

13
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-4. LOADING-M PANEL SECTION

1 Insert the clip etc.

3 four claws

4 loading-M
panel section

hole
– Left view –

Insert the clip etc. processed

to the length of 25mm, diameter
1.7mm in the hole on the side of
DVD mechanism
the CDM and push.
deck

25mm, 2 Draw out

the tray.
diameter
1.7mm

tray
Note: Push after it inserts it
in this hole well.
– Top view –

14
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-5. REAR PANEL ST-M SECTION

‡:LUHVHWWLQJ
Push the protrusion, and
remove the terminal
(wide side) [blue].
loudspeaker (4cm)
(tweeter) (R-CH)
(SP3) top side

7 terminal
(wide side) 9 rear panel ST-M
[blue] section
6 three screws
7 terminal
5 two screws (tapping)
(narrow side)
[blue/black] (tapping)
2 cover, jack assy

1 one screw
protrusion
(tapping)
Push the protrusion, and
remove the terminal
(narrow side) [blue/black]. 3 one screw
(+BVTP 3 u 8)
4 one screw
(+B 3 u 6)

‡:LUHVHWWLQJ
Push the protrusion, and
remove the terminal
8 terminal (wide side) [red].
(wide side) loudspeaker (4cm)
[red] (tweeter) (L-CH)
(SP6) top side

8 terminal
(narrow side)
[red/black]

protrusion
Push the protrusion, and
remove the terminal
(narrow side) [red/black].

15
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-6. DAB ASSEMBLY_UART (AEP), CDM SECTION

9 Remove the CDM section

in the direction of the arrow.

0 CDM section

7 flexible flat cable

(24 core) (CN302)

5 CN402 6 flexible flat cable

8 two screws (4P)
(+BVTP 3 u 8) (5 core) (CN303)

(AEP)
1 two screws
(+BVTP 3 u 8)

2 two hooks

(AEP)
4 DAB
assembly_UART

3 flexible flat cable

(11 core) (CN600)

16
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-7. CDM90-DVBU204//M

1 four screws
(+BVTP 3 u 8)

5 CDM90-DVBU204//M

4 Draw three wires out

of the hole in CDM
bracket section. 3 core, ferrite

2 cushion, saranet
(30 u 50)

6 CDM bracket section

17
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-8. SERVICE OPTICAL DEVICE (7G), FLEXIBLE FLAT CABLE

1 six claws
2 chuck holder assy (T)

qa insulator
qf filament tape
7 four insulator screws

qg flexible flat cable

qs service, optical (5 core)
device (7G)
qa insulator
qa insulator
qj holder, FFC
8
0
6 belt qk flexible flat cable
(24 core)
qh
3 Insert the thin
wire (clip etc.).

9 connector

qd base, lo assy loading assy (T)

4

5 tray – Bottom view –

‡,QVWDOODWLRQRIIOH[LEOHIODWFDEOH FRUH DQGIOH[LEOHIODWFDEOH FRUH

Note: This illustration sees the loading assy (T) from bottom side.
5 three claws
5 two claws
1 flexible flat cable
(24 core)
loading assy (T)
6 holder, FFC
3 Through the hole
4

terminal face 7 flexible flat cable

(24 core)
2 Through the hole 9 filament tape

Under the guide

(Fold area) 8 flexible flat cable
(5 core)
Under the guide

18
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-9. SMPS BOARD

5 one screw
(+PWH 3 u 8
5 one screw (SUMITITE))
(+PWH 3 u 8 (SUMITITE)) 5 four screws
(+PWH 3 u 8 (SUMITITE))

‡:LUHVHWWLQJ 6 clamp (N)

2 Remove the wires

front side from clamp (N).

4 CN2007
(8P)

3 CN001
(11P)
7 SMPS board

MOTHERBOARD SMPS board

board 1 CN6000
(2P)

– Rear view –

19
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-10. MOTHERBOARD BOARD

Note: When the MOTHERBOARD mounted pc board
is replaced, be sure to refer to “DESTINATION
SETTING METHOD” on page 6.

0 heat sink (MB-L)

7 one screw
7 five screws
(+PWH 3 u 8 (SUMITITE))
(+PWH 3 u 8 (SUMITITE))
‡:LUHVHWWLQJ

8 clamp (N) MOTHERBOARD

board

qa MOTHERBOARD
board

9 two screws
(+BVTP 3 u 8)

2 CN2021 (4P)

6 Remove the wire

3 CN2022 (2P) from clamp (N)
rear side

1 CN2008 (3P)

4 CN002 (2P)

5 flexible flat cable

(9 core) (CN101)

– Rear view –

20
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-11. CHASSIS SECTION, MID HORN REAR-M SECTION

‡:LUHVHWWLQJ
flexible flat cable
qs two screws 5 flexible flat cable chassis (11 core)
(+BVTP 3 u 8) (11 core) (CN9500)
6 two screws
(+BVTP 3 u 8)
6 two screws
qd two screws (+BVTP 3 u 8)
(+BVTP 3 u 8)
qg DC FAN
(3500RPM/200mm)

qf bracket, fan (V73D)

filament tape
9 flexible flat cable rear side
(11 core) (CN8505)
–%RWWRPYLHZ–
qa LED HUB board

‡:LUHVHWWLQJ
0 two screws qh chassis
(+BVTP 3 u 8) section 8 chassis

2 CN8504 (10P) 3 CN8510 4 CN8511

(4P) hole
(5P)
‡:LUHVHWWLQJ
LED HUB board 7 Draw out the
wire from
the hole.

rear side

filament tape
rear side qj one screw
(+BVTP 3 u 10)

1 two filament
tapes

qk four screws
(tapping)
qj one screw
(+BVTP 3 u 10) ql mid horn
rear-M section

– Rear view –

21
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-12. FRONT PANEL SECTION

1 two screws
2 four screws ((4 u 13) (TR-184A))
(tapping)

5 All bosses are removed while moving

jig in the direction of the arrow, and
front panel section is removed.

2 four screws
(tapping)

4 Insert the jig into a space and slowly

remove the front panel section.
Note 1: When using a jig, please work
so as not to injure front panel
section and speaker cabinet.
5 All bosses are removed while moving
jig in the direction of the arrow, and
total eighteen bosses front panel section is removed.

4 Insert the jig into a space and slowly 4 Insert the jig into a space and slowly
remove the front panel section. remove the front panel section.
Note 1: When using a jig, please work Note 1: When using a jig, please work
so as not to injure front panel so as not to injure front panel
section and speaker cabinet. section and speaker cabinet.
3 two screws
(tapping)

4 Insert the jig into a space and slowly

remove the front panel section.
Note 1: When using a jig, please work so as not to injure
front panel section and speaker cabinet.

7 front panel section

Note 2: When installing the front panel
section, remove the used glue
and use a new glue to fix the
panel, front SW.

6 Remove the front panel section

in the direction of an arrow.

22
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-13. FRONT PANEL ST-M SECTION, FRONT PANEL SW SECTION

‡:LUHVHWWLQJ
‡:LUHVHWWLQJ Push the protrusion, and
remove the terminal
Push the protrusion, and (wide side) [blue/black].
remove the terminal loudspeaker 4cm
(wide side [red/black]. (tweeter) (L-CH)
Push the protrusion, and (SP2) top side
remove the terminal
(narrow side) [red].
top side

3 front panel
ST-M section

protrusion
Push the protrusion, and
remove the terminal
(narrow side) [blue].

1 one screw
protrusion (+BVTP 3 u 10)
loudspeaker 4cm
(tweeter) (R-CH) (SP5)

‡:LUHVHWWLQJ
Push the protrusion, and
remove the terminal
(wide side) [red].
protrusion 1 one screw 4 front panel
top side (+BVTP 3 u 10) SW section

‡:LUHVHWWLQJ
Push the protrusion, and
remove the terminal
(wide side) [blue].
protrusion
top side

2 four screws
((4 u 16),
loudspeaker 8cm +BV TAPPING)
(Mid: R-CH) (SP4)
Push the protrusion, and
remove the terminal
(narrow side) [red/black].

–5HDUYLHZ–
loudspeaker 8cm
(Mid: L-CH) (SP1)
Push the protrusion, and
remove the terminal
(narrow side) [blue/black].

23
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-14. REAR CABINET SECTION

1 filament tape
‡:LUHVHWWLQJ
2 two screws
(M4 u 25) filament tape

PARTY RGB-BK
board
rear side

3 four screws
(M4 u 25) 3 four screws
(M4 u 25)

3 four screws
(M4 u 25)

3 four screws
(M4 u 25)

4 two screws 4 two screws

(M4 u 25) (M4 u 25)

6 rear cabinet section

5 Remove the rear cabinet section

in the direction of an arrow.

– Rear view –

24
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

2-15. LOUDSPEAKER (30CM) (WOOFER) (SP7)

‡:LUHVHWWLQJ
Push the protrusion, and remove
the terminal (narrow side)
[grey/black].
loudspeaker (30cm)
(woofer) (SP7)

protrusion 3 terminal
front side (narrow side)
[grey/black]
Push the protrusion,
and remove the terminal
(wide side) [grey].
3 terminal
(wide side)
[grey]
4 loudspeaker (30cm)
(woofer) (SP7)

‡,QVWDOODWLRQGLUHFWLRQIRUWKHORXGVSHDNHU
 FP  ZRRIHU  63

loudspeaker (30cm) terminal position

(woofer) (SP7)

2 Remove the loudspeaker (30cm)

1 four screws (woofer) (SP7) in the direction
((1) (4 u 20), of the arrow.
+BV TAPPING)

1 four screws ((1) (4 u 20),

+BV TAPPING)

25
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL

SECTION 3 For Authorized Servicer

TEST MODE
PANEL TEST MODE
This mode is used to check the screen display panel, LEDs, buttons, COLD RESET
touch keys and GESTURE CONTROL sensor. This mode is used to reset all the user settings to factory setting.
Procedure: Execute this mode when returning the set to the customer.
1. Press [1] button to turn on the system. Procedure:
2. Touch [] touch key and [MIC/GUITAR LEVEL –] touch key 1. Press [1] button to turn on the system.
simultaneously for 3 seconds. 2. Touch [] touch key and [MIC/GUITAR LEVEL +] touch key
3. All LEDs and segments in screen display panel are lighted up. simultaneously for 3 seconds.
This is the display check mode. 3. “COLD RST” appears on the screen display panel. After that,
Touch [N] touch key repeatedly to toggle different display “SONY” appears on the screen display panel. The system
mode as below: automatically turn on and off once. Please be sure that the
Segments on screen display panel: system stay at demo mode finally before switch off the power
All On → 1st Group On → 2nd Group On → All On → All Off supply.
Color of LEDs:
All On → Red → Green → Blue → All Off DISC TRAY LOCK
Mid speakers: When the disc tray does not open and “LOCKED” appears on the
All On → All Off → Left → Right → All Off screen display panel, disc tray lock mode has been activated by the
Woofer: shop front.
All On → All Off → Left → Right → All Off To release from Disc Tray Lock Mode
4. Touch [TUNING – .] touch key, the key check mode is 1. Touch [FUNCTION] touch key repeatedly to select the DVD/
activated. CD function.
5. In the key check mode, the screen display panel displays 2. Touch [MEGA BASS] touch key and [VOCAL FADER/VOICE
“K 0”. CHANGER] touch key simultaneously and hold down until
Each time a button/touch key is pressed/touched, “K” value “UNLOCKED” displayed on the screen display panel.
increases. However, once a button/touch key has been pressed/
touched, it is no longer taken into account. After all the buttons SHOP FRONT DEMO
and touch keys have been pressed/touched, “K” value will The playback started automatically and the “ * DEMO * ” appears
toggle between “OK” and “K26”. on the screen display panel.
The screen display panel displays “<” or “>” or “˄” or “˅” on This is the Shop Front Demo mode which is activated by the shop
the right side of “K26” or “OK” each time swing left, right, up front.
and down at GESTURE CONTROL.
6. To release from this mode, touch the touch keys in the same To release from Shop Front Demo
manner as step 2, or disconnect the power cord. 1. Touch [] touch key and [MIC ECHO] touch key simultane-
ously for 5 seconds.
MODEL, DESTINATION AND VERSION DISPLAY MODE 2. The message “STANDBY” appears on screen display panel. Af-
This mode is used to check the model, destination and software ver- ter that, the screen display panel blinks for a few times and the
sion of the set. system goes to demo mode.
Procedure:
1. Press [1] button to turn on the system.
2. Touch [] touch key and [MIC/GUITAR LEVEL –] touch key
simultaneously for 3 seconds.
All segments in screen display panel are lighted up.
3. Touch [TUNING + >] touch key repeatedly. The following
information appears on the screen display panel in sequence:
Model Name → Destination → Serial Number → System
Control Software Version (SC) → DVD Software Version
(DVD) → Bluetooth Software Version (BT) → Bluetooth
EEPROM Version (BTE) → Touch Sensor Version (TS) →
Gesture Software Version (GES) → Platform Software Version
(PF) → Sub System Software Version (SUB)
4. To release from this mode, touch the touch keys in the same
manner as step 2, or disconnect the power cord.

USER RESET
The user reset clears all data including preset data stored in the data
flash to initial conditions.
Procedure:
1. Press [1] button to turn on the system.
2. Touch [GUITAR] touch key and [MEGA BASS] touch key
simultaneously for 3 seconds.
3. “RESET” appears on the screen display panel. After that, the
screen display panel becomes blank for a while, and the system
goes to demo mode.

26
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL

SECTION 4 For Authorized Servicer

ELECTRICAL CHECK

TUNER SECTION 0 dB = 1 ȝV FOCUS BIAS CHECK

FM AUTO STOP CHECK oscilloscope

(DC range)
signal
MOTHERBOARD board
generator
CN302 pin 17 (RF) +
CN302 pin 1 (GND) –
set
Procedure:
+ 1. Connect the oscilloscope to CN302 pin 17 (RF) and CN302 pin
75 1 (GND) on the MOTHERBOARD board.
– 2. Press the [1] button to turn the power on, and touch the
[FUNCTION] touch key to select DVD/CD function.
3. Set the test disc (CD: YEDS-18) on the tray and touch [N]
touch key to playback.
4. Confirm that oscilloscope waveform is as shown in the figure
Procedure: below (eye pattern).
1. Turn the power on. A good eye pattern means that the diamond shape () in the
2. Input the following signal from Signal Generator to FM center of the waveform can be clearly distinguished.
antenna input directly.
VOLT/DIV: 200 mV
Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz TIME/DIV: 500 ns
Deviation : 75 kHz
Modulation : 1 kHz
ANT input : 35 dBu (EMF) level:
1.1 ± 0.25 Vp-p (DVDSL)
Note: Please use 75 ohm “coaxial cable” to connect SG and the 1.0 ± 0.25 Vp-p (CD)
set. You cannot use video cable for checking.
Please use SG whose output impedance is 75 ohm.

3. Set to FM tuner function and scan the input FM signal with Checking Location:
automatic scanning. -MOTHERBOARD Board (Component Side)-
4. Confirm that input Frequency of A, B and C detected and
automatic scanning stops.

The stop of automatic scanning means “The station signal is

received in good condition”.

CN302

pin 17 (RF) pin 1 (GND)

27
SYS SET
 SMPS Board Diagnosis Flow

28
AC IN
MHC-V73D

(5)
The Power control signal to SMPS board is checked.
Is following power voltage OK? Check whether the state of the Cable and Outlet are normal.
No
If there are no problems, check circumference circuit for
(4)
Main ON Standby Demo mode Power On Main ON on Output of the Motherboard mount side.
2020/06/19 02:21:42 (GMT+09:00)

NO6500:pin9 Low (0V) Hi (3.3V) Hi (3.3V)

(1)
Yes

(3)
The Output from SMPS board is checked.
(2) Is following power voltage up to standard?
No
Replaces SMPS board if it is not up to standard.
Standby Demo mode Power On
NO6500 pin 1,4,5 17.4±5V 17.4±5V 17.4±5V
NO6501 pin 6,7,8,9 58.5±5V 58.5±5V 58.5±5V
Yes
(1) AC input (5) NO6501 connector
(2) Fuse Pin 1 : PGND END
(3) MAIN power transformer Pin 3 : PGND
SECTION 5

(4) NO6500 connector Pin 4 : PGND

Pin 1 : Audio (+17V) Pin 5 : PGND
Pin 3 : Audio (GND) Pin 6 : PVDD (DC+58.5V)
TROUBLESHOOTING

Pin 4 : LED (+17V) Pin 7 : PVDD (DC+58.5V)

Pin 5 : LED (+17V) Pin 8 : PVDD (DC+58.5V)
Pin 6 : LED (GND) Pin 9 : PVDD (DC+58.5V)
Pin 7 : LED (GND)
Pin 8 : AC DET
Pin 9 : Main ON
Pin 10: Network ON
Pin 11: Latch ON
Pin 12: Low / High AC
For Authorized Servicer
Sony CONFIDENTIAL

SYS SET
 Optical Block Diagnosis Flow (1/2)

29
REMOVE SIDE PANEL
MHC-V73D

REMOVE TOP PANEL

TURN ON
TRAY IN
2020/06/19 02:21:42 (GMT+09:00)

Does Optical pickup move to inner circumference? No Checks JL355 for +3.3V and CL308 for +1.2V No Checks IC303 circumference circuit for +1.2V.
(Visual check) REG IC303.
Checks IC009 (JL071) circumference circuit for +3.3V.
Does it output the power voltage of 3.3V and 1.2V?
Yes
Yes
Checks CN402 SL+/SL- signal. No Checks circumference circuit for SL+/SL- of IC401.
Does it output the signal? Checks circumference circuit of IC301 FMO Signal.
Yes
The Sled motor has a problem.
Replaces BU.

Does Spindle motor rotate? No Checks CN402 SP+/SP- signal. No Checks circumference circuit for SP+/SP of IC401.
(Visual check) Does it output the signal? Checks circumference circuit of IC301 DMO Signal.

Yes Yes
The Spindle motor has a problem.
Replaces BU.

Does Optical pickup do focus search? No Checks CN302 FCS+/FCS- signal. No Checks circumference circuit for FCS+/FCS- of IC401.
(Visual check) Does it output the signal? Checks circumference circuit of IC301 FOO Signal.

Yes Yes
The Optical pickup has a problem.
Replaces BU.

A
For Authorized Servicer
Sony CONFIDENTIAL

SYS SET
 Optical Block Diagnosis Flow (2/2)

30
A
MHC-V73D
2020/06/19 02:21:42 (GMT+09:00)

Does laser diode become luminous? No Checks JL306 (LD780) signal. No Checks circumference circuit of Q402.
(Visual check) Does it output 2V when laser become luminous? Checks circumference circuit of IC301 LDO1.
Yes Yes
The Optical pickup has a problem.
Replaces BU.

DISC IN
Yes

Is output level of RF signal JL317 up to standard? No If it is not up to standard,

RF Level = 1.05 ±0.45 Vpp
Lens cleaning is performed.
Test disc (CD: YEDS-18, DVD: HLX-503 (NTSC) or HLX-504 (PAL))
Yes
Yes
Is output level of RF signal JL317 up to standard?
No
RF Level = 1.05 ±0.45 Vpp Replaces BU if it is not up to standard.
Test disc (CD: YEDS-18, DVD: HLX-503 (NTSC) or HLX-504 (PAL))

Yes
Is there no problem with Long term Aging Test (60min)?
Confirms that there is no sound skip. No
Yes
The Optical pickup has a problem.
Replaces BU.

END
For Authorized Servicer
Sony CONFIDENTIAL

SYS SET
 MOTHERBOARD Amplifier Diagnosis Flow

31
1. “PROTECT3” is displayed after turning the power on

“PROTECT3” message is displayed on the display panel after power on.

MHC-V73D

After AC in, while the set still in demo mode, measure DC voltage of pin 1 & pin 9 of CN2007 connector. No SMPS mounted pc board is broken.
DC voltage = (58.5V +/- 3.0V). Exchange SMPS mounted pc board.
2020/06/19 02:21:42 (GMT+09:00)

Yes

Remove SW SPK jack, check impedance of pin 1 & 2 of CN2022 connector. No IC2002 is broken and cannot be replaced.
By refering to GND, the impedance value is measured. Impedance > 100 kilohms? Exchange MOTHERBOARD mounted pc board.

Yes

Remove mid SPK jack, check impedance of pin 2 & 4 of CN2021 connector. No IC2002 is broken and cannot be replaced.
By refering to GND, the impedance value is measured. Impedance > 100 kilohms? Exchange MOTHERBOARD mounted pc board.

Yes

END

2. No sound from speaker

When playback music, there is no sound can be heard from speaker box.

Yes

By using oscilloscope, check I2S audio signal at test pin CL2020 (pin 24) & CL2035 (pin 25) of IC2001. No
Exchange MOTHERBOARD mounted pc board.
Can capture I2S audio signal?
Yes

By using oscilloscope, check PWM audio signal at pin 39, 41, 48, 49 of IC2001. No IC2001 is broken.
Can capture the PWM audio signal? Exchange IC2001.

Yes

Still no sound from speaker box when playback music? No

Yes

Exchange MOTHERBOARD mounted pc board. END

For Authorized Servicer
Sony CONFIDENTIAL

SYS SET
 Switch Keyboard Diagnosis Flow

32
1.) AC In, [1] button no response.
2.) Power On, [TAIKO] button no response.

Yes Disassemble POWER‐KEY mounted pc board from TOP PANEL ASSY Yes Switch keyboard broken.
[1] / [TAIKO] button feel hard when press.
MHC-V73D

SERVICE (V73D), S8450/S8452 switch keyboard feel stuck when press? Replace switch keyboard.
No
Yes BUTTON, POWER is broken and
Assemble back POWER‐KEY mounted pc board from TOP PANEL ASSY SERVICE (V73D).
cannot be replaced. Exchange TOP
Do [1] / [TAIKO] button still feel hard when press? PANEL ASSY SERVICE (V73D).
2020/06/19 02:21:42 (GMT+09:00)

No
No
End

Yes Check 100543811 FLEXIBLE FLAT CABLE (5 CORE) / 100544011 FLEXIBLE FLAT CABLE (25 CORE). Yes AC cut, re‐insert FFC(s)
[1] / [TAIKO] button no response when press. Does it slanting/ not fully insert? and try again.
No
Check 100543811 FLEXIBLE FLAT CABLE (5 CORE) /100544011 FLEXIBLE FLAT CABLE (25 CORE). Yes
Replace broken FFC(s).
Does it broken/ conducting pin peel off?
No
Check FFC connectors (CN8450/CN5403/CN5401/CN126). Yes Replace broken mounted
Does it broken by visual check? pc board(s).
No
In AC cut condition, press switch keyboard and check resistance.
[1] button: CL8455 & CL8453 (GND) Yes Switch keyboard broken.
[TAIKO] button: CL8454 & CL8453 (GND)
Replace switch keyboard.
*Check multimeter probe resistance (+ & ‐) and compensate to final reading.
Does it show reading out of the range between 0~1 ohm?
No
No
In AC cut condition & all FFC connected condition, check switch keyboard resistance.
[1] button: CL8455 & CL8453 (GND) IC109 is broken and cannot be
Yes
[TAIKO] button: CL8454 & CL8453 (GND) replaced. Exchange MOTHERBOARD
Does it show reading out of the range between 12~13 kilohms ([1] button) / mounted pc board.
17~18 kilohms ([TAIKO] button)?
No
In AC in condition & all FFC connected, measure voltage supply on switch keyboard.
Yes IC001 is broken and cannot be
[1] button: CL8455 & CL8453 (GND)
replaced. Exchange MOTHERBOARD
[TAIKO] button: CL8454 & CL8453 (GND)
mounted pc board.
Does it show reading out of the range between 3.2~3.4V?
No

Perform “COLD RESET” by touching [x] and [MIC/GUITAR LEVEL +]

touch keys simultaneously for 3 seconds.
For Authorized Servicer
Sony CONFIDENTIAL

End Re‐check the flow.

SYS SET
 Tuner DAB Diagnosis Flow

33
Turn On
MHC-V73D

1.) Default “TUNER/DAB” function.

“OFF‐AIR” is displayed on the screen display panel. Check FFC connection between DAB module & Re‐insert FFC and check again.
Yes Yes No
or MOTHERBOARD board CN600. Does it displayed “NO LABEL” / End
2.) Switch to “TUNER DAB” function. Does it slanting or not insert properly? “OFF‐AIR” again?
2020/06/19 02:21:42 (GMT+09:00)

“NO LABEL” is displayed on the screen display panel.

No
Check CN4502 / CL4530. Yes
Does it output the power voltage of 5.1V? Yes
No The DAB module have problem.
Replaces DAB module.
Check USB function Playback.
No Yes
Does it read file stored inside USB?
No
Checks circumference of circuit of MOTHERBOARD
board IC007.

1.) “SCAN 10%” ĺ “SCAN 100%” ĺ “NoSIGNAL” is

displayed on the screen display panel. Yes Check DAB Antenna wire connection.
or Does it fully insert? Yes
2.) DAB channel name “XXXXXX” ĺ “OFF‐AIR” is No
displayed on the screen display panel.
Check DAB Antenna connector pin. Yes The DAB module have problem.
Does it bent? Replaces DAB module.
No No
Re‐insert DAB Antenna wire and check again.
Yes
Does it displayed “NoSIGNAL” / “OFF‐AIR” again?
No
End

The sound is not Check sound output from other function (USB/CD/DVD/ Check CN4502 PIN11 / CL4529 for Check circumference circuit for
Yes Yes Yes
outputted. Audio In/BT). I2S DATA signal. MOTHERBOARD board
Does the sound outputted? Does it outpout the signal? IC904 & IC905.
No No
Refer MOTHERBOARD Amplifier Diagnosis Flow. The DAB module have problem.
End Replaces DAB module.
For Authorized Servicer
Sony CONFIDENTIAL

SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL

SECTION 6 For Authorized Servicer

DIAGRAMS
6-1. BLOCK DIAGRAM - RS SERVO, USB, TOUCH, HDMI Section -

CD RF AMP
FOCUS/TRACKING ERROR AMP
CD SYSTEM PROCESSOR
DIGITAL SERVO PROCESSOR
IC301
(1/2)

CN1000
DATA2+
TX2P 94 1
RF 119 RFIP DATA2–
TX2N 93 3
DATA1+
TX1P 91 4
DATA1–
TX1N 90 6
VOA/A 125 RFC DATA0+
TX0P 88 7
VOB/B 124 RFB DATA0–
TX0N 87 9
VOD/C 123 RFA CLOCK+
TXCP 85 10 HDMI OUT
VOD/D 126 RFD CLOCK–
TXCN 84 12 (TV) ARC
SCL (5V)
HDMI_SCL 28 15
SDA (5V)
HDMI_SDA 29 16
HOT PLUG DET
VC 5 V20 GPIO10/HPLG 81 19
+5V POWER
+5V 18
PD 8 MDI1 XTALO 4 13
X301 ARC BUFFER 14
27MHz IC1001
XTALI 3 3A 6
AUTO
3Y 2 >001B
FE_LD_CD (780) POWER CTRL 128 FE_CD_IOP-RFF
2A 3
Q402 9 LDO1
2Y 5 ARC_SPDIF MAIN SECTION
(Page 35)
AUTO USB SWITCH
FE_LD_DVD (650) POWER CTRL 127 FE_DVD_IOP-RFE IC453 CN8201
Q401 10 LDO2
D+ 3
USB_DM 20 4 HSD1- D+ 1

D- 2 REC/PLAY
USB_DP 19 5 HSD1+ D- 2
SERVICE, OPTICAL

HSD2+

HSD2-
DEVICE (7G) VBUS 1 5V 1A

S
CEC DATA SWITCH
Q1000 ~ Q1002, Q1005 7 6 10

(LO:DVD,HI:CD)MSW 18 MSW 151 150 106

USB-HOST-SEL
DM0
DP0
CD_VR(780) 14 CD_VR
EEPROM
IC302 USB HI-SIDE SWITCH
DVD_VR(650) 15 DVD_VR IC452

SF_CS_ 24 1 CS
VBUS-OE/SD_WP_0 112 3 EN OUT 6
SF_DO 25 2 DO(IO1)
SF_DI 26 5 DI(IO0) USB-OC/SD_LED0 35 4 FAULT IN 1 USB+5V
5CH SYSTEM
SF_CK 27 6 CLK 10 CEC-IN (DVD)
MOTOR DRIVER
IC401 64M SDRAM 15 CEC-OUT (DVD)
IC306
TOUCH CONTROLLER
FCS+ 14 FOCUS IC5202 PARTY LIGHT
1 17 FOO SYSTEM WIRELESS PARTY CHAIN
FCS– 13 COIL DRIVER
CONTROL

UDQM
LDQM
DQ0 – DQ15 A0 – A11 MEGA BASS
IC109 (1/4)

RAS
CAS
CLK
BA0
BA1

WE
TRK+ 16 FOCUS FIESTA
4 12 DMO 2, 4, 5, 7, 8, 10, 11, 13, 42, 23 – 26,
TRK– 15 COIL DRIVER 20 21 38 15 39 18 17 16 PAIRING BLUETOOTH
44, 45, 47, 48, 50, 51, 53 29 – 34, 22, 35 TOUCH-INT1 51 2 EXTCLK/PA3
GESTURE ON/OFF
SL+ 17 TOUCH-NFC_SDA 130 20 PA1 FUNCTION
FOCUS
23 13 FMO
SL– 18 COIL DRIVER PLAYBACK
TOUCH-NFC_SCL 129 1 PA2
41 – 48, 58 – 53, 75 – 78, 67 – 62, DJ
72 73 60 49 59 70 69 68
51 – 50 74, 61
SP+ 11 FOCUS N
BA0
BA1

RCLK

DQM0
DQM1
RAS#
CAS#
RWE#

PA4, 6, 7, PB0, 1, 4, 5,

5, 7, 8, 9, 10, 13 – 18
26 16 TRO RD0 – RD15 RA0 – RA11
SP– 12 COIL DRIVER x

PC0 – PC3
SAMPLER
IFSDI 35 22 MTK-SDO KARAOKE
BIAS 27 6 V14 IFSDO 38 20 MTK-SDI TUNING - .
IFSCK 37 17 MTK-CLK TUNING + >
MUTE 28 108 MUTE Z
PRST_ 32 14 MTK-RESET SOUND FIELD ‡6LJQDOSDWK
IFCS_ 34 19 MTK-XIFCS VOLUME + : AUDIO DIGITAL
CN303 GPIO13 36 104 MTK-BUSY VOLUME -
MIC/GUITAR LEVEL + : VIDEO
LOAD-
1 9 VOTR- MIC/GUITAR LEVEL - : CD PLAY
LOAD+
CONNECT TO 2 10 VOTR+ 8 CD-MOTOR+ MIC ECHO
FWD 6
MS-476 BOARD 3
TRAY-IN : USB
TRAY-OUT REV 7 3 CD-MOTOR- VOCAL FADER
5 VOICE CHANGER
GUITAR
12 CDM-LOAD0-SW
13 CDM-UNLOAD-SW

MHC-V73D
34
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-2. BLOCK DIAGRAM - MAIN Section -

J2000
AUDIO
IN

MIC AMP
IC8200 STEREO A/D
CONVERTER
6 IC609
J8200
3 1 5 7 13 VINL
MIC1
14 VINR
9 DOUT
7 LRCK
J8201 8 BCK
MIC2 6 SCKI
STEREO A/D
GUITAR CONVERTER
SWITCHING IC904
CONTROL
Q8200~Q8202
VINL 13
VINR 14
EXCEPT AEP STEREO A/D
CONVERTER LRCK 7 9 MPIO_C2/ALRCK_I1
FM DRIVER IC606 BCK 8 8 MPIO_C1/ABCK_I1
(FM RECEIVER) DOUT 9 10 MPIO_C3/ADIN_1
IC902

SCKI
CN900 IIC/RDSI 6 6

FM CK 8
2 1 FRF1 109
ANTENNA DA 11
SIGNAL

ACLK
CD RF AMP
SELECTOR FOCUS/TRACKING ERROR AMP
IC905 CD SYSTEM PROCESSOR ALRCK 114 29 RXIN6/ALRCK_I0
DIGITAL SERVO PROCESSOR
LRCK/LOUT 13 2 1A IC301 ASDATA0 115 28 RXIN7/ADIN_0
(2/2) ABCK 110 30 RXIN5/ABCK_I0
BCLK/ROUT 12 5 2A
16 X1 IISD 14 11 3A
X900
12MHz
17 X2
25 MC/SCL
24 MDI/SDA
>002B
DIN0
MCK AMP
AEP 2Y 7 12 MPIO_B1/ABCK_I2 BCK SECTION
1Y 4 13 MPIO_B2/ALRCK_I2 LRCK
CN4501 (Page 36)
3Y 9 14 MPIO_B3/ADIN_2
12 >001B
40 XTO
11 X602 RXIN3 32 ARC_SPDIF

ERROR/INT0
RS SERVO, USB, TOUCH,

NPCM/INT1
3 1B 24.576MHz
9
6 2B
39 XTI HDMI SECTION

DOUT
LRCK
TO DAB

BCK
RST
10 3B SELECT 1 (Page 34)
CN4500 1 2 17 18 19 34

5 108 45 83 52 120 114 126 125 42 41 28 26 24 38 33 30 29 43

6
BT-TUNER-SEL
ST-RDS
MIC-DET
GUITAR-DIST
GUITAR-BASS
MODE-SEL

SSI0_DI(MIC)

SSI0_LRCKO
SSI0_BCKO
AUDIO-CLK-OUT
DIR-RESET/SD_LED1
DIR-INT0
DIR-INT1
SSI3-DI
SSI3_LRCKO
SSI3_BCKO
DIR-TUNER-SDA
DIR-TUNER-SCL

CP3000 115 DAB-TXD SYSTEM CONTROL

BLUETOOTH MODULE 117 DAB-RXD IC109 (2/4)
BT-RESET/SD_CD_0
BT-RXD(MD-CLK)

RFS0 2

Q-Flash-SIO1
Q-Flash-SIO2
Q-Flash-SIO0

Q-Flash-SIO3
Q-Flash-CLK
SCLK0 3

Q-Flash-CS
AUDIO-X1

AUDIO-X2

DT0 4 ‡6LJQDOSDWK
USB-X1

USB-X2
EXTAL
BT-ON

XTAL

CP IC HCI_RXD 19 133 BT-TxD

IC3000 : AUDIO
MFB 26 164 MFB
65 16 113 70 71 91 92 139 140 169 172 166 170 168 167 : TUNER (FM)
SCL A1 15 CP_SCL
SDA B1 16 CP_SDA : AUDIO DIGITAL
X105 X103 X104
BUS BUFFER 13.333 MHz 12.288MHz 48MHz : MIC
1 2 3 5 6 7
IC102 (1/2)

CS
DO(IO1)
WP(IO2)
DI(IO0)
CLK
IO3
HCI_TXD 20 5 2A 2Y 6
RESET IC
IC3001
BLUETOOTH
RST_N 13 4 OUT VDD 2 POWER CONTROL
Q103, Q104 EEPROM
IC106

MHC-V73D
35
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-3. BLOCK DIAGRAM - AMP Section -

STREAM PROCESSOR DIGITAL POWER AMP

IC2001 IC2002
L2002
PWM_P_4 49 5 INPUT_A
OUT_B 35
SW
PWM_M_4 48 6 INPUT_B
L2002
PWM_P_2 41 14 INPUT_C OUT_A_39 39
PWM_P_1 39 15 INPUT_D
OUT_A_40 40

VALID 37 4 RESET
L2003
16 FAULT OUT_C 32
L-CH

17 OTW

L2003
OUT_D_27 27
R-CH

OUT_D_28 28
DIN0
>002B 27 SDIN4
MAIN MCK
11 MCLK
SECTION BCK
23 SCLK
(Page 35) LRCK
22 LRCLK

25 SDIN2
24 SDIN1
21 SCL
20 SDA M+5.2V
16 RESET
19 MUTE FAN DRIVER
Q2006

M+13.5V CN2008
DC FAN
FAN RESET
SWITCH FAN DRIVER
Q2005 Q2000

FAN PROTECTION
(LOCK)
Q2009
40 54 131 132 53 57 49 78
SSI2-DO(FR)
SSI1_DO(WF)
PWM_SCL
PWM_SDA
/AMP-RESET
DAMP-MUTE

/SD-FAST

AMP-PROTECT

SYSTEM CONTROL
IC109 (3/4)

‡6LJQDOSDWK
: AUDIO
: AUDIO DIGITAL

MHC-V73D
36
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-4. BLOCK DIAGRAM - PANEL, POWER SUPPLY Section -

DIN 4 FL-SOUT
CLK 2 FL-CLK
VACUUM STB 176 FL_LATCH
FLUORESCENT FL+12V
DISPLAY VIN
PROTECTION CONTROL
ND8000 PCONT-DAMP 118
S8450 Q576
POWER CONTROL
PROTECTION
Q8000 6 POWER-KEY

PROTECTION CONTROL
POWER CONTROL M+5.2V Q575
S8452
F+ PROTECTION
Q8001 TAIKO 84 AD-KEY0/TAIKO-KEY

REMOTE CONTROL SPM-C-MON 79 PROTECTION CONTROL

RECEIVER 135 SIRCS Q574
IC8400

GESTURE CONTROLLER
PROTECTION CONTROL PROTECTION CONTROL
IC5300 C-CONT 55
Q571 Q572
GESTURE CONTROL
TRANSMITTER 25 TXD

GESTURE CONTROL +1.2V REG. POWER CONTROL

4 RX0 EIO0 12 111 3D-DETECT/SD_D1_0 IC303 VOLTAGE REGULATOR +3.3V PROTECTION
EAST ELECTRODE SMPS
IC009 Q110,Q111
GESTURE CONTROL EIO4/SI0 20 128 3D (GESTURE)_SDA
5 RX1 +3.3V REG.
SOUTH ELECTRODE +1.2V 1 VO VCC 6 IC001
EIO5/SI1 21 127 3D (GESTURE)_SCL D2 1
+3.3V 5 S1
GESTURE CONTROL 103 3D-RESET/TEST-MON103/SD_D2_0 D1 4 E+3.3V 3 SW
6 RX2 MCLR 24
WEST ELECTRODE IN 2
POWER CONTROL D+3.3V 8 S2 VDD 6 1 PG MAIN-ON
GESTURE CONTROL PROTECTION
NORTH ELECTRODE 7 RX3 Q304,Q305 +1.2V REG.
IC003
3 ON1
2 ON2 1 PG IN 2
E+1.2V 3 SW
LED DRIVER LOW_AC/PCONT-BTSTBY
IC5002 +5.2V REG.
IC8501
OUT0 SIN 2 137 RGB-SOUT
5 - 10

D5006~D5007 I PCONT-BTSTBY 122 6 EN

OUT5 SCK 3 134 RGB-SCLK IN 2
PROTECTOR 82 1 PG
TRANS 4 94 RGB-TRANS-PNL-LED
DCDC5.2V 3 SW
OUT10 PWMCLK 21 136 RGB-PWM-CLK POWER CONTROL
15 - 20

D5000, D5008 I +5.2V

SOUT 22 PROTECTION
OUT15 Q013 +5.2V REG.
IC005
LED DRIVER
IC5301 POWER CONTROL POWER CONTROL M+5.2V 3 SW
PROTECTION PROTECTION IN 2
Q010 Q006 6 EN
OUT0
5 - 12

D5307~D5310 I SIN 2 SYSTEM CONTROL 1 PG

OUT7 SCK 3 IC109 (4/4) POWER CONTROL
+5V AEP
TRANS 4 POWER CONTROL PROTECTION +5.1V REG.
OUT8 IC007
13 - 19

PWMCLK 21 PROTECTION Q007 +3.3V REG.

D5001~D5003 I Q302, Q303 IC4500
OUT14 1 PG
+3.3V 1 VO 6 EN IN 2 M/D_+17.5V
LED DRIVER VCC 8
MTK-POWER-CTRL 59 1 CONT +5V REG. 5 EN
IC8504 VIN 5
EXCEPT AEP E+5.1V 3 SW
+5V 4 VOUT IC1000
OUT0 SIN 2 +3.3V REG.
5 - 14, 19 - 20

I IC903 A+13V_AMP
SCK 3
D9252~D9253 OUT9
TRANS 4 +3.3V 3 VOUT POWER CONTROL
OUT14 VDD 4 +5V REG. +9V REG.
PWMCLK 21 PROTECTION A+17.5V
I IC006 IC004
ST-CE 44 1 CE Q004
OUT15 SOUT 22
+12V REG.
LED DRIVER IC2000
IC8506 POWER CONTROL
PROTECTION
SW_12V OUT IN
SIN 2 Q014

OUT2 SCK 3
PCONT-PSAVE-PROTECT 60
7 - 20

D9000, D9103, D9300~D9301 I TRANS 4

D9350~9351 OUT15 PWMCLK +12V REG. PROTECTION POWER CONTROL TO
21 NFC PVDD
IC002 V1
SWITCH PROTECTION AMP
SOUT 22 IC001
Q012 Q011 SECTION
SW+12V OUT IN
LED DRIVER NFC-INT 110 IRQ
1
IC8503
TOUCH-NFC_SDA 130 5 SDA
+13.5V REG.
SIN 2 TOUCH-NFC_SCL 129 6 SCL IC2003
OUT2 SCK 3 NFC-RF-DET 56 7 RFDET
7 - 20

D9100~D9103 BUS BUFFER

I TRANS 4 (AC IN)
M+13.5V OUT IN IC102 (2/2)
OUT15 PWMCLK 21
RESET IC 1 1G
SOUT 22 IC103
4 2G
SPM-AMBIENT-TEMP 80 TH571
LED DRIVER OUT 4 10 3G
4A 12 AC CUT SWITCH AC-DET
IC8505
13 4G Q107
OUT0
5 - 10

D9100~D9102 SIN 2 RES 76

I
OUT5 SCK 3 AC-CUT(MD-BOOT0) 63 11 4Y
TRANS 4
OUT8 LOW-AC-DET 32 LOW/HIGH AC
13 - 18

D9151 I PWMCLK 21
LATCH-ON 27 LATCH ON
OUT13

MHC-V73D
37
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-5. BLOCK DIAGRAM - SMPS Section -

LOW/HIGH AC
SWITCH LOW/HIGH AC
Q6509

TH6000 F6000
RECT CN6000
D6000 (AC IN)

RECT
D6001

DETECT AC-DETECT
ISOLATOR AC_DET
SWITCH SWITCH
Q6307 PH6300
Q6500
CONVERTER
TRANSFORMER
(MAIN) POWER CONTROL
T6300 IC6300

RECT 8 HV
V1
D6504
TH6300
1 LATCH

SWITCHING OVERLOAD
RECT
+13V TRANSISTOR PROTECTION 5 DRV
D6501
Q6300, Q6301 Q6302, Q6303

OVERLOAD
PROTECTION 6 VCC
Q6304

ISOLATOR DETECT OVERLOAD

PH6302 SWITCH PROTECTION 2 FB
Q6305 Q6306

SHUNT REGULATOR
IC6500

2 VREF K 1 ISOLATOR
PH6301
LATCH ON
SWITCH LATCH ON
Q6507

NETWORK ON
SWITCH NETWORK ON
Q6501

MAIN ON
SWITCH MAIN ON
Q6504

MHC-V73D
38
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

• Note for Printed Wiring Boards and Schematic Diagrams • Circuit Boards Location

Note on Printed Wiring Board: Note on Schematic Diagram:

• X : parts extracted from the component side. • All capacitors are in μF unless otherwise noted. (p: pF) 50 V or VFD board
• : parts extracted from the conductor side. less are not indicated except for electrolytics and tantalums. NFC board
• : Pattern from the side which enables seeing. • All resistors are in  and 1/4 W or less unless otherwise specified. SENSOR board
(The other layer’s patterns are not indicated.) • f : Internal component.
• 2 : Nonflammable resistor.
Caution: • 5 : Fusible resistor. MIC-USB board
Pattern face side: Parts on the pattern face side seen from • C : Panel designation. POWER-KEY board
(Conductor Side) the pattern face are indicated.
Parts face side: Parts on the parts face side seen from the Note: The components identified by mark 0 or dotted line with
(Component Side) parts face are indicated. mark 0 are critical for safety. DAB board
Replace only with part number specified. IR board (AEP)
• MOTHERBOARD board is multi-layer printed board. However,
the patterns of intermediate layers have not been included in • A : B+ Line. SMPS board
MOTHERBOARD board
diagrams. • B : B– Line.
• Indication of transistor. • H : Adjustment for repair.
EXTENSION board
• Voltages and waveforms are dc with respect to ground under
C no-signal (detuned) conditions. LED HUB board
Q These are omitted. no mark : TUNER
PARTY LED-LR board
( ): CD PLAY
B E { }: DVD PLAY PARTY RGB-BK board
[ ] : USB
< > : Bluetooth
D * : Impossible to measure MS-476 board
• Voltages are taken with VOM (Input impedance 10 M).
Q These are omitted.
Voltage variations may be noted due to normal production
G S tolerances. HORN LED board
• Waveforms are taken with a oscilloscope. PARTY LED-LR board
Voltage variations may be noted due to normal production
Q tolerances. SW LED-L board
• Circled numbers refer to waveforms.
• Signal path.
B C E
F : AUDIO
These are omitted. f : TUNER (FM)
L : CD PLAY
Q E : VIDEO
d : USB
J : AUDIO DIGITAL SW LED-R board
B C E N : MIC
These are omitted.

PARTY RGB-FR board

Note 1: When the MS-476 board is defective, exchange the
entire LOADING COMPLETE ASSY (T).

Note 2: When the SENSOR board is defective, exchange the

TOP PANEL ASSY SERVICE (V73D).

Note 3: When the MOTHERBOARD mounted pc board is

replaced, be sure to refer to “DESTINATION SETTING
METHOD” on page 6.

MHC-V73D
39
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-6. PRINTED WIRING BOARD - MOTHERBOARD Board (Component Side) - • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
MOTHERBOARD BOARD
(COMPONENT SIDE)
A ™ EXCEPT AEP
‘ AEP
J2000
AUDIO
IN

CN1000
FOR SERVICE
ONLY HDMI OUT
(TV) ARC V

(CHASSIS)
JL057
8 7
21 22
C048
Q2005 CN108
R2016
E1 B1 C2 6 1 JL013
R2014
R2017 23

R2087
Q2005 20
C1 B2 E2 1 19
R2015
B R2084
R2085

R101
MIC-USB BOARD
E (CHASSIS)

Q2006
L1001 L1002 R1011 C1006
JL604 JL605 R1020
‘
CN8200
‘
R1000

R1019
C650
C647
(Page 46) D2002 D2000

11

11
A RB303

10
10
K AK

R671
R662
RB305
JL332

RB302
A K
R663 R669
>001P

R367 R319
D2015

R370
>004P

RB304
JL331

27
28
C407

C641 C643
C401
C403

C941

RB301
C402

CN600

CN600
C640
C411

C938 97
96 65
64

FB610
R415

C600
DAB BOARD
R408 R683 R365 R379
C648

C943
R687 R380
R401
R418

C413

R402

2
R661

IC903
IC301 (AEP)
2 8
RB306

1
R678

R673
C CN902 R690
Q010

RB307
R674

1 9

CN4502
R688 R369
R360

IC306
R358
R030

C687
RB308

C639
IC606
(Page 50)
R691 R601 R604
D402 C337
FB603 R602 R349
D401

C064

R345
5

5
JL050
128
CN303

CONNECT TO

4
4

CN303
2

R344
8 33
C656 RB309
C066

MS-476 BOARD C646 1 32

CN902
R404
2

2
C659

R355
1 9
1

1
C658

R331
R334
R409

R354

R356
R332
R998
R716

C667

R342
C992

R327
R301
C672

1
R340

54
E
R709 X301
R711

R917

C366
CONNECT TO C419 C673 FB321 FB320

C367
R410 Q013

R435

R470
R472
SERVICE OPTICAL DEVICE (7G) C418
C666

C322
C674

R708 C303
C986

IC609

C362
D CL415 C323

R434
R028

C675

FL301

R431
C423
24 2
C678

R432
R412
4 1
CN302

C467
IC453
C671

6
6 5 23 1
CL414

C421 C420
CONNECT TO R723 R421
R720
R722
R719

CN402
R024
R021

R422 R450

1
SERVICE OPTICAL DEVICE (7G)
R794

R318
C302
C046

R023 R310

CN451
R057
>005P
R959

C022
C726

R018 C468
24 2 C026
C025

5
23
CN302
1
IC005 C027 37
36 25
MIC-USB BOARD

7
C951

24
X602
R953

R952
CN8202
C020
C023

R041
R032

R221
R224
R226
R957
C021 R950
C030
R010

TH571
C141
(Page 46)

R577
C952

R951
R955

IC904

R232
R986
E
L003

C047

13

R229
48
C963

R251
1

R520
12
C954 C139
R658

C985
C981
R058

R213
R211
R985

R219
R218
R150
R193
R201
R205

R242
R038 C040
R982

R257
JL503
L011

R664 R517 C143

R026

R155
R295
R981

C039

R254
R665 R261
C142
C037

R181

R299
R984
R983

C038
R657

R660
IC007 C006
R001

R270
L004 C028 44 1
C007 45 176 R209
C029 R247 R272
C016 R008 IC004 R197 R289
R234 R168
C001

R293
C003
C002

R055

R172 R169
L001 R007 R288
IC001

C035 R292
R173 R290

R208
R781

R005 R047
R006

C005 C051
F R511
R151

C085
R143
R014

C080 R285
R266
R2096
R2009

IC109
R2008
R2007
R2006
R2023
C019
C018

R784

C297
R056

C298
C126
C036

R186

C2021 JL295
R188
R015

IC905

C127

C015 JL296
R077 R156 C151
C654

(CHASSIS) R013 C096 R779 X105 R149

C017 R275
R147
C004

JL053 IC003 R104 R164

C076

R2004 R184 R161

R782
R783
R2003

L002 R049 C152 X104

C014

C013
R146

R160
R923

C2108 R167
R183
C166

R278
R2138

R267
C129
R185
R2011

88 133
89 132
R158 R531 R264
FB101

C2008
C128

R133
R190

C2015 R145
>006P
C130 R280
R204

C093
R166

R132

28
R236

R2010 1 R196
G ‘
R200

R509
R206

R121
R392 R130
R223

R550
R548
R202

R228

X103
C132

R233

R547

SENSOR BOARD
R212
C024

R549

FB110

IC2001 C169
R227

C299
R238

C165

FB106
29 56
CN5301
R225
R220
R198

C011
R391

C124
(Page 43)
R2143

C2010 C2020
C2028

R191

CN120
R277
R271

C010
1

C525
R2152
R2118
R2093

C092
2

R279
1
R268

C091
2

R2142
R179

FB138
R2046
C2026

R2034 R2031
C2027
FB107
6
C2036

IC2002 >007P
R2042

C2032
7

>002P R2044
C2024
C2025

22 1

SENSOR BOARD
1

SMPS BOARD
13

H
2
CN126

CN5401
A
C2099 C2039

C2098 C2038
11

R571 D571

NO6500
CN101
C284

C573

(Page 43)
23 44
K

(Page 44) R2051‘ E R572

C577

Q571 FB124
R2052 C2043 C2042
8

C2152 C2153
C2054
A K FB127
9

C2055
‘ C2052 D572
C2051
FB102

C2100 C2097
C008

R2053 R003
C065

R2049
JL002
>008P
CN001

FB104 FB103
FB105

LED HUB BOARD

24
25

IC002
CN8503
I
R027

JL055
C033 (Page 49)
L2003

L2002
1
12

C2023

CN002
C186
C185
9
9

C2058
C2067

C2059 C2069 C2071 3 4 (CHASSIS)

C2060 C2063
CL3012
CL3039
CL3038
CL3037
CL3036
CL3035
CL3034
C2068

1 2
C184
C182
R2076

D2001
CL3033
CL3016
CL3015

>009P
R2024 D2014

J
C2016 R2025

R3004
C2133

>003P
C2163

LED HUB BOARD

R2199

R3005

R3003

IC3000
CN2007

CN2007

C2076

C3000
CL3014
CL3013
C2159

R3022

CN8500
CL3011

R3020
R3021

SMPS BOARD
CL3031

Q2009
CL3032
R2176

(Page 49)
E CL3019
R2169
NO6501 R2171
R2170

(Page 44) R2175 R2174 CL3020

CL3026
C3004
1

R2173 R2172 CL3027

CL3028
C2134

CL3023
CP3000
3 1
R3046

K DC FAN 5
CN2008
4

C2079 CL3030

R3048
Note 1: When the MS-476 board is defective, exchange the
C2084
entire LOADING COMPLETE ASSY (T).
4 1 2 1
JL056 CL3022
CL3051

CL3056
CL3041
CL3042

CL3054
CL3049

CL3050

CL3052

CL3055

CL3057

C2095
CL3043
CL3045

CL3048
R3049

CL3024
CL3029
CL3040
C2090

C2161 C2162 R071

CL3046
CL3047

11 Note 2: When the MOTHERBOARD mounted pc board is

(11) replaced, be sure to refer to “DESTINATION SETTING
(CHASSIS) L+ R+ SW- SW+ (CHASSIS) 1-003-971- METHOD” on page 6.
CN2021 CN2022

MHC-V73D
40
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-7. PRINTED WIRING BOARD - MOTHERBOARD Board (Conductor Side) - • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

MOTHERBOARD BOARD
A (CONDUCTOR SIDE)
™ EXCEPT AEP
™
FM
ANTENNA
‘ AEP

4 3

CN900
JL101 2 1

IC1000
C1005 R1026 CL601

C2116
JL900

IC1001C1009

C2128
C1013 JL110
JL102 JL901

C2115
R1024

R2146
C1010
JL1003

C1003
R2147
JL148 CL2011 CL2010

A
D905
R1023 R1022

D900
JL607 R2013

A/K
R937 CL600

C930 L900
JL111
B

C1004

K
CL413

IC2003
K/A

C932
R1027
R1017
R1025 Q2000

R1010
JL609

A
L901

C934 C933 L605

R940

R411 C2018 C2017

JL612

C1011

L902
Q303 ‘ JL611 C931

X900
R684
Q302
E
C364

CL380
R682

R939
JL635

R605 R606
R359

R944
C306 JL2031

C936
CL395 JL364 JL610

C2127
C348 C351 R681
IC902

C352
CL307 CL401

C375

28
1
C346 JL608 JL603 CL402
JL614

R857
JL021 CL408

R680
R309 R943

C347
C343
C966 CL404
C359

JL330
R382

R947
CL409

R312
C321

R303 R302 CL308 C350 R321 CL311 JL606 JL602 CL403

R381

R945
CL310 R946 C991 JL023 CL405

22
C344

7
C315

IC303

R785
C341

C340
C339
JL615 JL022

IC401
CL316
R307
R308
R306
C360

R311

R325
JL601 R313
C372

JL910

R677
C342CL328 R314

29

30
CL313 C695 C406
JL616

C404
C C369 CL309

C409
R351 JL909
R339
C334
C338
CL315

R328
C373 C405
C357 C649 JL329 CL410
C365

JL355 CL329 JL908

R792
JL613 C653
C326

21
8
C331

C328
L301 C655 JL328 CL411
R378
C358

R348 C325 JL326 C408

R330 C330
C363

R352 JL323
C336

15
14
JL362 JL359 C319 JL324
C316
R305

C311
JL361 JL304 JL322
Q304

JL302 JL310 JL321

E

JL358
R304

JL320 JL306
IC302

JL319

IC009
JL357 JL308 JL2033
JL360 JL312

C056
R498

C070
JL356 JL315 JL313

C069
JL314
C324

E JL305

C664
JL316
R424

Q305 R329 R453 C055 R037 JL405 JL401

C067
R335
R316

R323 JL317
C466

JL463 JL307 JL303 R034

R429

JL309

C074
JL406
D JL460
FB455 JL462 Q401 E
JL402
R389

IC452

Q007
E
JL301 JL071
C463 R451 JL318 JL311
JL461 R478 Q402 FB013

C071

R039
C424
C073

R637

E
C462 R988 JL133 R062

R061
FL601
R040

L006
R987 C958
JL007
E
E E Q006
Q104
R989
C949

C950 Q103

C150

C162
D1001 C960 JL006
Q1002

R113
R230
R148

R1006

R004
R1002 R1005
R1007

JL327 JL325
R174

A K
R1003 Q1005 JL072
E

JL294 R273
Q1000

R110
E

E
R514
E C1000 R171 R529
Q1001 C1001

R215
C501

JL212 L007
R512
E
R1004

R513

JL524 C148 C146 C133 C072

R237 C140 C137 C135
R119

JL525 R1001 R528

C164 R274
JL209 C178 JL048
R524
C111
C502

C153
C168

R515
IC106

R244

C068
R284

R291 JL113
R533

C506 R255
R245 R282 JL069

L008
C507
R170

R246 C112
R516

IC006
JL527
R107
C154
R253

R248

C106

R103
R252

JL526
C161

C155 C504 R265

R140
R175 C114

R102
R139

JL529 E
R114
C115

R176

R262
R153

JL070
R258 R137
C158 C156

Q111 D102 JL047

C102
C157

R128

C149

JL289
JL530 K A
JL107
IC102

R154
F
R123

R120

R2026

C107 C110
C118 C057
C116

L009
JL108 C280 C109 JL073
Q110

C281
C159

C282 R129 R778

C117

R127

JL528 C160 JL2035

R131
R116

C105
R276 C120
R135
R134

C121
IC103

JL149 R256 C122

Q107

R012
E
R532

JL117 R298 C103

R178

JL120 C131 CL2035 Q004

R2020

JL112 CL2020 R035

R2021

JL122 C104 CL2023

C2014

JL2040 E
JL115

C147 C144 C134 Q014 E

R551

JL119 C138 C136

R117

JL130 JL121 JL2039 R033

C2009
R552

JL114
R115

R2019 JL2034 CL2036 C2135 JL005

R195 R060 R029
JL297
C2013
R518

C2007
R543

JL136 R546 R152

R2022
R203

JL2037
R544
R545

JL118 JL116 JL269

CL2022 JL2038
C2012

CL2021

G CL2026
C2004

C2019
C2006

R141 JL138
JL145
C2003

JL146 JL132 JL131

JL2045
IC2000
JL173 JL109
R296

JL523 JL175 JL2036 CL2024

FB108

JL144 JL171
JL135 JL2003
JL142 JL174 CL2054
JL011
JL147 JL169 JL134 JL172 JL176 CL2053
JL137 JL103 R483
JL143
R187 R491
R297
JL230 JL139 JL141 Q575
JL231 E E Q574
JL128 JL2011 JL008
FB125 FB128 Q576 E
R485

R487

JL127 JL2016
H JL232
JL522

JL126
JL104
JL140
C574
JL010
JL2008

FB130 JL012
JL521 Q012 E
R064

JL125
Q572

JL520
E

R065
Q011

JL045
E
R192

JL2221 JL2222 R066 JL2018

JL2200 JL2009
JL2015
JL124 JL059
JL2224
R002
C087
C012

JL123 JL004
JL068

JL014 CL2012 JL2006

JL2201 JL001
JL2223

I CL2044
JL003

JL2202
JL2204
CL2043
JL2020 CL2004
CL2042

JL2021

CL2040

CL2047
K A C3018

J
IC3001

D3005
JL106 JL105
C3019

CL2046

JL2005
R3009

R3014 R3015 CL2045

CL2056
C3031 CL2055
JL3007

JL3008 CL2041
JL3005
JL3004 JL3002 CL2057
CL2049 CL2048 CL2050 CL2051

JL3006 CL2052
K JL3001
R3047
JL2030

JL2029
cam10

11
1-003-971- (11) Note: When the MOTHERBOARD mounted pc board is
replaced, be sure to refer to “DESTINATION SETTING
METHOD” on page 6.

MHC-V73D
41
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-8. PRINTED WIRING BOARD - SENSOR Board (Component Side) - • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

A SENSOR BOARD
(COMPONENT SIDE)

B PARTY
LIGHT FIESTA
MIC
ECHO
JL5201 JL5223 JL5251

CL5329

GESTURE CONTROL
EAST ELECTRODE

JL5253
C JL5207 JL5234
JL5225
JL5224

GUITAR

D5200 D5000
D5001
VOCAL FADER
VOICE CHANGER
JL5252
JL5205

D
JL5233 JL5221

MEGA BASS

E JL5203
MIC/GUITAR LEVEL
JL5250
MIC/GUITAR LEVEL
JL5255

JL5232 JL5220 JL5227

WIRELESS PARTY CHAIN

F
D5003
GESTURE CONTROL VOLUME VOLUME
GESTURE CONTROL SOUTH ELECTRODE JL5245 JL5248
NORTH ELECTRODE CL5328
JL5204
CL5327
PAIRING
BLUETOOTH

G
JL5235 JL5218 JL5228

D5008

D5002

GESTURE CONTROL CL5200

WEST ELECTRODE

H FUNCTION
JL5236
CL5325
JL5219
SOUND
JL5202 FIELD
JL5237 JL5257

DJ
JL5212 JL5213
I
JL5229 JL5206

GESTURE
ON/OFF JL5247

JL5239 JL5240
D5006 D5007
PLAYBACK

J JL5209
TUNING – TUNING +

JL5211 SAMPLER
JL5238 JL5244 JL5214 JL5215

K 11
JL5241 JL5210 JL5216
JL5242 JL5243 JL5246
KARAOKE

1-004-407- (11)

Note: When the SENSOR board is defective, exchange the TOP

PANEL ASSY SERVICE (V73D).

MHC-V73D
42
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-9. PRINTED WIRING BOARD - SENSOR Board (Conductor Side) - • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

A SENSOR BOARD
(CONDUCTOR SIDE) NFC BOARD VFD BOARD MOTHERBOARD BOARD
CN001 CN8000 CN120
(Page 53) (Page 45) (Page 40)
>010P >011P >006P

B CL5405
CL5403

R5353
R5352
C5400 C5340 C5341 C5344
C5343

R5354
CL5401

R5344 R5358 C5337

1 5 C5339 C5342 CL5334 CL5335
CN5400 C5338 CL5336
2 6
CL5430 CL5431 C5336 C5334
C5335
CL5337

R5359
R5349
R5350
R5345
R5351
R5346
CL5404
12
CL5400 1

7 1 IC5301

C5333
CL5402 C5402

C5331
CN5402
C C5401
6 2
13 24

CL5333 R5335

R5360
R5361
R5355
R5356
R5363
R5341
R5342
R5364
CL5332

R5334
CL5432 CL5330
CL5429 C5326 C5327 C5328 CL5331
C5324 C5321

C5330
CL5433 C5325 R5343
C5323 C5322
CL5428

CL5427

CL5203
CL5444

D CL5445

C5407 CL5423

D5307

CL5425
25

CL5426 JL5313
24

E 7

CN5301
6 2
1

R5365

CL5443 JL5314
CL5422
JL5317
JL5315

>007P

R5319

D5310
D5308
JL5318
CN5401

R5322
MOTHERBOARD

R5332
C5304

R5329
JL5316 C5309 R5327
BOARD

C5318
CL5441
CL5319

R5320
CL5320CL5323

CN126 R5321 21 15
22 14
C5305

C5346
CL5326 R5323
FB5300 CL5314 IC5300 CL5324
F (Page 40) GESTURE CONTROL CL5313 CL5315
2

28
8
TRANSMITTER C5306 1 7 C5347
1

C5303
CL5317
CL5321

C5308
CL5407

R5324
R5325
R5328
R5330
CL5406
CL5412
CL5410

C5408
CL5416 D5309
CL5442
C5412
CL5411
CL5418

G CL5415

4
CL5419

1
CL5417

CN5201
(NC)

R5253
CL5211

3
CL5209

5
R5205
CL5212

R5201
CL5137
R5211 CL5207 R5202
C5203
R5203

C5202

IC5202
R5213
CL5205 R5208
R5061

C5200
C5201
C5060 CL5206 R5210

H R5212
R5062

R5250 CL5214
R5073

CL5101 CL5204 R5220 CL5210

R5222
C5056 R5221 R5204
CL5110
C5057 C5049 C5051
C5053
R5063

C5048 C5050 C5052

R5071
R5091
R5103

R5089
R5068
R5067

CL5112
CL5111
C5058

>012P
24 13 CL5213
CL5447
IC5002
R5084

CL5136

POWER-KEY BOARD
1
12 CL5439
C5061
C5062

R5074
C5066 R5076
R5081
R5075
R5080
R5079

CL5440 5 1

I R5083 CL5134
CN5403
4 2 CN8450
(Page 47)
CL5135
C5063 C5067
C5071 C5070 C5068
C5069
R5082 CL5446 CL5434

K
11
1-004-407- (11)

Note: When the SENSOR board is defective, exchange the TOP

PANEL ASSY SERVICE (V73D).

MHC-V73D
43
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-10. PRINTED WIRING BOARD - SMPS Board - • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

SMPS BOARD
A >002P MOTHERBOARD BOARD
CN001
(Page 40)

JL6509

ET6500
JL6545 JW6030 R6554
JW6029

R6599
NO6500

JW6017
1 3 12 JL6507

JW6011
B (CHASSIS)

JW6005
JL6511

C6534
JL6504 ET6501
JW6021 C6515 C6523 (CHASSIS)
FB6504
JL6517 FB6505 JL6503 JW6019

JW6006
JL6506
JL6544
JL6519 JL6520

C6558
1

C6507

JW6022
C6559

JW6038

JW6007
C6529
JW6026
C JL6512
JW6032
JW6033
NO6501

R6568 R6515 JW6034

JS6508

R6525
R6520 R6540
2 1
R6516 JL6525 JL6527

C6510

R6572
>003P C6545 C6524
R6517

IC6500
JL6543 A933 JL6508 R6541
FB6503
C6511 C6509 C6521
R6558

MOTHERBOARD JL6516 D6504 D6501 JW6013

R6547

Q6507
R6560

C6560 R6518
JL6533 R6561 R6549

BOARD

C6556
JL6510
JL6514

E
R6571
R6509

R6537
CN2007
R6557

JL6536
R6595

R6507JL6522

C6546
JL6542 JW6027 JL6557
9

(Page 40) R6583

D JL6513 JL6569 F6500
JL6550
R6535

K
D6510
R6508 JL6547
JL6531

T6300 R6512
JW6014

Q6501 C6504
R6539 JL6526

A
R6550

Q6500
E R6504
C6514 R6505 A K JL6551
D6505 D6511

E
R6523 R6579 D6530
R6548

A K A K R6503
A K
D6500
R6521

JL6566 D6525
C6540
C6513

Q6504 C6547
JL6532

JL6568 K A K A C6502
R6538 A K C6539 JL6534 D6502 D6503 R6500
C6543
Q6509

JL6565 R6501
K A JL6535 R6502 JL6530 JL6529 JL6500
E

R6577 JL6564 D6524 R6574 R6575

JL6567 R6598 JL6521
E

JL6552
A K JL6528
C6561
2 1 D6522 D6523
JS6507 PH6302 PH6300
PH6301
C6321

JL6308 JL6307 JL6306

JW6024

R6324
R6344
R6325
Q6307 E R6338
JW6001
C6537

R6339
C6315
D6520 R6551
C6301 R6327
F R6329
E C6318
JL6300

D6521
A
Q6306 R6336 R6323
R6335 K A

A
A

D6300

R6320
C6319

K
D6519 E
D6312

R6326 D6526

K
Q6305
R6570
K

R6328
JW6031
A
JL6313 D6306
C6314

C6320 C6303
C6317
A

JW6035
D6308

R6343
R6330

Q6300 Q6301
K Q6304

G
C6549

C6548

JL6312
K
D6313

D6305

JL6311
A

FB6300
A

R6305 R6306 FB6301

R6309

JL6310
K

JL6560
D6311

C6313 JW6015
R6312

R6593
C6322
JL6538

JW6036
A

C6552
JL6561

JW6004
JL6541 C6557
JW6016 R6321
R6334

A932
JL6314 JL6304 A K D6304
C6312
Q6302

TH6300
E

E
H Q6303 C6307 C6309
IC6300

R6307
K A D6303
JL6303 JW6012

R6341

R6303 R6315
R6340

C6305
D6340
K

JL6305

K
D6341
C6340

R6316
R6313
A

JW6025

A
JW6003

R6318 R6319 JL6302

C6311

JL6309
JL6301
C6300

R6333
JW6010
JW6018

I
D6001

R6300 R6301 R6302 C6310

TH6000
JW6009

JL6000

D6000
A931
C6007
VR6000

F6000
LF6001
LF6000

J
C6009

JW6008
JW6028

JW6002

JL6002 JL6001
CN6000

K 1 2
AC IN
C6003

C6000
C6002
C6001
ET6000

JS6011

(CHASSIS)
FB6000 11
1-004-518- (11)

MHC-V73D
44
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-11. PRINTED WIRING BOARD - VFD Board - • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

A VFD BOARD
(COMPONENT SIDE)

ND8000
VACUUM FLUORESCENT DISPLAY

>011P
SENSOR BOARD
CN5402
D (Page 43)
C8005
C8009

C8008

C8007
6 2

7 1

CN8000

E 11
1-004-404- (11)

G VFD BOARD
(CONDUCTOR SIDE)

H
C8003

C8006

R8005
C8004

R8007
CL8022
CL8025 CL8027
I CL8017
CL8018 CL8024
CL8021
CL8011 CL8012 CL8014 CL8019 CL8029 CL8031
CL8016
CL8009 CL8013 CL8015 CL8023 CL8026
C8002

C8010
R8000
C8000

CL8001
E
Q8001

JR8001
C8012

CL8003
R8001
JR

CL8006 R8014
J CL8005 CL8007 R8012
R8013
Q8000

CL8000
JR8000

CL8004 R8015
R8003

CL8002
JR
E

R8016

11
K
1-004-404- (11)

MHC-V73D
45
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-12. PRINTED WIRING BOARD - MIC-USB Board - • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

A MIC-USB BOARD J8201

(COMPONENT SIDE) J8200

MIC1
MIC2
GUITAR

CN8201
REC/PLAY

B 5V 1A

W8200

7 6 5

4 1

C
7
CN8202

C8232
>005P
D MOTHERBOARD
BOARD 11
1

CN451 (11)
1-004-405-

C8233
(Page 40)
C8231
C8225

LP002

E C8229
1

C8218
CN8200
2

C8224

>001P
MOTHERBOARD
8

BOARD
9

LP001
F CN902
(Page 40)

G MIC-USB BOARD
(CONDUCTOR SIDE)

Q8200, Q8201,
Q8202 CL8215
C1 B2E2

H E1 B1C2
C8240
C8236

FB8201

FB8200

CL8203
CL8230
CL8200
R8207

R8204

C8239

C8210
C8234
R8233
R8230

R8232
R8231
C8235

I CL8227
CL8229 CL8225
R8226
JR8200
JR

CL8201 CL8202
C8227
R8227
C8201
R8222

R8223
C8220

C8238
R8229

C8203
J CL8208
Q8202

IC8200

R8220
R8225
C8222
R8215
C8217
R8214

CL8205
C8219

C8216
R8213

JR8201
R8234 JR
C8221
R8224

CL8204
R8221
C8223

R8212

CL8206
R8219 CL8207
JR8004

D8204
JR8002
Q8200

C8212

JR

K
JR

CL8228
JR8003

Q8201 CL8209
JR

C8214 R8239

CL8210
11
1-004-405- (11)

MHC-V73D
46
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-13. PRINTED WIRING BOARD - POWER-KEY Board - • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

A
POWER-KEY BOARD
(COMPONENT SIDE)

B
CN8450 CN8451
1 5 2 4

2 4 1 3

C S8450 S8452
TAIKO

11
1-004-530- (11)
>012P >013P
D
SENSOR BOARD IR BOARD
CN5403 CN8400
(Page 43) (Page 52)

POWER-KEY BOARD
(CONDUCTOR SIDE)
F

CL8454
CL8455

CL8453

G CL8456
CL8457
CL8458

11
H 1-004-530- (11)

MHC-V73D
47
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-14. PRINTED WIRING BOARD - LED HUB Board (Component Side) - • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

A LED HUB BOARD

(COMPONENT SIDE)
PARTY LED-LR BOARD
PARTY RGB-FR BOARD (RIGHT)
CN9250 CN9101
(Page 51) (Page 50)
B >014P >015P

R8588 CN8511
R8634
C8633 R8582 R8633

C8642
C8567 R8581 R8548 6 5

C8563
R8609

C8553
C8556 C8603 R8579
R8598 R8586

R8516
C8606 C8605

24
C R8580 C8564 R8549 R8540 R8512

1
R8578 4 1
C8566
11

R8608 C8602 2 8

24

24
1

1
C8571

C8578
R8520 C8552 C8607 R8577 R8518 C8550
R8564 R8607 CN8508
L8502

IC8503
R8627
1

C8569

R8584
R8533 R8619 R8558

R8585
R8529

C8610 C8611
R8623

IC8504
R8563 1 9

IC8506
R8602 C8546 C8579
R8528

R8561
C8576
R8601 R8613 R8626 C8565 >016P

R8583
C8572
R8562 R8532 R8618 R8531 R8514

C8559
R8622 C8575 C8537
C8530 CL8529
PARTY RGB-BK BOARD

R8590
C8533 R8530

C8532
R8591
R8539 R8547 R8612
R8625 R8535 R8527 C8568

13
12
R8550
CN9151

R8599
R8570 R8632

24
R8536 C8573 C8541

R8600

1
R8624 R8537 R8526

13

12
12

13
C8601 R8569 C8625
(Page 51)
CN8504

R8522
R8538 R8555 C8641
R8534 C8528 R8631
D C8529
C8608 R8525 R8557 C8551

IC8505
C8626
C8609 R8554 R8574

R8636
R8635
C8628 R8524 R8553 R8546
R8556 C8580

C8538
C8643 C8600 C8629
C8574

C8644
C8577 R8545
R8573
R8572 R8571 R8544 C8543
C8517

C8635

2 10 R8543 R8630

12

13
C8634 5 1

C8627
CL8500 R8542

C8639
C8548
10

7 6 1 CN8505 11 R8541
CN8510 V83D
E
12

R8629

11
1-004-414- (11)
F
>017P >018P >019P >020P
SW LED-R BOARD HORN LED BOARD HORN LED BOARD EXTENSION BOARD
CN9350 (RIGHT) (LEFT) CN9500
(Page 52) CN9000 CN9000 (Page 51)
(Page 53) (Page 53)
G

MHC-V73D
48
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-15. PRINTED WIRING BOARD - LED HUB Board (Conductor Side) - • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

A
LED HUB BOARD
(CONDUCTOR SIDE)

CL8565 CL8568
CL8566
JL8500
C8519
B

R8504
C8527

C8590

R8505

C8511
C8525 C8518
CL8521 CL8523

C8620
CL8526 C8516
R8506

R8502

CL8564
C8512
C8506
CL8524
L8501
9 1

CN8503 IC8501
C

C8505
8 2

C8504
L8500

C8513
R8503

CL8522 >009P

C8632
CL8525 CL8520

CL8563 MOTHERBOARD BOARD

CN002

C8636
2 1
C8624

CL8567 (Page 40)

D 4 3

CN8500

11
1-004-414- (11)
E
>008P
MOTHERBOARD BOARD
CN101
(Page 40)

MHC-V73D
49
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-16. PRINTED WIRING BOARD - DAB Board (AEP) - 6-17. PRINTED WIRING BOARD - PARTY LED-LR Board -
• See page 39 for Circuit Boards Location. • : Uses unleaded solder. • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

DAB BOARD (AEP) PARTY LED-LR BOARD

A A
(COMPONENT SIDE) (LEFT) (RIGHT)

13 1
B CN4500 B
14 2

D9103

D9103
CL4530 C4522
CL4536
FB4505 C4521

R4510
C CL4534 C CL9103 CL9103
R4505

C4520

R9107

R9107
R4506
12

R9102

R9102
CL4535
C4517

CL9104 CL9104
1

CL9102 CL9102
C4516

CL4533
JC4503
K

C4511

CL9100 CL9100
D4501

JC4506
IC4500
CN4502

11

11
>004P CL4532

9
A

CN9101

CN9101
D MOTHERBOARD CL4531
C4509
CL4517
D >021P >015P
BOARD R4504
CN600
R4508 EXTENSION LED HUB
R4503

1
C4510
11

BOARD BOARD

10

10
13

(Page 40) R4509

CN9501 CL9106 CN8508 CL9106
CL4537
CL4529 (Page 51) CL9107
(Page 48) CL9107
JC4507

R9106 R9106
R4507

CL9105

CL9105
R9108 R9108

E E R9104 R9104
CL4516
11
13 1 1-004-532- (11) D9101 D9101

CN4501
14 2

F F

G DAB BOARD (AEP) G

(CONDUCTOR SIDE)
D9100 D9100

CL4503 CL4519

H CL4518
CL4525 CL4502
CL4524 H
CL4523 CL4504 CL4528
CL4501

CL4514

I CL4508 I
CL4509

CL4510

CL4513
CL4512

J J D9102 D9102

CL4515

CL4511
CL4527

CL4526 CL4500

K CL4520
K
CL4507 CL4506 CL4505

CL4521 CL4522
11
11 11
1-004-532- (11)
1-004-410- (11) 1-004-410- (11)

MHC-V73D
50
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-18. PRINTED WIRING BOARD - EXTENSION Board - 6-20. PRINTED WIRING BOARD - PARTY RGB-BK Board -
• See page 39 for Circuit Boards Location. • : Uses unleaded solder. • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

A EXTENSION BOARD A
PARTY RGB-BK BOARD
PARTY LED-LR BOARD (COMPONENT SIDE)
(LEFT) LED HUB BOARD
CN9101 CN8505
(Page 50) (Page 48)
B >021P >020P B

CL9157
CN9151
5 6
CL9156
2 8 11 1 1 4
CN9501 CN9500

R9152
CL9155
1 9 10 2

R9151
CL9158
C C
11
1-004-411- (11)
>016P
11
LED HUB BOARD
D 1-005-577- (11) D CN8511
(Page 48)

E E

PARTY RGB-BK BOARD

6-19. PRINTED WIRING BOARD - PARTY RGB-FR Board - (CONDUCTOR SIDE)
• See page 39 for Circuit Boards Location. • : Uses unleaded solder. F

1 2 3 4 5 6 7 8
D9151

A G
PARTY RGB-FR BOARD 11
1-004-411- (11)
LED HUB BOARD
CN8504
(Page 48)
B H
>014P

9 8

7
CN9250 1
CL9256
D9252
C CL9255 I
CL9254 CL9253
R9253
R9251 CL9252

D9253 CL9251
CL9250

D 11 J
1-004-413- (11)

E K

MHC-V73D
51
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-21. PRINTED WIRING BOARD - SW LED-L Board - 6-23. PRINTED WIRING BOARD - IR Board -
• See page 39 for Circuit Boards Location. • : Uses unleaded solder. • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

A SW LED-L BOARD A
SW LED-R BOARD IR BOARD
CN9351 (COMPONENT SIDE)
(Page 52)
>022P

B B
CN9300

4 3
IC8400
2 1

C C
C8402

CL9300
R9300 R9301
D9301
CL9301
D9300 11
1-004-415- (11) 3 1

11
4 2
D D CN8400

1-004-406- (11)
>013P
POWER-KEY BOARD
CN8451
E E (Page 47)

F
IR BOARD
6-22. PRINTED WIRING BOARD - SW LED-R Board - (CONDUCTOR SIDE)
• See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8
G

A SW LED-R BOARD CL8403

LED HUB BOARD SW LED-L BOARD CL8404

CN8504 CN9300
(Page 48) (Page 52) H
CL8401
>017P >022P

R8400
B CL8400
CN9350 CN9351
5 4 4 3
CL8402 11
I (11)
3 1 2 1
1-004-406-

C
CL9350
R9351 R9350
CL9351
D9350 D9351 11 J
1-004-416- (11)
D

MHC-V73D
52
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

6-24. PRINTED WIRING BOARD - HORN LED Board - 6-25. PRINTED WIRING BOARD - NFC Board -
• See page 39 for Circuit Boards Location. • : Uses unleaded solder. • See page 39 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

A HORN LED BOARD A NFC BOARD

(COMPONENT SIDE) (COMPONENT SIDE)
SENSOR BOARD
CN5400
(LEFT) (RIGHT) (Page 43)
B B
>010P

C001

C003
C002
IC001
CN001
8

6
1
7
C D9000 D9000 C
R002
R001 11
1-980-619- (11)
11 11
1-004-408- (11) 1-004-408- (11)
D D
NFC BOARD
(CONDUCTOR SIDE)

E E
11
1-980-619- (11)

F HORN LED BOARD F

(CONDUCTOR SIDE)

(LEFT) (RIGHT)
LED HUB BOARD LED HUB BOARD
G CN8510 CN8510 G
(Page 48) (Page 48)
>019P >018P

H H
1 2 1 2

3 4 3 4

CN9000 CN9000

I 11 11 I
1-004-408- (11) 1-004-408- (11)

J J

K K

MHC-V73D
53
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL

SECTION 7 For Authorized Servicer

EXPLODED VIEWS
Note:
• -XX and -X mean standardized parts, so • The mechanical parts with no reference
they may have some difference from the The components identified by mark 0
number in the exploded views are not sup-
original one. or dotted line with mark 0 are critical for
plied.
• Items marked “*” are not stocked since safety.
• Color Indication of Appearance Parts Ex-
they are seldom required for routine ser- Replace only with part number specified.
ample:
vice. Some delay should be anticipated KNOB, BALANCE (WHITE) . . . (RED) The components identified by mark 9 con-
when ordering these items.   tain confidential information.
Parts Color Cabinet’s Color Strictly follow the instructions whenever the
components are repaired and/or replaced.

7-1. LOADING-M PANEL SECTION

top-M panel section

side panel
M-L section
1

#1 #1

1 2

1
ns
3
ns side panel
ns A
M-R section
#1
ns
4
1

DAB
assembly_UART 1
(AEP) section

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
1 459140401 SCREW, TAPPING (FLAT HEAD) #1 768564671 SCREW +BVTP 3X8 TYPE2 IT-3
2 458928121 SCREW, TAPPING
3 453675401 SPRING (LP) ns not supplied
4 501235801 PANEL, LOADING-M

54
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-2. DAB ASSEMBLY_UART (AEP) SECTION

CDM section

rear panel ST-M

section
52
51 51
51 ns
ns

SMPS, MOTHERBOARD
board section
#1 #1
#3

#1

(AEP)

(AEP)

54

53

Note: If flexible flat cable is replaced, install it after bending it in

the same form as that before replacement.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
51 458928121 SCREW, TAPPING #1 768564671 SCREW +BVTP 3X8 TYPE2 IT-3
52 X50016131 COVER, JACK ASSY
53 100499711 FLEXIBLE FLAT CABLE (11P) (AEP) #3 768254704 SCREW +B 3X6
54 A5011986A DAB ASSEMBLY_UART (AEP) ns not supplied

55
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-3. SMPS, MOTHERBOARD BOARD SECTION

103 101 101

101

ns ns

101
102
101
ns

104

#1 105

chassis section

Note 1: If flexible flat cable is replaced, install it after bending it in

the same form as that before replacement.

Note 2: When the MOTHERBOARD mounted pc board is re-

placed, be sure to refer to “DESTINATION SETTING
METHOD” on page 6.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
101 267783901 +PWH 3X8 (SUMITITE) 9 105 A5014560A MOTHERBOARD MOUNTED PC BOARD
0 102 A5009900A SMPS MOUNTED PC BOARD (for SERVICE) (EXCEPT AEP)
103 100542911 FLEXIBLE FLAT CABLE (9 CORE) #1 768564671 SCREW +BVTP 3X8 TYPE2 IT-3
104 473122811 COVER, SERVICE ns not supplied
9 105 A5014561A MOTHERBOARD MOUNTED PC BOARD
(for SERVICE) (AEP)

56
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-4. CHASSIS SECTION

155
ns
ns #1
#1
ns #1
154

#1 ns
ns

156
152
ns

156
153
#1

156

#1
151

mid horn
rear-M section

Note: If flexible flat cable is replaced, install it after

bending it in the same form as that before
replacement.
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
151 100544311 FLEXIBLE FLAT CABLE (11 CORE) 156 501975411 CUSHION, HEMILON
152 100543011 FLEXIBLE FLAT CABLE (9 CORE) #1 768564671 SCREW +BVTP 3X8 TYPE2 IT-3
153 A5011845A LED HUB MOUNTED PC BOARD ns not supplied
0 154 185550421 DC FAN (3500RPM/200MM)
155 502050901 CUSHION (SMPS)

57
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-5. MID HORN REAR-M SECTION

#2
202
front panel ST-M
section

202

ns #2
ns
ns
C

#2 B 201
#2
ns

#2 rear cabinet section

C 201
E

D
203
front panel SW
section

201

201

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
201 458928121 SCREW, TAPPING #2 768564771 SCREW +BVTP 3X10 TYPE2 IT-3
202 453259302 SCREW (4X13) (TR-184A) ns not supplied
203 422996602 SCREW (4X16), +BV TAPPING

58
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-6. FRONT PANEL ST-M SECTION

258

260

252
253

#1

261
261
261 ns SP2

ns ns
262 ns
258 #1

ns
ns
ns 257
#1
#1
#1
ns
ns
259 SP5 FG

#1 #1

ns 251
#1
256
#1

SP1
#1 256 255
#1 G ns
F

SP4
ns
#1
255

254

ns 254
Note: If flexible flat cable is replaced, install it after bending it in
the same form as that before replacement.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
251 A5010874A EXTENSION MOUNTED PC BOARD 260 501234501 PANEL, TWEETER M-FL
252 100542311 FLEXIBLE FLAT CABLE (4 CORE)
253 A5009711A IR MOUNTED PC BOARD 261 501923701 DAMPER, BUSHING
254 487461412 SCREW (1) (3.5X14), TAPPING 262 X50011001 PANEL, FRONT ST-M (ASSY)
255 A5009714A HORN LED MOUNTED PC BOARD SP1 100628511 LOUDSPEAKER 8CM (Mid: L-CH)
SP2 100628611 LOUDSPEAKER 4CM (Tweeter Front) (L-CH)
256 501241701 EQUALIZER, MID CAP-H SP4 100628511 LOUDSPEAKER 8CM (Mid: R-CH)
257 145736912 CORE, FERRITE
258 501923801 SHEET, SEAL FP SP5 100628611 LOUDSPEAKER 4CM (Tweeter Front) (R-CH)
259 501234601 PANEL, TWEETER M-FR #1 768564671 SCREW +BVTP 3X8 TYPE2 IT-3
ns not supplied

59
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-7. FRONT PANEL SW SECTION

308

ns
307

ns

ns
ns
ns
ns
#2

ns
ns

303
#1 305
#1 #2
304
ns
#1

#1 301
ns

302
#1

307

306
305

306

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
301 234511501 SCREW (S), FLOAT 307 501975401 CUSHION, HEMILON
302 A5009719A PARTY RGB-FR MOUNTED PC BOARD 308 X50010981 PANEL, FRONT SW (ASSY)
303 A5009722A SW LED-R MOUNTED PC BOARD #1 768564671 SCREW +BVTP 3X8 TYPE2 IT-3
304 A5009721A SW LED-L MOUNTED PC BOARD #2 768564771 SCREW +BVTP 3X10 TYPE2 IT-3
305 501993711 FOOT
ns not supplied
306 501993701 FOOT

60
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-8. LOUDSPEAKER SECTION

rear cabinet
section 351
351

351
ns
353

ns
351

SP7

351

352 ns

352
ns

Ref. No. Part No. Description Remark

351 501239701 SCREW (M4X25)
352 423840702 SCREW (1) (4X20), +BV TAPPING
353 145736912 CORE, FERRITE
SP7 100644211 LOUDSPEAKER (30CM) (Woofer)
ns not supplied

61
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-9. REAR CABINET SECTION

402

#1
405
ns ns
ns
ns
ns

ns
#1
401
ns

ns

ns ns

ns

ns

ns
#1
ns

#1
ns
ns

403
ns

#1 403

#1

ns
ns

404
404

404

404

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
401 498567201 SCREW (+PTPWHM2.6), FLOATING 405 A5017054A CABINET, REAR ASSY
402 A5009717A PARTY RGB-BK MOUNTED PC BOARD
403 100590111 SHAFT, PWB #1 768564671 SCREW +BVTP 3X8 TYPE2 IT-3
404 501993701 FOOT ns not supplied

62
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-10. SIDE PANEL M-L, M-R SECTION

451
451

453 452
ns

453 456
ns
ns
#1

ns 451
457
452
#1

#1
453
#1
454

ns #1 455 451
ns
#1
#1 453
ns

455 454

#1

ns

ns

ns

Note: If flexible flat cable is replaced, install it after bending it in

the same form as that before replacement.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
451 234511501 SCREW (S), FLOAT 456 X50018371 PANEL, SIDE M-L ASSY
452 459141011 SPRING, USB 457 X50018361 PANEL, SIDE M-R ASSY
453 501127301 FOOT, LID (S) #1 768564671 SCREW +BVTP 3X8 TYPE2 IT-3
454 100543111 FLEXIBLE FLAT CABLE (9 CORE) ns not supplied
455 A5009716A PARTY LED-LR MOUNTED PC BOARD

63
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-11. TOP-M PANEL SECTION

510 #1

509
#1

503 ns
ns
ND8000
504
#1
511
508
506
ns

505 513
514
512

514
#1

502

515

SENSOR board (ns)

501
507

Note: If flexible flat cable is replaced, install it after bending it in

the same form as that before replacement.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
501 100543811 FLEXIBLE FLAT CABLE (5 CORE) 511 100543511 FLEXIBLE FLAT CABLE (6 CORE)
502 A5009906A POWER-KEY MOUNTED PC BOARD 512 458670521 DOUBLE ADHESIVE TAPE
503 501975421 CUSHION, HEMILON 513 A2092220A NFC MOUNT
504 146985411 CORE, FERRITE 514 501854101 SHEET, SEAL
505 100544011 FLEXIBLE FLAT CABLE (25 CORE) 515 A5018383A TOP PANEL ASSY SERVICE (V73D)
(Including SENSOR board)
506 100543311 FLEXIBLE FLAT CABLE (7 CORE)
507 472905401 COVER, MIC USB ND8000 148354931 VACUUM FLUORESCENT DISPLAY
508 A5009710A MIC-USB MOUNTED PC BOARD #1 768564671 SCREW +BVTP 3X8 TYPE2 IT-3
509 100543411 FLEXIBLE FLAT CABLE (7 CORE) ns not supplied
510 A5009709A VFD MOUNTED PC BOARD

64
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-12. REAR PANEL ST-M SECTION

551

552

551

SP3

#2

SP6
554

ns
#2 553
#2

(AEP)
#2
#2 #2

#2

#2

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
551 501854111 SHEET, SEAL SP3 100883011 LOUDSPEAKER (4CM) (Tweeter Rear) (R-CH)
552 501234801 PANEL, TWEETER REAR M-R SP6 100883011 LOUDSPEAKER (4CM) (Tweeter Rear) (L-CH)
553 501234701 PANEL, TWEETER REAR M-L #2 768564771 SCREW +BVTP 3X10 TYPE2 IT-3
554 501234111 PANEL, REAR ST-M (AEP) ns not supplied
554 501234101 PANEL, REAR ST-M (EXCEPT AEP)

65
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-13. CDM SECTION

#1

DVD mechanism section

(CDM90-DVBU204//M)

603
602

605
603 601
602
602
605
ns ns

603

605
603
604
605

604
604
604
ns
ns
ns

ns

ns

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
601 146982911 CORE, FERRITE 605 453338201 INSULATOR
602 234511501 SCREW (S), FLOAT
603 453557701 STEP SCREW M2.6 #1 768564671 SCREW +BVTP 3X8 TYPE2 IT-3
604 459015901 SPRING, INSULATOR ns not supplied

66
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

7-14. DVD MECHANISM SECTION

(CDM90-DVBU204//M)

ns
651 (including MS-476 board)

ns

ns
653

652
653

653 654

ns

ns

ns
MS-476
board (ns)

655

ns

656

Note: If flexible flat cable is replaced, install it after bending

it in the same form as that before replacement.
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
0 651 A1896391D LOADING COMPLETE ASSY (T) 655 100544211 FLEXIBLE FLAT CABLE (24 CORE)
(including MS-476 board)
652 308759901 INSULATOR SCREW 656 100543711 FLEXIBLE FLAT CABLE (5 CORE)
653 263461821 INSULATOR ns not supplied
0 654 A2046956A SERVICE, OPTICAL DEVICE (7G)

67
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL

SECTION 8 For Authorized Servicer

ELECTRICAL PARTS LIST

DAB EXTENSION
• RESISTORS
HORN LED IR LED HUB All resistors are in ohms.
When indicating parts by reference number,
please include the board name.
MIC-USB MOTHERBOARD METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
MS-476 NFC PARTY LED-LR The components identified by mark 0
F: nonflammable
or dotted line with mark 0 are critical for
PARTY RGB-BK • Items marked “*” are not stocked since they
safety.
are seldom required for routine service.
Replace only with part number specified.
PARTY RGB-FR POWER-KEY Some delay should be anticipated when
ordering these items.
SENSOR SMPS SW LED-L • SEMICONDUCTORS
The components identified by mark 9 contain
confidential information.
SW LED-R VFD In each case, u: μ, for example:
Strictly follow the instructions whenever the
uA. . : μA. . , uPA. . , μPA. . ,
Note: components are repaired and/or replaced.
uPB. . : μPB. . , uPC. . , μPC. . ,
• Due to standardization, replacements in uPD. . : μPD. .
the parts list may be different from the parts • CAPACITORS
specified in the diagrams or the components uF: μF
used on the set. • COILS
• -XX and -X mean standardized parts, so uH: μH
they may have some difference from the
original one.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
DAB BOARD (AEP) A5009716A PARTY LED-LR MOUNTED PC BOARD
*************** ******************************
************************************************************** **************************************************************

A5010874A
EXTENSION MOUNTED PC BOARD A5009717A PARTY RGB-BK MOUNTED PC BOARD
**************************** ******************************
************************************************************** **************************************************************

A5009714A
HORN LED MOUNTED PC BOARD A5009719A PARTY RGB-FR MOUNTED PC BOARD
************************** ******************************
************************************************************** **************************************************************

A5009711A
IR MOUNTED PC BOARD A5009906A POWER-KEY MOUNTED PC BOARD
******************** ****************************
**************************************************************
< SWITCH >
A5011845A
LED HUB MOUNTED PC BOARD
************************* S8450 176287521 SWITCH, KEYBOARD (1)
************************************************************** S8452 176287521 SWITCH, KEYBOARD (TAIKO)
**************************************************************
A5009710A
MIC-USB MOUNTED PC BOARD
************************* SENSOR BOARD
************************************************************** **************

9 A5014560A MOTHERBOARD MOUNTED PC BOARD When the SENSOR board is defective, exchange the TOP PANEL ASSY SERVICE
(for SERVICE) (EXCEPT AEP) (V73D).
9 A5014561A MOTHERBOARD MOUNTED PC BOARD **************************************************************
(for SERVICE) (AEP)
****************************** 0 A5009900A SMPS MOUNTED PC BOARD
***********************
< IC > **************************************************************

IC2001 672324701 IC TAS5534DGGR-S A5009721A SW LED-L MOUNTED PC BOARD

************************************************************** **************************
**************************************************************
MS-476 BOARD
************ A5009722A SW LED-R MOUNTED PC BOARD
**************************
When the MS-476 board is defective, exchange the entire LOADING COMPLETE **************************************************************
ASSY (T).
************************************************************** A5009709A VFD MOUNTED PC BOARD
*********************
A2092220A
NFC MOUNT **************************************************************
**********
**************************************************************

Note: When the MOTHERBOARD mounted pc board is replaced,

be sure to refer to “DESTINATION SETTING METHOD” on
page 6.

68
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
MISCELLANEOUS ACCESSORIES
************** ************

53 100499711 FLEXIBLE FLAT CABLE (11P) (AEP) 100517911 HARNESS,DAB ANTENNA WIRE (AEP)
103 100542911 FLEXIBLE FLAT CABLE (9 CORE) 149344811 REMOTE COMMANDER (RMT-AM420U)
151 100544311 FLEXIBLE FLAT CABLE (11 CORE) 175485221 ANTENNA (FM) (EXCEPT AEP)
152 100543011 FLEXIBLE FLAT CABLE (9 CORE) 0 178550421 ADAPTOR, CONVERSION (MY, LA9, E4)
0 154 185550421 DC FAN (3500RPM/200MM) 0 184979952 POWER SUPPLY CORD SET
(AEP, RU, MY, LA9, E4)
252 100542311 FLEXIBLE FLAT CABLE (4 CORE)
257 145736912 CORE, FERRITE 0 184980151 POWER SUPPLY CORD SET (BR)
353 145736912 CORE, FERRITE 0 184980352 POWER SUPPLY CORD SET (AR)
454 100543111 FLEXIBLE FLAT CABLE (9 CORE) 0 184980453 POWER SUPPLY CORD SET (AUS)
501 100543811 FLEXIBLE FLAT CABLE (5 CORE) 0 191232151 POWER SUPPLY CORD SET (E12)
0 191233122 POWER SUPPLY CORD SET (AEP, EA)
504 146985411 CORE, FERRITE
505 100544011 FLEXIBLE FLAT CABLE (25 CORE) 501488611 GUIDE, REFERENCE (ENGLISH/SPANISH)
506 100543311 FLEXIBLE FLAT CABLE (7 CORE) (AUS, LA9, E12)
509 100543411 FLEXIBLE FLAT CABLE (7 CORE) 501488621 GUIDE, REFERENCE (ENGLISH/MALAY/
511 100543511 FLEXIBLE FLAT CABLE (6 CORE) TRADITIONAL CHINESE/THAI) (MY)
501488631 GUIDE, REFERENCE (ENGLISH/FRENCH/
515 A5018383A TOP PANEL ASSY SERVICE (V73D) PORTUGUESE/ARABIC) (EA, E4)
(Including SENSOR board) 501488641 GUIDE, REFERENCE (SPANISH) (AR)
601 146982911 CORE, FERRITE 501488651 GUIDE, REFERENCE (RUSSIAN/UKRAINIAN) (RU)
0 651 A1896391D LOADING COMPLETE ASSY (T)
(including MS-476 board) 501488661 GUIDE, REFERENCE (BRAZILIAN PORTUGUESE)
0 654 A2046956A SERVICE, OPTICAL DEVICE (7G) (BR)
655 100544211 FLEXIBLE FLAT CABLE (24 CORE) 501488671 GUIDE, REFERENCE (ENGLISH/FRENCH/
SPANISH/GERMAN/DUTCH) (AEP)
656 100543711 FLEXIBLE FLAT CABLE (5 CORE) 501488681 GUIDE, REFERENCE (ITALIAN/POLISH/SWEDISH/
SP1 100628511 LOUDSPEAKER 8CM (Mid: L-CH) DANISH/CZECH) (AEP)
SP2 100628611 LOUDSPEAKER 4CM (Tweeter Front) (L-CH) 501488691 GUIDE, REFERENCE (HUNGARIAN/NORWEGIAN/
SP3 100883011 LOUDSPEAKER (4CM) (Tweeter Rear) (R-CH) ROMANIAN/BULGARIAN/GREEK) (AEP)
SP4 100628511 LOUDSPEAKER 8CM (Mid: R-CH)

SP5 100628611 LOUDSPEAKER 4CM (Tweeter Front) (R-CH)

SP6 100883011 LOUDSPEAKER (4CM) (Tweeter Rear) (L-CH)
SP7 100644211 LOUDSPEAKER (30CM) (Woofer)
**************************************************************

Note: If flexible flat cable is replaced, install it after bending it in the

same form as that before replacement.

69
SYS SET
2020/06/19 02:21:42 (GMT+09:00)
MHC-V73D Sony CONFIDENTIAL
For Authorized Servicer

REVISION HISTORY

Ver. Date Description of Revision

1.0 2020.06 New

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use the
PDF file search function to find one.

e.g.) If a contact point is shown as , follow the procedure below.

Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.

SYS SET