Scribd
Upload
31 views2 pages

Gujarat Technological University

This document is an exam for a course on Instrumentation and Process Control. It contains 5 questions covering various topics: 1. Define functions and derive transfer functions for systems like a mercury thermometer. 2. Solve differential equations using Laplace transforms, including finding the inverse Laplace transform of a function. 3. Define concepts like dead zone and derive transfer functions for things like a U-tube manometer. 4. Distinguish between feedback types and discuss methods like root locus. Describe instruments like a pressure spring thermometer. 5. Briefly describe industrial control systems and draw diagrams to explain liquid level measurement systems or control systems and determine related values.

Uploaded by

Jay PATEL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views2 pages

Gujarat Technological University

This document is an exam for a course on Instrumentation and Process Control. It contains 5 questions covering various topics: 1. Define functions and derive transfer functions for systems like a mercury thermometer. 2. Solve differential equations using Laplace transforms, including finding the inverse Laplace transform of a function. 3. Define concepts like dead zone and derive transfer functions for things like a U-tube manometer. 4. Distinguish between feedback types and discuss methods like root locus. Describe instruments like a pressure spring thermometer. 5. Briefly describe industrial control systems and draw diagrams to explain liquid level measurement systems or control systems and determine related values.

Uploaded by

Jay PATEL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Seat No.: ________ Enrolment No.

___________

GUJARAT TECHNOLOGICAL UNIVERSITY


BE - SEMESTER–V(NEW) EXAMINATION – SUMMER 2022
Subject Code:3150504 Date:07/06/2022
Subject Name:Instrumentation and Process Control
Time:02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
4. Simple and non-programmable scientific calculators are allowed.
MARKS
Q.1 (a) Define step and input function. 03
(b) Find the Laplace transform of f(t) = 1 & f(t) = t 04
(c) Derive the transfer function of mercury thermometer. Determine the 07
response equation of mercury thermometer for step function.

𝑑𝑥
Q.2 (a) Solve + 3𝑥 = 0, 𝑥(0) = 2 03
𝑑𝑡

(b) Derive the transfer function for Interacting system. 04


(c) Solve the following differential equation by Laplace transform: 07
𝑑3𝑥 𝑑 2 𝑥 𝑑𝑥
+ 2 − − 2𝑥 = 4 + 𝑒 2𝑡
𝑑𝑡 3 𝑑𝑡 2 𝑑𝑡

x(0)  1, x' (0)  0, x''  1


OR
(c) Find the inverse Laplace Transform of the function: 07
4S  5
x ( s) 
S  12 ( S  2)

Q.3 (a) Define dead zone and dead time lag 03


(b) Explain Servomechanism type problem and Regulator problem 04
(c) Define second order system. Derive the transfer function of U-Tube 07
Manometer
OR
Q.3 (a) Derive transfer function for transportation lag. 03
(b) Define: overshoot, decay ratio, response time and period of oscillations. 04
(c) Write a note on Bellows differential pressure element with neat sketch. 07

Q.4 (a) Distinguish between Negative Feedback and Positive Feedback. 03


(b) Describe the importance of root locus method in brief. 04
(c) Discuss pressure spring thermometer with neat sketch. 07
OR
Q.4 (a) Highlight on hygrometer & hydrometer. 03
(b) Differentiate between Open loop and closed loop control system. 04
(c) Given the characteristic equation, determine the stability by the Routh 07
criterion
s4 + 3s2 + 5s2 + 4s + 2 = 0

Q.5 (a) Describe PLC, DCS, and SCADA in brief. 03


(b) Describe the bubbler system for liquid level measurement with neat 04
sketch.
1
(c) The set point of the control system shown in figure below is given a step 07
change of 0.1 unit. Determine: (a) The maximum value of C and (b) The
offset.

+ 5/[(s+1)(2s+1)]
R Kc=1.6 C
-

OR
Q.5 (a) Write significance of gain margin and phase margin. 03
(b) What is offset? Explain P, PI and PID controller. 04
(c) Plot the bode diagram for the system whose overall transfer function is 07
1/(s+1)(s+5)

*************

You might also like