PACKAGE LIST
T10
True Wireless Earbuds
User Manual User Manual
Wireless Earbud * 2
User Manual * 1
Magnetic Charging Case * 1
Ear Tips * 3 (S/M/L) Type-C Charging Cable * 1
IMPORTANT NOTES TOUCH CONTROL
1 Register your product on www.tranya.com to get an EXTRA three-month
warranty for free. Play / Pause Press and hold for
2 Before using the T10 wireless earbuds, please charge both the case and 1” 1 second (L/R)
L/R
earbuds.
3 We provide three pairs of rubber eartips (including the set installed on the
earbuds), please choose the best fit for you. Next/Previous track Tap three times (R/L)
3 3
R L
Volume up/down Tap twice (R/L)
2 2
L M S L
R
Activate Siri/other voice Tap 4 times(L/R)
4 If both earbuds don't sync together, please reset the earbuds. control software
L/R 4
5 If the earbuds don’t charge, please clean the charging slot on the case
and the contact surface on the earbuds. Press and hold for
Reject/End a call
1 second (R/L)
L/R 1”
Answer a call Tap (L/R)
L/R 1
Game Mode
POWER ON
( Automatically return to normal mode Tap 5 times(R)
after power off ) R 5 L R
Normal Mode/ Press 5 times(L)
Bass Boosted Mode L 4”
Manually
Automatically (Long press and hold for 4 seconds)
POWER OFF
Switch Sound Effects L R
Two different sound effects on the T10: Normal Mode and Bass Boosted Mode.
The Normal Mode is for those who prefer a sound with bright vocal and crisp
treble. The Bass Boosted Mode is for those who prefer a warm, heavy bass. 4”
Manually
Automatically (Long press and hold for 4 seconds)
Note: When the charging case is at low battery or out of power, the earbuds will
not automatically power on/off, please turn them on/off manually.
WEARING CHARGING
1 Charging the Earbuds
Step 1 Put the earbuds Step 2 Rotate the earbuds to
into your ears. auricle side to fit snugly.
CONNECT THE EARBUDS
2 Charging the Case
25%
25%-50%
Tranya T10
50%-75%
100%
Step 1 Power on the earbuds and Step 2 Select “Tranya T10”
turn on the Bluetooth in your phone. and confirm.
HOW TO RESET THE EARBUDS FAQ
If your earbuds stop syncing with each other, please follow the below
Q: Why does signal interruption occur in some
steps to reset the earbuds：
places, such as along the railway and the airpot?
1 Pick up both earbuds and turn them off; A: There are usually lots of underground cable
lines along the places mentioned above, which
2 Press and hold BOTH earbuds up to 6-8s until the red lights blink; might cause electonmagnetic interference and
result in the siganal interruption.
Q: My earbuds don't charge, what can I do?
6-8”
A: Please try to follow the below steps:
1. Clean the charging slot 2. Clean the charging
3 The earbuds will sync together and enter the pairing mode automatically. on charging case. connector on earbuds.
FAQ
Q: Why my earbuds don't power on/off
automatically?
A: The earbuds would not power off automatically
when the case is at low battery or out of power.
Please recharge the case. And you can long press
for four seconds to power on and long press
for four seconds to power off the earbuds.
Q: Will the Bluetooth mouse cause the
signal interference?
For more information, please visit:
A: Perhaps. When your Bluetooth mouse and
earbuds are connected to the same device, it www.tranya.com
might happen.
For any assistance, email us:
[email protected] Made in China
