C- 155 C-170S (50 Hz)

Gensets
Medium Range

Ratings @ 0.8 PF Prime Rating Stand-by Rating

Voltage* 1 Frequency* 2
CT155* 3
CT170S* 4

230/400 V 50 Hz 155 kVA 170 kVA

The above ratings represent the generating set capability guaranteed within ±3%
at the reference conditions equivalent to those specified in ISO 8528/1 standard.

Notes Engine Technical Data

1. The applicable voltage range is 380V to Make & Model CUMMINS 6BTAA5.9-G7
415V for 50Hz applications. For other
voltages, please consult factory.
Cylinders & Arrangement 6; in-line
Bore & Stroke (mm) 102 x 120
2. This generating set is of fixed speed of
1500 rpm.
Induction system Turbo Charged & Aftercooled
Combustion Direct injection
3. C-155 is the prime power rating of
the generating set is where a variable load Cycle 4 stroke
and unlimited hour usage are applied Compression ratio 16.5:1
with an average load factor of 80% of
Cooling System Water cooled
the prime rating over each 24-hour
period. Noting that a 10% overload is Displacement 5.9 liters
permitted for 1 hour in every 12-hour Lube oil capacity 16.4 liters Max
operation.
Coolant capacity 9.1 liters
4. C-170S is the standby power rating Standard governor (Optional) Electronic
of the generating set is where a variable
load limited to an annual usage up to 500 Engine Speed 1500 rpm
hours is applied, with 300 hours of which Fuel Consumption (L/H) @ 100% Load 35 @ 50% Load 18
may be continuous running. Noting that no
Fuel Consumption (L/H) @ 75% Load 27 @ 25% Load 9
overload is permitted.
Radiator Cooling Air Flow (m3/s) 2.7
Emissions regulations For non-regulated territories
Exhaust temperature oC (max) 519
3/min)
29.9
- The complete Generating Set is
type-tested according to ISO
Max. allowed back pressure (kPa) 10.25
8528-8 Standard.
The above performance data are valid as per the following specs:
- The control panel is
• Diesel Fuel is according to BS2869 Class A2 or equivalent.
certified by an ISO 17025
• Lubricating oil is according to Grade SAE 15W-40 API CI4.
accredited laboratory to
• The coolant should be 50% antifreeze and 50% fresh water.
GI S
T RA R UNITED
R
E
ACCREDITATION
FOUNDATION
L

have IP55 according to

E
RI
GA B

ISO
900 1
REGISTERED

IEC 60355 CB-MS-51707270105

Dimensions Alternator Technical Data LSA

Length 2500 mm Make & Model TAL044J
Width 950 mm Frequency / No. of poles 50Hz / 4P Winding pitch 2/3
Ingress protection IP23 R120 MX321
1
AVR model
2

Height 1550 mm Insulation class H Overspeed 2250 R.P.M.

Weight 1100 Kg Terminals (Optional) 6 (12) Voltage regulation ±1%
Excitation system SHUNT 0.25 m 3/s

UAE - Rich Motor Co. FZE Hamriyah Free Zone, Phase II, Sharjah, UAE - Tel: +971 6 526 9111 Fax: +971 6 526 9431 - P.O.Box: 49353 Sharjah.
Nigeria - 37, Warehouse Road, Apapa, Lagos - Tel: +234 706 890 9333 - Email: [email protected]
Saudi Arabia Rabigh Industrial City, Yanbu Highway, Exit 927, Petro Rabigh Bridge, Rabigh, KSA. Tel: +966 58 373 6543 E-mail: [email protected]
 C-155 C-170S (50 Hz)
Gensets
Medium Range

Construction
DSE 6020MKII panel is an automatic Sheet Fabrication CNC shearing & bending
start generating set panel of microprocessor-based Heat-treated powder-coated
Paint type
design which is capable of interfacing with
electronic engine through the can-bus J1939. It is Paint application Electrostatic corona spraying
• IMPACT [EN ISO 6272]
software as well Durability tests • Salt spray resistance [ASTM B117-73]
• Humidity Resistance [ASTM D2247]
Circuit Breaker Schneider ABB LS, 3 Pole MCCB (4
• Panel is compliant with [ISO8528-8]
Pole available as Optional)
• Clearance & Creepage [IEC60355-1]
Compliance
• Leakage current & Dielectric strength [IEC60355-1]
• Protection against electric shock [IEC600 364-4-41]
Degree of protection IP55
• Crimping force up to 20KN
Wire crimping • Accuracy of 0.01mm
• Each crimping is checked by Komax CFA+
• Wires are coded by wire color and cross-section
Wire coding
• Wires are coded by printed numbers
• Wires are coded by printed function of the wire

Protection (OPTIONAL Note 1 ,3)

Control (OPTIONAL Note 1)
Instrumentation
(standard) (standard) (standard) (OPTIONAL Note 1 ,3)
Over /Under AC voltage High oil temperature Remote start input Battery Changer:5A, 10A , UL Gen AC Voltage: 3ph VLL & VLN Lube oil temperature

Over /Under frequency High exhaust temperature Emergency Stop button Fuel pump control Gen Frequency: Hz Exhaust temperature

Delayed Over current Low fuel pressure Common Alarm volt-free contactExtension: Gen Current: 3 phase A Engine Inlet air (Boost) pressure

Short-circuit Low coolant pressure Event log (50 events) Ethernet –Modbus TCP Power: KW, KVA, KVAR & PF Charging ammeter

Over KW Low fuel level Weekly Exerciser RS485- Modbus RTU Energy: KWhr, KVAhr, KVARhr Fuel pressure

High Engine Temperature Low oil level Audible Alarm Webnet – GPS tracker Lube Oil pressure Coolant pressure

Low oil pressure High winding temperature Standard CANbus J1939 Water in Fuel Detection. Engine coolant temperature Fuel level

Maintenance Alarm High bearing temperature Preheat control Battery DC Voltage Lube oil level

High/Low Battery voltage Low boost pressure DC Alternator Voltage Winding temperature 3xRTD

Low coolant level Note 2 Fusible link fire protection Engine Speed Bearing temperature RTD

Low coolant temperature Operating hours

Note 1: some OPTIONAL features could be standard if CANbus is established within electronic engines.
Note 2: Low coolant level protection is standard feature for Gensets above 200KVA, otherwise it is optional.
Note 3: There is limitation in the number of protections and measurements that can be o red with GMP260MK.

Other types of control Panels & Modules can be o red according to required specifications (DSE 7310/20, 7410/20, 8610, 8810 and Others).

UAE - Rich Motor Co. FZE Hamriyah Free Zone, Phase II, Sharjah, UAE - Tel: +971 6 526 9111 Fax: +971 6 526 9431 - P.O.Box: 49353 Sharjah.
Nigeria - 37, Warehouse Road, Apapa, Lagos - Tel: +234 706 890 9333 - Email: [email protected]
Saudi Arabia Rabigh Industrial City, Yanbu Highway, Exit 927, Petro Rabigh Bridge, Rabigh, KSA. Tel: +966 58 373 6543 E-mail: [email protected]
 C-155 C-170S (50 Hz)
Gensets
Medium Range

Genset Standard Features

Assembly:
Gensets are assembled at Rich Motor Company in compliance with ISO 8528-8 standard.

Fabrication:
- The engine/alternator assembly rests on skid with Anti-vibration mounting pads.
- The skid is made up of durable sheet metals and beams exceeding “Vibration & Torsion”
Resistance Norms.

- The control panel enclosure is made up of metal sheet .

Paint:
-The skid and control panel enclosure are painted with heat-treated and power-coated
electrostati corona spraying.
- Paints passed durability tests conforming to international quality standards.
- Impact (EN ISO 6272)
- Salt Spray Resistance (ASTM B117-73)
- Humidity Resistance (ASTM D2247)
Genset Optional Features
Works-Testing:
- All Gensets are tested prior to dispatch. - Manual & Automatic Transfer Switches,
- Test is automatically generated and checked according to ISO8528 - Synchronizing & Totalizing Panels
- Fuel water separator
- Water jacket heater
Equipment: - Oil heater
- Water cooled Radiator with belt driven blower fan and full guarding - Fuel heater
- Electric starter with solenoid Relay - Battery heater
- Battery Charging Alternator
- Anti-condensation Heater
- Energized to run solenoid

- Heavy duty leads acid battery with matching capacity (Amps & CCA) - Oil Sampler
- One loose supplied industrial exhaust silencer – 16 DB noise reduction level. - Pre-lube Oil Pump
- Integral Fuel Tank with 150 L capacity.

Documentation: Dimention and weight

- User Manual for Operation, Installation and Maintenance guidance
- Wring Diagram. Normal : L365 W
110
H
165
KG 1900
- Test Report
390 165
- Maintenance Schedule Super : L W
120
H KG 2300
- Catalogues for Engine, Alternator & AVR 200 100 140
Open type : L W H KG 1200

UAE - Rich Motor Co. FZE Hamriyah Free Zone, Phase II, Sharjah, UAE - Tel: +971 6 526 9111 Fax: +971 6 526 9431 - P.O.Box: 49353 Sharjah.
Nigeria - 37, Warehouse Road, Apapa, Lagos - Tel: +234 706 890 9333 - Email: [email protected]
Saudi Arabia Rabigh Industrial City, Yanbu Highway, Exit 927, Petro Rabigh Bridge, Rabigh, KSA. Tel: +966 58 373 6543 E-mail: [email protected]