AGAR CORPORATION
Process Measurement & Control
OW Plus Series
The Agar OW Plus is based on the OW-200 watercut meter, operating in multiphase flow conditions and
continues the long tradition of excellence in multiphase technologies provided by Agar for over 20 years.
ADVANTAGES OF THE AGAR OW PLUS SERIES INCLUDE:
Gas void fraction 0-99%
Watercut 0-100%
Not affected by flow regimes
High accuracy, real-time flow measurement
High and low viscosities
Microwave based, non-nuclear (radioactive) sources
Compact, portable and easy to transport and install
OW Plus
Standard In-Line
www.agarcorp.com
All Agar Corporation Instruments are covered by one or more of the following U.S. Patents: 4,503,383; 4,774,680; 5,099,697; 5,101,163; 5,101,367;
5,263,363; 5,503,004; 5,551,305; 5,589,642; 5,741,977, RE 36,597. Other patents pending in the USA and other countries.
OW Plus Series Features
The Agar OW PLUS combines Agar’s advanced coriolis technology with Agar’s field proven watercut
measurement to achieve superior accuracy in the GVF range of 0-99%.
The Agar OW PLUS monitor is capable of measuring watercuts at the range of 0-100%, without salinity effect.
The Agar OW PLUS is a watercut measurement
solution in multiphase condition, used for field and well
optimization, capable of handling all flow regimes.
OW PLUS COMPRISES THE FOLLOWING PRIMARY SUBSYSTEMS:
The Density Measurement is based on Coriolis and other ancillary sensors. Engineering advances
allow Agar to utilize these sensors at extended operating multiphase flow ranges. The density data is
fed into the Agar Data Analysis System (DAS), which determines the Gas Void Fraction.
The Agar watercut meter (OW-201) is used to measure water content accurately over the full range
of 0-100% in both oil and water-continuous phases. Accuracy is not affected by changes in velocity,
salinity, pH, viscosity, temperature or density. Watercut monitor data is fed into the DAS and used to
determine multiphase watercut.
The Agar Data Analysis System (DAS) performs on-line analysis of data acquired from the above
sub-systems to determine the watercut by %. It supports a variety of PVT calculations that convert the
process conditions to standard conditions. It also has the ability to accept user-defined PVT relations.
World-Class Process Measurement & Control Solutions
OW PLUS General Specifications
PERFORMANCE
Gas Void Fraction 0 to 85% (In-Line Model)
0 to 99% (Bypass Model)
Watercut 0 to 100%
Line Sizes 2” through 6”
Consult factory for other sizes.
Flow Regimes All (e.g. Bubbly, Wavy, Slug, Annular, etc.)
Pressure Up to 10,000 PSI
Ambient Temperature -4°F to 160°F (-20°C to 70°C)
Optional Low Temp: -40°F to 160°F (-40°C to 70°C)
Process Temperature Standard Model: 32°F to 212°F (0°C to 100°C)
High Temperature Model: 32°F to 572°F (0°C to 300°C)
Liquid Viscosity 0.1-2000 cP
High Viscosity available upon request
Salinity 0 to 30% NaCl by weight (up to saturation)
Sand/Particles Up to 5% by volume and less than 1 mm particle size
Maximum Pressure Drop Less than 5 psi at line size 2”- 6”
Wetted Parts Standard: 316 Stainless Steel
Hastelloy and other materials available on special order; According to
ASME B31.1 and B31.3. PEEK; Ceramics Isolators; NACE compliant
www.agarcorp.com
OW PLUS General Specifications
PREFERRED INSTALLATION: Vertical upward flow
ELECTRICAL:
Power Supply: 24 VDC, 110 & 220 VAC
Power Requirements: 80 Watts for basic option (lower power options available upon request)
SAFETY CERTIFICATIONS:
ATEX: II 2(1)G EEx d [ia] IIB T4
UL/C-UL - Class 1, Division 1, Group C&D, T6
ROSTECHNADZOR (Russia, CIS), GOST-R, Metrology Pattern Approval
DATA COMMUNICATION (STANDARD AND OPTIONAL):
Standard: 3 x 4-20 mA (% water, temperature and GVF/Density)
Standard: RS485 or RS232 with MODBUS Protocol
Standard: RS232 communication with laptop or industrial PC using Agar WINDOWS application, optional ethernet
connection.
Optional: Modem or wireless communication
TYPICAL DIMENSIONS:
Approximate weight for 6” meter: 440 lb (200 kg)
Approximate dimensions (F/FXWXH): 30” X 20” X 50” (76 cm x 51 cm x 127 cm)
HEADQUARTERS - CAYMAN ISLAND: Agar Corporation, LTD ● P.O. Box 10206 ● Grand Cayman, BWI KY1-1002 ● Tel: (345) 945-5242 ● [email protected]
USA Agar Corporation; 5150 Tacoma Drive; Houston, TX 77041; Tel: (832) 476-5100; Fax: (832) 476-5299; [email protected]
CANADA Agar Canada Corp; Unit 120, 3510 29th St NE; Calgary, AB T1Y7E5; Tel: (403) 718-9880; Fax: (403) 450-8350; [email protected]
COLUMBIA Agar Colombia; SAS Carrera 19 No. 19-13, Of. 304; Bogotá, Columbia; Tel: +57 1 646-965; [email protected]
®
®
ECUADOR Agarcorporation Ecuador C.A.; Av. 12 de Octubre; N24-739 y Av. Colon Edif. Torre Boreal; Piso 6, Oficina 609; Quito Ecuador; Tel: +593 2 6007370; [email protected]
INDONESIA Pt Agar Indonesia; JL Raflesia No. 3 Blok C A19 Ciputat Baru; 15413 Ciputat Indonesia; Tel: +62-21-740-9210; [email protected]
MALAYSIA Agarcorp Sdn Bhd, ACSB; Jalan 5/106, Bandar Sri Permaisuri; A-4-1, Plaza Dwitasik; 56000 Kuala Lumpur; Malaysia; Tel: +603-9171 7069; Fax: +603-9173 8069; [email protected]
SAUDI ARABIA - Al Khobar Agar Corporation Ltd; Nayef Building no-01 (Flat no -10); Prince Nayef Street/22nd St cross; Al Shamaliyah, Al Khobar; Saudi Arabia; Tel: 966-501066418; [email protected]
SAUDI ARABIA - Jeddah Agar Corporation Ltd; Al Faisaliah Building; Imam Abdul Aziz Street; Jeddah - 21753; Saudi Arabia; Tel: 966-501066418; [email protected]
UAE Agar Corporation (ACAD); 1505, Three Sails Tower; Corniche, Khalidiya; Abu Dhabi, UAE; Tel: 971-2681-1150; [email protected]
VENEZUELA Agarcorp de Venezuela C.A.; Avenida Jesus Subero; El Tigre, Anzoategui; 6050 Venezuela; Tel: +58-261-324-5789; [email protected]
AGAR CORPORATION www.agarcorp.com
© Agar Corporation Inc. All rights reserved. Specifications may be changed without notice. ER No. 5485: ACI-A-7.2-DOC-009 Rev-02
