POST. OF' ASSISTANT TRAIN.

ING OFFfCER (STENOGRAPHY-ENGLISH) IN

TAMIL NADU EMPLOYMENT TRAINING SUBORDINATE SERVICE AND
JUNIOR TECHNICAL ASSISTANT IN TEXTILE DEPARTMENT IN TAMIL NADU
GENERAL SUBORDINATE SERVICE.

COMPUTER BASED TEST

PAPER - I - HANDLOOM TECHNOLOGY I TEXTILE TECHNOLOGY I TEXTILE MANUFACTURE
(DIPLOMA STANDARD)

1. The fibre not used for producing flame resistant fabrics is

(A) Nomex
(B) Mod acrylics
(C) Glass
1J!lf Nylon
(E) Answer not known

2. The Shrinkage control treatment for woven fabric is done in -----

process
(A) Shearing
(B) Brushing
JI!!{ Sanforising
(D) Compacting
(E) Answer not known

3. chemical finish provide both oil and water repellency

properties to fabric
(A) Paraffin
(B) Stearic acid - melamine
(C) Silicone
Jlil{ Fluorocarbon
(E) Answer not known

3 Haridloom Technology I Textile

Technology I Textile Manufacture
[Turn over
4. The widely used catalyst in pigment printing is
(A) Trisodium phosphate
(B) Zinc oxide
f,lil'f
Diammonium phosphate
(D) Ammonium hydroxide
(E) Answer not known

5. Name the hygroscopic agent used in printing process

(A) Carriers
(B) Starch
Vf!( Glycerine
(D) Sodium Alignate
(E) Answer not known

6. The chemical used in carrying out oxidation in printing of cotton fabric

with vat dye is
(A) Sodium chloride
(B) Soda ash
(C) Sodium hydroxide
JJ!/r Hydrogen peroxide
(E) Answer not known

7. Knitted fabric in rope form can be dyed in

i,,Jt!!" Jet
dyeing machine
(B) Drum dyeing machine
(C) HTHP dyeing machine
(D) Garment dyeing machine
(E) Answer not known

Handloom Technology I Textile 4

Technology I Textile Manufacture
8. The speed of 3 bowl padding mangle is
9'f' 200 yards/min
(B) 300 yards/min
(C) 50 yards/min
(D) 80 yards/min
(E) Answer not known

9. In which of the following class of Direct dyes, do not require salt for their
exhaustion
Jiff' .
Self- levelling dyes
.
(B) Salt-controllable dyes
(C) Temperature - controllable dyes
(D) Salt and Temperature controllable dyes
(E) Answer not known

10. ----- process is carried out to overcome the faulty dyeing

(A) Oxidation
fl!!f Stripping
(C) After treatment
(D) Hot wash
(E) Answer not known

11. Cold brand reactive dyes has ----- chlorine atoms

(A) One
pt!" Two
(C) Three
(D) Nil
(E) Answer not known

5 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
12. High pressure steam method of setting is not recommended for polyester
fabric due to
(A) High level of dimensional steability
Loss of weight
(B)
<JI( Loss of tensile strength and discolouration
(D) Loss of Length
(E) Answer not known

13. dyes are water soluble and are mainly used to dye the
acrylic fibers
·(A) Direct
(B) Acid
j!f{ Basic
(D) Vat
(E) Answer not known

14. The increase in fibre diameter percentage of cotton due to swelling when
treated with sodium hydroxide is
(A) 97%
(B) 64%
(C) 53%

~ 78%
(E) Answer not known

Handloom Technology I Textile 6

Technology I Textile Manufacture
15. gives a silk-like brilliance to mercerized cotton fabrics
(A) Chasing calendering
(B) Friction finish
Vl!J Schreinering finish
(D) Embossing calender
(E) Answer not known

16. Active bleaching species in the chlorite bleaching mechanism is

Vf{ · Cl02
(B) 02
(C) H+
(D) HOO-
(E) Answer not known

17. Sunlight is a principal bleaching aid for----- material

(A) Cotton
(B) Wool
Jll!f' Linen
(D) Silk
(E) Answer not known

18. The machine used for scouring process is

(A) Stenter
(B) Sanforizing machine
(C) Calendering machine
J/flf Kier
(E) Answer not known

7 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
19. Find in correct statement
(A) Cotton contains 0.5% of oil and wax
(B) Raw wool contains around 50% of wool grease
Jii!{Wool will not degrade by alkali treatment
(D) Sodium hydroxide not used in wool scouring
(E) Answer not known

20. Identify the oxidative method of desizing

(A) Acid steep ·
.pf Bromite
(C) Enzymatic
(D) · Rot steep
(E) Answer not known

21. The fabric grainline preferred for cowl neckline and drape closer to the
body is
(A) Lengthwise grain
(B) Crosswise grain
jjil/" Bias direction
(D) Off-grain
. (E) Answer not known

Handloom Technology I Textile 8

Technology I Textile Manufacture
22. sewing defect is araised when the hook or looper fails to
pickup the loop in the needle thread.
J,,Jl!1'
slip stitch
(B) staggered stitch
(C) variable stitch density
(D) unbalanced stitch
(E) Answer not known

23. The recommended spreading manner of fabric for asymmetrical pattern

18

(A) Face-to-face ·
(B) Crosswise fold
(C) Lengthwise fold
J;l!'f" Face up or face down
(E) Answer not known

24. In a flat pattern technique, the darts are shifted to the desired position
by cutting and spreading is called
jiff Pivot method
(B). Slash and spread method
(C) Measurement method
(D) Pattern grading
(E) · Answer not known

9 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
25. Class 200 stitch is known as
(A) Chain stitch
(B) Lock stitch
(C) Multithread chain stitch
J;i!!'f Hand stitch
(E) Answer not known

26. The most suitable cutting machine for Embroidery applique is

(A) Die-cutting
/jll{" Laser ClJ.tting
(C) Band knife cutting
(D) Straight knife cutting
(E) Answer not known

27. The tool which is inserted into the collars or seams to get pointed edges
18

(A) Needle threader

(B) Pins
Jlil/'
Orange stick
(D) Dorn needle
(E) Answer not known

28. Thimble is a device used for

(A) To fix the pattern on the cloth
(B) To cut the fabric
( C) Used for darning of cloth
JilffProtect the finger while hand sewing
(E) Answer not known

Handloom Technology I Textile 10

Technology I Textile Manufacture
29. Choose the cutting machine for higher standard of cutting accuracy
(A) Straight knife
(B) Hand shears
(C) Round knife
Jli!l1' Band knife
(E) Answer not known

30. Less extensible knitted fabric is

(A) Single jersey
(B) Rib
°j,jl!f' Inter lock
(D) Purl
(E) Answer not known

31. Which laps are heavier, more compact, more opaque and less extensible
in warp knitting?
(A) Over lap
(B) Under lap
(C) Closed lap
iJit{ Open lap
(E) Answer not known

32. In the cam track arrangement, which cam can be a adjustable one?
(A) Guard cam
fJlff'
Stitch cam
( C) Upthrow cam
(D) Running cam
(E) Answer not known

11 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
33. The term 'links-links' is related to which of the following weft knitted
structure
(A) Plain
/l!lf' Purl
(C) Interlock
(D) Rib
(E) Answer not known

34. In which direction loop formation takes place in weft knitting?

~ horizo~tal direction
(B) vertical direction
( C) cross direction
(D) diagonal wise
(E) Answer not known

35. In knitting cycle, the part of sinker holds the yarn during loop formation
at
(A) Belly
(B) Butt
(C) Neb
Jli!ff Throat
(E) Answer not known

Handloom Technology I Textile 12

Technology I Textile Manufacture
36. is irreversible fabric.
i,Jlf'
Single Jersey
(B) Rib
(C) Interlock
(D) Purl
(E) Answer not known

37. Choose the correct statement:

· (i) Rib has a vertical cord appearance
(ii) 1x1 rib has the appearanc.e of the technical face of plain fabric on
both sides
(iii) Interlock has the technical face of plain fabric on both sides
(A) Option (i) only
(B) Option (i) and (ii) only
Jii!f
Option '(i), {ii) and (iii) only
(D) Option (ii) and (iii) only
(E) Answer not known

38. The needles are withdrawn/descends, so that the new loop is drawn
through the old loop is called
(A) Yarn feeding
(B) Clearing.
JP( Knock-over
(D) Holding-down
(E) Answer not known

13 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
3 9. The function of sinker is
(A) To give upward movement to needle
(B) To give downward movement to needle
Jli!!f' To hold down formed stitches
(D) To close the latch
(E) Answer not known

40. Courses are

j;I/"'rows of loops across the width of the fabric
(B) vertical column of needle loops
(C) loops across rows and vertical
(D) loops across vertical and rows
(E) Answer not known

41. ··The acceptance criteria for 4-point system of fabric inspection is

(A) 4 points I 100 square yard (B) 14 points I 100 square yard
~ 40 points I 100 square yard (D) 400 points I 100 square yard
(E) Answer not known

42. When An = Area of the specimen, Ad = Area of the supporting disk and
As = Actual projected area of the specimen, calculate drape coefficient:

(A) [An -As]+[An -Ad] (B) [An -Ad]+[An -As]

(C) [An -Ad]+[As -Ad] ¢{'[As -Ad]+[An -Ad]
(E) Answer not known

Handloom Technology I Textile 14

Technology I Textile Manufacture
43. Bundesmann test is used to measure
(A) Fibre strength (B) Fibre fineness
(C) Fibre maturity {Jl'f'Water repellency
(E) Answer not known

44. The fabric test length in case of strip test is

(A) 10 inches (B) 12 inches
(C) 6 inches <,f 8 inches
(E) Answer riot known

45. In staple fibre yarn, when the yarn twist increases, yarn strength will
(A) Increases
(B) Decreases
fl!/!' Increases after certain level Decreases
(D) Decreases· after· certain level Increases
(E) Answer not known

46. In the CRE principle of fabric/yarn testing, as the specimen length

increases, what will happen
{JI!'
Rate of loading decreases
(B) Rate of loading increases
(C) No change in rate of loading
(D) Rate of loading increases and then decreases
(E) Answer not known

15 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
4 7. How many coils are there in the lea of 408 cotton yarn?
(A) 60 l,l!fj 80
(C) 100 (D) 120
(E) Answer not known

48. Yarn diameter is proportional to

(A) Directly proportional to yarn count
(B) Indirectly proportional to yarn count
(C) Reciprocal of yarn count
J}ilf Reciprocal of the square root of the count
(E) Answer not known

49. The instrument used for estimating fibre trash content is

(A) Baer sorter · (B) Stelometer
(C) Uster Trash Collector VJ!f Shirley trash analyser
(E) Answer not known

50. Cotton maturity is mainly affected by

(A) Primary wall thickness J!I!{ Secondary wall thickness
(C) Tertiary wall thickness (D) Lumen
(E) Answer not known

51. The Sheffield Micronaire is an instrument to estimate

(A) Fibre Length (B) Fibre Strength
J,lil'f" Fibre Fineness (D) Fiber Colour
(E) Answer not known

Handloom Technology I Textile 16

Technology I Textile Manufacture
52. An alternative term for tenacity is
(A) Breaking load (B) Breaking length
(C) Breaking extension jjll'f Specific strength
(E) Answer not known

53. Expand PI
jiff' Pressley Index (B) Pressley Industry
(C) Pressley Installation (D) Pressley Inertia
(E) · Answer not known

54. The water contact angles of four different cotton fabrics are given below.
Which one has the highest wettability?
~ 60° (B) 80°
(C) 90° (D) 120°
(E) Answer not known

55. The weight of water present in a unit volume of moist air is

¢' Absolute humidity (B) Relative humidity
(C) Standard atmosphere (D) Testing atmosphere
(E) Answer not known

56. The technique used for homogeneous fibre sampling is

(A) Tong sampling Jll!f'Zoning technique
(C) Cut squaring technique (D) Squaring technique
(E) Answer not known

17 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
57. The data are presented as a series of rectangles erected over the
horizontal scale is called
(A) Bimodal frequency distribution
/Jl!f'J" Histogram
(C) Bell shaped distribution curve
(D) Skew distribution curve
(E) Answer not known

58. Calculate percentage of accuracy P, when "V" coefficient of variation

and "N" number of tests at 95% confidence Interval.
(A) i.96 VxN (B) i.96 V +N
(C) 1.96 Vxffe ,r 1.96 V +ffe
(E) Answer not known

59. The formula for the mode is

(A) Median - 3 (Median - Mean) Jil!f
Mean - 3 (Mean - Median)
(C) Mean-Median (D) Median- Mean
(E) Answer not known

60. Calculate the standard deviation (SD)

(If I:(x -x)2 = 113.60 and n = 10)

(A) 2.96 (B) 3.24
gl!{ 3.55 (D) 3.87
(E) Answer not known

Handloom Technology I Textile 18

Technology I Textile Manufacture
61. According to the pigment theory of colour, the secondary colours are
(A) Red, Green, Blue (B).)led, Yellow, Blue
(C) Russet, Citron, Olive {;[ Green, Purple, Orange
(E) Answer not known

62. Identify the traditional designs where the devnagari alphabets are
woven
(A) Bandhani (B) Kasuti
Jlillf"' Pa tola (D) Ph ulkari
(E) Answer not known

63. The property required for wound care medical textile is

(A) Strength (B) Compression
(C) Elongation ~Absorbent
(E) Answer not known

64. Which one of the material is not related to implantable materials?

(A) Sutures (B) Vascular grafts
JP( Plaster (D) Artificial joints
(E) Answer not known

19 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
65. Airbags used in the car should possess the following. properties
(i) High tear strength
(ii) High bursting strength
(iii) High permeability
(iv) High flexibility
(A) (i) and (ii) only (B) (i), (ii) and (iii) only
Vi'!" (i), (ii) and (iv) only (D) (ii), (iii) and (iv) only
(E) Answer not known

66. The textile fibre suitable for Ballistic protection is.

(A) Bast ¢' Aramid
(C) Olefin (D) Rayon
(E) Answer not known

67. The non-implantable material used in wadding is

(A) Cotton and Nylon ¢'viscose
(C) Polyester (D) Acrylic
(E) Answer not known

68. The material used in car seat cover is

(A) Carboxy cellulose (B) Polyvinyl chloride
Jll!f Polyurethane (D) Acrylic
(E) Answer not known

Handloom Technology I Textile 20

Technology I Textile Manufacture
69. Indentify the fiber used for wound treatment.
(A) Spandex ¢{ Calcium Alginate
(C) Lyocell (D) Nylon
(E) Answer not known

70. Geogrid is mainly used for

(A) Sedimentation control (B) Erosion control
( C) Drainage jl{ Steep slopes and stabilization
(E) Answer not known

71. Tenacity of kevlar fibre (gpd)

(A) 0.5 - 0.7 (B) 3 - 5
jj,I{ 18 - 25 (D) 200 - 250
(E) Answer not known

72. The air bag is designed to inflate with in milliseconds

(ms)
(A) 10 ms (B) 20 ms
(C) 30 ms Jllf( 40 ms
(E) Answer not known

73. Among the following techniques which is used to development of tennis

court surfaces.
(A) Needle punching ~titch bond
(C) Thermal bond (D) Chemical bond
(E) Answer not known

21 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
7 4. Thermal bonded fabrics are produced by using
(A) Water ¢'Heat in a variety of ways
(C) Oil (D) Kerosene
(E) Answer not known

75. The process is not used for manufacturing of different types of non
wovens.
(A) Mechanical bonding (B) Chemical bonding
( C) Thermal bonding ~ Knitting
(E) Answer not known

76. The Binder used for manufacturing chemical bonded non-woven fabric is
(A) Pantex 'I!( Latex
(C) Spantex · (D) Tantex
(E) Answer not known

77. The type of knitting machine used for stitch bonding is

(A) Weft knitting machine (B) Circular knitting machine
(C) Flat knitting machine pJf Warp knitting machine
(E) Answer not known

78. The type of needle used to produce needle punched non woven fabric is
l,Jl/1'
Barbed needle (B) Latch needle
(C) Compound needle (D) Flat needle
(E) Answer not known

Handloom Technology I Textile 22

Technology I Textile Manufacture
79. Needle-punched fabrics are produced when barbed needles are pushed
through a
¢ Fibrous cross - laid web (B) Sliver
( C) Lap (D) Roving
(E) Answer not known

80. Air-laid fabrics can have strength ratios as high as

(A). 1: 1 (B) 1.5: 1
(C) 1.8: 1 ¢{2.5: 1
(E) Answer not known

81. With respect to waste water heat exchangers, the plate heat exchangers
is having a heat transfer efficiency of times higher than
shell-and-tube heat exchangers.
(A) 1 to 2
(B) 6 to 8
(C) 9 to 12
jJil'( 3 to 5
(E) Answer not known

82. The average energy use in the textile industry and energy consumption
varies from of electricity per Kilogram of yarn in a
modernised spinning mill.
(A) 1 to 2.5kwh
Jlilf" 3 to 3.5 kwh
(C) 5 to 6.5 kwh
(D) 7 to 8 kwh
(E) Answer not known

23 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
83. Identify the process which removes both dissolved Ions and suspended
solids/particles with greater efficiency
(A) Aerobic treatment
(B) Anaerobic treatment
JPf" Membrane filtration
(D) Ion exchange
(E) Answer not known

84. Air pollution is caused by transportation of Vehicle is about

(A) 20%
(B) 40%
fl!( 60%
(D) 80%
(E) Answer not known

85. With respect to exim policies, DEPS stands for

(A) Duty entry passbook scheme
(B) Duty entitlement provision scheme
(C) Duty entitlement provident scheme
JJl!f Duty entitlement passbook scheme
(E) Answer not known

86. National Textile Policy was announced in the year

(A) 1999
Jl!/f
2000
(C) 2002
(D) 2003
(E) Answer not known

Handloom Technology I Textile 24

Technology I Textile Manufacture
87. In a spinning mill, the temporary removal of an employee can happen
due to
¢" Lay-off
(B) Strike
( C) Tran sfer
(D) Dismissal
(E) Answer not known

88. Leadership belongs to

(A) Technical Skill
VJ(' Social Skill ·
(C) Motivational Skill
(D) Personal Skill
. (E) Answer not known

89. The Deming cycle one of the quality control tool is also known as
jlf(PDCA cycle
(B) Juran's quality trilogy cycle
(C) Crosby's 14 steps
(D) Taguchis approach
(E) Answer not known

90. The quality control tool used in assessing the statistical process is
(A) Pareto chart
(B) Check sheet
v,Jf'
Control charts
(D) Scatter Diagram
(E) Answer not known

25 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
91. What are the standard I standards for which research support is offered
for processing and finishing industries in Textile Policy 2000?
(A) ISO 9000 and GOTS Standard
Jlil/'
ISO 9000 and ISO 14000
(C) ISO 14000 and SA 8000
(D) ISO 9000 and SA 8000
(E) Answer not known

92. Giving authority to one or more persons to undertake a particular job is

called as
· i,JI!"
Order writing
(B) Forecasting
(C) Tool control
(D) Loading
(E) Answer not known

93. Standard Allowed Minutes (SAM)

(A) [Seam length x machine speed] -=- stitches per Inch
flll'f'
[Seam length x stitches per Inch] -=- machine speed in rpm
(C) [Machine speed x stitches per Inch] -i- seam length
(D) Machine speed+ [seam length x stitches per inch]
(E) Answer not known

Handloom Technology I Textile 26

Technology I Textile Manufacture
94. Identify the following is related to assembly line system?
(A) Make through system
(B) Whole garment production system
¢"' Unit production system
(D) Modular production system
(E) Answer not known

95. Which statement I statements is/are correct about balance sheet?

(I) · Summarise the assets and liabilities
(II) Balances of ledger accounts carried forward to the next year
(III) Prepared before the preparation of profit and loss account
(A) (I) only
IJ!Jf'
(I) and (II) only
( C) (II) and (III) only
(D) (I), (II) and (III)
(E) Answer not known

96. The volume of sales or production where, there is neither profit nor loss
is known as
(A) Breakeven production
Jiii/'
Breakeven point
(C) Breakeven profit
(D) Breakeven process
(E) Answer not known

27 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
97. LOB means
(A) Liquid of Balance
Jl!!lf'
Line of Balance
(C) Limit of Balance
(D) Low of Balance
(E) Answer not known

98. Line type layout is also called as

(A) Combination layout
(B) Process layout
fll!'f
Product layout
(D) Fixed position layout
(E) Answer not known

99. layout is characterized by keeping similar machines or

similar operation at one location.
J,Jt/'
Process
(B) Product
(C) Combination
(D) Fixed position
(E) Answer not known

Handloom Technology I Textile 28

Technology I Textile Manufacture
100. Multifactor productivity (MFP) is given by
Output
MFP = ----------
Labour + Material + Overhead
Labour
(B) MFP = Ouput + Material + Overhead
Material
(C) MFP =
Ouput + Labour + Overhead
Overhead
(D) MFP =
Ouput + Material + Labour
(E) Answer not known

101. Two major types of textured yarns are

¢"' Stretch and bulk
(B) Long and short
(C) Thin and thick
(D) Wide and long
(E) Answer not known

102. In false twist texturisation method, the spindle rotates at a speed in the
range of
(A) 10,000 to 25,000 rpm
(B) 30,000 to 40,000 rpm
J,li!f' 50,000 to 1,00,000 rpm
(D) 1,25,000 to 1,80,000 rpm
(E) Answer not known

29 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
103. The melting point of polypropylene fibre is
(A) 170°C
(B) 180°C
Jli!f' 165°C
(D) 185°C
(E) Answer not known

104. A simple ester will be formed by the reaction of methyl (or) ethyl alcohol
reacts with
(JI{Acetic acid
(B) Minerals
(C) Alkaline
(D) Distilled water
(E) Answer not known

105. The polymerisation temperature of high density polyethylene is

(A) 50°C
·: !)ii{ 100°C
(C) 150°C
(D) 200°c
(E) Answer not known

106. Crystalline regions in a fibre can be expressed in terms of

j,;t{ Degree of Crystallinity
(B) · Degree of Amorphous region
(C) Degree of Temperature
(D) Degree of Drawing ratio
(E) Answer not known
Handloom Technology I Textile 30
Technology I Textile Manufacture
107. Match the following
(a) Wool 1. Meta cresol
(b) Polyester 2. Formic acid
(c) Nylon 3. Sodium hypochlorite

(a) (b) (c)

(A) 1 2 3
gi( 3 1 2
(C) 2 3 1
(D) 1 3 2
(E) Answer not known

108. The melting point of Acetate rayon fibre is

(A) 220°C
(B) 225°C
Vi1f 230°C
(D) 232°C
(E) Answer not known

109. Viscose rayon is produced in

(A) Melt spinning
jJil{ Wet spinning
(C) Dry spinning
(D) Rotor spinning
(E) Answer not known

31 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
110. Amount of Keratin present in wool fibre is
(A) 60- 80%
j}1f 45-75%
(C) 25 - 30%
(D) 10 - 20%
(E) Answer not known

111. The specific gravity of wool fibre is

(A) 1.20 gm/cc
jlilf' 1.30.gm/cc
(C) 1.32 gm/cc
(D) 1.36 gm/cc
(E) Answer not known

112. Percentage of Sericine in a Eri silk is

j;I!" 20 - 30%
(B) 8-10%
(C) 4- 5%
(D) 1- 2%
(E) Answer not known

113. Spiral angle of bast fibres (in degree) is

(A) 0
Jllf( 6
(C) 45
(D) 60
(E) Answer not known

Handloom Technology I Textile 32

Technology I Textile Manufacture
 114. The tensile strength of the Jute fibre is
(A) 4-5 gm/den
(B) 6-10 gm/den
(C) 7-8 gm/den
'Jlil( 5-8 gm/den
(E) Answer not known

115. Treatment of cellulose with oxidising agents in acidic, neutral (or)

alkaline solutions leads to the formation of
(A) Hydro cellulose
(B) Anhydro glucose
fP( Oxy cellulose
(D) Aldehyde
(E) Answer not known

116. Match the correct burning behaviour of fibres from the following:
(a) Silk 1. Fresh celery burning vegetation odour
(b) Cotton 2. Burning human hair odour
(c) Nylon 3. Sweat aromatic odour
(d) Polyester 4. Burning paper odour

(a) (b) (c) (d)

(A) 4 2 3 1

I
J;i!f( 2 4 1 3
, I·
(C) 2 4 3 1
(D) 2 3 1 4
(E) Answer not known

33 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
117. Identify the fibre gives higher volume of swelling%.
(A) Cotton
/Jl1f
Viscose
(C) Wool
(D) Silk
(E) Answer not known

118. Glass fibre is a

(A) Animal fibre
(B) Plant fibre
Jll'f'
Inorganic fibre
(D) Organic fibre
(E) Answer not known

119. Among the following, identify the Mineral fibre

(A) Cotton
(B) Coir
Jll'( Graphite
(D) Rayon
(E) Answer not known

120. Fibre length influences the yarn

;,,t{ · Spinning limit
(B) Dyeability
(C) Neps
(D) Imperfections
(E) Answer not known

Handloom Technology I Textile 34

Technology I Textile Manufacture
121. The silver fed to a spinning machine has a CV of 8.5%. The CV of the ·
yarn is 22%. How much variation has the spinning machine added?
(A) 18.3 (B) 17.3
V'f 20.3 (D) 22.3
(E) Answer not known

122. The dimensions of a bale of cotton is 0.433 volume in ms. On the mill
weighing machine, its mass, including the wrapping and metal bands, is
235 kg. Make a rough estimate of the bale density in kg/m'
(A) 102 kg/ms (B) 142 kg/ms
j,lilf 542 kg/m" (D) 235 kg/ms
(E) Answer not known

123. The amount of draft in the front zone of a ring spinning 3 over 3 apron
drafting unit is
(A) 10-20 (B) 21-30
~ 31-40 (D) 41-50
(E) Answer not known

124. Too high opening willet in OE spinning result in

(A) Low production
(B) High production
Jli!!f"
Decrease in yarn strength
(D) Increase in yarn strength
(E) Answer not known

35 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
125. The term "Back-doubling" is associated with
(A) Draw frame (B) Roving frame
( C) Ring frame ~Rotor spinning
(E) Answer not known

126. Find the incorrect statement

(A) Ring spun yarn is well parallel than rotor spun yarn
(B) · Ring spun yarn is softer than rotor spun yarn
{,Fil/'
Ring spun yarn is low hairy than rotor spun yarn
(D) Ring spun yarn is Jess stiffness than rotor spun yarn.
(E) Answer not known

127. The type of ring and traveller will works at higher spinning speeds is
(A) Low crown ring and C type traveller
Jliff"
Anti wedge ring and C type traveller
(C) SU ring and SU traveller
(D) Ear shaped ring and ear shaped traveller
(E) Answer not known

128. Drafting waves are due to

(A) Sliver levelness ¢( Short fibres
( C) Drafting force (D) Draft direction
(E) Answer not known

Handloom Technology I Textile 36

Technology I Textile Manufacture
129. In the ring size, the flange width for flange number 2 is
(A) 2.5 mm (B) 3.2 mm
(C) 3.7 mm g,,f 4.1 mm
(E) Answer not known

130. The shore hardness value of the soft top roller cot is in the range of
(A) 55° - 60° ~ 65° - 75°
(C) 75° - 85° (D) 85° and above
(E) Answer not known

131. The definition of "actual draft" introduced in drafting process is

(A) Length delivered per unit time
Length fed per unit time
(J1f Mass per uni~ length_ fed
Mass per unit length delivered
(C) Total draft
back zone draft
(D) Output speed
Input speed
(E) Answer not known

132. Top comb is active when

(A) Nipper moves forward
f}lf Combed material delivers
(C) Circular comb in action
(D) Detaching roller is in-active
(E) Answer not known

37 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
133. Find the incorrect statement
(A) Licker-in runs at 800 rpm
g;,t'
Cylinder runs at 100 rpm
(C) Flats runs at 101.6 mm/min
(D) Doffer runs at 15.40 rpm
(E) Answer not known

134. Calculate the actual draft of a carding machine, if the waste%= 5% and
the mechanical draft is= 83.
¢'. 87.5 (B) 77.5
(C) 67.5 (D) 57.5
(E) Answer not known

135. The blending of roving in staple yarn manufacturing is carried out in

(A) Prior to impurity level
(B) During opening and cleaning
(C) At the draw frame
¢{' Ring frame
(E) Answer not known

136. Removal of leading hook is carried out in

(A) Drawing process (B) Carding process
lfi!Jf' Combing process (D) Winding process
(E) Answer not known

Handloom Technology I Textile 38

Technology I Textile Manufacture
137. Opening of individual fibres is carried at
(A) Blow room ~Carding
(C) Drawing (D) Spinning
(E) Answer not known

138. Over all degree of cleaning achieved by the blow room and card is in the
range of
(A) 5-10% (B) 50- 60%
(C) 70- 75% ¢95~99%
(E) Answer not known

139. Cohesion of fibres can be represented by;

Where µ = fibre/fibre coefficient of friction
Ny= Number of fibres in yarn cross section
P = a yarn structure factor
(A) Cohesion= LrxP/ µxNY
(B) Cohesion= µxLr!NYxP
(C) Cohesion= µxNY I Lr xP
Vlf'f' Cohesion= µxNYxL,xP
(E) Answer not known

140. Intensity of opening by the beater is not influenced by

(A) Production rate
(B) Beater speed
(C) Number of blades/strikers
Jli!f!' Fibre type
(E) Answer not known

39 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
141. Two cotton yarns of 408 and 648 are folded, find the resultant count.
¢" 24.6 (B) 34.6
(C) 20.6 (D) 43.6
(E) Answer not known

142. Calculate the count of the threefold cotton yarn composed of 208, 158 and
128 singles.
v(. 58 cotton (B) 68 cotton
( C) 108 cotton (D) 208 cotton
(E)· Answer not known

143. Two polyester filament yarns of 40 and 80 Denier are plied together, find
the resultant count.
(A) 27 (B) 60
(C) 2/60 v,'(120
(E) Answer not known

144. What is the count of silk yarn in Denier metric system if its equivalent
count is 608 NE.
(A) 14.75 Denier (B) 20.80 Denier
Jil'{' 88.58 Denier (D) 120.75 Denier
(E) Answer not known

Handloom Technology I Textile 40

Technology I Textile Manufacture
145. Conversion factor for Tex to Denier is

r/ Tex= Denier x 0.1111 (B)

T Denier
ex= 0.1111

(C) Tex= 590.5 (D) Tex = Denier x 9

Denier
(E) Answer not known

146. A 30 tex yarn requires a gap setting of 0.3 mm, determine the setting for
a 20 tex yarn.
(A) 1.25 mm (B) 2.5 mm
(C) 25 mm Jlllf 0.25 mm
(E) Answer not known

147. Calculate the Denier count of Nylon yarn if the length of yarn is
540 meters and its weight is 12 grams
fll{ 200 (B) 150
(C) 220 (D) 180
(E) Answer not known

148. Denier is defined as the

JI!{'
Weight of yarn in grams present in 9000 metre (or) 9 km length
(B) Weight of yarn in grams present in 8000 metre (or) 8 km length
(C) Weight of yarn in grams present in 7000 metre (or) 7 km length
(D) Weight of yarn in grams present in 6000 metre (or) 6 km length
(E) Answer not known

41 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
149. 1000/Nm is equal to
1 Tex (B) 1 Denier
~
(C) 10 Tex (D) 10 Denier
(E) Answer not known

150. Worsted system is equal to

¢"' 885.8/Tex (B) 7. 972/Tex
(C) 17440/D (D) 1654/Tex
(E) Answer not known

151. In Indirect system

jiff' higher the count, finer is the yarn
(B) higher the count, coarser is the yarn
(C) lower the count, finer is the yarn
. (D) higher or lower the count, coarser is the yarn
(E) Answer not known

152. The actual production of a modern slasher is 42000 metres per day of 8
hours. If the slasher runs with a speed of 125 metres per minute,
calculate the efficiency
vtf" 70% (B) 74%
(C) 75% (D) 86%
(E) Answer not known

Handloom Technology I Textile 42

Technology I Textile Manufacture
153. Calculate the production per hour of a loom running at 200 picks per
minute. The number of picks per meter inserted on the cloth is 2000
vt{ 6m (B) 10 m
(C) 60 m (D) 100 m
(E) Answer not known

154. Calculate the actual production of a shuttless loom per shift of 7:5 hours
running at speed of 650 picks per minute at an efficiency of 92%. If the
picks per dm is 300.
(A) 85. 7 meters (B) 86. 7 meters
v,f' · 89. 7 meters (D) 91. 7 meters
(E) Answer not known

155. The length of 40s yarn in 2 kg of cone is

(A) 1256 yds (B) 2126 yds
jjl'!" 1482 yds (D) 768 metres
(E) Answer not known

156. The rate of winding of a superspeed automatic pirn winding machine is

880 yards per min. Calculate the actual production per day of 8 hours, if
the efficiency is 86% and the count of yarn wound is 20s cotton
(A) 3,62,200 yards (B) 3,63,100 yards
(C) 3,63,178 yards ¢{ 3,63,264 yards
(E) Answer not known

43 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
157. Write the formula for cleaning efficiency of card, where Tr= Trash in feed
and Ta = Trash in delivery
JI!( [Tr -Td] +Tr
(B) [Td - Tr] + Tr
(C) [Tr -Td] + Td
(D) [Td -Tr]+ T<l
(E) Answer not known

158. How many hanks are contained in 5 bundles of 805 cotton yarn?
.(1 bundle= 4.5 kg)
(A) 3900 (B) 3950
V!1'f' 4000 (D) 4010
(E) Answer not known

159. Actual draft is equal to

(A) [100 - waste%] + [Total draft x 100]
(B) [Total draft - waste%]
Jii!!'
[Total draft x 100] + [100 - waste %]
(D) [Total draft - waste%] x 100
(E) Answer not known

160. In a scutcher, the material fed at the feed roller is having the hank of
0.00138 and the hank delivered is 0.00136. Find the mechanical draft.
¢ 0.985 (B) 0.970
(C) 0.960 (D) 1.015
(E) Answer not known

Handloom Technology I Textile 44

Technology I Textile Manufacture
161. The Weft Insertion Rate in meters per minute of a Loom is calculated by
(A) Picks per minute x reed width in meters x number of phases
(B) Number of phases x picks per minute x reed width in meters
Jl!!f"
Reed width in meters x picks per minute x number of phases
(D) Width of the reed in cm x picks per minute x number of phases
(E) Answer not known

162. Find incorrect statement :

High sley eccentricity ratio will
(A). facilitate the passage of shuttle.
(B) increases the effectiveness of beat-up
(C) demand more robust loom parts
fl'J'f" increases the effectiveness of shedding
(E) Answer not known

163. In modern looms, the loom speed is expressed by

(A) PPM (B) PPI
Jjl'f' WIR (D) EPI
(E) Answer not known

164. Which of the following statement is not correct?

¢" Vat dye is soluble in water
(B) Disperse dye is non-ionic in nature
(C) Reactive dye is soluble in water
(D) Direct dye is soluble in water
(E) Answer not known

45 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
165. Maximum Range of Heald Shaft used to control the dobby shedding
(A) 12 (B) 18
~ 24 (D) 36
(E) Answer not known

166. In weaving, other name of 'Front rest' is

!,JI!' Brest beam (B) Back beam
(C) Cloth beam (D) Warp beam
(E) Answer not known

167. The name of the defect which is formed in a fabric due to 'Jack Missing'
in the dobby mechanism is
(A) Bad Selvedges (B) Gout
JPf' Stitching (D) Wrong ends
(E) Answer not known

168. Picking CAMS must be set at---- to one another.

(A) 90° ¢{ 180°
(C) 270° (D) 360°
(E) Answer not known

169. Among the following motion, which is used to separate the warp
threads?
(A) Beat-up (B) Picking
(C) Let-off ¢!' Shedding
(E) Answer not known

Handloom Technology I Textile 46

Technology I Textile. Manufacture
170. In a Loom Timing diagram 0° (or) 360° stands for
(A) Front Centre (B) Back Centre
~ Top Centre (D) Bottom Centre
(E) Answer not known

171. mechanism is not coming under the Auxiliary motion in the

Loom.
JI!{ Let off motion (B) Warp stop motion
(C) Weft stop motion (D) Warp protector motion
(E) Answer not known

1 72. In tappet shedding, the limit of weave repeat is up to

(A) 2 (B) 4
¢' 8 (D) 6
(E) · Answer not known

173. The function of the starch in the Sizing Paste is

Ji({ Adhesives (B) Antiseptics
(C) Hygroscopic (D) Softeners
(E) Answer not known

174. Sizing process is a

J,JI!' Coating of a starch-based adhesive
(B) Coating of binders
(C) Coating of gum
(D) Coating of resin
(E) Answer not known

47 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
 175. The Pirn is the
jiff'
Yarn package that is fitted into a shuttle
(B) Cone package that is fitted in the creel
(C) Cheese package that is fitted in the creel
(D) Ring Cop
(E) Answer not known

176. Single end winders which produce packages such as

v,t( Cheeses or cones (B) Pirn
( C) Warpers beam (D) Weavers beam
(E) Answer not known

177. In warp sheet preparation, Electronic sensing devices are attached in

modern creels to
(A) Confirm the yarn count (B) Confirm the size pickup
if/!f' Ensure the tension (D) Ensure the colour
(E) Answer not known

178. Which one of the piecing system is recommended for Automatic cotton
yarn winding machines
(A) Rigger
Jll!ff Splicers
(C) Pinner
(D) Knotter
(E) Answer not known

Handloom Technology I Textile 48

Technology I Textile Manufacture
1 79. Random winding is
1,1!(
Suitable for most staple spun yarns
(B) Suitable for continuous filament
(C) Suitable for delicate spun yarn
(D) Suitable for continuous and delicate spun yarn
(E) Answer not known

180. The polymeric film forming agent is applied to the warp yarn by the
process called
(A) Singeing {I!( Sizing
(C) Precision winding (D) Sectional warping
(E) Answer not known

181. The "Shot" effect can be produced in threads with-----

jJI/'
The warp in one colour and the weft in another colour
(B) The warp in different colours and the weft in one colour
(C) The warp in one colour and the weft in different colours
(D) Both the warp and the weft in different colours
(E) Answer not known

182. The fabric with a leno and plain weave stripe fabric is termed as
jiff Russian cords (B) Simple net lenos
(C) Jacquardlenos (D) Madras Gauze
(E) Answer not known

49 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
183. Name the type of velveteen fabric which is also known as "Fustian"
fabric
¢' Corded velveteen (B) Plain velveteen
(C) Weft plushes (D) Figured velveteen
(E) Answer not known

184. Identify the incorrect statement regarding to Extra warp figuring.

(A) By introduction of a separate set of warp threads in addition to the
ground warp threads
(B) By introduction of separate set of weft threads in addition to the
ground weft threads
(C) By introduction of both separate warp and weft threads in addition
to the ground warp and weft threads
By introduction of group of warp threads in addition to the ground
warp threads
(E) Answer not known

185. Among the following weaves, which is used to produce longitudinal warp
lines in the cloth with fine sunken lines in between
JI!{" Bed ford cord (B) Honey comb
(C) Huck-a-back (D) Welt
(E) Answer not known

Handloom Technology I Textile 50

Technology I Textile Manufacture
186. Identify the incorrect statement with respect to the characteristics of
bright on honey comb weave?
(A) Constructed on straight drafts only
¢f' Repeat size is a multiple of 6
(C) A single diagonal line crosses a double diagonal line
(D) Non-reversible cloths in which face appears different from back
side of the cloth
(E) Answer not known

187. The weave which form diagonal lines from one selvedge to another is
(A) Crepe (B) Plain
(C) Satin ~Twill
(E) Answer not known

188. The Repeat is . divided into four equal parts. Two parts are diagonally
filled with motif and another two parts (diagonal) are filled with plain
weave is called as
(A) Matt weave (B) Honey comb
jjlf' Huck-a-back (D) Mock leno
(E) Answer not known

189. Identify the correct statement in related to twill weave

(A) All warp face twills are called diagonals
(B) All weft face twills are called diagonals
(C) Small twills are called diagonals
IJilf' Large twills are called diagonals
(E) Answer not known

51 Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
190. Among the following weaves, which is unbalanced Twill weave.
2 3
(A) Twill (B) Twill
2 3
2 4
Twill (D) Twill
3 4
(E) Answer not known

191. Match the following Twill weaves

2
(a) Warp faced 1. . Twill
2
. 2
(b) Weft faced 2. Twill
3
2
(c) Balanced 3. Twill
1
(d) Unbalanced 4. _!_ Twill
2

(a) (b) (c) (d)

vtf's 4 1 2
(B) 3 1 4 2
(C) 2 1 4 3
(D) 1 2 3 4
(E) Answer not known

192. The purpose of using the wadding threads in welt structure is

Jiff To make the cloth Heavier
(B) To make the cloth softer
( C) To make the cloth Harder
(D) To reduce the weight of cloth
(E) Answer not known

Handloom Technology I Textile 52

Technology I Textile Manufacture
193. As per the principle of fabric structure which one of the following fabrics
will have more ends per unit length essentially than picks per unit
length.
Jlf{ Satin (B) Sateen
(C) Equal face twill (D) Diamond
(E) Answer not known

194. Threads used for increasing fabric weight and hidden inside the fabrics
are
riff Wadding threads (B) Cutting ends
(C) Stitching threads (D) Face threads
(E) Answer not known

195. The plain weave has the following characteristics

(A) The Thread density is not Limited
(B) It is a weaker fabric
Jlil!f It has maximum number of binding points
(D) Cloth thickness and mass/unit area are not Limited
(E) Answer not known

196. Double cloths are constructed by

(A) Three series of weft and Two series of warp
(B) One series of weft and Two series of warp
Jll!f'
Two series of warp and Two series of weft
(D) One series of warp and One series of weft
(E) Answer not known

53 . Handloom Technology I Textile

Technology I Textile Manufacture
[Turn over
197. The twill weave popularly known as "Gabardine" weave is
4
(A) Twill (B) ~ Twill
4 4
3
(C) Twill ~!Twill
3
(E) Answer not known

198. Identify the incorrect statement with respect to basic elements in a

woven design
(A) Design
(B) Draft or drawing plan
(C) Peg or lifting plan
Jl!!'r
Interlacement of yarns to weave the fabric
(E) Answer not known

199. Identify the incorrect statement in related to draft

(A) Wavy twill across the twill - pointed draft
(B) Wavy twill along the cloths - straight draft
(C) Diaper design - Herringbone draft
Jli!I'{ Honey comb design - straight draft
(E) Answer not known

200. The drafting system which is used for weaving heavy warp thread
density fabrics is
(A) Broken (B) Pointed
(C) Skip ~Straight
(E) Answer not known

Handloom Technology I Textile 54

Technology I Textile Manufacture