Scribd
Upload
38 views1 page

ISO 45001 - 대산 - 공통 - 공통 - EN - 201218

LG Chemical Ltd. Daesan Plant has been certified for its Occupational Health and Safety Management System in accordance with ISO 45001:2018. The certificate, issued on 18 December 2020, is valid until 03 June 2022 and covers the manufacture of various monomer, polymer, and synthetic rubber products. The certification was conducted by DNV GL – Business Assurance, accredited by the Korea Accreditation Board.

Uploaded by

Qc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views1 page

ISO 45001 - 대산 - 공통 - 공통 - EN - 201218

LG Chemical Ltd. Daesan Plant has been certified for its Occupational Health and Safety Management System in accordance with ISO 45001:2018. The certificate, issued on 18 December 2020, is valid until 03 June 2022 and covers the manufacture of various monomer, polymer, and synthetic rubber products. The certification was conducted by DNV GL – Business Assurance, accredited by the Korea Accreditation Board.

Uploaded by

Qc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MANAGEMENT SYSTEM

CERTIFICATE
Certificate No: OHSAS 18001 Initial certification date: Valid:
10000403549-MSC-KAB-KOR 04 June 2010 17 December 2020 - 03 June 2022

This is to certify that the management system of

LG Chemical Ltd. Daesan Plant


54, Dokgot 1-ro, Daesan-eup, Seosan-si, Chungcheongnam-do, 31901, Korea

has been found to conform to the Occupational Health and Safety Management
System standard:
ISO 45001:2018

This certificate is valid for the following scope:


Manufacture of Monomer Products including Ethylene, Propylene,
Benzene, Toluene, Mixed Xylene, Butadiene, Styrene Monomer, Ethylene
Glycol, Methyl Tertiary Butyl Ether, Butene-1, Vinyl Chloride Monomer,
Phenol, Acetone, α-Methyl Styrene and Bisphenol-A. Manufacture of
Polymer Products including Low Density Polyethylene, Ethylene Vinyl
Acetate, PE Compound, Linear Low Density Polyethlene, Polyolefin
Elastomer, High Density Polyethylene, Polyethylene Raised Temperature,
Polypropylene and Polyvinyl Chloride. Manufacture of Synthetic Rubber
Products including Butadiene Rubber, Acrylonitrile Butadiene Rubber,
Styrene Butadiene Rubber and Solution Styrene Butadiene Rubber.

Place and date: For the issuing office:


Seoul, 18 December 2020 DNV GL – Business Assurance
18F, Kyobo Bldg., 1, Jong-ro, Jongno-gu,
Seoul, Korea

Jang-Sup Lee
Management Representative

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
DNV GL Business Assurance Korea Ltd is accredited by Korea Accreditation Board (KAB) as an Occupational Health and Safety Management System certification
body (Accreditation number: KAB-OC-27).
ACCREDITED UNIT: DNV GL Business Assurance Korea Ltd, 18F Kyobo Bldg., 1 Jong-ro, Jongno-gu, Seoul, Republic of Korea. TEL:+82 2 723 7593.
dnvgl.kr/assurance

You might also like