Scribd
Upload
155 views1 page

TDS BB120 Eng 220216

BB120 is a pharmaceutical grade polyethylene material suitable for pharmaceutical bottles, shrink film, and industrial packaging. It contains additives to prevent slipping and antiblocking. Key properties include a melt flow index of 0.3 g/10min, density of 0.925 g/cm3, tensile strength of 270 kgf/cm2 MD and 220 kgf/cm2 TD, elongation of 550% MD and 650% TD, dart impact strength of 220 g, and haze of 9% for a 50μm film. Its melting temperature is 114°C and Vicat softening temperature is 102°C. The provided data are typical values for film specimens and not guaranteed specifications.

Uploaded by

Qc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
155 views1 page

TDS BB120 Eng 220216

BB120 is a pharmaceutical grade polyethylene material suitable for pharmaceutical bottles, shrink film, and industrial packaging. It contains additives to prevent slipping and antiblocking. Key properties include a melt flow index of 0.3 g/10min, density of 0.925 g/cm3, tensile strength of 270 kgf/cm2 MD and 220 kgf/cm2 TD, elongation of 550% MD and 650% TD, dart impact strength of 220 g, and haze of 9% for a 50μm film. Its melting temperature is 114°C and Vicat softening temperature is 102°C. The provided data are typical values for film specimens and not guaranteed specifications.

Uploaded by

Qc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BB120

Description
Application : Pharmaceutical bottle, Shrinkage film and Industrial packaging
Additives : Non-Slip & Non-Antiblock agent

Application
Pharmaceutical bottle

Properties Method Condition Unit BB120


Physical
MFI ASTM D1238 190℃, 2.16kg load g/10min 0.3
Density ASTM D1505 Density-Gradient g/cm³ 0.925
Film Properties
Tensile Strength at Break Point, MD ASTM D882 500㎜/min kgf/cm² 270
Tensile Strength at Break Point, TD ASTM D882 500㎜/min kgf/cm² 220
Elongation at Break Point, MD ASTM D882 500㎜/min % 550
Elongation at Break Point, TD ASTM D882 500㎜/min % 650
Dart Impact Strength ASTM D1709 Method A g 220
Haze(50㎛) ASTM D1003 50㎛ % 9
Thermal
Melting Temperature LG Method by DSC ℃ 114
Vicat Softening Temperature ASTM D1525 A50 ℃ 102

Note
The properties data in this table are typical values, and not guaranteed specification.
Typical resin property values are measured on film specimens.

Issued Date : 2022-02-16


The information contained herein, including, but not limited to, data, statements and typical values, are given in good faith. LG Chem makes no warranty or guarantee, expressed or implied, (i) that the
result described herein will be obtained under end - use conditions, or (ii) as to the effectiveness or safety of any design incorporating LG Chem materials, products, recommendations or advice.
Further, any information contained herein shall not be construed as a part of legally binding offer. Especially, the typical values should be regarded as reference values only and not as binding
minimum values. Each user bear full responsibility for making its own determination as to the suitability of LG Chem's materials, products, recommendations, or advice for its own particular use. Each
user must identify and perform all tests and analyses necessary to assure that its finished parts incorporating LG Chem material or products will be safe and suitable for use under end - use
conditions. The data contained herein can be changed without notice as a result of the quality improvement of the products.

You might also like