WHEEL LOADER | 457

Gross engine power: 282 hp (210 kW) Operating weight: 44,090 lb (19,999 kg) Full turn tipping load: 29,696 lb (13,470 kg)
Standard shovel capacity: 4.6 yd3 (3.5m3)
FULLY
LOADED
The new Cummins powered JCB 457 wheel loaders
are fully loaded with new and innovative features.

Unique 5-speed gearbox as standard with optional torque

converter lock-up and one of the most comfortable and
operator friendly cabs on the market with 2 new power
modes for greater versatility.

With 50 years of proven wheel loader production, we’re

confident you’ll be fully impressed with our latest model.
FULLY TESTED.

THE NEW JCB 457 HAS BEEN BUILT USING ONLY THE MOST
ADVANCED PRODUCTION TECHNIQUES AND PREMIUM
COMPONENTS FOR SUPERIOR STRUCTURAL STRENGTH. IT’S
BEEN TESTED TO THE LIMIT ON SITES ALL OVER THE WORLD
TO MAKE SURE THAT, WHEREVER YOU’RE OPERATING,
YOU’LL MAINTAIN TOTAL PRODUCTIVITY AT ALL TIMES.

Designed to work harder.

1 Your new JCB 457 will have benefitted from
finite element analysis and rig testing of up to 1 million
cycles, to ensure superior structural strength and
durability. For further peace of mind, cold cell testing
guarantees starting performance down to -4°F.

2 High tolerances and accurate location of pins

and bushes are guaranteed with JCB’s precision

machining techniques.

3 You can specify a 457 for heavy-duty applications

like waste or corrosive material handling.

4 State-of-the-art manufacturing processes like

robot machining, precision paint technology and
innovative assembly techniques help achieve the
very highest levels of build quality. 1 3 4

4 457 WHEEL LOADER

 FULLY TESTED
The 457’s articulation joint has a heavy-duty
box section that’s much stronger than a
single plate with a boss. Its steering rams
are positioned high up and well protected
from possible impact and site damage.

Designed to last.
5 A solid cast rear counterweight protects the rear
of your 457, including the rear lights and cooling
pack, from damage.
8
6 Hoses are neatly routed and clamped through
the articulation joint, well away from any pinch points.

7 The articulation joint has a heavy-duty centre

pin and oversized bush, as well as twin taper roller

bearings on the bottom box joints. This enables it
to tolerate both vertical and horizontal loadings for
greater durability and rigidity.

8 New rear grille, cooling pack sealing and

mudguard fitment for greater overall quality.

5 6 7

457 WHEEL LOADER 5

FULLY PRODUCTIVE.

TIME IS OF THE ESSENCE ON ANY WORKSITE SO THE NEW

JCB 457 IS DESIGNED TO PROVIDE THE FASTEST CYCLE TIMES
IN THE BUSINESS. POWERFUL TWIN HYDRAULIC PUMPS, A
LOAD SENSING VALVE BLOCK AND 5-SPEED TRANSMISSION
AS STANDARD WITH OPTIONAL TORQUE LOCK-UP, PROVIDE
SPEED, ACCURACY AND PRODUCTIVITY IN ABUNDANCE.
2

Powering it all.
1 The Cummins B6.7-liter engine fitted to the new
COMMANDPLUS controls.
A choice of 3 or 4-spool hydraulics gives you
JCB 457 produces impressive performance with a the scope for invaluable extra versatility.
substantial 210kW (282hp) of power; up 9% on our Flow can be adjusted from the cab via the
previous model, and 1350Nm of torque; up 17.4%. all-new CommandPlus controls.

What’s more, it produces all of this at low revs for an

1 4
incredibly responsive operating experience.

A variable geometry turbocharger provides

increased performance at low engine speed for
improved cycle times and tractive effort.

Loading productivity.
2 Powerful twin variable displacement piston pump
hydraulics can circulate a massive 306 l/min for fast
cycle times and excellent multifunctional capability.
Z bar (ZX) HT Standard Lift HT High Lift HT Super High Lift
3 Choose the optional JCB Quickhitch and you’ll
find attachment changing is quick and efficient. 3 4

6 457 WHEEL LOADER

 The innovative electronic management FULLY PRODUCTIVE
system can perform progressive clutch cut-off
for efficient, productive loader control.
This feature governs tractive effort via the
transmission, diverting maximum power to
the loader hydraulics while reducing service
brake wear and fuel consumption.

4 Specify your perfect loader arm: Z-bar linkage

(ZX) for high breakout applications or high torque

(HT) for parallel lifting and multi-attachment work.
High lift or Super high lift option equips your 457
for applications involving high loading heights, such
as hopper and lorry loading.

5 With maximum breakout forces of 176kN, this

7
wheel loader has the power to carry out extremely
arduous loading jobs.

Drivetrain productivity.
6 A unique 5-speed transmission is fitted as
standard making operation even more slick, with
closer gear ratios for improved acceleration, hill
climbing and roading performance. An optional
5-speed transmission with torque convertor lock-up
to eliminate losses, provides even faster cycle times
6
and improved efficiency.

7 Tailor a 457 to any application with a range of

axle options:
› A limited slip differential is perfect for soft, muddy
terrain with reduced traction.
› Open differentials are ideal for hard standing
ground conditions.
› Open differentials with an automatic locking
front diff provide excellent traction in varied
ground conditions. 5 7

457 WHEEL LOADER 7

FULLY POWERED.
Automatic idle returns the engine to
700rpm after 30 seconds of inactivity.

POWER WITHOUT COMPROMISE HAS LONG BEEN THE ROLE

OF ANY LARGE WHEEL LOADER AND THE NEW JCB 457
TAKES THIS ETHOS TO ANOTHER LEVEL. ITS CUTTING-EDGE
CUMMINS ENGINE BOASTS POWER APLENTY, WHILE THE
EFFICIENT, SMOOTH ZF DRIVELINE AND LOW FUEL
CONSUMPTION HELP MAKE YOUR DECISION TO BUY JCB
EVEN EASIER. 1

Driving efficiency. 3

1 The new JCB 457’s Cummins engine offers you

plenty of low-end torque and maintains

it over a wide engine speed range.

2 A hydraulic cooling fan automatically reacts to

ambient temperature and adjusts the 457’s fan
speed to optimise cooling and reduce fuel
consumption. This also lowers noise on your site.

3 Opt for the torque lock up 5-speed transmission

and you’ll get 100% efficiency in second to fifth

gears for improved fuel economy.

4 Two new power modes at the flick of a switch.

Comfort Mode reduces engine power by 20% for
light duty work to 224hp, helping to conserve fuel.
Dynamic Mode increases power to a maximum
282hp for greater output. 4 4

8 457 WHEEL LOADER

 FULLY POWERED

JCB’s innovative variable displacement

pumps feed a load-sensing valve block
which only consumes power on demand,
A new auto engine shutdown feature saves fuel by providing precise, efficient loader control.
switching off the engine when the machine is left
idling. Idle time can be set by the operator from the
cab seat.

5 Wheel speed braking means the brakes on the

new 457 rotate at the same speed as the wheels, for
heat and drag reduction plus improved fuel economy.

6 Unloaded spool valves in the valve block allow the COMMANDPLUS controls.
arms to lower under gravitation rather than hydraulic JCB Smoothride load suspension limits
shock loadings and therefore reduces
force; this reduces fuel consumption further still. 5
material spillage and structural stress,
as well as increasing operator comfort.
7 A choice of 3 or 4-spool hydraulics gives you the The speed of engagement is adjustable
from within the cab using the latest
scope for invaluable extra versatility. state-of-the-art CommandPlus controls.

8 Selectable loader arm detents let operators

control loader arm height limitations, return to dig
settings and float functions, improving safety and
productivity.

6 7 8

457 WHEEL LOADER 9

FULLY IN COMMAND.

THE JCB COMMANDPLUS CAB IS ONE OF THE BEST CABS

ON THE MARKET, WITH THE LATEST IN ERGONOMIC
DESIGN PROVIDING AN OPTIMAL CONTROL LAYOUT AND
DRIVER POSITION FOR GREATER COMFORT AND VISIBILITY,
ENABLING EVEN GREATER OPERATOR PRODUCTIVITY.

See the difference.

1 The A-pillars are positioned to the same width to

the rear of the cab, providing a larger interior with a

superb panoramic front windscreen. All switches and
auxiliary controls are located on the right-hand A-pillar
for easier access.

2 Using the JCB 457’s simple, dedicated menu

interface is easily done with an intuitive optional

rotary controller.

2 1
3 Controlling the loader is easy as all of the
controls are seat-mounted and even move with the
seat suspension. Simply select the control system
that’s best for your operators; we offer single lever
joystick or multi-lever configurations.

4 There are two full color LCD screens to navigate

your 457’s operating menus, with one doubling as a

monitor for the rear view camera.

For even greater operator comfort, the machine is

equipped with end damped steering for smoother
steering from lock to lock. 3 3 4 4

10 457 WHEEL LOADER

 FULLY IN COMMAND
The noise level in the cab is an incredibly
low 68dB(a): so quiet you can hardly hear
the engine running.

5 To keep the operator environment comfortable

for working at all times, we’ve positively pressurized
the cab to eliminate dust and fumes.

6 After extensive research into operator

ergonomics, we’ve devised the Command Driving

Position, which provides the most optimal control
layout for a multitude of different driver shapes and
sizes. You can also choose from an air suspension
standard seat to a super deluxe half leather seat,
featuring fully adjustable heating and cooling 7

functionality, electrically adjustable lumber support

and adjustable dampers.

7 A set and forget feature makes operator access

even easier by storing your preferred steering wheel

position. It can be instantly returned to, even after
you’ve folded the wheel away.

Specify your 457 with either air conditioning

or automatic climate control to create perfect
working temperatures.
5

With a dedicated media port on board, you can

be assured of superb connectivity for all your
electronic devices.

A sliding window on both sides of the cab allows easy

communication with people outside the machine.

The electronic handbrake offers numerous

advantages: it’s quick and easy to operate, and,
because there’s no cable, there are fewer holes in the
cab. This helps to isolate the operator environment
6 6
further.

457 WHEEL LOADER 11

FULLY SERVICEABLE.

MAXIMISING YOUR FLEET’S UPTIME IS OUR NUMBER ONE

PRIORITY AND WE’VE CERTAINLY PULLED OUT ALL THE
STOPS ON THE NEW JCB 457. A ONE-PIECE HOOD, EASY
GROUND LEVEL ACCESS TO KEY COMPONENTS, LIVELINK
TELEMATICS AND WORLD-CLASS AFTERCARE ALL COME
AS STANDARD, WITH TAILORED SERVICE PACKAGES
AVAILABLE TO SUIT.

Routine maintenance.
1 It’s easy to get to the engine on a new JCB 457

with a large single-piece hood..

2 Accessing the diesel and DEF (Diesel Exhaust

2 1
Fluid) tanks is also straightforward, via the lockable
grille at the rear of the machine.

You can check washer fluid level, engine oil and

coolant from inside the cab, with all other routine
checks and grease points located at ground level.
This makes life both easier and safer.

3 The standard widecore cooling package is a

large, single-faced unit so you can be assured of

quick, easy and safe cleaning.

4 Fold down rear access steps provide better

access to service filters and fluid drain points. 3 4

12 457 WHEEL LOADER

 FULLY SERVICEABLE

A large 300-liter fuel tank ensures

maximum working hours between refills.

Less servicing, more service.

6 The CommandPlus cab relays machine condition

with real-time alerts, safeguarding both the machine

and the operator. 8
6
The intuitive CommandPlus help function provides the 9
operator with meaningful descriptions of in-cab switch
functions. Using the “?” button allows new or unfamiliar
operators to quickly and easily understand them
7
without having to refer to the operator’s manual.

7 By using premium components: Cummins

engine, ZF transmissions and axles, Rexroth pumps
and Parker valve block, we’ve built in long service
life as standard.

Full hydraulic dual circuit braking with multiple oil 6

immersed discs gives the braking system a virtually
maintenance-free lifespan.

8 A cyclonic engine fan scavenge filter provides four

times the filtering capacity of a standard air filter. Its

longer life system has fewer components and a higher
level of efficiency, making for better engine protection.

9 Heating and ventilation filters are conveniently

located behind an external access panel. The main

fuse board and relays have been repositioned next
to the door for easy access. 6 6 6

457 WHEEL LOADER 13

FULLY PROTECTED.
COMMANDPLUS controls.
If you’re planning to use your wheel loader
in environments with large amounts of
OPERATORS, BYSTANDERS AND YOUR FLEET ARE WELL airborne debris, opt for the adjustable
reversing fan. The fan can be operated
PROTECTED AT ALL TIMES BY THE NEW JCB 457. GREAT via the CommandPlus controls, and even
swings out for easy cleaning access.

VISIBILITY INSIDE AND OUT, NON-SLIP SURFACES AND

EXCELLENT AIR FILTRATION ARE JUST THE BEGINNING.

Safely does it.

1 If you plan to use your wheeled loader for quarry

work, it’s worth specifying the dedicated quarry

safety pack. This includes blue flashing reverse lights,
a green operator presence beacon, a rear object Visibility over the rear hood is
excellent because the air cleaner
detection system and hi-viz exterior chevrons. is underneath the hood and the
exhaust stack is located centrally.
2 Access steps are inclined and equally spaced,
complemented by well positioned grab handles for
three points of contact at all times. 1

3 On the new JCB 457, you’ll find the rear-view

mirrors mounted in front of the A-pillars for improved

all-around visibility. Interior mirrors, heated exterior
mirrors and hood mirrors all combine to offer
excellent views to every corner of your machine.

4 Our rearward camera displays an unobstructed

view from the back of the machine.

5 Superb visibility in dark conditions is guaranteed

with JCB’s optional LED lighting. 2 3 4 5

14 457 WHEEL LOADER

 FULLY PROTECTED
Roof mounted camera option provides
additional visibility when large capacity
attachments are fitted.

6 The new front fender flaps have been carefully

designed and honed to keep forward spray to a

minimum. This increases safety and decreases debris
build-up.

7 The new 457’s cab is isolator-mounted, compliant

with ROPS/FOPS standards, and positively pressurized 9
against dust. You can choose from fresh air and carbon
recirculation filters as well.

8 Door hinges are mounted on the A-pillar; giving

much better access via a larger and wider door

aperture. It also means you can access the rear of
your loader more safely.

Non-slip walkways and additional grab handle options

allow for safe movement around the machine.

6 7 8

457 WHEEL LOADER 15

 FLEET
The Operator app

LIVELINK TELEMATICS. COMPLETE CONTROL FOR YOUR FLEET. THEY SPOT IT, YOU KNOW IT.
LiveLink telematics helps you monitor and manage your LiveLink Fleet enables you to track every aspect of your The JCB Operator app gives you faster, clearer and more
machine fleet remotely anywhere in the world by radically equipment to maximise efficiency and machine uptime. accurate information about your fleet, direct from the
improving the efficiency, productivity, safety and security people using your equipment each day.
of all your JCB and non JCB machine fleet. GUESS LESS, KNOW MORE: Equipment issues and service
reminders are logged as soon as they occur, helping you to STAY IN TOUCH: Get regular checks on your machine with
MACHINE EFFICIENCY: Keep track of your machine’s daily react quickly. visibility in the LiveLink Fleet portal.
activity with regular performance reports which provide
information about idle time, location, machine health, error codes YOUR EYES ON THE GROUND: Integrate LiveLink Fleet with TAILOR YOUR CHECKS: Customise your checklists to suit any
for diagnostics, engine utilisation by power band, safety alerts, the JCB Operator mobile app and data from your operators’ application, customer or site.
and fuel consumption. JCB LiveLink ensures machines are kept daily equipment checks feed instantly into your dashboard.
UPLOAD TO KEEP UPDATED: Upload useful information with
running for maximum uptime and return on investment.
TOTAL PEACE OF MIND: Operator safety alerts help to ensure photos and comments.
MACHINE RELIABILITY: Accurate hours and service alerts machines are being used efficiently and safely.
improve maintenance planning to optimise machine productivity. FULLY COMPATIBLE: The JCB Operator app works with non
SMARTER TOOLS. SMARTER DECISIONS: From hours worked telemetry related machines and assets.
MACHINE SECURITY: LiveLink’s real time geo-fencing alerts to fuel wastage, access custom analytics on your fleet to make
tell you when machines move out of predetermined zones. ACCESS ALL INFORMATION: Get access to documentation
smarter decisions, quicker.
Curfew alerts inform you of unauthorised usage. such as quick start guides.
EFFORTLESS MEETS PAPERLESS: Access certificates, warranty
Track the location of any asset via Bluetooth information, quick start machine guides and manuals.
connection.
A S S E T TA G

An after market telematics solution which can

LITE
be retrofitted to any machine.
*The individual features of LiveLink Telematics, LiveLink Fleet and Operator App
vary per region, engine and machine type.

16 457 WHEEL LOADER

FULLY SUPPORTED.

JCB’S WORLDWIDE CUSTOMER SUPPORT IS FIRST CLASS.

WHATEVER YOU NEED AND WHEREVER YOU ARE, WE’LL BE
AVAILABLE QUICKLY AND EFFICIENTLY TO HELP MAKE SURE
YOUR MACHINERY IS PERFORMING TO ITS FULL POTENTIAL.

1 2 3

1 Our Technical Support Service provides instant 3 JCB offers comprehensive extended warranties
access to factory expertise, day or night, while our as well as service-only or repair and maintenance
Finance and Insurance teams are always on hand to contracts. Irrespective of what you opt for, our
provide fast, flexible, competitive quotes. Maintenance teams around the world charge
competitive pay rates, and offer non-obligation
2 The global network of JCB Parts Centres is
quotations as well as fast, efficient insurance
another model of efficiency; with 18 regional bases, repair work.
we can deliver around 95% of all parts anywhere in
the world within 24 hours. Our genuine JCB parts
are designed to work in perfect harmony with your
machine for optimum performance and productivity.
Manufacturing Facilities
Dealers
Parts Distribution Centres
Note: JCB LIVELINK and JCB extended warranty packages may not be available in your region, so please check with your local dealer.

457 WHEEL LOADER 17

 SPECIFICATION 457 WHEEL LOADER

STATIC DIMENSIONS TRANSMISSION

5 Speed Non LUC Converter (ZF) 5 Speed LUC Converter (ZF) *Assumes LUC Engaged
G
Type ZF 5WG210 ZF 5WG210 with lock-up
Forward Reverse Forward Reverse Forward Reverse Forward Reverse
Gear Dynamic Dynamic Comfort Comfort Dynamic Dynamic Comfort Comfort
Mode Mode Mode Mode Mode Mode Mode Mode
1 mph (kph) 4 (6.37) 4.2 (6.74) 3.4 (5.44) 3.6 (5.75) 3.7 (6.02) 4 (6.37) 3.4 (5.4) 3.5 (5.7)
J1 2 mph (kph) 7.3 (11.67) 7.6 (12.3) 6.2 (10.02) 6.6 (10.56) 7 (11.29) 7.4 (11.9) 6.3 (10.2) 6.7 (10.75)
J
F
3 mph (kph) 11 (17.77) 17.5 (28.17) 9.5 (15.21) 14.5 (23.36) 10.7 (17.3) 17.5 (28.16) 9.7 (15.62) 15.8 (25.4)
4 mph (kph) 16.7 (26.9) 13.9 (22.37) 16.6 (26.75) 15 (24.13)
5 mph (kph) 24 (38.68) 19.3 (31.09) 25.3 (40.7) 22.6 (36.38)
E

ENGINE
H1 B C D
H
Manufacturer Cummins
A
H Model B Series
Capacity in³ (liters) 409 (6.7)
457 HT 457 HT HL 457 HT SHL 457 ZX
Aspiration Turbo Charged
A Overall length ft-in (mm) 27' 11" (8508) 29' 4" (8950) 31' 0" (9451) 26' 1" (7961) Cylinders 6
B Axle to pivot pin ft-in (mm) 5' 2" (1577) 6' 7" (2018) 8' 11" (2727) 5' 4" (1622) Max gross power to SAE J1995/ISO 14396 kW (hp) @ 1900 rpm 210 (282)
C Wheel base ft-in (mm) 10' 10" (3300) 10' 10" (3300) 10' 10" (3300) 10' 10" (3300) Rated gross power to SAE J1995/ISO 14396 kW (hp) @ 2200 rpm 194 (260)
D Axle to counterweight face ft-in (mm) 6' 6" (1971) 6' 6" (1971) 6' 6" (1971) 6' 6" (1971) Nett power to ISO 9249 kW (hp) @ 2200 rpm 191 (257)
E Minimum ground clearance ft-in (mm) 1' 7" (487) 1' 7" (487) 1' 7" (487) 1' 7" (473) Max torque lb-ft (Nm) @1300 rpm 996 (1350)
F Height over exhaust ft-in (mm) 10' 6" (3197) 10' 6" (3197) 10' 6" (3197) 10' 7" (3224) Valves per cylinder 4
G Width over cab ft-in (mm) 5' 3" (1600) 5' 3" (1600) 5' 3" (1600) 4' 9" (1446) Air cleaner Cyclonic pre filter with engine fan scavenge system

H Max width over tires ft-in (mm) 8' 10" (2698) 8' 10" (2698) 8' 10" (2698) 8' 10" (2699) Fan drive type Hydraulically driven cooling fan
Emissions EU Stage V, US EPA Tier 4F
H1 Wheel track ft-in (mm) 6' 11" (2100) 6' 11" (2100) 6' 11" (2100) 6' 11" (2100)
J Height over cab ft-in (mm) 11' 3" (3427) 11' 3" (3427) 11' 3" (3427) 11' 3" (3423)
Pin height (maximum) ft-in (mm) 14' 2" (4307) 15' 7" (4750) 17' 4" (5273) 13' 6" (4110)
AXLES
Type Open differential Limited slip differential Open differential with auto-locking front
Front axle weight lbs (kg) 18175 (8244) 19522 (8855) 21608 (9801) 19809 (8985)
Make and model ZF MT-L 3095 MK 2 (front and rear) ZF MT-L 3095 MK 2 (front and rear) ZF MT-L 3095 MK 2 (front and rear)
Rear axle weight lbs (kg) 26449 (11997) 25787 (11697) 24559 (11140) 24282 (11014)
Overall axle ratio 23.334:1 23.334:1 23.334:1
Total weight lbs (kg) 44622 (20240) 45309 (20552) 46167 (20941) 44090 (19999)
Rear axle oscillation +/-12.5° +/-12.5° +/-12.5°
Data based on machine equipped with direct mounted 3.5 m3 bucket with toe plate and Michelin 23.5 R25 XHA2 (L3) tires. All available with open differential, limited slip differential, open differential with auto-locking front.
HT machines include Heavy Duty counterweight.

ELECTRICAL SYSTEM
System voltage Amps 24
Alternator output Amps 100
Battery capacity Amp hour 2 x 110

R4
HYDRAULICS
Pump type Variable displacement
Pump 1 maximum flow l/min 153
Pump 1 maximum pressure bar 220
R2
R3 Pump 2 maximum flow l/min 153
Pump 2 maximum pressure bar 170
Hydraulic cycle times at full engine RPM
R1
Arms raise (full bucket) Seconds 5.8
457 HT 457 HT HL 457 HT SHL 457 ZX Shovel dump (full bucket) Seconds 1.2
R1 Maximum turn radius over shovel mm 6527 6822 6933 6507 Arms lower (empty bucket) Seconds 4.1
R2 Maximum turn radius over tire mm 5883 5883 5883 5883 Total cycle Seconds 11.1
R3 Inside turn radius mm 3183 3183 3183 3183
R4 Articulation angle degrees +/-40 +/-40 +/-40 +/-40
 457 WHEEL LOADER SPECIFICATION

TIRE SIZE
457HT std arms Dimensions
N
Tire size Manufacturer Type Rating Op weight kg STL kg FTTL kg Vertical Width

23.5R25 (Radial) Michelin XTLA L2 -12 -8 -6 -2 -3

650/65R25 (Radial) Michelin XLD L3 -92 -58 -49 -56 35
M 23.5R25 (Radial) Goodyear TL-3A+ L3 324 204 174 19 0
23.5R25 (Radial) Goodyear RT-3B L3 176 111 95 10 0
T 23.5-25 (Crossply) Goodyear HRL-3A (20ply) L3 -100 -63 -54 15 0
23.5-25 (Crossply) JCB SITEMASTER (24 Ply) L3 -92 -58 -49 6 1
V Q 23.5R25 (Radial) JCB EARTHMOVER L3 160 101 86 1 6

R 23.5R25 (Radial) Michelin XLDD2A L5 548 344 295 27 13

23.5R25 (Radial) Michelin XMINE D2 L5 828 520 445 37 38
23.5R25 (Radial) Goodyear RL-5K L5 792 498 426 9 24
O
S P 23.5R25 (Solid cushion) SG Revolution S2 C2 DWL - 3124 1964 1680 51 -24
*Heavy duty counterweight replaced by standard counterweight when solid tires are fitted.

LOADER DIMENSIONS
Model 457 HT
Shovel mounting Direct Quickhitch

Shovel equipment Tipped teeth Reversible toeplate Tipped teeth and toeplate segments Tipped teeth Reversible toeplate Tipped teeth and toeplate segments

Shovel capacity
yd³ (m³) 3.1 3.3 3.3 3.5 3.3 3.5 3.1 3.3 3.3 3.5 3.3 3.5
(SAE heaped 100%)
Shovel capacity (struck) yd³ (m³) 2.497 2.687 2.648 2.844 2.648 2.844 2.497 2.687 2.648 2.844 2.648 2.844
Shovel width ft-in (mm) 2837 2837 2800 2800 2837 2837 2837 2837 2800 2800 2837 2837
Shovel weight lbs (kg) 1519 1565 1629 1675 1667 1713 1426 1417 1536 1581 1574 1619
Maximum material density * lbs/yd³ (kg/m³) 2118 1975 1972 1846 1963 1837 1996 1863 1858 1740 1853 1732
Tipping load straight * lbs (kg) 15609 15506 15480 15387 15432 15327 14760 14670 14643 14552 14609 14492
Tipping load full turn * lbs (kg) 13130 13035 13014 12919 12956 12860 12377 12295 12263 12180 12229 12122
Payload * lbs (kg) 6565 6518 6507 6460 6478 6430 6189 6148 6131 6090 6115 6061
Maximum breakout force lbf (kN) 161 153 150 143 150 143 144 138 135 130 135 130
M Dump angle maximum degrees 45 45 45 45 45 45 45 45 45 45 45 45
N Roll back angle full height degrees 57 57 57 57 57 57 57 57 57 57 57 57
O Roll back at carry degrees 52 52 52 52 52 52 52 52 52 52 52 52
P Roll back at ground level degrees 46 46 46 46 46 46 46 46 46 46 46 46
Q Load over height ft-in (mm) 3999 3999 4031 4031 3999 3999 3999 3999 4031 4031 3999 3999

Dump height
R ft-in (mm) 2923 2881 3072 3030 2923 2881 2817 2775 2966 2924 2817 2772
(45 deg dump)
S Dig depth ft-in (mm) 120 120 88 88 120 120 120 120 88 88 120 120

T Reach at dump height ft-in (mm) 1326 1368 1216 1258 1326 1368 1432 1474 1322 1364 1432 1474

V Pin height ft-in (mm) 4307 4307 4307 4307 4307 4307 4307 4307 4307 4307 4307 4307

Reach maximum (45 deg dump) horizontal arm ft-in (mm) 2303 2345 2193 2232 2303 2345 2409 2451 2299 2438 2409 2451

Operating weight lbs (kg) 20050 20096 20146 20192 20194 20240 20337 20382 20433 20478 20461 20526
*Assumes machine is fitted with Michelin 23.5R25 XHA2 (L3) tires.
 SPECIFICATION 457 WHEEL LOADER

TIRE SIZE
457HT HL arms Dimensions
N
Tire size Manufacturer Type Rating Op weight kg STL kg FTTL kg Vertical Width

23.5R25 (Radial) Michelin XTLA L2 -12 -7 -6 -2 -3

650/65R25 (Radial) Michelin XLD L3 -92 -51 -43 -56 35
M 23.5R25 (Radial) Goodyear TL-3A+ L3 324 178 152 19 0
23.5R25 (Radial) Goodyear RT-3B L3 176 97 83 10 0
T 23.5-25 (Crossply) Goodyear HRL-3A (20ply) L3 -100 -55 -47 15 0
23.5-25 (Crossply) JCB SITEMASTER (24 Ply) L3 -92 -51 -43 6 1
V Q 23.5R25 (Radial) JCB EARTHMOVER L3 160 88 75 1 6

R 23.5R25 (Radial) Michelin XLDD2A L5 548 301 257 27 13

23.5R25 (Radial) Michelin XMINE D2 L5 828 455 389 37 38
23.5R25 (Radial) Goodyear RL-5K L5 792 435 372 9 24
O
S P 23.5R25 (Solid cushion) SG Revolution S2 C2 DWL - 3124 1715 1467 51 -24
*Heavy duty counterweight replaced by standard counterweight when solid tires are fitted.

LOADER DIMENSIONS
Model 457HT HL
Shovel mounting Direct Quickhitch

Shovel equipment Tipped teeth Reversible toeplate Tipped teeth and toeplate segments Tipped teeth Reversible toeplate Tipped teeth and toeplate segments

Shovel capacity
yd³ (m³) 3.5 (2.8) 4.1 (3.1) 4.3 (3.3) 4.3 (3.3) 4.6 (3.5) 4.3 (3.3) 4.6 (3.5) 4.1 (3.1) 4.3 (3.3) 4.3 (3.3) 4.6 (3.5) 4.3 (3.3) 3.3 (3.5)
(SAE heaped 100%)
Shovel capacity (struck) yd³ (m³) 2.844 (2.21) 3.3 (2.497) 3.5 (2.687) 3.5 (2.648) 3.7 (2.844) 3.5 (2.648) 3.7 (2.844) 3.3 (2.497) 3.5 (2.687) 3.5 (2.648) 3.7 (2.844) 3.5 (2.648) 2.648 (2.844)
Shovel width ft-in (mm) 9' 4" (2837) 9' 4" (2837) 9' 4" (2837) 9' 2" (2800) 9' 2" (2800) 9' 4" (2837) 9' 4" (2837) 9' 4" (2837) 9' 4" (2837) 9' 2" (2800) 9' 2" (2800) 9' 4" (2837) 9' 4" (2837)
Shovel weight lbs (kg) 3190 (1447) 3349 (1519) 3450 (1565) 3591 (1629) 3693 (1675) 3675 (1667) 3777 (1713) 3144 (1426) 3124 (1417) 3386 (1536) 3486 (1581) 3470 (1574) 3569 (1619)
Maximum material density * lbs/yd³ (kg/m³) 3334 (1978) 3019 (1791) 2815 (1670) 2808 (1666) 2628 (1559) 2793 (1657) 2614 (1551) 2849 (1690) 2658 (1577) 2648 (1571) 2479 (1471) 2640 (1566) 2466 (1463)
Tipping load straight * lbs (kg) 29064 (13183) 29220 (13254) 29024 (13165) 28967 (13139) 28770 (13050) 28839 (13081) 28640 (12991) 27672 (12552) 27500 (12474) 27423 (12439) 27249 (12360) 27348 (12405) 27121 (12302)
Tipping load full turn * lbs (kg) 24418 (11076) 24482 (11105) 24304 (11024) 24238 (10994) 24055 (10911) 24112 (10937) 23929 (10854) 23100 (10478) 22944 (10407) 22855 (10367) 22697 (10295) 22785 (10335) 22571 (10238)
Payload * lbs (kg) 12209 (5538) 12242 (5553) 12152 (5512) 12119 (5497) 12028 (5456) 12055 (5468) 11964 (5427) 11550 (5239) 11471 (5203) 11429 (5184) 11349 (5148) 11391 (5167) 11285 (5119)
Maximum breakout force lbf (kN) 39566 (176) 36644 (163) 34845 (155) 33946 (151) 34621 (154) 33946 (151) 34621 (154) 32822 (146) 31473 (140) 30349 (135) 29000 (129) 30349 (135) 29000 (129)
M Dump angle maximum degrees 45 45 45 45 45 45 45 45 45 45 45 45 45
N Roll back angle full height degrees 56 56 56 56 56 56 56 56 56 56 56 56 56
O Roll back at carry degrees 48 48 48 48 48 48 48 48 48 48 48 48 48
P Roll back at ground level degrees 43 43 43 43 43 43 43 43 43 43 43 43 43
Q Load over height ft-in (mm) 14' 7" (4446) 14' 7" (4443) 14' 7" (4443) 14' 7" (4447) 14' 7" (4447) 14' 5" (4383) 14' 7" (4443) 14' 7" (4443) 14' 7" (4443) 14' 7" (4447) 14' 7" (4447) 14' 7" (4443) 14' 7" (4443)

Dump height
R ft-in (mm) 10' 9" (3264) 10' 11" (3328) 11' 1" (3370) 11' 5" (3476) 11' 3" (3435) 10' 11" (3328) 11' 1" (3370) 10' 7" (3222) 10' 5" (3180) 11' 1" (3371) 10' 11" (3329) 10' 7" (3222) 10' 5" (3180)
(45 deg dump)
S Dig depth ft-in (mm) 0' 5" (120) 0' 5" (120) 0' 5" (120) 0' 5" (120) 0' 5" (120) 0' 6" (152) 0' 6" (152) 0' 5" (120) 0' 5" (120) 0' 5" (120) 0' 5" (120) 0' 6" (152) 0' 6" (152)

T Reach at dump height ft-in (mm) 4' 5" (1350) 4' 3" (1286) 4' 5" (1350) 4' 3" (1286) 4' 1" (1244) 4' 7" (1396) 4' 5" (1354) 4' 3" (1286) 4' 1" (1244) 3' 10" (1180) 3' 9" (1138) 4' 3" (1290) 4' 1" (1248)

V Pin height ft-in (mm) 15' 7" (4750) 15' 7" (4750) 15' 7" (4750) 15' 7" (4750) 15' 7" (4750) 15' 7" (4750) 15' 7" (4750) 15' 7" (4750) 15' 7" (4750) 15' 7" (4750) 15' 7" (4750) 15' 7" (4750) 15' 7" (4750)
Reach maximum (45 deg dump) horizontal
ft-in (mm) 8' 6" (2603) 8' 9" (2667) 8' 11" (2709) 8' 5" (2557) 8' 6" (2599) 8' 9" (2667) 8' 11" (2709) 9' 1" (2773) 9' 3" (2814) 8' 9" (2663) 8' 10" (2705) 9' 1" (2773) 9' 3" (2814)
arm
Operating weight lbs (kg) 44335 (20110) 44891 (20362) 44992 (20408) 45102 (20458) 45204 (20504) 45208 (20506) 45309 (20552) 45523 (20649) 45622 (20694) 45735 (20745) 45834 (20790) 45797 (20773) 45940 (20838)
*Assumes machine is fitted with Michelin 23.5R25 XHA2 (L3) tires.
 457 WHEEL LOADER SPECIFICATION

TIRE SIZE
457HT SHL arms Dimensions
N
Tire size Manufacturer Type Rating Op weight kg STL kg FTTL kg Vertical Width

23.5R25 (Radial) Michelin XTLA L2 -12 -6 -5 -2 -3

650/65R25 (Radial) Michelin XLD L3 -92 -44 -38 -56 35
M 23.5R25 (Radial) Goodyear TL-3A+ L3 324 155 132 19 0
23.5R25 (Radial) Goodyear RT-3B L3 176 84 72 10 0
T 23.5-25 (Crossply) Goodyear HRL-3A (20ply) L3 -100 -48 -41 15 0
23.5-25 (Crossply) JCB SITEMASTER (24 Ply) L3 -92 -44 -38 6 1
V Q 23.5R25 (Radial) JCB EARTHMOVER L3 160 76 65 1 6

R 23.5R25 (Radial) Michelin XLDD2A L5 548 261 224 27 13

23.5R25 (Radial) Michelin XMINE D2 L5 828 395 338 37 38
23.5R25 (Radial) Goodyear RL-5K L5 792 378 323 9 24
O
S P 23.5R25 (Solid cushion) SG Revolution S2 C2 DWL - 3124 1490 1275 51 -24
*Heavy duty counterweight replaced by standard counterweight when solid tires are fitted.

LOADER DIMENSIONS
Model 457 HT SHL
Shovel mounting Direct Quickhitch

Shovel equipment Tipped teeth Reversible toeplate Tipped teeth and toeplate segments Tipped teeth Reversible toeplate Tipped teeth and toeplate segments

Shovel capacity
yd³ (m³) 3.5 (2.8) 4.1 (3.1) 4.3 (3.3) 4.3 (3.3) 4.6 (3.5) 4.3 (3.3) 4.6 (3.5) 4.1 (3.1) 4.3 (3.3) 4.3 (3.3) 4.6 (3.5) 4.3 (3.3) 4.6 (3.5)
(SAE heaped 100%)
Shovel capacity (struck) yd³ (m³) 2.844 (2.21) 3.3 (2.497) 3.5 (2.687) 3.5 (2.648) 3.7 (2.844) 3.5 (2.648) 3.7 (2.844) 3.3 (2.497) 3.5 (2.687) 3.5 (2.648) 3.7 (2.844) 3.3 (2.648) 3.5 (2.844)
Shovel width ft-in (mm) 9' 4" (2837) 9' 4" (2837) 9' 4" (2837) 9' 2" (2800) 9' 2" (2800) 9' 4" (2837) 9' 4" (2837) 9' 4" (2837) 9' 4" (2837) 9' 2" (2800) 9' 2" (2800) 9' 4" (2837) 9' 4" (2837)
Shovel weight lbs (kg) 3190 (1447) 3349 (1519) 3450 (1565) 3591 (1629) 3693 (1675) 3675 (1667) 3777 (1713) 3144 (1426) 3124 (1417) 3386 (1536) 3486 (1581) 3470 (1574) 3569 (1619)
Maximum material density * lbs/yd³ (kg/m³) 2790 (1655) 2474 (1468) 2308 (1369) 2297 (1363) 2149 (1275) 2284 (1355) 2136 (1267) 2333 (1384) 2174 (1290) 2164 (1284) 2024 (1201) 2156 (1279) 2011 (1193)
Tipping load straight * lbs (kg) 24493 (11110) 24143 (10951) 23973 (10874) 23898 (10840) 23726 (10762) 23772 (10783) 23600 (10705) 22862 (10370) 22712 (10302) 22617 (10259) 22467 (10191) 22547 (10227) 22342 (10134)
Tipping load full turn * lbs (kg) 20437 (9270) 20071 (9104) 19912 (9032) 19831 (8995) 19672 (8923) 19709 (8940) 19548 (8867) 18916 (8580) 18777 (8517) 18678 (8472) 18536 (8408) 18607 (8440) 18415 (8353)
Payload * lbs (kg) 10218 (4635) 10035 (4552) 9956 (4516) 9916 (4498) 9835 (4461) 9855 (4470) 9775 (4434) 9458 (4290) 9387 (4258) 9339 (4236) 9268 (4204) 9304 (4220) 9209 (4177)
Maximum breakout force lbf (kN) 39342 (175) 36644 (163) 34845 (155) 34171 (152) 32597 (145) 34171 (152) 32597 (145) 32822 (146) 31473 (140) 30799 (137) 29675 (132) 30799 (137) 29675 (132)
M Dump angle maximum degrees 45 45 45 45 45 45 45 45 45 45 45 45 45
N Roll back angle full height degrees 58 58 58 58 58 58 58 58 58 58 58 58 58
O Roll back at carry degrees 54 54 54 54 54 54 54 54 54 54 54 54 54
P Roll back at ground level degrees 46 46 46 46 46 46 46 46 46 46 46 46 46
Q Load over height ft-in (mm) 16' 3" (4962) 16' 3" (4965) 16' 3" (4965) 16' 5" (4997) 16' 5" (4997) 16' 3" (4965) 16' 3" (4965) 16' 3" (4965) 16' 3" (4965) 16' 5" (4997) 16' 5" (4997) 16' 3" (4965) 16' 3" (4965)

Dump height
R ft-in (mm) 12' 12" (3953) 12' 9" (3889) 12' 7" (3847) 13' 3" (4037) 13' 1" (3996) 12' 9" (3889) 12' 7" (3847) 12' 5" (3783) 12' 3" (3741) 12' 11" (3932) 12' 9" (3890) 12' 5" (3783) 12' 3" (3741)
(45 deg dump)
S Dig depth ft-in (mm) 0' 5" (120) 0' 5" (120) 0' 5" (120) 0' 3" (88) 0' 3" (88) 0' 5" (120) 0' 5" (120) 0' 5" (120) 0' 5" (120) 0' 3" (88) 0' 3" (88) 0' 5" (120) 0' 5" (120)

T Reach at dump height ft-in (mm) 4' 4" (1319) 4' 6" (1383) 4' 8" (1425) 4' 2" (1273) 4' 4" (1315) 4' 6" (1383) 4' 8" (1425) 4' 11" (1489) 5' 0" (1531) 4' 6" (1379) 4' 8" (1421) 4' 11" (1489) 5' 0" (1531)

V Pin height ft-in (mm) 17' 4" (5273) 17' 4" (5273) 17' 4" (5273) 17' 4" (5273) 17' 4" (5273) 17' 4" (5273) 17' 4" (5273) 17' 4" (5273) 17' 4" (5273) 17' 4" (5273) 17' 4" (5273) 17' 4" (5273) 17' 4" (5273)
Reach maximum (45 deg dump) horizontal
ft-in (mm) 9' 12" (3038) 10' 2" (3102) 10' 4" (3144) 9' 10" (2992) 9' 11" (3034) 10' 2" (3102) 10' 4" (3144) 10' 6" (3208) 10' 8" (3249) 10' 2" (3098) 10' 4" (3140) 10' 6" (3208) 10' 8" (3249)
arm
Operating weight lbs (kg) 45193 (20499) 45748 (20751) 45850 (20797) 45960 (20847) 46061 (20893) 46066 (20895) 46167 (20941) 46381 (21038) 46480 (21083) 46592 (21134) 46692 (21179) 46654 (21162) 46798 (21227)
*Assumes machine is fitted with Michelin 23.5R25 XHA2 (L3) tires.
 SPECIFICATION 457 WHEEL LOADER

TIRE SIZE
457ZX std arms Dimensions
Op weight STL FTTL Vertical Width
Tire size Manufacturer Type Rating
N kg kg kg mm mm
23.5R25 (Radial) Michelin XTLA L2 -12 -9 -8 -2 -3
650/65R25 (Radial) Michelin XLD L3 -92 -69 -59 -56 35
23.5R25 (Radial) Goodyear TL-3A+ L3 324 243 208 19 0
M 23.5R25 (Radial) Goodyear RT-3B L3 176 132 113 10 0
23.5-25 (Crossply) Goodyear HRL-3A (20ply) L3 -100 -75 -64 15 0
T
23.5-25 (Crossply) JCB SITEMASTER (24 Ply) L3 -92 -69 -59 6 1
23.5R25 (Radial) JCB EARTHMOVER L3 160 120 103 1 6
V Q 23.5R25 (Radial) Michelin XLDD2A L5 548 412 352 27 13
R 23.5R25 (Radial) Michelin XMINE D2 L5 828 622 532 37 38
23.5R25 (Radial) Goodyear RL-5K L5 792 595 509 9 24
O 23.5R25 (Solid cushion) SG Revolution S2 C2 DWL - 3124 2347 2008 51 -24
S P Heavy Duty Counterweight - 774 1752 1566 51 -24
*Heavy duty counterweight not available with L5 & solid tires

LOADER DIMENSIONS
Model 457 ZX
Shovel mounting Direct Quickhitch
Shovel type General purpose General purpose
Shovel equipment Tipped teeth Reversible toeplate Tipped teeth and toeplate segments Tipped teeth Reversible toeplate Tipped teeth and toeplate segments
Shovel capacity (SAE heaped) yd³ (m³) 3.1 3.3 3.3 3.5 3.3 3.5 3.1 3.3 3.3 3.5 3.3 3.5
Shovel capacity (struck) yd³ (m³) 3 3 3 3 3 3 2 3 3 3 3 3
Shovel width ft-in (mm) 2837 2837 2800 2800 2837 2837 2837 2837 2800 2800 2837 2837
Shovel weight lbs (kg) 1613 1656 1723 1766 1761 1804 1426 1471 1536 1581 1574 1619
Maximum material density * lbs/yd³ (kg/m³) 2217 2068 2064 1933 2055 1924 2122 1984 1975 1854 1970 1845
Tipping load straight * lbs (kg) 16494 16390 16364 16269 16313 16208 15846 15780 15725 15658 15690 15596
Tipping load full turn * lbs (kg) 13743 13648 13626 13530 13566 13470 13156 13094 13037 12975 13002 12915
Payload * lbs (kg) 6872 6824 6813 6765 6783 6735 6578 6547 6519 6488 6501 6457
Maximum breakout force lbf (kN) 172 165 161 154 161 154 153 147 143 137 143 137
M Dump angle maximum degrees 45 45 45 45 45 45 45 45 45 45 45 45
N Roll back angle full height degrees 67 67 67 67 67 67 67 67 67 67 67 67
O Roll back at carry degrees 45 45 45 45 45 45 45 45 45 45 45 45
P Roll back at ground level degrees 39 39 39 39 39 39 39 39 39 39 39 39
Q Load over height ft-in (mm) 3802 3802 3834 3834 3802 3802 3802 3802 3834 3834 3802 3802
R Dump height (45 deg dump) ft-in (mm) 2740 2698 2890 2848 2740 2698 2620 2578 2770 2728 2620 2578
S Dig depth ft-in (mm) 120 120 88 88 120 120 120 120 88 88 120 120
T Reach at dump height ft-in (mm) 1301 1343 1191 1233 1301 1343 1421 1463 1311 1353 1421 1463
V Pin height ft-in (mm) 4110 4110 4110 4110 4110 4110 4110 4110 4110 4110 4110 4110
Reach maximum (45 deg dump) horizontal arm ft-in (mm) 2140 2182 2029 2071 2140 2182 2260 2302 2149 2191 2260 2302
Operating weight lbs (kg) 19811 19854 19907 19950 19956 19999 20170 20215 20266 20311 20295 20360
*Assumes machine is fitted with Michelin 23.5R25 XHA2 (L3) tires.
 457 WHEEL LOADER SPECIFICATION

F NOISE AND VIBRATION

Uncertaincy Measurement conditions.
Determined in accordance with the test method defined in ISO 6396
Noise at the operator station LpA 68 dB +/- 1 dB
and the dynamic test condition defined on 2000/14/EC.
Noise emission from the Guaranteed equivalent sound power (external noise) determined in
LWA 102 dB +/- 1 dB
machine accordance with the dynamic test conditions defined in 2000/14/EC.
+/- 0.36 f/s2 ISO 2631-1:1997 normalised to an 8h reference period and based
Whole body vibration f/s2 (m/s2) 2 (0.63)
(0.11 m/s2) upon a test cycle comprising of loader work (soil).
Hand-arm vibration f/s2 (m/s2) <8.2 (2.5) N/A ISO 5349-2:2001 dynamic test conditions.
E
MATERIAL DENSITY
Material Loose density Fill factor Material Loose density Fill factor
D
lbs/yd³ (kg/m³) % lbs/yd³ (kg/m³) %
Snow (fresh) 337 (200) 110 Sodium chloride (dry) (salt) 2191 (1300) 85
Peat (dry) 674 (400) 100 Cement portland 2427 (1440) 100

A Sugar beet 893 (530) 100 Limestone (crushed) 2579 (1530) 100
C
Coke (loose) 961 (570) 85 Sand (dry) 2613 (1550) 100
B Barley 1011 (600) 85 Asphalt 2697 (1600) 100
Petroleum coke 1146 (680) 85 Gravel (dry) 2781 (1650) 85

LOADER DIMENSIONS WITH FORKS Wheat 1230 (730) 85 Clay (wet) 2832 (1680) 110
457 HT 457 HT HL 457 HT SHL 457 ZX Coal bitumous 1289 (765) 100 Sand (wet) 3186 (1890) 110
Fork carriage width ft-in (mm) 4' 11" (1500) 4' 11" (1500) 4' 11" (1500) 4' 11" (1500) Fertiliser (mixed) 1736 (1030) 85 Fire clay 3506 (2080) 100
Length of tines ft-in (mm) 4' 0" (1220) 4' 0" (1220) 4' 0" (1220) 4' 0" (1220) Coal anthracite 1763 (1046) 100 Copper (concentrate) 3877 (2300) 85
A Reach at ground level ft-in (mm) 3' 11" (1198) 5' 5" (1649) 7' 1" (2158) 3' 3" (1003) Earth (dry) (loose) 1938 (1150) 100 Slate 4720 (2800) 100
B Reach at arms horizontal ft-in (mm) 6' 1" (1847) 7' 3" (2213) 8' 8" (2647) 5' 7" (1697) Nitrate fertiliser 2107 (1250) 85 Magnetite 5401 (3204) 100
C Top of tine above ground with arms down ft-in (mm) 0' 1" (28.5) 0' 1" (28.5) 0' 1" (28.5) 0' 1" (28.5)
BUCKET CAPACITIES
D Arms, horizontal height ft-in (mm) 6' 4" (1935) 6' 4" (1935) 6' 4" (1935) 6' 4" (1935)
E Arms, maximum height ft-in (mm) 13' 7" (4143) 15' 1" (4598) 16' 9" (5109) 16' 9" (5109)
HT
F Reach at maximum height ft-in (mm) 2' 10" (875) 2' 12" (902.5) 3' 1" (933.5) 3' 1" (933.5)
Tipping load straight lbs (kg) 40005 (18146) 29487 (13375) 21266 (9646) 33598 (15240) 3.5 HT HL

Tipping load full turn (40°) lbs (kg) 34163 (15496) 24967 (11325) 17915 (8126) 28270 (12823) HT SHL ZX
Payload* lbs (kg) 17637 (8000) 17637 (8000) 14330 (6500) 17637 (8000)
HT
Attachment weight lbs (kg) 1345 (610) 1345 (610) 1345 (610) 1345 (610)

Bucket capacity (m3)

3.3 HT HL
Operating weight(includes 80Kg operator and full fuel
lbs (kg) 43017 (19512) 43704 (19824) 44562 (20213) 42651 (19346)
and Urea tanks) HT SHL ZX
* At the centre of gravity distance 600mm. Based on 80% of FTTL as defined in IS0 8313.
Manual fork spacing’s at 50mm increments. Class 4A forks (section 150mm x 60mm). HT machines have parallel lift loader end. ZX machines do not. HT
HT machines have heavy duty counterweight HT HL
3.1

SERVICE FILL CAPACITIES HT SHL ZX

Hydraulic system gal (liters) 63.4 (240)

Fuel tank gal (liters) 79.3 (300)
2.8 HTL

HT SHL
STEERING Hydraulic power steering.
BRAKES Hydraulic power braking on all wheels. In-board mounted, oil immersed, multi-plate disc brakes. 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800
Parking brake, electro-hydraulic disc type operating on transmission output shaft.
Material density (kg/m3)
100%
HT = Standard height arm HL = High lift arm SHL = Super high lift arm ZX = Z bar
115% 95%
Bucket fill factors
 SPECIFICATION 457 WHEEL LOADER

EQUIPMENT
SERVICE AND MAINTENANCE ELECTRICAL (CONTINUED) OPERATOR STATION (CONTINUED)
LiveLink telematics • Turn signals • Rear roller blind +
Engine oil remote drain and fill • White noise reverse alarm and light + Cab air intake filter •
Grouped pressure test points • Work lights in rear grille • Carbon cab air intake filter +
Lockable tool box • Hood operation alarm • 12V in cab power socket •
Lubrication points accessible from ground level • Blue LED reverse lights + 2 x 12V in cab power socket +
24V in cab power socket +
ENGINE DRIVE TRAIN Reversing camera (color) •
Air cleaner – cyclonic pre filter with engine fan scavenge system • 5 speed transmission • Fold away adjustable steering column •
Automatically reversing cooling fan + 5 speed transmission with lock-up torque converter + ROPS/FOPS safety structure •
Crankcase breather oil trap • Operator controlled driving modes – Comfort & Dynamic • Interior light •
DEF fluid • Epicyclical wheel hub reduction • Front primary display screen •
Electrical opening rear hood • Gear kick down on loader control lever • Secondary A post display screen, rotary control menu interface +
Epoxy coated radiator / coolers + Indicator glass for transmission oil level • A post mounted membrane switches •
Fixed mounted fan • Loader lever direction control • Variable fan speed control on climatic control system +
Fuel filter • Neutral start • 2” (50 mm) seat belt •
Fuel pre-filter with water trap • Open differential • 3” (75 mm) seat belt +
Hydraulically driven cooling fan • Open differential with automatic locking -100% (front axle only) + Fire extinguisher (UK only) +
Manual override rear hood opening • Limited slip differentials front and rear + Two speed intermittent front windscreen wipe/wash and self-park •
-20° cold start • Oscillating rear axle • Single speed rear windscreen wipe/wash and self-park •
SCR DPF engine emission control • Power-inch intelligent clutch cut off on footbrake (selectable) • 3 speed heater/demisting •
Swing out fan + Selectable automatic power shift • LH and RH sliding opening windows •
Waste gated turbo • Speed limiter 20km/h + Floor mat •
Widecore radiator • Steering column single lever shift control (direction and gear) • Cup holder •
110v / 240v engine block heater + Transmission cooler bypass + Steering wheel spinner knob •
Internal rear view mirror •
ELECTRICAL BRAKE SYSTEM Tinted cab glass •
120 amp alternator • Multi-plate wet disc brakes • Multi-media port (USB and 3.5mm) +
Amber rotating beacon • Sintered brake pads • Operator stowage •
Electrical adjustable mirrors • Dual circuit hydraulic power • Laminated windscreen •
Heated mirrors • Wheel speed braking • Heated rear screen •
External battery isolator • Parking disc brake on transmission output shaft • Loader control isolator •
Fold down beacon arm • Electrical hydraulic park brake actuation • Horn •
Green seat belt beacon + Adjustable armrest •
Halogen front and rear work lights • OPERATOR STATION Removable storage rubber mats •
LED front and rear work lights + Fully glazed cab • Convex mirror kit (1 on each side) +
360 degree LED work lights + Windscreen guards + Adjustable seat mounted controls •
Hazard warning lights • Air conditioning • In-cab coolbox +
Integrated rear view camera + Climate control + Cab floor carpet +
Number plate light kit + Single lever joystick •
Parking lights • Multi-lever hydraulic controls + FRONT PRIMARY DISPLAY
Radio wiring and speakers • Proportional electro hydraulic auxiliary control + Warning lights
Rear fog light • Air suspension cloth seat • Direction indicators •
Reverse alarm and light • Deluxe heated air suspension cloth seat + Master warning •
Reversing object detection system + Super deluxe heated and cooled air suspension half leather seat + High coolant temperature •
Smart reverse alarm and light + Front roller blind • Battery charging condition •
STANDARD •
OPTIONAL +
 457 WHEEL LOADER SPECIFICATION

EQUIPMENT
FRONT PRIMARY DISPLAY (CONTINUED) FRONT PRIMARY DISPLAY (CONTINUED) HYDRAULIC SYSTEM (CONTINUED)
Warning lights (continued) Data screens (continued) Twin auxiliary hydraulic service +
Low fuel level • Torque convertor temperature • Twin piston pumps with priority steer •
Engine oil pressure • Volume of fuel remaining • Emergency steer back-up •
Hazard lamps • Total fuel used (resettable) • JCB biodegradable hydraulic oil +
Park brake state • Instantaneous fuel use • Electronic hydraulic isolation •
Road lights • Average fuel use (resettable) • Automatic boom kick-out (detent) •
Main beam lights • Current date • Automatic bucket positioner •
Rear fog lights • Machine hours • Front loader float •
Engine pre-heat • Trip distance (resettable) • Indicator glass for hydraulic oil level •
Brake system pressure • Hours to service • Hydraulic oil cooler •
Differential lock • Daily checks
Low steering pressure • Engine oil level • EXTERNAL EQUIPMENT
Buzzer alerts DEF level • Front and rear fenders •
Engine air filter blocked • DPF status • Full rear fenders +
Diesel exhaust fluid (DEF) • Front adjustable mud flaps •
Torque reduction in case of malfunction • RIGHT HAND SECONDARY DISPLAY (OPTIONAL) Front wheel spray guards •
Amber warning lamp • Clock • Rear fender chevrons •
Stop engine • Climate control • Full tire coverage fenders •
Gauge display Fan speed • Automatic greasing system +
Engine speed • In cab temperature set • Grease gun and cartridge +
Coolant temperature • Machine hours • One piece electrical opening hood •
Fuel level • Rear view camera • Mesh air intake screens •
LCD screen display Fuel use • Flexible bottom step •
Current gear • Time and date • Full width rear counterweight •
Stop engine • Auxiliary flow rate + Recovery hitch •
Torque reduction in case of malfunction • Hydraulic oil temperature • Lifting / tie down lugs •
Amber warning lamp • Transmission oil temperature • Rear counterweight chevrons +
Diesel exhaust fluid (DEF) • Auto engine shutdown • Additional rear counterweight (+1706lb (+774kg)) +
Engine air filter blocked • Machine settings screen
Secondary steer system pressure • Coolant temperature • PROTECTIVE EQUIPMENT
Torque lockup • Engine oil pressure • Front cab screen guards +
Steer mode • Air filter • Wastemaster package: includes front and rear light guards, front screen
guard, front and rear belly guards, rear light guards, Wastemaster decal.
+
Ground speed • Transmission sump oil temperature •
Engine speed (numeric display) • Transmission torque convertor temperature • Rear grille guard +
Clock • Hydraulic oil temperature • Fire system +
Hydraulic state • Park brake pressure • Safety strut loader arm •
Smooth Ride System (SRS) + Battery voltage • Light guards +
Beacon • Help display • Front belly guard kits +
Front work lamps • On-screen handbook • Rear belly guard kits +
Rear work lamps • Articulation joint safety strut •
Heated rear screen • HYDRAULIC SYSTEM Front rubber apron mat +
Transmission sump temperature • Smooth Ride System (SRS) +
Data screens Hydraulic quick hitch with in cab isolation + OTHER EQUIPMENT
DEF level • Auxiliary ARV kit + High lift loader end (HT only) +
Hydraulic oil temperature • Auxiliary hydraulic service + Super high lift loader end (HT loader only) +
STANDARD •
OPTIONAL +
SPECIFICATION 457 WHEEL LOADER
457 WHEEL LOADER SPECIFICATION
 ONE COMPANY, OVER 300 MACHINES.

Wheel Loader 457

Gross engine power: 282 hp (210 kW) | Operating weight: 44,090 lb (19,999 kg)
Your nearest JCB dealer Full turn tipping load: 29,696 lb (13,470 kg) | Standard shovel capacity: 4.6 yd3 (3.5m3)
JCB North America
2000 Bamford Blvd., Pooler, Georgia, 31322 Tel: (912) 447-2000
Download the very latest information on this product range at www.jcb.com
JCB inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means, electronic, mechanical,
photocopying or otherwise, without prior permission from JCB inc. All references in this publication to operating weights, sizes, capacities and other performance measurements are
provided for guidance only and may vary dependant upon the exact specification of machine. They should not therefore be relied upon in relation to suitability for a particular
application. Guidance and advice should always be sought from your JCB Dealer. JCB reserves the right to change specifications without notice. Illustrations and specifications shown
may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd.

9999/6088 en-GB | USA 5664 06/2021 JCBNA @JCBNA JCBNORTHAMERICA JCBNA