STB100N10F7, STD100N10F7, STF100N10F7

STI100N10F7, STP100N10F7
Datasheet

N-channel 100 V, 6.8 mΩ typ., 80 A STripFET F7 Power MOSFETs

in D2PAK, DPAK, TO-220FP, I2PAK and TO-220 packages

TAB TAB Features

2 3

3
1
Order codes VDS RDS(on) max. ID Package
1
D2PAK DPAK
STB100N10F7 80 A D2PAK
TAB TAB
STD100N10F7 80 A DPAK
STF100N10F7 100 V 8.0 mΩ 45 A TO-220FP
3 3
2
3 12
1
2 STI100N10F7 80 A I2PAK
1
TO-220FP I2PAK TO-220 STP100N10F7 80 A TO-220

D(2, TAB) • Among the lowest RDS(on) on the market

• Excellent FoM (figure of merit)
• Low Crss/Ciss ratio for EMI immunity
• High avalanche ruggedness

G(1)
Applications
• Switching applications
S(3)

AM01475v1_noZen
Description
These N-channel Power MOSFETs utilize STripFET F7 technology with an enhanced
trench gate structure that results in very low on-state resistance, while also reducing
internal capacitance and gate charge for faster and more efficient switching.

Product status links

STB100N10F7
STD100N10F7
STF100N10F7
STI100N10F7
STP100N10F7

DS9291 - Rev 6 - March 2022 www.st.com

For further information contact your local STMicroelectronics sales office.
 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical ratings

1 Electrical ratings

Table 1. Absolute maximum ratings

Value

D2PAK
Symbol Parameter Unit
DPAK TO-220FP I2PAK
TO-220

VDS Drain-source voltage 100 V

VGS Gate-source voltage ±20 V

Drain current (continuous) at TC = 25 °C 80 45(1) 80 A

ID
Drain current (continuous) at TC = 100 °C 62 32(1) 70 A

IDM(2) Drain current (pulsed) 320 180 320 A

PTOT(1) Total power dissipation at TC = 25 °C 120 30 150 W

Insulation withstand voltage (RMS) from all three leads

VISO to external heatsink 2.5 kV
(t = 1 s, TC = 25 °C)

TJ Operating junction temperature °C

-55 to 175
Tstg Storage temperature range °C

1. This value is limited by package.

2. Pulse width is limited by safe operating area.

Table 2. Thermal resistance

Value

Symbol Parameter I2PAK Unit

D2PAK DPAK TO-220FP
TO-220

RthJC Thermal resistance, junction-to-case 1 1.25 5 1 °C/W

RthJA Thermal resistance, junction-to-ambient 62.5 °C/W

RthJB (1)
Thermal resistance, junction-to-board 30 50 °C/W

1. When mounted on an 1-inch2 FR-4 board, 2oz CU, t < 10 s.

Table 3. Avalanche characteristics

Symbol Parameter Value Unit

Single pulse avalanche energy

EAS 400 mJ
(TJ = 25 °C, L = 3.5 mH, IAS = 15 A, VDD = 50 V, VGS = 10 V)

DS9291 - Rev 6 page 2/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical characteristics

2 Electrical characteristics

TCASE = 25 °C unless otherwise specified.

Table 4. On-/off-states

Test conditions

Symbol Parameter D2PAK, DPAK Min. Typ. Max. Unit

TO-220FP
I2PAK, TO-220

Drain-source breakdown
V(BR)DSS ID = 250 μA, VGS = 0 V 100 V
voltage
VDS = 100 V, VGS = 0 V 1 µA
Zero gate voltage drain
IDSS VDS = 100 V, VGS = 0 V,
current 100 µA
TC = 125 °C(1)

IGSS Gate-body leakage current VGS = 20 V, VDS = 0 V 100 nA

VGS(th) Gate threshold voltage VDS = VGS, ID = 250 μA 2.5 4.5 V

Static drain-source on- VGS = 10 V, VGS = 10 V,

RDS(on) 6.8 8.0 mΩ
resistance ID = 40 A ID = 22.5 A

1. Defined by design, not subject to production test.

Table 5. Dynamic

Symbol Parameter Test conditions Min. Typ. Max. Unit

Ciss Input capacitance - 4369 - pF

VDS = 50 V, f = 1 MHz,
Coss Output capacitance - 823 - pF
VGS = 0 V
Crss Reverse transfer capacitance - 36 - pF

Qg Total gate charge VDD = 50 V, ID = 80 A, - 61 - nC

Qgs Gate-source charge VGS = 0 to 10 V - 26 - nC

(see Figure 17. Test circuit for gate charge
Qgd Gate-drain charge - 13 - nC
behavior)

Table 6. Switching times

Symbol Parameter Test conditions Min. Typ. Max. Unit

td(on) Turn-on delay time VDD = 50 V, ID = 40 A, - 27 - ns

tr Rise time RG = 4.7 Ω, VGS = 10 V - 40 - ns

td(off) Turn-off delay time (see Figure 16. Test circuit for resistive load - 46 - ns
switching times and Figure 21. Switching time
tf Fall time waveform) - 15 - ns

DS9291 - Rev 6 page 3/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical characteristics

Table 7. Source-drain diode

Symbol Parameter Test conditions Min. Typ. Max. Unit

ISD Source-drain current - 80 A

ISDM (1)
Source-drain current (pulsed) - 320 A

VSD(2) Forward on voltage ISD = 80 A, VGS = 0 V - 1.2 V

trr Reverse recovery time ISD = 80 A, di/dt = 100 A/µs - 77 ns

Qrr Reverse recovery charge VDD = 80 V, TJ = 150 °C - 146 nC

(see Figure 18. Test circuit for inductive load
IRRM Reverse recovery current - 4 A
switching and diode recovery times)

1. Pulse width is limited by safe operating area.

2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%

DS9291 - Rev 6 page 4/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical characteristics (curves)

2.1 Electrical characteristics (curves)

Figure 1. Safe operating area for DPAK Figure 2. Thermal impedance for DPAK
AM15754v1
ID
(A)
is
R re a
)
on
ax a
S(
m th is

100
by n
d ni
ite io
m at
Li p e r
O

10 100µs

Zth= k*R thJC

1ms δ = tp /Ƭ
1
Tj=175°C
10ms tp
Tc=25°C
S ingle puls e Ƭ
0.1
0.1 1 10 100 VDS (V)

Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP
AM15755v1
ID
(A)
is
R ea
)
on
ax ar
S(
m is
D
by in th

100
ite n
m ratio
d
pe
O
Li

10 100µs

Zth= k*R thJC

1ms δ = tp /Ƭ
1
Tj=175°C
10ms
Tc=25°C tp
Single pulse Ƭ
0.1
0.1 1 10 100 VDS(V)

Figure 5. Safe operating area for D2PAK, I2PAK and Figure 6. Thermal impedance for D2PAK, I2PAK and
TO-220 TO-220
ID AM15756v1
K δ=0.5 AM15761v1

(A)
is
R re a
)
on
ax a
S(
m th is

100
by n

0.2
d ni
ite io

0.05
m at
Li p e r

0.02
O

0.1
0.01
10 100µs 10 -1

Zth= k*R thJC

1ms δ = tp /Ƭ
1 S ingle puls e
Tj=175°C
10ms
Tc=25°C tp
S ingle puls e Ƭ
0.1 -2

0.1 1 10 100 VDS (V)

10
10 -5 10 -4 10 -3 10 -2 10 -1 t (s )
p

DS9291 - Rev 6 page 5/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical characteristics (curves)

Figure 7. Output characteristics Figure 8. Transfer characteristics

AM15745v1
ID
AM15757v1 ID
(A) (A)
VGS=10V VDS=5V
300 300
9V
250 250
8V
200 200

150 7V
150

100 100
6V
50 50
5V
0 0
0 1 2 3 4 VDS(V) 2 3 4 5 6 7 8 9 10 VGS(V)

Figure 9. Normalized V(BR)DSS vs temperature Figure 10. Static drain-source on-resistance

AM15747v1 AM15748v1
V(BR)DSS RDS(on)
(norm)
ID=250 µA (mΩ)
14.0 VGS=10V
1.04
12.0
1.02
10.0

1 8.0

6.0
0.98
4.0
0.96
2.0

0.94 0.0
-55 -30 -5 20 45 70 95 120 TJ(°C) 0 20 40 60 80 100 ID(A)

Figure 11. Gate charge vs gate-source voltage Figure 12. Capacitance variations
AM15758v1 AM15759v1
VGS C
(V) (pF)
VDD=50V
12 5000
ID=80A
10 Ciss
4000

8
3000
6
2000
4
1000
2
Coss
0 0 Crss
0 20 40 60 Qg (nC) 0 10 20 30 40 50 60 70 80 VDS(V)

DS9291 - Rev 6 page 6/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical characteristics (curves)

Figure 13. Normalized gate threshold voltage vs

Figure 14. Normalized on-resistance vs temperature
temperature
RDS(on) AM15760v2
AM15746v1
VGS(th) (norm)
(norm)
2
1.04 ID = 40 A
ID= 250 µA 1.8
VGS = 10 V
1.02 1.6

1 1.4
1.2
0.98
1
0.96
0.8

0.94 0.6
0.4
0.92 -55 -30 -5 20 45 70 95 120 TJ(°C)
-55 -30 -5 20 45 70 95 120 TJ(°C)

Figure 15. Source-drain diode forward characteristics

AM15749v1
VSD (V)

1.1 TJ=-55°C

0.9 TJ=25°C

0.8

0.7
TJ=150°C

0.6

0.5
0 20 40 60 80 100 ISD(A)

DS9291 - Rev 6 page 7/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Test circuits

3 Test circuits

Figure 16. Test circuit for resistive load switching times Figure 17. Test circuit for gate charge behavior

VDD

12 V 47 kΩ
1 kΩ
100 nF
RL
2200 3.3
+ μF μF VDD
VD IG= CONST
VGS 100 Ω D.U.T.

VGS
RG D.U.T. pulse width +
2.7 kΩ
2200 VG
pulse width μF
47 kΩ

1 kΩ

AM01468v1 AM01469v1

Figure 18. Test circuit for inductive load switching and Figure 19. Unclamped inductive load test circuit
diode recovery times

A A A
D L
fast 100 µH VD
G D.U.T. diode
S B 3.3 1000 2200 3.3
B B + µF
25 Ω D
µF + µF VDD µF VDD
ID
G D.U.T.
+ RG S

_ Vi D.U.T.

pulse width

AM01470v1
AM01471v1

Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform

ton toff
V(BR)DSS
td(on) tr td(off) tf
VD

90% 90%
IDM

10% VDS 10%

ID 0

VDD VDD
VGS 90%

0 10%

AM01472v1 AM01473v1

DS9291 - Rev 6 page 8/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Package information

4 Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages,
depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product
status are available at: www.st.com. ECOPACK is an ST trademark.

4.1 D²PAK (TO-263) type A package information

Figure 22. D²PAK (TO-263) type A package outline

0079457_26

DS9291 - Rev 6 page 9/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
D²PAK (TO-263) type A package information

Table 8. D²PAK (TO-263) type A package mechanical data

mm
Dim.
Min. Typ. Max.

A 4.40 4.60
A1 0.03 0.23
b 0.70 0.93
b2 1.14 1.70
c 0.45 0.60
c2 1.23 1.36
D 8.95 9.35
D1 7.50 7.75 8.00
D2 1.10 1.30 1.50
E 10.00 10.40
E1 8.30 8.50 8.70
E2 6.85 7.05 7.25
e 2.54
e1 4.88 5.28
H 15.00 15.85
J1 2.49 2.69
L 2.29 2.79
L1 1.27 1.40
L2 1.30 1.75
R 0.40
V2 0° 8°

DS9291 - Rev 6 page 10/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
D²PAK (TO-263) type A package information

Figure 23. D²PAK (TO-263) recommended footprint (dimensions are in mm)

0079457_Rev26_footprint

DS9291 - Rev 6 page 11/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type A2 package information

4.2 DPAK (TO-252) type A2 package information

Figure 24. DPAK (TO-252) type A2 package outline

0068772_type-A2_rev30

DS9291 - Rev 6 page 12/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type A2 package information

Table 9. DPAK (TO-252) type A2 mechanical data

mm
Dim.
Min. Typ. Max.

A 2.20 2.40
A1 0.90 1.10
A2 0.03 0.23
b 0.64 0.90
b4 5.20 5.40
c 0.45 0.60
c2 0.48 0.60
D 6.00 6.20
D1 4.95 5.10 5.25
E 6.40 6.60
E1 5.10 5.20 5.30
e 2.159 2.286 2.413
e1 4.445 4.572 4.699
H 9.35 10.10
L 1.00 1.50
L1 2.60 2.80 3.00
L2 0.65 0.80 0.95
L4 0.60 1.00
R 0.20
V2 0° 8°

DS9291 - Rev 6 page 13/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type A2 package information

Figure 25. DPAK (TO-252) recommended footprint (dimensions are in mm)

FP_0068772_30

DS9291 - Rev 6 page 14/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type C package information

4.3 DPAK (TO-252) type C package information

Figure 26. DPAK (TO-252) type C package outline

0068772_C_30

DS9291 - Rev 6 page 15/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type C package information

Table 10. DPAK (TO-252) type C mechanical data

mm
Dim.
Min. Typ. Max.

A 2.20 2.30 2.38

A1 0.90 1.01 1.10
A2 0.00 0.10
b 0.72 0.85
b4 5.13 5.33 5.46
c 0.47 0.60
c2 0.47 0.60
D 6.00 6.10 6.20
D1 5.25
E 6.50 6.60 6.70
E1 4.70
e 2.186 2.286 2.386
H 9.80 10.10 10.40
L 1.40 1.50 1.70
L1 2.90 REF
L2 0.90 1.25
L3 0.51 BSC
L4 0.60 0.80 1.00
L6 1.80 BSC
θ1 5° 7° 9°
θ2 5° 7° 9°
V2 0° 8°

DS9291 - Rev 6 page 16/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type C package information

Figure 27. DPAK (TO-252) recommended footprint (dimensions are in mm)

FP_0068772_30

DS9291 - Rev 6 page 17/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
D²PAK and DPAK packing information

4.4 D²PAK and DPAK packing information

Figure 28. Tape outline

DS9291 - Rev 6 page 18/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
D²PAK and DPAK packing information

Figure 29. Reel outline

40mm min.
access hole
at slot location
B

D C

N
A

Tape slot G measured

in core for at hub
Full radius tape start
2.5mm min.width

AM06038v1

Table 11. D²PAK tape and reel mechanical data

Tape Reel

mm mm
Dim. Dim.
Min. Max. Min. Max.

A0 10.5 10.7 A 330

B0 15.7 15.9 B 1.5
D 1.5 1.6 C 12.8 13.2
D1 1.59 1.61 D 20.2
E 1.65 1.85 G 24.4 26.4
F 11.4 11.6 N 100
K0 4.8 5.0 T 30.4
P0 3.9 4.1
P1 11.9 12.1 Base quantity 1000
P2 1.9 2.1 Bulk quantity 1000
R 50
T 0.25 0.35
W 23.7 24.3

DS9291 - Rev 6 page 19/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
D²PAK and DPAK packing information

Table 12. DPAK tape and reel mechanical data

Tape Reel

mm mm
Dim. Dim.
Min. Max. Min. Max.

A0 6.8 7 A 330
B0 10.4 10.6 B 1.5
B1 12.1 C 12.8 13.2
D 1.5 1.6 D 20.2
D1 1.5 G 16.4 18.4
E 1.65 1.85 N 50
F 7.4 7.6 T 22.4
K0 2.55 2.75
P0 3.9 4.1 Base qty. 2500
P1 7.9 8.1 Bulk qty. 2500
P2 1.9 2.1
R 40
T 0.25 0.35
W 15.7 16.3

DS9291 - Rev 6 page 20/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
TO-220FP package information

4.5 TO-220FP package information

Figure 30. TO-220FP package outline

7012510_Rev_13_B

DS9291 - Rev 6 page 21/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
TO-220FP package information

Table 13. TO-220FP package mechanical data

mm
Dim.
Min. Typ. Max.

A 4.40 4.60
B 2.50 2.70
D 2.50 2.75
E 0.45 0.70
F 0.75 1.00
F1 1.15 1.70
F2 1.15 1.70
G 4.95 5.20
G1 2.40 2.70
H 10.00 10.40
L2 16.00
L3 28.60 30.60
L4 9.80 10.60
L5 2.90 3.60
L6 15.90 16.40
L7 9.00 9.30
Dia 3.00 3.20

DS9291 - Rev 6 page 22/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
I²PAK package information

4.6 I²PAK package information

Figure 31. I²PAK package outline

0004982_Rev_9

DS9291 - Rev 6 page 23/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
I²PAK package information

Table 14. I²PAK package mechanical data

mm
Dim.
Min. Typ. Max.

A 4.40 - 4.60
A1 2.40 - 2.72
b 0.61 - 0.88
b1 1.14 - 1.70
c 0.49 - 0.70
c2 1.23 - 1.32
D 8.95 - 9.35
e 2.40 - 2.70
e1 4.95 - 5.15
E 10.00 - 10.40
L 13.00 - 14.00
L1 3.50 - 3.93
L2 1.27 - 1.40

DS9291 - Rev 6 page 24/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
TO-220 type A package information

4.7 TO-220 type A package information

Figure 32. TO-220 type A package outline

0015988_typeA_Rev_23

DS9291 - Rev 6 page 25/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
TO-220 type A package information

Table 15. TO-220 type A package mechanical data

mm
Dim.
Min. Typ. Max.

A 4.40 4.60
b 0.61 0.88
b1 1.14 1.55
c 0.48 0.70
D 15.25 15.75
D1 1.27
E 10.00 10.40
e 2.40 2.70
e1 4.95 5.15
F 1.23 1.32
H1 6.20 6.60
J1 2.40 2.72
L 13.00 14.00
L1 3.50 3.93
L20 16.40
L30 28.90
øP 3.75 3.85
Q 2.65 2.95
Slug flatness 0.03 0.10

DS9291 - Rev 6 page 26/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Ordering information

5 Ordering information

Table 16. Order codes

Order code Marking Package Packing

STB100N10F7 D2PAK Tape and reel

STD100N10F7 DPAK Tape and reel

STF100N10F7 100N10F7 TO-220FP Tube

STI100N10F7 I2PAK Tube

STP100N10F7 TO-220 Tube

DS9291 - Rev 6 page 27/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7

Revision history

Table 17. Document revision history

Date Version Changes

05-Oct-2012 1 Initial release.

Inserted device in TO-220FP.
Updated title and features on the cover page, Table 1: Device summary, Table
2: Absolute maximum ratings, Table 3: Thermal resistance and Table 5: On/off
07-Feb-2013 2 states accordingly.
Updated Table 6: Dynamic, Table 7: Switching times, Table 8: Source drain
diode and Section 4: Package mechanical data.
Added Section 5: Packaging mechanical data.
Modified: the entire typical values in Table 6, tf typical value in Table 7, VSD
and typical values for trr, qrr, IRRM
29-Apr-2013 3 Inserted: Table 4: Avalanche characteristics and Section 2.1: Electrical
characteristics (curves)
Minor text changes

Inserted device in D2PAK.

Updated title and features on the cover page, Table 1: Device summary, Table
2: Absolute maximum ratings, Table 3: Thermal resistance and Table 5: On/off
25-Nov-2013 4
states accordingly.
Updated Table 6: Dynamic, Section 4: Package mechanical data and Section
5: Packaging mechanical data.
Added STI100N10F7 device and updated the document accordingly.
Removed maturity status indication, updated title, features and description on
cover page.
18-Jun-2018 5
Updated Table 1. Absolute maximum ratings.
Updated Section 4 Package information.
Minor text changes.
Updated Section 4 Package information.
02-Mar-2022 6
Minor text changes.

DS9291 - Rev 6 page 28/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Contents

Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.1 D²PAK (TO-263) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2 DPAK (TO-252) type A2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.3 DPAK (TO-252) type C package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.4 D²PAK and DPAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.5 TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.6 I²PAK package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.7 TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

DS9291 - Rev 6 page 29/30

 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2022 STMicroelectronics – All rights reserved

DS9291 - Rev 6 page 30/30