Automated External Defibrillator
AED-2100K
Step 1. Turn on the AED
When you turn on the power, the lid opens automatically.
Simple voice instructions guide you through the entire procedure.
Step 2. Attach the electrode pads
AED pads are pre-connected, and there is no need to distinguish right from left.
You just remove the backing and press them onto the patient’s chest.
Step 3. Press the shock button
After you attach the pads to the patient’s chest, analysis starts automatically.
If the AED indicates that defibrillation is needed, you just push the blinking shock button. Anyone can save a life!
Self test for reliability The AED has a self check function with daily and monthly tests.
System Test Battery Test Pads Test
Indicates current operation Indicates remaining battery Nihon Kohden pad connectors have special technology* to
with green and red signals. life and possible trouble check and indicate the pad condition.
points. *patent pending
Automated External Defibrillator
AED-2100K
AED-2100K can be used for child by changing pads
and mode switch.
Save data and
review it on a PC
AED-2100K can save 90 minutes ECG data with event
annotation. You can review the data on a PC for
diagnosis.
Bluetooth interface
Rescue data and self-test results can be transferred to a PC by
Bluetooth wireless connection.
The Bluetooth word mark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc.
Options
- AED Box (YZ-042H8) - AED Wall Mount Kit (KG-202V) - Battery Pack (SB-210VK)
- Defibrillation Pads:
for Adult/Child (P-530K)
- Carrying Bag (YC-210V)
- AED Report Viewer (QP-210VK)
- Training Unit (TRN-2100K)
- Pads for Training Unit: for Adult (H326A)
for Child (H326B)
- Spare Stickers for Training Pads (Y262A)
This brochure may be revised or replaced by Nihon Kohden at any time without notice.
6823 CAT.No.58-009C ’11.8. CLB. B.
Printed in Japan