Volvo Crawler Excavators 19.8-20.

5 t 167 hp

EC200D
Volvo Construction Equipment
 Lift and load
for less
Do more and earn more with the EC200D. The Volvo crawler excavator
offers the perfect combination of power and reliability to achieve
outstanding fuel efficiency and long-lasting performance. With ECO Mode,
simplified service and newly designed general-purpose boom and arm, the
result is maximum performance and minimum total cost of ownership.

E for economy Service made simple

Achieve outstanding fuel efficiency and boost profitability with The EC200D is built to ensure servicing is safe, quick and easy,
Volvo’s unique ECO Mode. Volvo’s unique ECO mode features featuring anti-slip plates, grouped filters, ground-level service
sophisticated electronic pump control technology which access and centralized lubrication points. Long service intervals
improves fuel efficiency. ECO mode can be used in the G, H and enhance machine availability and increase uptime for maximum
P work modes. productivity.

Proven reliability
Benefit from a reliable performance, shift after shift with the
EC200D, providing all the built-in quality and reliability you’d Boom and arm you can rely on
expect from Volvo. Built with durable components, the D-Series For optimum machine weight and minimum total cost of
excavator delivers long-lasting performance for excellent return ownership, the newly designed boom and arm is the perfect
on investment and high resale value. choice for general-purpose applications.

2
Do more
with less fuel
Reduce fuel consumption and increase productivity with the EC200D, equipped with advanced features, such as ECO Mode to deliver
lower fuel consumption when compared to similar excavators. The highly efficient and powerful D5 engine works in harmony with the
optimized hydraulic system and the auto-idle function, which also contributes to reduced fuel consumption and optimum profitability.

3
 Made
to measure
High on performance, the Volvo EC200D offers the most cost effective solution for
general-purpose applications. Thanks to the winning combination of the fuel-efficient
Volvo D5 engine and advanced hydraulic system, plus the comfortable cab and improved
controllability, you can count on the EC200D to deliver a smooth and efficient operation.

Comfortable cab
Powered by Volvo Operate comfortably in the Volvo cab, packed with advanced
Experience unparalleled power and productivity with the robust features designed to maximize operator productivity and
D5 engine from Volvo. Working together with the machine’s minimize fatigue. Boasting all-around visibility, ample space,
proven hydraulics, the Tier 3 Volvo engine delivers high torque adjustable seat and ergonomic controls, it’s no wonder the
at low rpm for the ultimate combination of performance and Volvo cab is an industry-leader. For greater machine control and
improved fuel efficiency – making it the ideal machine for efficiency, the cab features a new I-ECU monitor that displays
general-purpose applications. all necessary information for a smooth operation.

Take control The right mode for the job

Dig, swing, load and lift with increased controllability. The Achieve optimum fuel efficiency and machine performance with
EC200D features increased hydraulic flow for responsive, Volvo’s unique, integrated work mode system. Choose the best
accurate control in grading and combined operations. Benefit mode to suit the task at hand, selecting from I (Idle), F (Fine),
from smoother and easier movement when traveling and lifting G (General), H (Heavy) and P (Power max) mode. Select the
simultaneously, as well as better grading quality from the correct mode according to your working conditions for added
harmonized boom and arm movement. versatility and increased productivity.

4
The right machine
for the job
The EC200D is the perfect partner for general-purpose applications – from road construction and building projects to agriculture,
landscaping and utility work. Delivering optimum swing speed, excellent combined operation, powerful digging forces and fast
cycle times – making it the most cost effective solution.

5
 Volvo
versatility
Make sure you are ready to tackle any job. Volvo CE offers a comprehensive range of
attachments that let you handle a wide variety of tasks. The EC200D can be fitted
with a selection of buckets and breakers that work in harmony with the machine
to ensure optimal performance and profitability in any application.

Powerful breakers
Quality Volvo buckets The EC200D can be equipped with either a top or side
Volvo offers a range of high quality buckets designed to perform mounted Volvo hydraulic breaker. With consistent power and
efficiently in a variety of materials. Featuring exceptional design high breaking force you’ll benefit from maximum impact and
and built-in durability, these buckets are equipped with Volvo durability. Set your Volvo breaker at the right frequency to suit
teeth to handle the different applications. your application needs.

Attachment Management System Optional auxiliary piping

Pre-set and adjust hydraulic flow from the monitor inside the cab The Volvo-designed hydraulic breaker piping option provides
with this password-protected management system, providing optimum flow to the hydraulic attachments. State-of-the-art
storage for up to 20 different attachments for increased auxiliary lines allow the correct flow and pressure for special
versatility. attachments.

6
A versatile
machine
Access more applications and efficiently perform a variety of tasks with Volvo’s extensive attachment range. The EC200D is
compatible with a selection of buckets, breakers and piping option that allow you to adapt to any job with ease.
All attachment options ensure a quality performance, high productivity and fast cycle times.

7
 Purpose-built
package
E for economy
Volvo’s intelligent ECO mode
increases fuel efficiency.
Boom and arm you
can rely on
For optimum machine weight
and minimum total cost of
ownership, the new boom and
arm is ideal for general-purpose
applications.

Take control
Increased hydraulic flow ensures
responsive, accurate control in
grading and combined operations.

Proven reliability
Volvo conducts rigorous testing in the
development stages resulting in a reliable
machine that won’t let you down.

Volvo Service
Agreements
Volvo Service Agreements offer
preventive maintenance, total repairs
and a number of uptime services.

The right machine for the job

The EC200D delivers optimum swing speed, excellent combined
operation, powerful digging forces and fast cycle times.

8
 Powered by Volvo
A robust Volvo engine delivers high torque at low rpm for the
ultimate combination of performance and fuel efficiency.

Comfortable cab
A spacious, comfortable operator environment
offers enhanced all-around visibility and a new
I-ECU monitor.

Do more with less fuel

The powerful engine works in harmony with optimized
hydraulics and auto-idle function for lower fuel consumption.

Service made simple

Ground-level service access, centralized
lubrication points and anti-slip plates
make services quick and easy.

Complete solutions The right mode for the job

Volvo provides the right solutions throughout Choose the best mode to suit the task at hand,
the entire life cycle of your machine to lower selecting from I (Idle), F (Fine), G (General),
total cost of ownership. H (Heavy) and P (Power max) mode.

9
 Adding value
to your business
Optimize performance, productivity and reliability with a wide range of
aftermarket services and customer solutions, tailor-made to your business and
operations. Protect your investment with a long-term partnership and benefit
from an array of Genuine Volvo Parts, delivered by passionate people.

What you need, when you need it

Retain high performance and peace of mind with Genuine Dealer at your doorstep
Volvo Parts, because every component is part of something With our extensive infrastructure of technicians, workshops and
bigger. Maintain productivity and machine uptime with our dealers, Volvo is here to fully support you using local knowledge
range of readily available, proven parts – all backed by Volvo and global experience. Whatever you do, wherever you go, your
warranty. Only by using Genuine Volvo Parts, can you protect Volvo dealer is ready to help increase your uptime by attending
your investment, extend machine lifecycle and guarantee long- to your service needs and offer expert support. Contact your
lasting performance. local Volvo dealer to find the right solution for you.

Volvo Service Agreements

Choose from our range of Volvo Service Agreements, offering preventive maintenance, total repairs and a number of uptime services.
Volvo uses the latest technology to monitor machine operation and status, giving you advice to increase your profitability.
By having a Volvo Service Agreement, you are in control of your service costs.

10
Complete
solutions
Volvo has the right solution for you. So why not let us provide all your needs throughout the whole life cycle of your machine?
By listening to your requirements, we can reduce your total cost of ownership and increase your revenue.

11
Volvo EC200D in detail
Engine Hydraulic system
The engine, which provide excellent performance, is equipped with four The hydraulic system and new MCV (main control valve) use intelligent
cylinder, vertical, electronic-controlled high pressure fuel injectors, internal technology to control on-demand flow for highproductivity, high-digging
EGR, 4.7 liter in-line waste gate turbo charger, air-to-air intercooler and capacity and excellent fuel efficiency. The summation system, boom, arm
water cooled diesel engine type. and swing priority along with boom, arm and bucket regeneration provides
optimum performance.
Engine Volvo D5E
The following important functions are included in the system:
Max power at r/min 2 000 Summation system: Combines the flow of both hydraulic pumps to
ensure quick cycle times and high productivity.
Net, ISO 9249/SAE J1349 kW 115
Boom priority: Gives priority to the boom operation for faster raising
hp 156 when loading or performing deep excavations.
Arm priority: Gives priority to the arm operation for faster cycle times in
Gross, ISO 14396/SAE J1995 kW 123 leveling and for increased bucket filling when digging.
hp 167 Swing priority: Gives priority to swing functions for faster simultaneous
operations.
Max torque Nm 670 Regeneration system: Prevents cavitation and provides flow to other
at engine speed r/min 1 600 movements during simultaneous operations for maximum productivity.
Holding valves: Boom and arm holding valves prevent the dgging
No. of cylinders 4 equipment from creeping.
Displacement l 4.7 Main pump. Type: 2 x Variable displacement axial piston pumps
Bore mm 108 Maximum flow l/min 2 x 200
Stroke mm 130 Pilot pump. Type: Gear pump
Electrical system Maximum flow l/min 1 x 20
High-capacity electrical system that is well protected. Waterproof Relief value setting pressure
double-lock harness plugs are used to secure corrosion-free connections.
The main relays and solenoid valves are shielded to prevent damage. Implement MPa 32.4
The master switch is standard. Travel circuit MPa 32.4
Voltage V 24 Slew circuit MPa 28.4
Batteries V 2 x 12 Pilot circuit MPa 3.9
Battery capacity Ah 100 Hydraulic Motors
Alternator V/A 28 / 80 Travel Variable displacement axial piston motor with mechanical brake
Start motor V - kW 24 - 5.5 Swing Fixed displacement piston motor with mechanical brake
Hydraulic Cylinders
Swing system
Mono boom 2
The swing system uses an axial piston motors, driving a planetary gearbox
for maximum torque. An automatic holding brake and antirebound valve Bore x Stroke ø x mm 120 x 1 235
are standard.
Arm 1
Max. slew speed r/min 13.1
Bore x Stroke ø x mm 130 x 1 540
Max. slew torque kNm 69.2
Bucket 1
Travel System
Bore x Stroke ø x mm 115 x 1 065
Each track is powered by an automatic two-speed shift travel motor.
The track brakes are multi-disc, spring-applied and hydraulic released. Service Refill
The travel motor, brake and planetary gears are well protected within the
track frame. Fuel tank l 330

Max. drawbar pull kN 174 Hydraulic system, total l 280

Max. travel speed (low) km/h 3.3 Hydraulic tank l 145

Engine oil l 17
Max. travel speed (high) km/h 5.5
Engine coolant l 15
Gradeability ° 35
Slew reduction unit l 5.3
Undercarriage
Travel reduction unit l 2 x 3.5
The undercarriage has a robust X-shaped frame. Greased and sealed track
chains are standard. Cab
Track shoes 2 x 46 The operator’s cab has easy access via a wide door opening. The cab is
supported on hydraulic dampening mounts to reduce shock and vibration
Link pitch mm 190 levels. These along with sound absorbing lining provide low noise levels.
Shoe width, triple grouser mm 600 / 800 The cab has excellent all-round visibility. The front windshield can easily
slide up into the ceiling.
Bottom rollers 2x7 Integrated air-conditioning: The pressurized and filtered cab air is supplied
Top rollers 2x2 and the air is distributed throughout the cab from 9 vents.
Ergonomic operator’s seat: The adjustable seat and joystick console
move independently to accommodate the operator. The seat has different
adjustments plus a seat belt for the operator’s comfort and safety.
Refrigerant of the type R134a is used when this machine is equipped
with air conditioning. Contains fluorinated greenhouse gas R134a, Global
Warming Potential 1.430 t CO2-eq
Sound Level
Sound level in cab according to ISO 6396
LpA (tropical) dB(A) 71
External sound level according to ISO 6395 and EU Noise Directive
(2000/14/EC)
LwA (tropical) dB(A) 106

12
Specifications

MACHINE DIMENSIONS
Description Unit EC200D
Boom m 5.7 5.7
Arm m 2.9 2.5
A Overall width of upper structure mm 2 540 2 540
B Overall width mm 2 800 2 800
C Overall height of cab mm 2 910 2 910
D Tail swing radius mm 2 860 2 860
E Overall height of engine hood mm 2 310 2310
F Counterweight clearance * mm 1 005 1 005
G Tumbler length mm 3 370 3 370
H Track length mm 4 170 4 170
I Track gauge mm 2 200 2 200
J Shoe width mm 600 600
K Min. ground clearance * mm 450 450
L Overall length mm 9 560 9 615
M Overall height of boom mm 2 920 3 060
* Without shoe grouser

BOOM AND ARM

Description Unit Mono boom Arm
m 5.7 2.5 2.9
A. Length mm 5 910 3 525 3 910
B. Height mm 1 585 860 860
Width mm 670 440 440
Weight kg 1 851 1 006 1 017
Boom: Includes cylinder, piping and pin, excludes boom cyl. Pin
Arm: Includes cylinder, linkage and pin

13
Specifications

WORKING RANGES WITH DIRECT FIT BUCKET

Description Unit EC200D
Boom m 5.7 5.7 5.7
Arm m 2.5 2.9 2.9
Bucket size m3 0.92 0.8 0.92
A Max. digging reach mm 9 460 9 840 9 880
B Max. digging reach on ground mm 9 310 9 700 9 740
C Max. digging depth mm 6 280 6 680 6 720
D Max.digging depth (I=2.44 m level) mm 6 050 6 490 6 530
E Max. vertical wall digging depth mm 5 570 6 040 6 070
F Max. cutting height mm 9 130 9 370 9 410
G Max. dumping height mm 6 350 6 570 6 530
H Min. front swing radius mm 3 680 3 650 3 650
DIGGING FORCES WITH DIRECT FIT BUCKET
Bucket radius mm 1 468 1 418 1 468
Normal SAE J1179 kN 113 116 113
Power boost SAE J1179 kN - - -
Breakout force (bucket)
Normal ISO 6015 kN 126 130 126
Power boost ISO 6015 kN - - -
Normal SAE J1179 kN 99 90 89
Power boost SAE J1179 kN - - -
Tearout force (arm)
Normal ISO 6015 kN 101 93 92
Power boost ISO 6015 kN - - -
Rotation angle, bucket ° 175 175 175

14
BUCKET SELECTION GUIDE
EC200D, 5.7 m Boom, 2.9 m Arm,
Capacity Cutting width Weight Teeth
Bucket type 4 100 kg counterweight Lifting hook
m³ mm kg EA 600 mm shoe 800 mm shoe
0.8 950 771 4 B B None
Direct fit Buckets General purpose 0.92 1 050 819 4 B B None
0.92 1 050 862 4 B B Hook
Please consult with your Volvo dealer for the proper match of buckets and attachments to suit the application.
The recommendations are given as a guide only, based on typical operation conditions.
Bucket capacity based on ISO 7451, heaped material with a 1:1 angle of repose.
Maximum materal density
A 1 200~1 300 kg/m3 Coal, Caliche, Shale
B 1 400~1 600 kg/m3 Wet earth and clay, Limestone, Sandstone
C 1 700~1 800 kg/m3 Granite, Wet sand, Well blasted rock
D 1 900 kg/m3 ~ Wet mud, Iron ore
X : Not recommended

MACHINE WEIGHTS AND GROUND PRESSURE

EC200D, 5.7 m boom, 2.9 m arm, 0.8 m³ / 624 kg bucket, 4 100 kg
counterweight
Shoe Operating Ground Overall
Description width weight pressure width
mm kg kpa mm
600 19 760 44.2 2 800
Triple grouser
800 20 310 34.1 3 000

LIFTING CAPACITY EC200D

Lifting capacity at the arm end without bucket.
For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick coupler from the following values.
Lifting hook 1.5m 3.0m 4.5m 6.0m 7.5m Max. Reach
related to Along Across Along Across Along Across Along Across Along Across Along Across
ground level m
UC UC UC UC UC UC UC UC UC UC UC UC
Boom : 5.7 m 7.5 m kg *4 520 *4 520 5.6
Arm : 2.5 m 6.0 m kg *4 360 *4 360 *4 430 3 610 6.8
Shoe : 600 mm 4.5 m kg *5 550 *5 550 *4 760 4 370 *4 480 3 040 *4 490 2 980 7.6
CWT : 4 100 kg 3.0 m kg *7 130 6 290 *5 450 4 150 4 520 2 950 4 090 2 670 8.0
1.5 m kg *8 540 5 830 6 140 3 920 4 400 2 850 3 940 2 550 8.1
0m kg *9 180 5 620 5 970 3 780 4 330 2 780 4 030 2 600 7.9
-1.5 m kg *9 050 *9 050 *9 110 5 580 5 920 3 720 4 420 2 830 7.4
-3.0 m kg *11 740 10 890 *8 380 5 670 5 980 3 780 5 360 3 420 6.5
-4.5 m kg *9 060 *9 060 *6 470 5 910 *5 610 5 090 5.0
Boom : 5.7 m 7.5 m kg *4 520 *4 520 5.6
Arm : 2.5 m 6.0 m kg *4 360 *4 360 *4 430 3 700 6.8
Shoe : 800 mm 4.5 m kg *5 550 *5 550 *4 760 4 470 *4 480 3 110 *4 490 3 050 7.6
CWT : 4 100 kg 3.0 m kg *7 130 6 430 *5 450 4 240 4 640 3 030 4 200 2 740 8.0
1.5 m kg *8 540 5 970 *6 160 4 020 4 520 2 930 4 050 2 620 8.1
0m kg *9 180 5 760 6 130 3 870 4 440 2 850 4 140 2 670 7.9
-1.5 m kg *9 050 *9 050 *9 110 5 720 6 080 3 820 4 540 2 910 7.4
-3.0 m kg *11 740 11 140 *8 380 5 810 6 140 3 880 5 500 3 510 6.5
-4.5 m kg *9 060 *9 060 *6 470 6 060 *5 610 5 220 5.0
Boom: 5.7 m 7.5 m kg *4 180 *4 180 *4 230 *4 230 6.1
Arm: 2.9 m 6.0 m kg *4 070 *4 070 *4 030 3 320 7.3
Shoe: 600 mm 4.5 m kg *4 520 4 470 *4 270 3 120 *3 970 2 800 8.0
CWT: 4 100 kg 3.0 m kg *6 730 6 450 *5 250 4 240 *4 580 3 030 3 850 2 540 8.4
1.5 m kg *8 270 5 970 *6 030 4 010 4 460 2 910 3 720 2 430 8.5
0m kg *4 510 *4 510 *9 140 5 700 6 030 3 840 4 370 2 830 3 790 2 460 8.3
-1.5 m kg *5 210 *5 210 *8 680 *8 680 *9 280 5 950 3 770 4 330 2 800 4 110 2 660 7.8
-3.0 m kg *9 580 *9 580 *12 570 10 850 *8 750 5 680 5 980 3 790 4 850 3 130 7.0
-4.5 m kg *10 230 *10 230 *7 260 5 870 *5 490 4 320 5.6
Boom: 5.7 m 7.5 m kg *4 180 *4 180 *4 230 *4 230 6.1
Arm: 2.9 m 6.0 m kg *4 070 *4 070 *4 030 3 390 7.3
Shoe: 800 mm 4.5 m kg *4 520 *4 520 *4 270 3 200 *3 970 2 870 8.0
CWT: 4 100 kg 3.0 m kg *6 730 6 590 *5 250 4 330 *4 580 3 100 3 960 2 600 8.4
1.5 m kg *8 270 6 110 *6 030 4 100 4 580 2 990 3 830 2 500 8.5
0m kg *4 510 *4 510 *9 140 5 840 6 190 3 940 4 480 2 900 3 900 2 530 8.3
-1.5 m kg *5 210 *5 210 *8 680 *8 680 *9 280 5 770 6 110 3 860 4 450 2 870 4 220 2 730 7.8
-3.0 m kg *9 580 *9 580 *12 570 11 110 *8 750 5 820 6 140 3 890 4 980 3 210 7.0
-4.5 m kg *10 230 *10 230 *7 260 6 010 *5 490 4 430 5.6
Notes: 1. Machine in “Fine Mode-F” (Power Boost) for lifting capacities. 2. The above loads are in compliance with SAE J1097 and ISO 10567 Hydraulic
Excavator Lifting Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an
asterisk (*) are limited by hydraulic capacity rather than tipping load.marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.

15
Equipment
STANDARD EQUIPMENT STANDARD EQUIPMENT
Engine Cab and interior
Turbocharged, 4 stroke diesel engine with water cooling, direct injection Silicon oil and rubber mounts with spring
and charged air cooler Adjustable operator seat with heater and joystick control console
Air filter with indicator Control joysticks with semi-long
Air intake heater Flexible antenna
Screen without pre-cleaner Control lock out lever
Fuel filter and water separator Air conditioner - manual (no heater)
Alternator, 80A Cab, all-weather sound suppressed, includes:
Electric / Electronic control system - Cup holders
Power max mode - Door locks
Contronics - Tinted glass
- Advanced mode control system - Floor mat
- Self-diagnostic system - Horn
Machine status indication - Large storage area
Engine speed sensing power control - Pull-up type front window
Automatic idling system - Removable lower windshield
Safety stop/start function - Seat belt
Adjustable LCD color monitor - Safety glass
Master electrical disconnect switch - Windshield wiper with intermittent feature
Engine restart prevention circuit Master key
High-capacity halogen lights: Track shoes
- Frame-mounted 600 mm with triple grousers
- Boom-mounted
Batteries, 2 x 12 V / 100 Ah
Start motor, 24 V / 5.5 kW
OPTIONAL EQUIPMENT
Frame
Engine
Access way with handrail
Water separator without heater
Tool storage area
Combined water separator
Punched metal anti-slip plates
Precleaner, cyclone
Under cover
Electric
Full height counterweight 4 100 kg
Extra lights:
4100kg counterweight
- Cab-mounted 3 (front 2, rear 1)
Undercarriage
- Counterweight-mounted 1
Hydraulic track adjusters
Travel alarm
Greased and sealed track link
Anti-theft system
Track Guard
Rotating warning beacon (LED)
600mm with triple grousers
Caretrack, GSM/SAT
Hydraulic system
Caretrack subscription,GSM/SAT
Automatic sensing hydraulic system
Fuel filler pump, 35 lpm,A
- Summation system
Climate cont-A/C+heater,SC,A
- Boom priority
Radio with MP3/AUX,Semi-Cab
- Arm priority
SAT deactivation
- Swing priority
Frame
“ECO” mode fuel saving technology
Rear view mirror on CWT
Boom, arm and bucket regeneration valves
Side mirror on Tank
Swing anti-rebound valves
Track shoes
Boom and arm holding valves
600/800 mm with triple grousers
Multi-stage filtering system
GP Belly cover
Cylinder cushioning
Hydraulic system
Cylinder contamination seals
Hydraulic oil, ISO VG 46, 68
Auxiliary hydraulic valve
Hydraulic oil 46, 68
Hydraulic oil, ISO VG 46
Longlife hyd oil mineral 32, 68
Hydraulic piping:
- Breaker, 1 pump flow
Additional return filter for breaker
Cab and interior
Fabric seat without heater
Fabric seat with heater and air suspension
Sun screens, front, roof, rear
Specific key
Electric pedal for breaker
Digging equipment
5.7 m Boom
Arm: 2.9 m, 2.9m with strip, 2.5m
GP: 0.80 m3 / 0.92 m3 / 1.0 m3 bucket with / without hook
Service
Tool kit, daily maintenance
Tool kit, full scale

16
SELECTION OF VOLVO OPTIONAL EQUIPMENT

Air Conditioning Extra Work Lights

LED Beacon Pre-cleaner, Cyclone

Auxilary piping Breaker

Not all products are available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice.
The illustrations do not necessarily show the standard version of the machine.

17
18
19
Ref. No 20057301_C / English-30 / 2023.07 / EXC / Volvo, Global Marketing