R&S®M3SR SERIES4400

RADIOS
VHF/UHF radio f­ amily for stationary
and ship­borne communications

Product Brochure
Version 09.00
2
CONTENTS
At a glance
► page 4

Secure ­communications
► page 6

Ease of operation
► page 8

Unrivaled radio p­ arameters

► page 9

Flexible range of a­ pplications

► page 10

Flexible and safe i­nvestment for the future

► page 12

Low maintenance
► page 13

Radios in a mobile ATC tower

► page 14

Remote control and m

­ onitoring of radios
► page 15

Voice over internet protocol (VoIP)

► page 16

High data rate network solutions

► page 18

Product overview
► page 19

Rohde & Schwarz R&S®M3SR Series4400 Radios 3

AT A GLANCE
To ensure secure radiocommunications and ­successful accomplishment of missions, today's s­ tationary
radiocommunications solutions for civil and ­military applications must meet extremely ­demanding RF
requirements and also provide high ­operating ­reliability. The R&S®M3SR Series4400 radio family is designed
for ­stationary civil and ­military secure voice and data communications. It ­features high ­modularity and
outstanding specifications.

The R&S®M3SR Series4400 radios provide continuous AM The R&S®M3SR Series4400 offers military users a wide
and FM transmission coverage from 100 MHz to 512 MHz. range of interfaces and associated proprietary frequency
The radios were developed in line with international civil air hopping waveforms, as well as radiocommuni­cations in
traffic control guidelines and standards (ICAO Annex 10, line with NATO standards. Military data transmission meth-
EN 300676). The radios also fulfill UHF communications ods such as LINK 11 and LINK 22 are supported. To ensure
­requirements in line with EN 302617. that existing R&S®M3SR ­Series4400 systems remain up-to-
date, their functionality can be enhanced through subse-
quent software downloads and, if necessary, by using new
hardware modules.

Volume control for

­loudspeaker and headset

Function keys and

Control unit power on/off

Fillgun interface Headset connector

Ethernet LAN interface Indicators

4
KEY FACTS
► Extended frequency range from 100 MHz to 512 MHz for coverage of various civil and military
communications modes
► Output power up to 100 W for deployment with EPM (ECCM) waveforms for increased performance
► TCP/IP based interfaces for remote control, voice over IP (VoIP) and for service/maintenance activities
► Simple network management protocol (SNMP) for establishing radiomonitoring and remote control
applications with automated TRAP reporting
► Continuous transmission at temperatures up to +55 °C
► Interfaces for external cipher units and modems

Ground ­connector

Software-controlled fans Interface expansion slots

Antenna connector Serial interfaces

DC output Audio interfaces

DC battery input Software-configurable ­interfaces

DC input External filter and power amplifier i­nterfaces

Reference ­frequency input and output Ethernet LAN, VoIP and remote control interface

Rohde & Schwarz R&S®M3SR Series4400 Radios 5

SECURE ­COMMUNICATIONS
The R&S®M3SR Series4400 radio family features a range of different methods for transmitting voice
and data. Such functional features are loaded in the radio as software and with optional hardware.
The R&S®M3SR Series4400 radio family also has ­diverse standardized interfaces for connecting e­ xternal
­modems in order to support special transmission methods. The wider transmission bandwidths enable
higher throughput rates.

NATO and proprietary EPM (ECCM) waveforms waveforms, can be easily connected to and operated
In addition to supporting the well-established NATO with the R&S®M3SR Series4400. Proprietary EPM (ECCM)
EPM (ECCM) UHF waveforms HAVE QUICK II and waveforms such as R&S®SECOS contain embedded soft-
SATURN, the R&S®M3SR Series4400 radio family fea- ware encryption for secure communications. Together
tures a range of proprietary waveforms. External encryp- with user-specific algorithms and methods for secure
tion devices such as the ELCRODAT 4-2, which are used data transfer, users benefit from a comprehensive, ver-
in NATO applications in conjunction with EPM (ECCM) satile communications package. Multiple EPM (ECCM)

6
waveforms can be loaded into a radio — for instance Methods for secure data transmission over TDMA based
HAVE QUICK II together with R&S®SECOS. The desired radio networks (optional)
waveform can be selected by ­using the remote control Via the R&S®SECOS waveform, the R&S®M3SR Series4400
unit or the built-in local control panel. radio family supports different data transmission modes,
including time division multiple access (TDMA). In a
70 MHz up-/downconverter for external modems (optional) TDMA network, a large number of participants can be part
The R&S®UX4401 70 MHz IF converter interface ­module of a structured data network over which data i­nformation
is designed for use with a variety of existing external is automatically exchanged. Network participants can
modems that have a standard IF interface. This RF inter- switch dynamically between different TDMA networks.
face allows the use of diverse waveforms with wider Multiple TDMA subnetworks can be combined into a large
transmission bandwidths, enabling high data rates. Fine data network. Data can be exchanged across all subnet-
adjustment of the radio parameters helps achieve wider works involved. Data transmission is encrypted using
coverage. ­either fixed frequency mode or frequency hopping.

Interface for external encryption devices

The radio wideband interfaces of the
R&S®M3SR ­Series4400 are specially designed for opera-
tion with external encryption devices. The radio interface
supports a wide range of external encryption devices and
supports baseband and diphase transmission modes.

Remote key loading

In conjunction with the proprietary EPM (ECCM) wave-
form, encrypted configuration data can be loaded directly
into the R&S®M3SR Series4400 radios via the remote
control interface. This data can consist of new keys or
data sets for secure communications. This vastly simpli-
fies the management, structure and configuration of such
systems.

Support for various LINK methods

Besides EPM (ECCM) waveforms, the
R&S®M3SR ­Series4400 radio family supports tactical digi-
tal information link (TADIL) methods such as LINK 11 and
LINK 22. Both methods are an integral part of the current
and future NATO communications structure.

R&S®M3SR Series4400 radios used in ground, naval and airborne ­installations for
seamless voice/data communications networks

Rohde & Schwarz R&S®M3SR Series4400 Radios 7

EASE OF OPERATION
Rohde & Schwarz has extensive experience with ­stationary radios, which is reflected in the operating
concept of the R&S®M3SR Series4400 radios. The display and control elements are ­arranged in a user-
friendly manner and are easy to understand.

Intuitive graphical user interface (GUI) Plain-text status and warning messages
Complex radio methods require an intuitive user interface. Because status and warning messages are highly impor-
The user interface of the R&S®M3SR Series4400 radio fam- tant to the user, they are visually differentiated from the
ily is clearly laid out and uses icons for intuitive control. rest of the display. Messages are displayed in a menu in
These icons allow the user to immediately draw conclu- plain text so that any user can immediately comprehend
sions regarding the current operating mode of the radio them. Critical and waveform-dependent status messages
without pressing a key, which significantly increases ease are color-coded. All warning messages are stored in the
of operation. They also simplify orientation in the menu radio for later analysis. Readout and storage in an exter-
structure of the control unit to ensure fast and reliable con- nal medium is possible with the R&S®ZS4400 service and
figuration of the radio. maintenance tool.

The GUI is presented on the TFT display of the Automatic remote control access management
R&S®GB4000C control unit, which is available as a stand- For large-scale systems that have multiple local or remote
alone or built-in version. control units, access management is necessary in order
to enable remote control of the radios. The GUI displays
Password-protected access the access authorization level and the status of the radio
The settings for maintenance and configuration of the remote control links for immediate overview.
­radio are protected by a password. This ensures that only
authorized personnel can carry out maintenance or in-
depth configuration of the radio. This concept is based on
many years of practical experience.

R&S®GB4000C local/remote control unit

8
UNRIVALED RADIO ­PARAMETERS
Excellent RF characteristics Robust design for unfavorable RF conditions
The R&S®M3SR Series4400 radio family features excellent R&S®M3SR Series4400 radios are prepared for unfavorable
RF characteristics. The combination of analog and digital RF environments. Even antennas that create a high volt-
technology provides high signal purity that results in opti- age standing wave ratio (VSWR) can be connected with-
mal transmission quality and extremely clear voice com- out difficulty. The impact of high receive levels is compen-
munications. Very fast frequency hopping and compatible sated for by excellent RF large-signal immunity. Protection
filter methods yield an optimal RF signal spectrum, signifi- circuits prevent damage to the R&S®M3SR Series4400
cantly reducing collocation influence typically caused by modules.
adjacent transmit and receive stations.
Integratable UHF circulator with VHF bypass function for
Frequency generation in the R&S®M3SR Series4400 sys- improved intermodulation rejection (optional)
tems is performed by a special, state-of-the-art synthe- The R&S®M3SR Series4400 radio family can be equipped
sizer module to provide spectrally pure signals and ensure with an optional UHF circulator. The circulator helps to sig-
high-quality radio links. Very rapid frequency generation nificantly reduce intermodulation products, which further
and frequency setting enables the use of fast EPM (ECCM) improves system performance.
waveforms while retaining the high quality of the RF
signals. Integrating a circulator into the radio eliminates the need
for complex external circuitry and measures. The circulator
is equipped with a bypass for the VHF band and is avail-
Transceiver cosite considerations able as an upgrade kit.
Standard installation without
Standard cosite ¸FD4430 embedded Frequency agile pre-/postselector for optimum
considerations pre-/postselector interference‑free operation (optional)
Defense communications sites often require a large num-
ber of antennas that must be properly decoupled to pre-
vent the effects of collocation. To minimize these influ-
ences, the R&S®M3SR Series4400 radio family can be
equipped with an optional filter. The R&S®FD4430 filter
provides additional RF decoupling for practically inter-
ference-free operation in demanding RF environments.
Distance Wideband noise generated by the radios as well as the
­influence of cross-modulation are considerably reduced.

The R&S®FD4430 filter works with EPM (ECCM) wave-

forms. The ability to integrate the filter into the radio saves
space and reduces installation effort. The filter is only suit-
able for radio equipment exclusively used for activities
concerning public security, defense and state security.
Possible installation
using the ¸FD4430 70 MHz wideband interface for modem applications (optional)
embedded frequency agile
pre-/postselector
The R&S®M3SR Series4400 provides a 70 MHz IF interface
for operation with external modem solutions. The interface
provides a wideband IF channel for high data rate appli-
cations up to Mbps. The module can adapt to different IF
operating levels. The user can select the RX gain control
mode and the transmitted power.

Rohde & Schwarz R&S®M3SR Series4400 Radios 9

FLEXIBLE RANGE OF ­APPLICATIONS
In order to meet the individual needs of the users, the R&S®M3SR Series4400 radio family features a highly
modular design. Depending on the mission scenario, the radios are configurable to provide the specific
functions that are required.

Software defined radio concept loaded at a later time. That means ­existing software
Software can be loaded into the radio using the ­functions can be enhanced without opening the radio or
R&S®ZS4400 service and maintenance tool. Numerous replacing hardware modules. The current status of the
software packages are available for this purpose. This software is shown in a comprehensive inventory report,
approach also allows functional enhancements to be which contains the versions of the software and its
components.

Highly modular design enabling scalable radios

The R&S®M3SR Series4400 radio family features a highly
modular design. The maintenance-friendly structure short-
ens repair times (MTTR) and makes it easy to adapt the
system to user requirements. All R&S®M3SR ­Series4400
radios have the same base configuration, a logistical
­platform for scalability. The radio modules are updated by
replacing them with new versions. The modular design
allows the radio to be equipped with new functions and
options.

Modular design of the R&S®M3SR Series4400 radio family

10
VoIP interface (optional) The power supply is monitored automatically by means
The radio provides a VoIP interface in addition to the ana- of a BIT function in the R&S®M3SR Series4400 radio. The
log ports. The VoIP interface allows users to establish AC power supply complies with current standards and
redundant and IP based communications systems using contains active power factor correction. Supply voltage
modern system concepts. The radio provides a state- fluctuations are compensated for without affecting radio
of-the-art voice communications solution in line with operation.
the EUROCAE ED-137 standard to ensure international
interoperability.

Flexibility when selecting the voltage source ­(multirange AC

power supply, direct DC input)
All R&S®M3SR Series4400 radios come with two indepen-
dent DC inputs. One input is used for the main power sup-
ply, and the other for a redundant source. The radio moni-
tors both inputs. An external multirange AC power supply
available from Rohde & Schwarz enables operation of the
radio with conventional AC power grids.

R&S®M3SR Series4400 in a mobile ATC tower R&S®M3SR Series4400 used for civil/military ATC applications

R&S®M3SR Series4400 used on naval platforms

Rohde & Schwarz R&S®M3SR Series4400 Radios 11

FLEXIBLE AND SAFE ­INVESTMENT
FOR THE FUTURE
R&S®M3SR Series4400 radios offer a safe investment for the future. The flexible concept is designed for
long-term use. The functionality of the system can be expanded via hardware and software to adapt it to
new requirements.
Hardware and software upgrades The parts and components were selected specifically
The software defined architecture of the with reliability and long-term availability in mind to assure
R&S®M3SR ­Series4400 radios makes it possible to pro- their reliable procurement over a long time frame. When
cure equipment with the required, up-to-date functional- selecting parts, Rohde & Schwarz relied on its decades of
ity. Upgrading and reconfiguring at a later point enables experience in the production of high-quality electronic
the user to adapt the radios to changing r­ equirements equipment.
and needs. This permits a timely response to new stan-
dards and user requirements and is the most cost-effective Low lifecycle costs
approach to procuring ­radio equipment. The R&S®M3SR ­Series4400 radio family features convinc-
ingly low lifecycle costs that are achieved through:
Integrated in the NATO logistics structure ► Minimum training due to the user-friendly GUI concept
The R&S®M3SR ­Series4400 radio family is included in the ► Fast on-site repairs due to module replacement; very
NATO logistics structure. Current R&S®M3SR ­Series4400 low MTTR (15 min)
radio models have a NATO stock number (NSN). ► Integrated, highly-precise, stable clocking source
(OCXO)
► Washable, reusable dust protection
► Software-regulated cooling fans
► High MTBF

R&S®M3SR Series4400
radios used in
semi-mobile installations

12
LOW MAINTENANCE
The R&S®M3SR Series4400 radios were developed with low maintenance in mind. A variety of control and
monitoring functions are available that support the user with detailed status information about the radios.
Built-in test functions permit service and maintenance tasks to be carried out in a targeted manner. The
radios can be remotely analyzed, eliminating the need for on-site service. Resistance to vibrations and a
wide operating temperature range allow the radios to be used in diverse applications.

IP based maintenance tool supporting radio cloning Powerful built-in test (BIT)
The IP based R&S®ZS4400 service and maintenance tool In addition to the normal power-on BIT (PBIT) and continu-
is a vital accessory for the R&S®M3SR Series4400 radios. ous BIT (CBIT), the R&S®M3SR Series4400 also features
It works in any standard IP network, requires no additional an initiated BIT (IBIT) for checking the receive and trans-
cable and can be used on conventional computers. mit functions of the radio. The transmitter and receiver are
tested by means of an internal loopback. The radio ana-
A wealth of useful functions not only track the status of lyzes the signal on the receive side and documents any
the radios in detail, but also transfer configurations from deviations. The R&S®GB4000C remote/local control unit
one radio to another (cloning). Cloning permits the fast, contains an IBIT that can also be used to perform an on-
time-saving and error-free dissemination of radio-specific site interactive check of the functions. The IBIT can be car-
settings to the R&S®M3SR Series4400 radios. Cloning ried out after radio upgrade or at regular intervals without
makes it easier to replace a radio with another radio of external test equipment.
the same type if service and maintenance is required. The
R&S®ZS4400 service and maintenance tool is also used to No tuning of the RF modules required
load the radio software. The R&S®M3SR Series4400 radio modules require no cali-
bration. If a module is replaced or if a radio is extended
with additional modules, no manual settings are required
on the modules.

A built-in, high-grade oven-controlled crystal oscillator

(OCXO) ensures high frequency accuracy.

High reliability
Rohde & Schwarz boasts decades of experience in the
design and production of electronic modules, particularly
for RF applications, which ensures that its
R&S®M3SR Series4400 radios provide a high level of reli-
ability and functional readiness.

The perfect synergy of mechanical design, temperature

monitoring and cooling makes sure that high ambient
temperatures, vibrations and humidity do not impact per-
formance or cause damage to the radio. The extremely
powerful, software-controlled cooling assures stable
continuous operation and long life even in unfavorable
ambient conditions such as low air pressure. The MTBF
achieved in practice is more than 80 000 operating hours.

R&S®ZS4400 service and

maintenance tool

Rohde & Schwarz R&S®M3SR Series4400 Radios 13

RADIOS IN A MOBILE ATC TOWER
The R&S®M3SR Series4400 is designed to be used in Such filter concepts are essential, particularly for voice
mobile military and civil ATC tower solutions. Since and data ­applications that use EPM (ECCM) waveforms.
­multiple radios and their associated antennas must be
simultaneously operated in extremely tight quarters, ­users The radios are fully operated via IP with R
­ &S®VCS-4G and
face a highly demanding RF environment. This can be R&S®GB4000C remote control units. IP telephones and
overcome by deploying integrated R&S®M3SR Series4400 voice recorders are part of the IP‑based system.
filters and by u
­ sing external Rohde & Schwarz VHF/UHF fil-
ter units.

Typical semi-mobile ground/air/ground communications solution

VHF/UHF antenna VHF/UHF antenna ¸HK014 ¸AD40xx GPS antenna

UHF VHF

¸FU221 ¸FU221 ¸FT224

¸HS9043/0
¸FD221 ¸FD221
¸HS9043/9
UHF UHF
VHF ¸FT224 UHF ¸SECOS VHF ¸FT224 UHF ¸SECOS UHF/VHF
HAVE QUICK II HAVE QUICK II guard RX

¸GT40xx

¸M3SR Series4400 ¸M3SR Series4400 ¸M3SR Series4400 ¸M3SR Series4400 ¸M3SR Series4400

10 MHz
reference
PBX
frequency
PSTN

WAN
¸GW5420 telephony gateway

R&S®GB5400 R&S®GB5400
controller working controller working R&S®GB4000C R&S®GB4000V Management Recorder VoIP phone
positions (CWP) position system

Operator positions with ¸VCS-4G CWPs as well as ¸GB4000V and ¸GB4000C control units

14
REMOTE CONTROL AND
­MONITORING OF RADIOS
A vast majority of the military and civil ATC radios w
­ ithin R&S®RCMS II is designed for monitoring scenarios rang-
a country are interlinked via secure networks. These ing from individual airports to nationwide systems. The
networks enable the monitoring and remote control of radios are shown in both a tree view and a map view. The
­nationwide ground/air/ground communications systems. map view shows the location and basic configuration of
­Depending on the requirements, multiple remote control each radio. Individual radios can be quickly selected and
and monitoring stations are deployed. managed. For users who wish to perform their own statis-
tical analysis, R&S®RCMS II records the relevant data and
The R&S®RCMS II system provides centralized and decen- makes it available via a data export interface. R&S®RCMS II
tralized remote control and monitoring of Rohde & Schwarz can be flexibly configured for specific radios. The remote
radios from one or more sites. Operators can use this soft- control and monitoring of a nationwide system is carried
ware solution to cost-effectively and ­rapidly respond to out from a central station. For maintenance purposes,
­error conditions and to configure ­operational parameters R&S®RCMS II clients are deployed at the radio sites.
for the respective scenarios. Additional Rohde & Schwarz radios can be brought into the
R&S®RCMS II system quickly and easily.

Monitoring and remote control of a nationwide ground/air/ground radio system

Central control and maintenance center Radio sites

R&S®RCMS II
server
Ethernet
R&S®RCMS II switch
client

R&S®RCMS II
client

IP wide area
network
Regional control and maintenance center

R&S®RCMS II
server

Ethernet
switch
R&S®RCMS II
client R&S®RCMS II
remote client

Rohde & Schwarz R&S®M3SR Series4400 Radios 15

VOICE OVER INTERNET PROTOCOL
(VoIP)
The R&S®M3SR Series4400 radios offer a voice over IP IP based VCS
(VoIP) interface in addition to the analog ports. VoIP oper- The R&S®M3SR Series4400 radios can be used together
ates on a standard IP infrastructure and eliminates the with the R&S®VCS-4G voice communications system
need for conventional analog infrastructures. (VCS), as shown in the figure below. The R&S®VCS-4G
takes full advantage of IP technology to provide a scalable,
The R&S®M3SR VoIP solution is based on the EUROCAE cost-effective solution. It supports VCS services, such as
ED-137 VoIP standard. air-to-ground communications, intercom and telephony
services. The IP‑based distributed architecture provides
Signals such as PTT and squelch are also transmitted via additional benefits, such as the integration of new services
VoIP, making such systems much easier and less expen- and pay-as-you-grow scalability. The R&S®VCS‑4G is com-
sive to connect. Redundancy can be economically and pliant with EUROCAE ED-137.
effectively built into the infrastructure.

The radio's analog interfaces remain active and can be

used as usual.

Application scenarios for Rohde & Schwarz VoIP solutions

R&S®M3SR Series4400

LAN

R&S®GB4000C R&S®GB4000V
Mobile tower/airfield control
WAN

R&S®M3SR Series4400
¸DB5400
Remote radio station
database
with R&S®M3SR radios

Recorder
LAN LAN
Recorder
••• •••
Management
R&S®GB5400 R&S®GB5400 R&S®GB5400 R&S®GB5400 R&S®GB5400 R&S®GB5400 terminal
controller working controller working controller working controller controller controller
position position position working working working
¸RS5400
position position position
radio server

Tower system with ¸VCS-4G Area control center with ¸VCS-4G

16
R&S®GB4000C/R&S®GB4000V pairing for VoIP operation This functionality is very easy to set up and adjust. It
An R&S®GB4000C remote control unit and an requires extremely little space and is deployed in con-
R&S®GB4000V audio unit are configured as a functional ventional IP networks. The pairing functionality is ideal
pair for VoIP operation. This functionality allows auto- for small radiocommunications systems in shelters or on
matic VoIP link establishment between a radio and a small ships. Since the ­remote control unit and audio unit
­remote R&S®GB4000V audio unit. Selecting a radio via the are separate, they can be ­installed at different locations for
R&S®GB4000C remote control unit automatically forces optimal, flexible use.
the R&S®GB4000V audio unit to establish a VoIP session
with the selected radio. Interoperability
EUROCAE issued the ED-137 standard, which specifies
The R&S®GB4000C/R&S®GB4000V pairing for VoIP opera- the use of IP for voice communications in ATC environ-
tion is used in mobile tower/airfield control solutions as ments. This standard was defined jointly by EUROCAE,
given in the application scenario. ATC authorities and ATC equipment manufacturers. Users
who select equipment that meets this standard can be
assured that the various system components interoperate
properly with one another.

R&S®GB4000V
audio unit

R&S®GB4000C/R&S®GB4000V pairing for VoIP operation

Ethernet

Ethernet
switch

•
•
•
¸M3SR Series4400 radios
¸GB4000C ¸GB4000V
remote control unit audio unit
¸GB4000C/¸GB4000V pairing

Rohde & Schwarz R&S®M3SR Series4400 Radios 17

HIGH DATA RATE NETWORK
SOLUTIONS
The demand for high data rates is constantly growing carried out by the R&S®M3SR Series4400 radios. These
along with the volume of accumulated data. This calls for types of data transmission concepts open up a wide range
transmission methods that provide high data rates at the of different naval and ground based applications. E
­ xisting
lowest possible RF bandwidth. The high data rate (HDR) R&S®M3SR ­Series4400 radios can be extended with an
concept of the R&S®M3SR ­Series4400 radio family meets R&S®UX4401 IF converter interface.
this need.
The figure below illustrates a typical maritime
The optional R&S®UX4401 70 MHz IF converter interface HDR communications network established with
is used to connect commercially available data modems R&S®M3SR ­­Series4400 radios. Such maritime networks
with IF interfaces to the R&S®M3SR Series4400 radio provide data communications between multiple nodes.
­family. Conversion of the IF signal to the UHF band is

Maritime network

High data rate network

Coastal
radio station 1 Mobile coastal
Coastal radio station
radio station 2
Server Application Net management

Ethernet Ethernet Ethernet

Switch Switch

Wireless
Ethernet LAN/WAN
Router

18
PRODUCT OVERVIEW
Designation Type
Transceiver with fixed frequency functionality
VHF/UHF transceiver, with local control unit, OCXO, ruggedized R&S®XT4410A
Transceiver with EPM (ECCM) functionalities
VHF/UHF transceiver, with HAVE QUICK II and R&S®SECOS 5/16, with local control unit, OCXO, ruggedized R&S®XT4410E
VHF/UHF transceiver, with R&S®SECOS 2/12, with local control unit, OCXO, ruggedized R&S®XT4410K
VHF/UHF transceiver, with R&S®SECOS 5/16, with local control unit, OCXO, ruggedized R&S®XT4410L
VHF/UHF transceiver, with HAVE QUICK II, with local control unit, OCXO, ruggedized R&S®XT4410J
VHF/UHF transceiver, with SATURN/HAVE QUICK II, with local control unit, OCXO, r­ uggedized R&S®XT4410M
Radio hardware options
Mountable control panel R&S®GB4000C
VHF/UHF guard receiver R&S®ET4400G
UHF EPM filter R&S®FD4430
UHF 70 MHz upconverter/downconverter interface R&S®UX4401
UHF circulator with VHF bypass R&S®GD4400
Various RX antenna interfaces R&S®GI4403
Radio software options
License for TDMA support R&S®GS4400TD
License for SPC interface support (for LINK 22) R&S®GS4400SP
License for voice over internet protocol (VoIP) support R&S®GS4400VP
License for multitone modem support R&S®GS4400MT
Accessories
Mating connector sets, power supplies and remote control unit
Mating connector set, suitable for all R&S®M3SR Series4400 ­radios, with/without circular connector R&S®ZF4410
Power supply, AC/DC, front panel with dust filter and prepared for IP 32, ­ruggedized, 19", 1 HU R&S®IN4000A
Power supply cable, R&S®M3SR Series4400 ↔ R&S®IN4000A, length: 0.5 m/1 m/2.5 m R&S®GK4103
Control panel for R&S®M3SR, without audio, with software and LAN, DC, r­ uggedized R&S®GB4000C
Mating connector set for R&S®GB4000C R&S®ZF4410
Audio accessories
Audio unit for R&S®M3SR Series4400 (analog/VoIP), front panel, ¼ 19"; for one headset (NF-7 connector) R&S®GB4000V
Mating connector set for R&S®GB4000V R&S®ZF4000V
Headset, including microphone, ruggedized, with cable and NF-7 connector R&S®GA012
Headset, dynamic, with cable and NF-7 connector; with active guard R&S®GA015
Headset, dynamic, with cable and NF-7 connector; without active guard R&S®GA015A
Microphone, with cable and NF-7 connector, handheld type R&S®GA016H1
Service and maintenance tool
Service and maintenance tool R&S®ZS4400
Radio test equipment
Base system, complete set of radio test equipment including system racks and base software suite R&S®UCS226XB
R&S®M3SR Series4400 BASE, system interface base, radio adaptation box and cabling set,
R&S®UCS-B10
including specific radio test software package
Timing system
SecureSync timing system, Rubidium standard, 3 × 10 MHz, 1 × STANAG/HQ output R&S®GT4031

Available equipment as listed, other equipment on request.

The radio systems described are hardware- and software-configurable. The system delivered has the configuration as
confirmed in the order.

Your local Rohde & Schwarz expert will help you determine the optimum solution for your requirements.
To find your nearest Rohde & Schwarz representative, visit www.sales.rohde-schwarz.com

Rohde & Schwarz R&S®M3SR Series4400 Radios 19

 Rohde & Schwarz
Service that adds value The Rohde & Schwarz technology group is among the
► Worldwide trailblazers when it comes to paving the way for a safer
► Local and personalized and connected world with its leading solutions in test
► Customized and flexible and measurement, technology systems, and networks
► Uncompromising quality
► Long-term dependability and cybersecurity. Founded more than 85 years ago, the
group is a reliable partner for industry and government
customers around the globe. The independent company
is headquartered in Munich, Germany and has an exten-
sive sales and service network with locations in more than
70 countries.

www.rohde-schwarz.com

Sustainable product design

► Environmental compatibility and eco-footprint
► Energy efficiency and low emissions
► Longevity and optimized total cost of ownership

Certified Quality Management Certified Environmental Management

ISO 9001 ISO 14001

Certified Quality Management

AQAP-2110

Rohde & Schwarz training

www.training.rohde-schwarz.com

Rohde & Schwarz customer support

www.rohde-schwarz.com/support

0758109312
0758.1093.12 09.00 PDP/PDW 1 en

R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG

Trade names are trademarks of the owners
PD 0758.1093.12 | Version 09.00 | June 2021 (ch)
R&S®M3SR Series4400 Radios
Data without tolerance limits is not binding | Subject to change
© 2007 - 2021 Rohde & Schwarz GmbH & Co. KG | 81671 Munich, Germany